1 /* $OpenBSD: trap.h,v 1.9 2022/10/22 00:58:56 gkoehler Exp $ */ 2 /* $NetBSD: trap.h,v 1.1 1996/09/30 16:34:35 ws Exp $ */ 3 4 /* 5 * Copyright (C) 1995, 1996 Wolfgang Solfrank. 6 * Copyright (C) 1995, 1996 TooLs GmbH. 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by TooLs GmbH. 20 * 4. The name of TooLs GmbH may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR 24 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 25 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 26 * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 28 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 29 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 30 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 31 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 32 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 #ifndef _POWERPC_TRAP_H_ 35 #define _POWERPC_TRAP_H_ 36 37 #define EXC_RSVD 0x0000 /* Reserved */ 38 #define EXC_RST 0x0100 /* Reset */ 39 #define EXC_MCHK 0x0200 /* Machine Check */ 40 #define EXC_DSI 0x0300 /* Data Storage Interrupt */ 41 #define EXC_ISI 0x0400 /* Instruction Storage Interrupt */ 42 #define EXC_EXI 0x0500 /* External Interrupt */ 43 #define EXC_ALI 0x0600 /* Alignment Interrupt */ 44 #define EXC_PGM 0x0700 /* Program Interrupt */ 45 #define EXC_FPU 0x0800 /* Floating-point Unavailable */ 46 #define EXC_DECR 0x0900 /* Decrementer Interrupt */ 47 #define EXC_SC 0x0c00 /* System Call */ 48 #define EXC_TRC 0x0d00 /* Trace */ 49 #define EXC_FPA 0x0e00 /* Floating-point Assist */ 50 #define EXC_PERF 0x0f00 /* Performance Monitoring */ 51 #define EXC_VEC 0x0f20 /* AltiVec Unavailable */ 52 #define EXC_BPT 0x1300 /* Instruction Breakpoint */ 53 #define EXC_SMI 0x1400 /* System Management Interrupt */ 54 #define EXC_VECAST_G4 0x1600 /* AltiVec Assist */ 55 #define EXC_VECAST_G5 0x1700 /* AltiVec Assist */ 56 57 /* And these are only on the 603: */ 58 #define EXC_IMISS 0x1000 /* Instruction translation miss */ 59 #define EXC_DLMISS 0x1100 /* Data load translation miss */ 60 #define EXC_DSMISS 0x1200 /* Data store translation miss */ 61 62 #define EXC_END 0x3000 /* End of exception vectors */ 63 64 #define EXC_AST 0x3000 /* Fake AST vector */ 65 66 /* Trap was in user mode */ 67 #define EXC_USER 0x10000 68 69 /* 70 * EXC_ALI sets bits in the DSISR and DAR to provide enough 71 * information to recover from the unaligned access without needing to 72 * parse the offending instruction. This includes certain bits of the 73 * opcode, and information about what registers are used. The opcode 74 * indicator values below come from Appendix F of Book III of "The 75 * PowerPC Architecture". 76 */ 77 78 #define EXC_ALI_OPCODE_INDICATOR(dsisr) ((dsisr >> 10) & 0x7f) 79 #define EXC_ALI_LFD 0x09 80 #define EXC_ALI_STFD 0x0b 81 #define EXC_ALI_DCBZ 0x5f 82 83 /* Macros to extract register information */ 84 #define EXC_ALI_RST(dsisr) ((dsisr >> 5) & 0x1f) /* source or target */ 85 #define EXC_ALI_RA(dsisr) (dsisr & 0x1f) 86 87 #endif /* _POWERPC_TRAP_H_ */ 88