1 /*
2  * drivers/mmc/sh-sdhi.h
3  *
4  * SD/MMC driver for Reneas rmobile ARM SoCs
5  *
6  * Copyright (C) 2013-2014 Renesas Electronics Corporation
7  * Copyright (C) 2008-2009 Renesas Solutions Corp.
8  *
9  * SPDX-License-Identifier:	GPL-2.0
10  */
11 
12 #ifndef _SH_SDHI_H
13 #define _SH_SDHI_H
14 
15 #define SDHI_CMD			(0x0000 >> 1)
16 #define SDHI_PORTSEL			(0x0004 >> 1)
17 #define SDHI_ARG0			(0x0008 >> 1)
18 #define SDHI_ARG1			(0x000C >> 1)
19 #define SDHI_STOP			(0x0010 >> 1)
20 #define SDHI_SECCNT			(0x0014 >> 1)
21 #define SDHI_RSP00			(0x0018 >> 1)
22 #define SDHI_RSP01			(0x001C >> 1)
23 #define SDHI_RSP02			(0x0020 >> 1)
24 #define SDHI_RSP03			(0x0024 >> 1)
25 #define SDHI_RSP04			(0x0028 >> 1)
26 #define SDHI_RSP05			(0x002C >> 1)
27 #define SDHI_RSP06			(0x0030 >> 1)
28 #define SDHI_RSP07			(0x0034 >> 1)
29 #define SDHI_INFO1			(0x0038 >> 1)
30 #define SDHI_INFO2			(0x003C >> 1)
31 #define SDHI_INFO1_MASK			(0x0040 >> 1)
32 #define SDHI_INFO2_MASK			(0x0044 >> 1)
33 #define SDHI_CLK_CTRL			(0x0048 >> 1)
34 #define SDHI_SIZE			(0x004C >> 1)
35 #define SDHI_OPTION			(0x0050 >> 1)
36 #define SDHI_ERR_STS1			(0x0058 >> 1)
37 #define SDHI_ERR_STS2			(0x005C >> 1)
38 #define SDHI_BUF0			(0x0060 >> 1)
39 #define SDHI_SDIO_MODE			(0x0068 >> 1)
40 #define SDHI_SDIO_INFO1			(0x006C >> 1)
41 #define SDHI_SDIO_INFO1_MASK		(0x0070 >> 1)
42 #define SDHI_CC_EXT_MODE		(0x01B0 >> 1)
43 #define SDHI_SOFT_RST			(0x01C0 >> 1)
44 #define SDHI_VERSION			(0x01C4 >> 1)
45 #define SDHI_HOST_MODE			(0x01C8 >> 1)
46 #define SDHI_SDIF_MODE			(0x01CC >> 1)
47 #define SDHI_EXT_SWAP			(0x01E0 >> 1)
48 #define SDHI_SD_DMACR			(0x0324 >> 1)
49 
50 /* SDHI CMD VALUE */
51 #define CMD_MASK			0x0000ffff
52 #define SDHI_APP			0x0040
53 #define SDHI_SD_APP_SEND_SCR		0x0073
54 #define SDHI_SD_SWITCH			0x1C06
55 
56 /* SDHI_PORTSEL */
57 #define USE_1PORT			(1 << 8) /* 1 port */
58 
59 /* SDHI_ARG */
60 #define ARG0_MASK			0x0000ffff
61 #define ARG1_MASK			0x0000ffff
62 
63 /* SDHI_STOP */
64 #define STOP_SEC_ENABLE			(1 << 8)
65 
66 /* SDHI_INFO1 */
67 #define INFO1_RESP_END			(1 << 0)
68 #define INFO1_ACCESS_END		(1 << 2)
69 #define INFO1_CARD_RE			(1 << 3)
70 #define INFO1_CARD_IN			(1 << 4)
71 #define INFO1_ISD0CD			(1 << 5)
72 #define INFO1_WRITE_PRO			(1 << 7)
73 #define INFO1_DATA3_CARD_RE		(1 << 8)
74 #define INFO1_DATA3_CARD_IN		(1 << 9)
75 #define INFO1_DATA3			(1 << 10)
76 
77 /* SDHI_INFO2 */
78 #define INFO2_CMD_ERROR			(1 << 0)
79 #define INFO2_CRC_ERROR			(1 << 1)
80 #define INFO2_END_ERROR			(1 << 2)
81 #define INFO2_TIMEOUT			(1 << 3)
82 #define INFO2_BUF_ILL_WRITE		(1 << 4)
83 #define INFO2_BUF_ILL_READ		(1 << 5)
84 #define INFO2_RESP_TIMEOUT		(1 << 6)
85 #define INFO2_SDDAT0			(1 << 7)
86 #define INFO2_BRE_ENABLE		(1 << 8)
87 #define INFO2_BWE_ENABLE		(1 << 9)
88 #define INFO2_CBUSY			(1 << 14)
89 #define INFO2_ILA			(1 << 15)
90 #define INFO2_ALL_ERR			(0x807f)
91 
92 /* SDHI_INFO1_MASK */
93 #define INFO1M_RESP_END			(1 << 0)
94 #define INFO1M_ACCESS_END		(1 << 2)
95 #define INFO1M_CARD_RE			(1 << 3)
96 #define INFO1M_CARD_IN			(1 << 4)
97 #define INFO1M_DATA3_CARD_RE		(1 << 8)
98 #define INFO1M_DATA3_CARD_IN		(1 << 9)
99 #define INFO1M_ALL			(0xffff)
100 #define INFO1M_SET			(INFO1M_RESP_END |	\
101 					INFO1M_ACCESS_END |	\
102 					INFO1M_DATA3_CARD_RE |	\
103 					INFO1M_DATA3_CARD_IN)
104 
105 /* SDHI_INFO2_MASK */
106 #define INFO2M_CMD_ERROR		(1 << 0)
107 #define INFO2M_CRC_ERROR		(1 << 1)
108 #define INFO2M_END_ERROR		(1 << 2)
109 #define INFO2M_TIMEOUT			(1 << 3)
110 #define INFO2M_BUF_ILL_WRITE		(1 << 4)
111 #define INFO2M_BUF_ILL_READ		(1 << 5)
112 #define INFO2M_RESP_TIMEOUT		(1 << 6)
113 #define INFO2M_BRE_ENABLE		(1 << 8)
114 #define INFO2M_BWE_ENABLE		(1 << 9)
115 #define INFO2M_ILA			(1 << 15)
116 #define INFO2M_ALL			(0xffff)
117 #define INFO2M_ALL_ERR			(0x807f)
118 
119 /* SDHI_CLK_CTRL */
120 #define CLK_ENABLE			(1 << 8)
121 
122 /* SDHI_OPTION */
123 #define OPT_BUS_WIDTH_1			(1 << 15)	/* bus width = 1 bit */
124 
125 /* SDHI_ERR_STS1 */
126 #define ERR_STS1_CRC_ERROR		((1 << 11) | (1 << 10) | (1 << 9) | \
127 					(1 << 8) | (1 << 5))
128 #define ERR_STS1_CMD_ERROR		((1 << 4) | (1 << 3) | (1 << 2) | \
129 					(1 << 1) | (1 << 0))
130 
131 /* SDHI_ERR_STS2 */
132 #define ERR_STS2_RES_TIMEOUT		(1 << 0)
133 #define ERR_STS2_RES_STOP_TIMEOUT	((1 << 0) | (1 << 1))
134 #define ERR_STS2_SYS_ERROR		((1 << 6) | (1 << 5) | (1 << 4) | \
135 					(1 << 3) | (1 << 2) | (1 << 1) | \
136 					(1 << 0))
137 
138 /* SDHI_SDIO_MODE */
139 #define SDIO_MODE_ON			(1 << 0)
140 #define SDIO_MODE_OFF			(0 << 0)
141 
142 /* SDHI_SDIO_INFO1 */
143 #define SDIO_INFO1_IOIRQ		(1 << 0)
144 #define SDIO_INFO1_EXPUB52		(1 << 14)
145 #define SDIO_INFO1_EXWT			(1 << 15)
146 
147 /* SDHI_SDIO_INFO1_MASK */
148 #define SDIO_INFO1M_CLEAR		((1 << 1) | (1 << 2))
149 #define SDIO_INFO1M_ON			((1 << 15) | (1 << 14) | (1 << 2) | \
150 					 (1 << 1) | (1 << 0))
151 
152 /* SDHI_EXT_SWAP */
153 #define SET_SWAP			((1 << 6) | (1 << 7))	/* SWAP */
154 
155 /* SDHI_SOFT_RST */
156 #define SOFT_RST_ON			(0 << 0)
157 #define SOFT_RST_OFF			(1 << 0)
158 
159 #define	CLKDEV_SD_DATA			25000000	/* 25 MHz */
160 #define CLKDEV_HS_DATA			50000000	/* 50 MHz */
161 #define CLKDEV_MMC_DATA			20000000	/* 20MHz */
162 #define	CLKDEV_INIT			400000		/* 100 - 400 KHz */
163 
164 /* For quirk */
165 #define SH_SDHI_QUIRK_16BIT_BUF		(1)
166 int sh_sdhi_init(unsigned long addr, int ch, unsigned long quirks);
167 
168 #endif /* _SH_SDHI_H */
169