/dports/net-im/dendrite/dendrite-0.5.1/vendor/github.com/ipfs/go-log/v2/ |
H A D | core_test.go | 58 core1 := newCore(PlaintextOutput, zapcore.AddSync(buf1), LevelDebug) 59 mc.AddCore(core1) 94 core1 := newCore(PlaintextOutput, zapcore.AddSync(buf1), LevelDebug) 95 mc.AddCore(core1) 113 mc.DeleteCore(core1) 145 core1 := newCore(PlaintextOutput, zapcore.AddSync(buf1), LevelDebug) 146 mc.AddCore(core1) 163 mc.ReplaceCore(core1, core2)
|
/dports/emulators/qemu-utils/qemu-4.2.1/roms/u-boot-sam460ex/doc/ |
H A D | README.p2020rdb | 81 2. Build kernel image for core1: 92 and set it to 0x20000000, asssuming core1 will 101 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 109 4. Create dtb for core1: 121 b. Bring up core1's kernel first: 124 => tftp 21000000 uImage.core1 144 Please note only core0 will run u-boot, core1 starts kernel directly
|
H A D | README.mpc8572ds | 109 2. Build kernel image for core1: 118 set it to 0x20000000, asssuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run u-boot, core1 starts kernel directly after
|
/dports/emulators/qemu5/qemu-5.2.0/roms/u-boot-sam460ex/doc/ |
H A D | README.p2020rdb | 81 2. Build kernel image for core1: 92 and set it to 0x20000000, asssuming core1 will 101 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 109 4. Create dtb for core1: 121 b. Bring up core1's kernel first: 124 => tftp 21000000 uImage.core1 144 Please note only core0 will run u-boot, core1 starts kernel directly
|
H A D | README.mpc8572ds | 109 2. Build kernel image for core1: 118 set it to 0x20000000, asssuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run u-boot, core1 starts kernel directly after
|
/dports/emulators/qemu-powernv/qemu-powernv-3.0.50/roms/u-boot-sam460ex/doc/ |
H A D | README.p2020rdb | 81 2. Build kernel image for core1: 92 and set it to 0x20000000, asssuming core1 will 101 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 109 4. Create dtb for core1: 121 b. Bring up core1's kernel first: 124 => tftp 21000000 uImage.core1 144 Please note only core0 will run u-boot, core1 starts kernel directly
|
H A D | README.mpc8572ds | 109 2. Build kernel image for core1: 118 set it to 0x20000000, asssuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run u-boot, core1 starts kernel directly after
|
/dports/emulators/qemu42/qemu-4.2.1/roms/u-boot-sam460ex/doc/ |
H A D | README.p2020rdb | 81 2. Build kernel image for core1: 92 and set it to 0x20000000, asssuming core1 will 101 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 109 4. Create dtb for core1: 121 b. Bring up core1's kernel first: 124 => tftp 21000000 uImage.core1 144 Please note only core0 will run u-boot, core1 starts kernel directly
|
H A D | README.mpc8572ds | 109 2. Build kernel image for core1: 118 set it to 0x20000000, asssuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run u-boot, core1 starts kernel directly after
|
/dports/emulators/qemu-guest-agent/qemu-5.0.1/roms/u-boot-sam460ex/doc/ |
H A D | README.p2020rdb | 81 2. Build kernel image for core1: 92 and set it to 0x20000000, asssuming core1 will 101 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 109 4. Create dtb for core1: 121 b. Bring up core1's kernel first: 124 => tftp 21000000 uImage.core1 144 Please note only core0 will run u-boot, core1 starts kernel directly
|
H A D | README.mpc8572ds | 109 2. Build kernel image for core1: 118 set it to 0x20000000, asssuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run u-boot, core1 starts kernel directly after
|
/dports/emulators/qemu/qemu-6.2.0/roms/u-boot-sam460ex/doc/ |
H A D | README.p2020rdb | 81 2. Build kernel image for core1: 92 and set it to 0x20000000, asssuming core1 will 101 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 109 4. Create dtb for core1: 121 b. Bring up core1's kernel first: 124 => tftp 21000000 uImage.core1 144 Please note only core0 will run u-boot, core1 starts kernel directly
|
H A D | README.mpc8572ds | 109 2. Build kernel image for core1: 118 set it to 0x20000000, asssuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run u-boot, core1 starts kernel directly after
|
/dports/emulators/qemu60/qemu-6.0.0/roms/u-boot-sam460ex/doc/ |
H A D | README.p2020rdb | 81 2. Build kernel image for core1: 92 and set it to 0x20000000, asssuming core1 will 101 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 109 4. Create dtb for core1: 121 b. Bring up core1's kernel first: 124 => tftp 21000000 uImage.core1 144 Please note only core0 will run u-boot, core1 starts kernel directly
|
H A D | README.mpc8572ds | 109 2. Build kernel image for core1: 118 set it to 0x20000000, asssuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run u-boot, core1 starts kernel directly after
|
/dports/emulators/qemu5/qemu-5.2.0/roms/u-boot/board/freescale/mpc8572ds/ |
H A D | README | 109 2. Build kernel image for core1: 118 set it to 0x20000000, assuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run U-Boot, core1 starts kernel directly after
|
/dports/emulators/qemu-guest-agent/qemu-5.0.1/roms/u-boot/board/freescale/mpc8572ds/ |
H A D | README | 109 2. Build kernel image for core1: 118 set it to 0x20000000, assuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run U-Boot, core1 starts kernel directly after
|
/dports/emulators/qemu42/qemu-4.2.1/roms/u-boot/board/freescale/mpc8572ds/ |
H A D | README | 109 2. Build kernel image for core1: 118 set it to 0x20000000, assuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run U-Boot, core1 starts kernel directly after
|
/dports/emulators/qemu-utils/qemu-4.2.1/roms/u-boot/board/freescale/mpc8572ds/ |
H A D | README | 109 2. Build kernel image for core1: 118 set it to 0x20000000, assuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run U-Boot, core1 starts kernel directly after
|
/dports/sysutils/u-boot-tools/u-boot-2020.07/board/freescale/mpc8572ds/ |
H A D | README | 109 2. Build kernel image for core1: 118 set it to 0x20000000, assuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run U-Boot, core1 starts kernel directly after
|
/dports/sysutils/u-boot-utilite/u-boot-2015.07/board/freescale/mpc8572ds/ |
H A D | README | 109 2. Build kernel image for core1: 118 set it to 0x20000000, assuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run u-boot, core1 starts kernel directly after
|
/dports/emulators/qemu60/qemu-6.0.0/roms/u-boot/board/freescale/mpc8572ds/ |
H A D | README | 109 2. Build kernel image for core1: 118 set it to 0x20000000, assuming core1 will start from 512MB. 126 d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 132 4. Create dtb for core1: 142 b. Bring up core1's kernel first: 145 => tftp 21000000 8572/uImage.core1 165 Please note only core0 will run U-Boot, core1 starts kernel directly after
|
/dports/sysutils/edk2/edk2-platforms-89f6170d/Silicon/Socionext/SynQuacer/DeviceTree/ |
H A D | SynQuacer.dtsi | 212 core1 { 220 core1 { 228 core1 { 236 core1 { 244 core1 { 252 core1 { 260 core1 { 268 core1 { 276 core1 { 284 core1 { [all …]
|
/dports/devel/boost-docs/boost_1_72_0/libs/graph/example/figs/ |
H A D | cc-internet.dot | 11 "core1-ord1-oc48.ord2.above.net" 42 "shub-e27.gw.nd.edu" -- "core1-ord1-oc48.ord2.above.net" 45 "above-bbn-45Mbps.ord.above.net" -- "core1-ord1-oc48.ord2.above.net" 46 "core1-ord1-oc48.ord2.above.net" -- "vabi1-gige-1-1.google.com"
|
/dports/devel/boost-python-libs/boost_1_72_0/libs/graph/example/figs/ |
H A D | cc-internet.dot | 11 "core1-ord1-oc48.ord2.above.net" 42 "shub-e27.gw.nd.edu" -- "core1-ord1-oc48.ord2.above.net" 45 "above-bbn-45Mbps.ord.above.net" -- "core1-ord1-oc48.ord2.above.net" 46 "core1-ord1-oc48.ord2.above.net" -- "vabi1-gige-1-1.google.com"
|