1 /**************************************************************************\
2  * Copyright (c) Kongsberg Oil & Gas Technologies AS
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions are
7  * met:
8  *
9  * Redistributions of source code must retain the above copyright notice,
10  * this list of conditions and the following disclaimer.
11  *
12  * Redistributions in binary form must reproduce the above copyright
13  * notice, this list of conditions and the following disclaimer in the
14  * documentation and/or other materials provided with the distribution.
15  *
16  * Neither the name of the copyright holder nor the names of its
17  * contributors may be used to endorse or promote products derived from
18  * this software without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24  * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 \**************************************************************************/
32 
33 #ifndef COIN_INTERNAL
34 #error this is a private header file
35 #endif /* !COIN_INTERNAL */
36 
37 #ifndef SO_SCALEUNIFORMDRAGGER_IV_H
38 #define SO_SCALEUNIFORMDRAGGER_IV_H
39 
40 static const char SCALEUNIFORMDRAGGER_draggergeometry[] =
41   "#Inventor V2.1 ascii\n"
42   "\n"
43   "\n"
44   "\n"
45   "DEF SCALEUNIFORM_INACTIVE_MATERIAL Material { diffuseColor 0.5 0.5 0.5  emissiveColor 0.5 0.5 0.5 }\n"
46   "DEF SCALEUNIFORM_ACTIVE_MATERIAL Material { diffuseColor 0.5 0.5 0  emissiveColor 0.5 0.5 0 }\n"
47   "DEF SCALEUNIFORM_FEEDBACK_MATERIAL Material { diffuseColor 0.5 0 0.5  emissiveColor 0.5 0 0.5 }\n"
48   "\n"
49   "\n"
50   "\n"
51   "DEF SCALEUNIFORM_SOLIDMARKER Cube { width 0.1  height 0.1  depth 0.1 }\n"
52   "\n"
53   "\n"
54   "\n"
55   "\n"
56   "DEF SCALEUNIFORM_DRAGPOINTS Group {\n"
57   "   Separator {\n"
58   "      Translation { translation -1.1 1.1 1.1 }\n"
59   "      USE SCALEUNIFORM_SOLIDMARKER\n"
60   "   }\n"
61   "   Separator {\n"
62   "      Translation { translation 1.1 1.1 1.1 }\n"
63   "      USE SCALEUNIFORM_SOLIDMARKER\n"
64   "   }\n"
65   "   Separator {\n"
66   "      Translation { translation 1.1 -1.1 1.1 }\n"
67   "      USE SCALEUNIFORM_SOLIDMARKER\n"
68   "   }\n"
69   "   Separator {\n"
70   "      Translation { translation -1.1 -1.1 1.1 }\n"
71   "      USE SCALEUNIFORM_SOLIDMARKER\n"
72   "   }\n"
73   "   Separator {\n"
74   "      Translation { translation -1.1 1.1 -1.1 }\n"
75   "      USE SCALEUNIFORM_SOLIDMARKER\n"
76   "   }\n"
77   "   Separator {\n"
78   "      Translation { translation 1.1 1.1 -1.1 }\n"
79   "      USE SCALEUNIFORM_SOLIDMARKER\n"
80   "   }\n"
81   "   Separator {\n"
82   "      Translation { translation 1.1 -1.1 -1.1 }\n"
83   "      USE SCALEUNIFORM_SOLIDMARKER\n"
84   "   }\n"
85   "   Separator {\n"
86   "      Translation { translation -1.1 -1.1 -1.1 }\n"
87   "      USE SCALEUNIFORM_SOLIDMARKER\n"
88   "   }\n"
89   "}\n"
90   "\n"
91   "DEF scaleUniformScaler Separator {\n"
92   "   USE SCALEUNIFORM_INACTIVE_MATERIAL\n"
93   "   USE SCALEUNIFORM_DRAGPOINTS\n"
94   "}\n"
95   "\n"
96   "DEF scaleUniformScalerActive Separator {\n"
97   "   USE SCALEUNIFORM_ACTIVE_MATERIAL\n"
98   "   USE SCALEUNIFORM_DRAGPOINTS\n"
99   "\n"
100   "\n"
101   "   DrawStyle { style LINES  lineWidth 1 }\n"
102   "   Cube { width 2.25  height 2.25  depth 2.25 }\n"
103   "}\n"
104   "\n"
105   "\n"
106   "\n"
107   "\n"
108   "\n"
109   "DEF SCALEUNIFORM_FEEDBACK_AXES Group {\n"
110   "   USE SCALEUNIFORM_FEEDBACK_MATERIAL\n"
111   "   DrawStyle { lineWidth 2 }\n"
112   "   Coordinate3 { point [ 1 0 0, -1 0 0, 0 1 0, 0 -1 0, 0 0 1, 0 0 -1 ] }\n"
113   "   IndexedLineSet { coordIndex [ 0, 1, -1, 2, 3, -1, 4, 5, -1 ] }\n"
114   "}\n"
115   "\n"
116   "DEF scaleUniformFeedback Separator {\n"
117   "   USE SCALEUNIFORM_FEEDBACK_AXES\n"
118   "}\n"
119   "DEF scaleUniformFeedbackActive Separator {\n"
120   "   USE SCALEUNIFORM_FEEDBACK_AXES\n"
121   "}\n";
122 
123 #endif /* ! SO_SCALEUNIFORMDRAGGER_IV_H */
124