| /dports/sysutils/u-boot-olinuxino-lime/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-olinuxino-lime2/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-cubox-hummingboard/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-cubieboard2/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-cubieboard/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-firefly-rk3399/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-sinovoip-bpi-m3/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-a13-olinuxino/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-a64-olinuxino/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-sopine/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-rpi/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-qemu-arm64/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-nanopi-neo2/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-olimex-a20-som-evb/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-nanopi-m1plus/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-nanopi-r4s/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-nanopi-neo-air/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-beaglebone/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-chip/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-wandboard/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-clearfog/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-orangepi-zero-plus/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-orangepi-r1/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-orangepi-zero/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|
| /dports/sysutils/u-boot-pandaboard/u-boot-2021.07/drivers/serial/ |
| H A D | atmel_usart.c | 146 ulong usart_clk_rate; member
150 ulong usart_clk_rate, int baudrate) in _atmel_serial_set_brg() argument
154 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; in _atmel_serial_set_brg()
159 ulong usart_clk_rate, int baudrate) in _atmel_serial_init() argument
169 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); in _atmel_serial_init()
179 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); in atmel_serial_setbrg()
230 priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK; in atmel_serial_enable_clk()
256 priv->usart_clk_rate = clk_rate; in atmel_serial_enable_clk()
284 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); in atmel_serial_probe()
|