xref: /netbsd/sys/arch/mvme68k/dev/zs_pcctwo.c (revision ce099b40)
1 /*	$NetBSD: zs_pcctwo.c,v 1.14 2008/04/28 20:23:29 martin Exp $	*/
2 
3 /*-
4  * Copyright (c) 2000 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Gordon W. Ross, Jason R. Thorpe and Steve C. Woodford.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 /*
33  * Zilog Z8530 Dual UART driver (machine-dependent part)
34  *
35  * Runs two serial lines per chip using slave drivers.
36  * Plain tty/async lines use the zs_async slave.
37  *
38  * Modified for NetBSD/mvme68k by Jason R. Thorpe <thorpej@NetBSD.org>
39  *
40  * Modified to attach to the PCCchip2/MCchip backend by Steve Woodford.
41  */
42 
43 #include <sys/cdefs.h>
44 __KERNEL_RCSID(0, "$NetBSD: zs_pcctwo.c,v 1.14 2008/04/28 20:23:29 martin Exp $");
45 
46 #include <sys/param.h>
47 #include <sys/systm.h>
48 #include <sys/proc.h>
49 #include <sys/device.h>
50 #include <sys/conf.h>
51 #include <sys/file.h>
52 #include <sys/ioctl.h>
53 #include <sys/tty.h>
54 #include <sys/time.h>
55 #include <sys/kernel.h>
56 #include <sys/syslog.h>
57 
58 #include <dev/cons.h>
59 #include <dev/ic/z8530reg.h>
60 #include <machine/z8530var.h>
61 
62 #include <machine/cpu.h>
63 #include <machine/bus.h>
64 
65 #include <dev/mvme/pcctworeg.h>
66 #include <dev/mvme/pcctwovar.h>
67 
68 #include <mvme68k/dev/mainbus.h>
69 #include <mvme68k/dev/zsvar.h>
70 
71 #include "ioconf.h"
72 
73 /* Definition of the driver for autoconfig. */
74 static int	zsc_pcctwo_match(device_t, cfdata_t, void *);
75 static void	zsc_pcctwo_attach(device_t, device_t, void *);
76 
77 CFATTACH_DECL_NEW(zsc_pcctwo, sizeof(struct zsc_softc),
78     zsc_pcctwo_match, zsc_pcctwo_attach, NULL, NULL);
79 
80 cons_decl(zsc_pcctwo);
81 
82 
83 /*
84  * Is the zs chip present?
85  */
86 static int
zsc_pcctwo_match(device_t parent,cfdata_t cf,void * aux)87 zsc_pcctwo_match(device_t parent, cfdata_t cf, void *aux)
88 {
89 	struct pcctwo_attach_args *pa = aux;
90 
91 	if (strcmp(pa->pa_name, zsc_cd.cd_name) ||
92 	    (machineid != MVME_162 && machineid != MVME_172))
93 		return 0;
94 
95 	pa->pa_ipl = cf->pcctwocf_ipl;
96 	if (pa->pa_ipl == -1)
97 		pa->pa_ipl = ZSHARD_PRI;
98 	return 1;
99 }
100 
101 /*
102  * Attach a found zs.
103  */
104 static void
zsc_pcctwo_attach(device_t parent,device_t self,void * aux)105 zsc_pcctwo_attach(device_t parent, device_t self, void *aux)
106 {
107 	struct zsc_softc *zsc = device_private(self);
108 	struct pcctwo_attach_args *pa = aux;
109 	struct zsdevice zs;
110 	bus_space_handle_t bush;
111 	int zs_level;
112 	static int vector = MCCHIPV_ZS0;
113 
114 	zsc->zsc_dev = self;
115 
116 	/* Map the device's registers */
117 	bus_space_map(pa->pa_bust, pa->pa_offset, 8, 0, &bush);
118 
119 	zs_level = pa->pa_ipl;
120 
121 	/* XXX: This is a gross hack. I need to bus-space zs.c ... */
122 	zs.zs_chan_b.zc_csr = (volatile uint8_t *)bush + 1;
123 	zs.zs_chan_b.zc_data = (volatile uint8_t *)bush + 3;
124 	zs.zs_chan_a.zc_csr = (volatile uint8_t *)bush + 5;
125 	zs.zs_chan_a.zc_data = (volatile uint8_t *)bush + 7;
126 
127 	/* Do common parts of SCC configuration. */
128 	zs_config(zsc, &zs, vector + PCCTWO_VECBASE, PCLK_162);
129 
130 	evcnt_attach_dynamic(&zsc->zsc_evcnt, EVCNT_TYPE_INTR,
131 	    pcctwointr_evcnt(zs_level), "rs232", device_xname(zsc->zsc_dev));
132 
133 	/*
134 	 * Now safe to install interrupt handlers.
135 	 */
136 	pcctwointr_establish(vector++, zshard_unshared, zs_level, zsc, NULL);
137 
138 	/*
139 	 * Set master interrupt enable.
140 	 */
141 	zs_write_reg(zsc->zsc_cs[0], 9, zs_init_reg[9]);
142 }
143 
144 /****************************************************************
145  * Console support functions (MVME PCC specific!)
146  ****************************************************************/
147 
148 /*
149  * Check for SCC console.  The MVME-1x2 always uses unit 0 chan 0.
150  */
151 void
zsc_pcctwocnprobe(struct consdev * cp)152 zsc_pcctwocnprobe(struct consdev *cp)
153 {
154 	extern const struct cdevsw zstty_cdevsw;
155 
156 	if (machineid != MVME_162 && machineid != MVME_172) {
157 		cp->cn_pri = CN_DEAD;
158 		return;
159 	}
160 
161 	/* Initialize required fields. */
162 	cp->cn_dev = makedev(cdevsw_lookup_major(&zstty_cdevsw), 0);
163 	cp->cn_pri = CN_NORMAL;
164 }
165 
166 void
zsc_pcctwocninit(struct consdev * cp)167 zsc_pcctwocninit(struct consdev *cp)
168 {
169 	bus_space_handle_t bush;
170 	struct zsdevice zs;
171 
172 	bus_space_map(&_mainbus_space_tag,
173 	    intiobase_phys + MAINBUS_PCCTWO_OFFSET + MCCHIP_ZS0_OFF, 8, 0,
174 	    &bush);
175 
176 	/* XXX: This is a gross hack. I need to bus-space zs.c ... */
177 	zs.zs_chan_b.zc_csr = (volatile uint8_t *)bush + 1;
178 	zs.zs_chan_b.zc_data = (volatile uint8_t *)bush + 3;
179 	zs.zs_chan_a.zc_csr = (volatile uint8_t *)bush + 5;
180 	zs.zs_chan_a.zc_data = (volatile uint8_t *)bush + 7;
181 
182 	/* Do common parts of console init. */
183 	zs_cnconfig(0, 0, &zs, PCLK_162);
184 }
185