ena_com.h (revision adfed2d8) - OpenGrok cross reference for /freebsd/sys/contrib/ena-com/ena_com.h

/*-
 * SPDX-License-Identifier: BSD-3-Clause
 *
 * Copyright (c) 2015-2023 Amazon.com, Inc. or its affiliates.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * * Redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer.
 * * Redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in
 * the documentation and/or other materials provided with the
 * distribution.
 * * Neither the name of copyright holder nor the names of its
 * contributors may be used to endorse or promote products derived
 * from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef ENA_COM
#define ENA_COM

#include "ena_plat.h"

#define ENA_MAX_NUM_IO_QUEUES 128U
/* We need to queues for each IO (on for Tx and one for Rx) */
#define ENA_TOTAL_NUM_QUEUES (2 * (ENA_MAX_NUM_IO_QUEUES))

#define ENA_MAX_HANDLERS 256

#define ENA_MAX_PHYS_ADDR_SIZE_BITS 48

/* Unit in usec */
#define ENA_REG_READ_TIMEOUT 200000

#define ADMIN_SQ_SIZE(depth)	((depth) * sizeof(struct ena_admin_aq_entry))
#define ADMIN_CQ_SIZE(depth)	((depth) * sizeof(struct ena_admin_acq_entry))
#define ADMIN_AENQ_SIZE(depth)	((depth) * sizeof(struct ena_admin_aenq_entry))

#define ENA_CUSTOMER_METRICS_BUFFER_SIZE 512

/*****************************************************************************/
/*****************************************************************************/
/* ENA adaptive interrupt moderation settings */

#define ENA_INTR_INITIAL_TX_INTERVAL_USECS ENA_INTR_INITIAL_TX_INTERVAL_USECS_PLAT
#define ENA_INTR_INITIAL_RX_INTERVAL_USECS ENA_INTR_INITIAL_RX_INTERVAL_USECS_PLAT
#define ENA_DEFAULT_INTR_DELAY_RESOLUTION 1

#define ENA_HASH_KEY_SIZE 40

#define ENA_HW_HINTS_NO_TIMEOUT	0xFFFF

#define ENA_FEATURE_MAX_QUEUE_EXT_VER 1

struct ena_llq_configurations {
	enum ena_admin_llq_header_location llq_header_location;
	enum ena_admin_llq_ring_entry_size llq_ring_entry_size;
	enum ena_admin_llq_stride_ctrl  llq_stride_ctrl;
	enum ena_admin_llq_num_descs_before_header llq_num_decs_before_header;
	u16 llq_ring_entry_size_value;
};

enum queue_direction {
	ENA_COM_IO_QUEUE_DIRECTION_TX,
	ENA_COM_IO_QUEUE_DIRECTION_RX
};

struct ena_com_buf {
	dma_addr_t paddr; /**< Buffer physical address */
	u16 len; /**< Buffer length in bytes */
};

struct ena_com_rx_buf_info {
	u16 len;
	u16 req_id;
};

struct ena_com_io_desc_addr {
	u8 __iomem *pbuf_dev_addr; /* LLQ address */
	u8 *virt_addr;
	dma_addr_t phys_addr;
	ena_mem_handle_t mem_handle;
};

struct ena_com_tx_meta {
	u16 mss;
	u16 l3_hdr_len;
	u16 l3_hdr_offset;
	u16 l4_hdr_len; /* In words */
};

struct ena_com_llq_info {
	u16 header_location_ctrl;
	u16 desc_stride_ctrl;
	u16 desc_list_entry_size_ctrl;
	u16 desc_list_entry_size;
	u16 descs_num_before_header;
	u16 descs_per_entry;
	u16 max_entries_in_tx_burst;
	bool disable_meta_caching;
};

struct ena_com_io_cq {
	struct ena_com_io_desc_addr cdesc_addr;
	void *bus;

	/* Interrupt unmask register */
	u32 __iomem *unmask_reg;


	/* numa configuration register (for TPH) */
	u32 __iomem *numa_node_cfg_reg;

	/* The value to write to the above register to unmask
	 * the interrupt of this queue
	 */
	u32 msix_vector ____cacheline_aligned;

	enum queue_direction direction;

	/* holds the number of cdesc of the current packet */
	u16 cur_rx_pkt_cdesc_count;
	/* save the first cdesc idx of the current packet */
	u16 cur_rx_pkt_cdesc_start_idx;

	u16 q_depth;
	/* Caller qid */
	u16 qid;

	/* Device queue index */
	u16 idx;
	u16 head;
	u8 phase;
	u8 cdesc_entry_size_in_bytes;

} ____cacheline_aligned;

struct ena_com_io_bounce_buffer_control {
	u8 *base_buffer;
	u16 next_to_use;
	u16 buffer_size;
	u16 buffers_num;  /* Must be a power of 2 */
};

/* This struct is to keep tracking the current location of the next llq entry */
struct ena_com_llq_pkt_ctrl {
	u8 *curr_bounce_buf;
	u16 idx;
	u16 descs_left_in_line;
};

struct ena_com_io_sq {
	struct ena_com_io_desc_addr desc_addr;
	void *bus;

	u32 __iomem *db_addr;

	enum queue_direction direction;
	enum ena_admin_placement_policy_type mem_queue_type;

	bool disable_meta_caching;

	u32 msix_vector;
	struct ena_com_tx_meta cached_tx_meta;
	struct ena_com_llq_info llq_info;
	struct ena_com_llq_pkt_ctrl llq_buf_ctrl;
	struct ena_com_io_bounce_buffer_control bounce_buf_ctrl;

	u16 q_depth;
	u16 qid;

	u16 idx;
	u16 tail;
	u16 next_to_comp;
	u16 llq_last_copy_tail;
	u32 tx_max_header_size;
	u8 phase;
	u8 desc_entry_size;
	u8 dma_addr_bits;
	u16 entries_in_tx_burst_left;
} ____cacheline_aligned;

struct ena_com_admin_cq {
	struct ena_admin_acq_entry *entries;
	ena_mem_handle_t mem_handle;
	dma_addr_t dma_addr;

	u16 head;
	u8 phase;
};

struct ena_com_admin_sq {
	struct ena_admin_aq_entry *entries;
	ena_mem_handle_t mem_handle;
	dma_addr_t dma_addr;

	u32 __iomem *db_addr;

	u16 head;
	u16 tail;
	u8 phase;

};

struct ena_com_stats_admin {
	u64 aborted_cmd;
	u64 submitted_cmd;
	u64 completed_cmd;
	u64 out_of_space;
	u64 no_completion;
};

struct ena_com_stats_phc {
	u64 phc_cnt;
	u64 phc_exp;
	u64 phc_skp;
	u64 phc_err;
};

struct ena_com_admin_queue {
	void *q_dmadev;
	void *bus;
	struct ena_com_dev *ena_dev;
	ena_spinlock_t q_lock; /* spinlock for the admin queue */

	struct ena_comp_ctx *comp_ctx;
	u32 completion_timeout;
	u16 q_depth;
	struct ena_com_admin_cq cq;
	struct ena_com_admin_sq sq;

	/* Indicate if the admin queue should poll for completion */
	bool polling;

	/* Define if fallback to polling mode should occur */
	bool auto_polling;

	u16 curr_cmd_id;

	/* Indicate that the ena was initialized and can
	 * process new admin commands
	 */
	bool running_state;

	/* Count the number of outstanding admin commands */
	ena_atomic32_t outstanding_cmds;

	struct ena_com_stats_admin stats;
};

struct ena_aenq_handlers;

struct ena_com_aenq {
	u16 head;
	u8 phase;
	struct ena_admin_aenq_entry *entries;
	dma_addr_t dma_addr;
	ena_mem_handle_t mem_handle;
	u16 q_depth;
	struct ena_aenq_handlers *aenq_handlers;
};

struct ena_com_mmio_read {
	struct ena_admin_ena_mmio_req_read_less_resp *read_resp;
	dma_addr_t read_resp_dma_addr;
	ena_mem_handle_t read_resp_mem_handle;
	u32 reg_read_to; /* in us */
	u16 seq_num;
	bool readless_supported;
	/* spin lock to ensure a single outstanding read */
	ena_spinlock_t lock;
};

/* PTP hardware clock (PHC) MMIO read data info */
struct ena_com_phc_info {
	/* Internal PHC statistics */
	struct ena_com_stats_phc stats;

	/* PHC shared memory - virtual address */
	struct ena_admin_phc_resp *virt_addr;

	/* Spin lock to ensure a single outstanding PHC read */
	ena_spinlock_t lock;

	/* PHC doorbell address as an offset to PCIe MMIO REG BAR */
	u32 doorbell_offset;

	/* Shared memory read expire timeout (usec)
	 * Max time for valid PHC retrieval, passing this threshold will fail the get time request
	 * and block new PHC requests for block_timeout_usec in order to prevent floods on busy
	 * device
	 */
	u32 expire_timeout_usec;

	/* Shared memory read abort timeout (usec)
	 * PHC requests block period, blocking starts once PHC request expired in order to prevent
	 * floods on busy device, any PHC requests during block period will be skipped
	 */
	u32 block_timeout_usec;

	/* Request id sent to the device */
	u16 req_id;

	/* True if PHC is active in the device */
	bool active;

	/* PHC shared memory - memory handle */
	ena_mem_handle_t mem_handle;

	/* PHC shared memory - physical address */
	dma_addr_t phys_addr;
};

struct ena_rss {
	/* Indirect table */
	u16 *host_rss_ind_tbl;
	struct ena_admin_rss_ind_table_entry *rss_ind_tbl;
	dma_addr_t rss_ind_tbl_dma_addr;
	ena_mem_handle_t rss_ind_tbl_mem_handle;
	u16 tbl_log_size;

	/* Hash key */
	enum ena_admin_hash_functions hash_func;
	struct ena_admin_feature_rss_flow_hash_control *hash_key;
	dma_addr_t hash_key_dma_addr;
	ena_mem_handle_t hash_key_mem_handle;
	u32 hash_init_val;

	/* Flow Control */
	struct ena_admin_feature_rss_hash_control *hash_ctrl;
	dma_addr_t hash_ctrl_dma_addr;
	ena_mem_handle_t hash_ctrl_mem_handle;

};

struct ena_customer_metrics {
	/* in correlation with ENA_ADMIN_CUSTOMER_METRICS_SUPPORT_MASK
	 * and ena_admin_customer_metrics_id
	 */
	uint64_t supported_metrics;
	dma_addr_t buffer_dma_addr;
	void *buffer_virt_addr;
	ena_mem_handle_t buffer_dma_handle;
	u32 buffer_len;
};

struct ena_host_attribute {
	/* Debug area */
	u8 *debug_area_virt_addr;
	dma_addr_t debug_area_dma_addr;
	ena_mem_handle_t debug_area_dma_handle;
	u32 debug_area_size;

	/* Host information */
	struct ena_admin_host_info *host_info;
	dma_addr_t host_info_dma_addr;
	ena_mem_handle_t host_info_dma_handle;
};

/* Each ena_dev is a PCI function. */
struct ena_com_dev {
	struct ena_com_admin_queue admin_queue;
	struct ena_com_aenq aenq;
	struct ena_com_io_cq io_cq_queues[ENA_TOTAL_NUM_QUEUES];
	struct ena_com_io_sq io_sq_queues[ENA_TOTAL_NUM_QUEUES];
	u8 __iomem *reg_bar;
	void __iomem *mem_bar;
	void *dmadev;
	void *bus;
	ena_netdev *net_device;

	enum ena_admin_placement_policy_type tx_mem_queue_type;
	u32 tx_max_header_size;
	u16 stats_func; /* Selected function for extended statistic dump */
	u16 stats_queue; /* Selected queue for extended statistic dump */

	u32 ena_min_poll_delay_us;

	struct ena_com_mmio_read mmio_read;
	struct ena_com_phc_info phc;

	struct ena_rss rss;
	u32 supported_features;
	u32 capabilities;
	u32 dma_addr_bits;

	struct ena_host_attribute host_attr;
	bool adaptive_coalescing;
	u16 intr_delay_resolution;

	/* interrupt moderation intervals are in usec divided by
	 * intr_delay_resolution, which is supplied by the device.
	 */
	u32 intr_moder_tx_interval;
	u32 intr_moder_rx_interval;

	struct ena_intr_moder_entry *intr_moder_tbl;

	struct ena_com_llq_info llq_info;

	struct ena_customer_metrics customer_metrics;
};

struct ena_com_dev_get_features_ctx {
	struct ena_admin_queue_feature_desc max_queues;
	struct ena_admin_queue_ext_feature_desc max_queue_ext;
	struct ena_admin_device_attr_feature_desc dev_attr;
	struct ena_admin_feature_aenq_desc aenq;
	struct ena_admin_feature_offload_desc offload;
	struct ena_admin_ena_hw_hints hw_hints;
	struct ena_admin_feature_llq_desc llq;
};

struct ena_com_create_io_ctx {
	enum ena_admin_placement_policy_type mem_queue_type;
	enum queue_direction direction;
	int numa_node;
	u32 msix_vector;
	u16 queue_size;
	u16 qid;
};

typedef void (*ena_aenq_handler)(void *data,
	struct ena_admin_aenq_entry *aenq_e);

/* Holds aenq handlers. Indexed by AENQ event group */
struct ena_aenq_handlers {
	ena_aenq_handler handlers[ENA_MAX_HANDLERS];
	ena_aenq_handler unimplemented_handler;
};

/*****************************************************************************/
/*****************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif

/* ena_com_mmio_reg_read_request_init - Init the mmio reg read mechanism
 * @ena_dev: ENA communication layer struct
 *
 * Initialize the register read mechanism.
 *
 * @note: This method must be the first stage in the initialization sequence.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev);

/* ena_com_phc_init - Allocate and initialize PHC feature
 * @ena_dev: ENA communication layer struct
 * @note: This method assumes PHC is supported by the device
 * @return - 0 on success, negative value on failure
 */
int ena_com_phc_init(struct ena_com_dev *ena_dev);

/* ena_com_phc_supported - Return if PHC feature is supported by the device
 * @ena_dev: ENA communication layer struct
 * @note: This method must be called after getting supported features
 * @return - supported or not
 */
bool ena_com_phc_supported(struct ena_com_dev *ena_dev);

/* ena_com_phc_config - Configure PHC feature
 * @ena_dev: ENA communication layer struct
 * Configure PHC feature in driver and device
 * @note: This method assumes PHC is supported by the device
 * @return - 0 on success, negative value on failure
 */
int ena_com_phc_config(struct ena_com_dev *ena_dev);

/* ena_com_phc_destroy - Destroy PHC feature
 * @ena_dev: ENA communication layer struct
 */
void ena_com_phc_destroy(struct ena_com_dev *ena_dev);

/* ena_com_phc_get - Retrieve PHC timestamp
 * @ena_dev: ENA communication layer struct
 * @timestamp: Retrieve PHC timestamp
 * @return - 0 on success, negative value on failure
 */
int ena_com_phc_get(struct ena_com_dev *ena_dev, u64 *timestamp);

/* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism
 * @ena_dev: ENA communication layer struct
 * @readless_supported: readless mode (enable/disable)
 */
void ena_com_set_mmio_read_mode(struct ena_com_dev *ena_dev,
				bool readless_supported);

/* ena_com_mmio_reg_read_request_write_dev_addr - Write the mmio reg read return
 * value physical address.
 * @ena_dev: ENA communication layer struct
 */
void ena_com_mmio_reg_read_request_write_dev_addr(struct ena_com_dev *ena_dev);

/* ena_com_mmio_reg_read_request_destroy - Destroy the mmio reg read mechanism
 * @ena_dev: ENA communication layer struct
 */
void ena_com_mmio_reg_read_request_destroy(struct ena_com_dev *ena_dev);

/* ena_com_admin_init - Init the admin and the async queues
 * @ena_dev: ENA communication layer struct
 * @aenq_handlers: Those handlers to be called upon event.
 *
 * Initialize the admin submission and completion queues.
 * Initialize the asynchronous events notification queues.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_admin_init(struct ena_com_dev *ena_dev,
		       struct ena_aenq_handlers *aenq_handlers);

/* ena_com_admin_destroy - Destroy the admin and the async events queues.
 * @ena_dev: ENA communication layer struct
 *
 * @note: Before calling this method, the caller must validate that the device
 * won't send any additional admin completions/aenq.
 * To achieve that, a FLR is recommended.
 */
void ena_com_admin_destroy(struct ena_com_dev *ena_dev);

/* ena_com_dev_reset - Perform device FLR to the device.
 * @ena_dev: ENA communication layer struct
 * @reset_reason: Specify what is the trigger for the reset in case of an error.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_dev_reset(struct ena_com_dev *ena_dev,
		      enum ena_regs_reset_reason_types reset_reason);

/* ena_com_create_io_queue - Create io queue.
 * @ena_dev: ENA communication layer struct
 * @ctx - create context structure
 *
 * Create the submission and the completion queues.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_create_io_queue(struct ena_com_dev *ena_dev,
			    struct ena_com_create_io_ctx *ctx);

/* ena_com_destroy_io_queue - Destroy IO queue with the queue id - qid.
 * @ena_dev: ENA communication layer struct
 * @qid - the caller virtual queue id.
 */
void ena_com_destroy_io_queue(struct ena_com_dev *ena_dev, u16 qid);

/* ena_com_get_io_handlers - Return the io queue handlers
 * @ena_dev: ENA communication layer struct
 * @qid - the caller virtual queue id.
 * @io_sq - IO submission queue handler
 * @io_cq - IO completion queue handler.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_get_io_handlers(struct ena_com_dev *ena_dev, u16 qid,
			    struct ena_com_io_sq **io_sq,
			    struct ena_com_io_cq **io_cq);

/* ena_com_admin_aenq_enable - ENAble asynchronous event notifications
 * @ena_dev: ENA communication layer struct
 *
 * After this method, aenq event can be received via AENQ.
 */
void ena_com_admin_aenq_enable(struct ena_com_dev *ena_dev);

/* ena_com_set_admin_running_state - Set the state of the admin queue
 * @ena_dev: ENA communication layer struct
 *
 * Change the state of the admin queue (enable/disable)
 */
void ena_com_set_admin_running_state(struct ena_com_dev *ena_dev, bool state);

/* ena_com_get_admin_running_state - Get the admin queue state
 * @ena_dev: ENA communication layer struct
 *
 * Retrieve the state of the admin queue (enable/disable)
 *
 * @return - current polling mode (enable/disable)
 */
bool ena_com_get_admin_running_state(struct ena_com_dev *ena_dev);

/* ena_com_set_admin_polling_mode - Set the admin completion queue polling mode
 * @ena_dev: ENA communication layer struct
 * @polling: ENAble/Disable polling mode
 *
 * Set the admin completion mode.
 */
void ena_com_set_admin_polling_mode(struct ena_com_dev *ena_dev, bool polling);

/* ena_com_get_admin_polling_mode - Get the admin completion queue polling mode
 * @ena_dev: ENA communication layer struct
 *
 * Get the admin completion mode.
 * If polling mode is on, ena_com_execute_admin_command will perform a
 * polling on the admin completion queue for the commands completion,
 * otherwise it will wait on wait event.
 *
 * @return state
 */
bool ena_com_get_admin_polling_mode(struct ena_com_dev *ena_dev);

/* ena_com_set_admin_auto_polling_mode - Enable autoswitch to polling mode
 * @ena_dev: ENA communication layer struct
 * @polling: Enable/Disable polling mode
 *
 * Set the autopolling mode.
 * If autopolling is on:
 * In case of missing interrupt when data is available switch to polling.
 */
void ena_com_set_admin_auto_polling_mode(struct ena_com_dev *ena_dev,
					 bool polling);

/* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler
 * @ena_dev: ENA communication layer struct
 *
 * This method goes over the admin completion queue and wakes up all the pending
 * threads that wait on the commands wait event.
 *
 * @note: Should be called after MSI-X interrupt.
 */
void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev);

/* ena_com_aenq_intr_handler - AENQ interrupt handler
 * @ena_dev: ENA communication layer struct
 *
 * This method goes over the async event notification queue and calls the proper
 * aenq handler.
 */
void ena_com_aenq_intr_handler(struct ena_com_dev *ena_dev, void *data);

/* ena_com_abort_admin_commands - Abort all the outstanding admin commands.
 * @ena_dev: ENA communication layer struct
 *
 * This method aborts all the outstanding admin commands.
 * The caller should then call ena_com_wait_for_abort_completion to make sure
 * all the commands were completed.
 */
void ena_com_abort_admin_commands(struct ena_com_dev *ena_dev);

/* ena_com_wait_for_abort_completion - Wait for admin commands abort.
 * @ena_dev: ENA communication layer struct
 *
 * This method waits until all the outstanding admin commands are completed.
 */
void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev);

/* ena_com_validate_version - Validate the device parameters
 * @ena_dev: ENA communication layer struct
 *
 * This method verifies the device parameters are the same as the saved
 * parameters in ena_dev.
 * This method is useful after device reset, to validate the device mac address
 * and the device offloads are the same as before the reset.
 *
 * @return - 0 on success negative value otherwise.
 */
int ena_com_validate_version(struct ena_com_dev *ena_dev);

/* ena_com_get_link_params - Retrieve physical link parameters.
 * @ena_dev: ENA communication layer struct
 * @resp: Link parameters
 *
 * Retrieve the physical link parameters,
 * like speed, auto-negotiation and full duplex support.
 *
 * @return - 0 on Success negative value otherwise.
 */
int ena_com_get_link_params(struct ena_com_dev *ena_dev,
			    struct ena_admin_get_feat_resp *resp);

/* ena_com_get_dma_width - Retrieve physical dma address width the device
 * supports.
 * @ena_dev: ENA communication layer struct
 *
 * Retrieve the maximum physical address bits the device can handle.
 *
 * @return: > 0 on Success and negative value otherwise.
 */
int ena_com_get_dma_width(struct ena_com_dev *ena_dev);

/* ena_com_set_aenq_config - Set aenq groups configurations
 * @ena_dev: ENA communication layer struct
 * @groups flag: bit fields flags of enum ena_admin_aenq_group.
 *
 * Configure which aenq event group the driver would like to receive.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_set_aenq_config(struct ena_com_dev *ena_dev, u32 groups_flag);

/* ena_com_get_dev_attr_feat - Get device features
 * @ena_dev: ENA communication layer struct
 * @get_feat_ctx: returned context that contain the get features.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_dev_attr_feat(struct ena_com_dev *ena_dev,
			      struct ena_com_dev_get_features_ctx *get_feat_ctx);

/* ena_com_get_dev_basic_stats - Get device basic statistics
 * @ena_dev: ENA communication layer struct
 * @stats: stats return value
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_dev_basic_stats(struct ena_com_dev *ena_dev,
				struct ena_admin_basic_stats *stats);

/* ena_com_get_eni_stats - Get extended network interface statistics
 * @ena_dev: ENA communication layer struct
 * @stats: stats return value
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_eni_stats(struct ena_com_dev *ena_dev,
			  struct ena_admin_eni_stats *stats);

/* ena_com_get_ena_srd_info - Get ENA SRD network interface statistics
 * @ena_dev: ENA communication layer struct
 * @info: ena srd stats and flags
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_ena_srd_info(struct ena_com_dev *ena_dev,
			     struct ena_admin_ena_srd_info *info);

/* ena_com_get_customer_metrics - Get customer metrics for network interface
 * @ena_dev: ENA communication layer struct
 * @buffer: buffer for returned customer metrics
 * @len: size of the buffer
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_customer_metrics(struct ena_com_dev *ena_dev, char *buffer, u32 len);

/* ena_com_set_dev_mtu - Configure the device mtu.
 * @ena_dev: ENA communication layer struct
 * @mtu: mtu value
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_set_dev_mtu(struct ena_com_dev *ena_dev, u32 mtu);

/* ena_com_get_offload_settings - Retrieve the device offloads capabilities
 * @ena_dev: ENA communication layer struct
 * @offlad: offload return value
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_offload_settings(struct ena_com_dev *ena_dev,
				 struct ena_admin_feature_offload_desc *offload);

/* ena_com_rss_init - Init RSS
 * @ena_dev: ENA communication layer struct
 * @log_size: indirection log size
 *
 * Allocate RSS/RFS resources.
 * The caller then can configure rss using ena_com_set_hash_function,
 * ena_com_set_hash_ctrl and ena_com_indirect_table_set.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_rss_init(struct ena_com_dev *ena_dev, u16 log_size);

/* ena_com_rss_destroy - Destroy rss
 * @ena_dev: ENA communication layer struct
 *
 * Free all the RSS/RFS resources.
 */
void ena_com_rss_destroy(struct ena_com_dev *ena_dev);

/* ena_com_get_current_hash_function - Get RSS hash function
 * @ena_dev: ENA communication layer struct
 *
 * Return the current hash function.
 * @return: 0 or one of the ena_admin_hash_functions values.
 */
int ena_com_get_current_hash_function(struct ena_com_dev *ena_dev);

/* ena_com_fill_hash_function - Fill RSS hash function
 * @ena_dev: ENA communication layer struct
 * @func: The hash function (Toeplitz or crc)
 * @key: Hash key (for toeplitz hash)
 * @key_len: key length (max length 10 DW)
 * @init_val: initial value for the hash function
 *
 * Fill the ena_dev resources with the desire hash function, hash key, key_len
 * and key initial value (if needed by the hash function).
 * To flush the key into the device the caller should call
 * ena_com_set_hash_function.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
			       enum ena_admin_hash_functions func,
			       const u8 *key, u16 key_len, u32 init_val);

/* ena_com_set_hash_function - Flush the hash function and it dependencies to
 * the device.
 * @ena_dev: ENA communication layer struct
 *
 * Flush the hash function and it dependencies (key, key length and
 * initial value) if needed.
 *
 * @note: Prior to this method the caller should call ena_com_fill_hash_function
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_set_hash_function(struct ena_com_dev *ena_dev);

/* ena_com_get_hash_function - Retrieve the hash function from the device.
 * @ena_dev: ENA communication layer struct
 * @func: hash function
 *
 * Retrieve the hash function from the device.
 *
 * @note: If the caller called ena_com_fill_hash_function but didn't flush
 * it to the device, the new configuration will be lost.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
			      enum ena_admin_hash_functions *func);

/* ena_com_get_hash_key - Retrieve the hash key
 * @ena_dev: ENA communication layer struct
 * @key: hash key
 *
 * Retrieve the hash key.
 *
 * @note: If the caller called ena_com_fill_hash_key but didn't flush
 * it to the device, the new configuration will be lost.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_hash_key(struct ena_com_dev *ena_dev, u8 *key);
/* ena_com_fill_hash_ctrl - Fill RSS hash control
 * @ena_dev: ENA communication layer struct.
 * @proto: The protocol to configure.
 * @hash_fields: bit mask of ena_admin_flow_hash_fields
 *
 * Fill the ena_dev resources with the desire hash control (the ethernet
 * fields that take part of the hash) for a specific protocol.
 * To flush the hash control to the device, the caller should call
 * ena_com_set_hash_ctrl.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_fill_hash_ctrl(struct ena_com_dev *ena_dev,
			   enum ena_admin_flow_hash_proto proto,
			   u16 hash_fields);

/* ena_com_set_hash_ctrl - Flush the hash control resources to the device.
 * @ena_dev: ENA communication layer struct
 *
 * Flush the hash control (the ethernet fields that take part of the hash)
 *
 * @note: Prior to this method the caller should call ena_com_fill_hash_ctrl.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_set_hash_ctrl(struct ena_com_dev *ena_dev);

/* ena_com_get_hash_ctrl - Retrieve the hash control from the device.
 * @ena_dev: ENA communication layer struct
 * @proto: The protocol to retrieve.
 * @fields: bit mask of ena_admin_flow_hash_fields.
 *
 * Retrieve the hash control from the device.
 *
 * @note: If the caller called ena_com_fill_hash_ctrl but didn't flush
 * it to the device, the new configuration will be lost.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_get_hash_ctrl(struct ena_com_dev *ena_dev,
			  enum ena_admin_flow_hash_proto proto,
			  u16 *fields);

/* ena_com_set_default_hash_ctrl - Set the hash control to a default
 * configuration.
 * @ena_dev: ENA communication layer struct
 *
 * Fill the ena_dev resources with the default hash control configuration.
 * To flush the hash control to the device, the caller should call
 * ena_com_set_hash_ctrl.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_set_default_hash_ctrl(struct ena_com_dev *ena_dev);

/* ena_com_indirect_table_fill_entry - Fill a single entry in the RSS
 * indirection table
 * @ena_dev: ENA communication layer struct.
 * @entry_idx - indirection table entry.
 * @entry_value - redirection value
 *
 * Fill a single entry of the RSS indirection table in the ena_dev resources.
 * To flush the indirection table to the device, the called should call
 * ena_com_indirect_table_set.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_indirect_table_fill_entry(struct ena_com_dev *ena_dev,
				      u16 entry_idx, u16 entry_value);

/* ena_com_indirect_table_set - Flush the indirection table to the device.
 * @ena_dev: ENA communication layer struct
 *
 * Flush the indirection hash control to the device.
 * Prior to this method the caller should call ena_com_indirect_table_fill_entry
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_indirect_table_set(struct ena_com_dev *ena_dev);

/* ena_com_indirect_table_get - Retrieve the indirection table from the device.
 * @ena_dev: ENA communication layer struct
 * @ind_tbl: indirection table
 *
 * Retrieve the RSS indirection table from the device.
 *
 * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flush
 * it to the device, the new configuration will be lost.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_indirect_table_get(struct ena_com_dev *ena_dev, u32 *ind_tbl);

/* ena_com_allocate_host_info - Allocate host info resources.
 * @ena_dev: ENA communication layer struct
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_allocate_host_info(struct ena_com_dev *ena_dev);

/* ena_com_allocate_debug_area - Allocate debug area.
 * @ena_dev: ENA communication layer struct
 * @debug_area_size - debug area size.
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev,
				u32 debug_area_size);

/* ena_com_allocate_customer_metrics_buffer - Allocate customer metrics resources.
 * @ena_dev: ENA communication layer struct
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_allocate_customer_metrics_buffer(struct ena_com_dev *ena_dev);

/* ena_com_delete_debug_area - Free the debug area resources.
 * @ena_dev: ENA communication layer struct
 *
 * Free the allocated debug area.
 */
void ena_com_delete_debug_area(struct ena_com_dev *ena_dev);

/* ena_com_delete_host_info - Free the host info resources.
 * @ena_dev: ENA communication layer struct
 *
 * Free the allocated host info.
 */
void ena_com_delete_host_info(struct ena_com_dev *ena_dev);

/* ena_com_delete_customer_metrics_buffer - Free the customer metrics resources.
 * @ena_dev: ENA communication layer struct
 *
 * Free the allocated customer metrics area.
 */
void ena_com_delete_customer_metrics_buffer(struct ena_com_dev *ena_dev);

/* ena_com_set_host_attributes - Update the device with the host
 * attributes (debug area and host info) base address.
 * @ena_dev: ENA communication layer struct
 *
 * @return: 0 on Success and negative value otherwise.
 */
int ena_com_set_host_attributes(struct ena_com_dev *ena_dev);

/* ena_com_create_io_cq - Create io completion queue.
 * @ena_dev: ENA communication layer struct
 * @io_cq - io completion queue handler

 * Create IO completion queue.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_create_io_cq(struct ena_com_dev *ena_dev,
			 struct ena_com_io_cq *io_cq);

/* ena_com_destroy_io_cq - Destroy io completion queue.
 * @ena_dev: ENA communication layer struct
 * @io_cq - io completion queue handler

 * Destroy IO completion queue.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_destroy_io_cq(struct ena_com_dev *ena_dev,
			  struct ena_com_io_cq *io_cq);

/* ena_com_execute_admin_command - Execute admin command
 * @admin_queue: admin queue.
 * @cmd: the admin command to execute.
 * @cmd_size: the command size.
 * @cmd_completion: command completion return value.
 * @cmd_comp_size: command completion size.

 * Submit an admin command and then wait until the device returns a
 * completion.
 * The completion will be copied into cmd_comp.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_execute_admin_command(struct ena_com_admin_queue *admin_queue,
				  struct ena_admin_aq_entry *cmd,
				  size_t cmd_size,
				  struct ena_admin_acq_entry *cmd_comp,
				  size_t cmd_comp_size);

/* ena_com_init_interrupt_moderation - Init interrupt moderation
 * @ena_dev: ENA communication layer struct
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_init_interrupt_moderation(struct ena_com_dev *ena_dev);

/* ena_com_interrupt_moderation_supported - Return if interrupt moderation
 * capability is supported by the device.
 *
 * @return - supported or not.
 */
bool ena_com_interrupt_moderation_supported(struct ena_com_dev *ena_dev);

/* ena_com_update_nonadaptive_moderation_interval_tx - Update the
 * non-adaptive interval in Tx direction.
 * @ena_dev: ENA communication layer struct
 * @tx_coalesce_usecs: Interval in usec.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_update_nonadaptive_moderation_interval_tx(struct ena_com_dev *ena_dev,
						      u32 tx_coalesce_usecs);

/* ena_com_update_nonadaptive_moderation_interval_rx - Update the
 * non-adaptive interval in Rx direction.
 * @ena_dev: ENA communication layer struct
 * @rx_coalesce_usecs: Interval in usec.
 *
 * @return - 0 on success, negative value on failure.
 */
int ena_com_update_nonadaptive_moderation_interval_rx(struct ena_com_dev *ena_dev,
						      u32 rx_coalesce_usecs);

/* ena_com_get_nonadaptive_moderation_interval_tx - Retrieve the
 * non-adaptive interval in Tx direction.
 * @ena_dev: ENA communication layer struct
 *
 * @return - interval in usec
 */
unsigned int ena_com_get_nonadaptive_moderation_interval_tx(struct ena_com_dev *ena_dev);

/* ena_com_get_nonadaptive_moderation_interval_rx - Retrieve the
 * non-adaptive interval in Rx direction.
 * @ena_dev: ENA communication layer struct
 *
 * @return - interval in usec
 */
unsigned int ena_com_get_nonadaptive_moderation_interval_rx(struct ena_com_dev *ena_dev);

/* ena_com_config_dev_mode - Configure the placement policy of the device.
 * @ena_dev: ENA communication layer struct
 * @llq_features: LLQ feature descriptor, retrieve via
 *		   ena_com_get_dev_attr_feat.
 * @ena_llq_config: The default driver LLQ parameters configurations
 */
int ena_com_config_dev_mode(struct ena_com_dev *ena_dev,
			    struct ena_admin_feature_llq_desc *llq_features,
			    struct ena_llq_configurations *llq_default_config);

/* ena_com_io_sq_to_ena_dev - Extract ena_com_dev using contained field io_sq.
 * @io_sq: IO submit queue struct
 *
 * @return - ena_com_dev struct extracted from io_sq
 */
static inline struct ena_com_dev *ena_com_io_sq_to_ena_dev(struct ena_com_io_sq *io_sq)
{
	return container_of(io_sq, struct ena_com_dev, io_sq_queues[io_sq->qid]);
}

/* ena_com_io_cq_to_ena_dev - Extract ena_com_dev using contained field io_cq.
 * @io_sq: IO submit queue struct
 *
 * @return - ena_com_dev struct extracted from io_sq
 */
static inline struct ena_com_dev *ena_com_io_cq_to_ena_dev(struct ena_com_io_cq *io_cq)
{
	return container_of(io_cq, struct ena_com_dev, io_cq_queues[io_cq->qid]);
}

static inline bool ena_com_get_adaptive_moderation_enabled(struct ena_com_dev *ena_dev)
{
	return ena_dev->adaptive_coalescing;
}

static inline void ena_com_enable_adaptive_moderation(struct ena_com_dev *ena_dev)
{
	ena_dev->adaptive_coalescing = true;
}

static inline void ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_dev)
{
	ena_dev->adaptive_coalescing = false;
}

/* ena_com_get_cap - query whether device supports a capability.
 * @ena_dev: ENA communication layer struct
 * @cap_id: enum value representing the capability
 *
 * @return - true if capability is supported or false otherwise
 */
static inline bool ena_com_get_cap(struct ena_com_dev *ena_dev,
				   enum ena_admin_aq_caps_id cap_id)
{
	return !!(ena_dev->capabilities & BIT(cap_id));
}

/* ena_com_get_customer_metric_support - query whether device supports a given customer metric.
 * @ena_dev: ENA communication layer struct
 * @metric_id: enum value representing the customer metric
 *
 * @return - true if customer metric is supported or false otherwise
 */
static inline bool ena_com_get_customer_metric_support(struct ena_com_dev *ena_dev,
						       enum ena_admin_customer_metrics_id metric_id)
{
	return !!(ena_dev->customer_metrics.supported_metrics & BIT64(metric_id));
}

/* ena_com_get_customer_metric_count - return the number of supported customer metrics.
 * @ena_dev: ENA communication layer struct
 *
 * @return - the number of supported customer metrics
 */
static inline int ena_com_get_customer_metric_count(struct ena_com_dev *ena_dev)
{
	return ENA_BITS_PER_U64(ena_dev->customer_metrics.supported_metrics);
}

/* ena_com_update_intr_reg - Prepare interrupt register
 * @intr_reg: interrupt register to update.
 * @rx_delay_interval: Rx interval in usecs
 * @tx_delay_interval: Tx interval in usecs
 * @unmask: unmask enable/disable
 * @no_moderation_update: 0 - Indicates that any of the TX/RX intervals was
 *                        updated, 1 - otherwise
 *
 * Prepare interrupt update register with the supplied parameters.
 */
static inline void ena_com_update_intr_reg(struct ena_eth_io_intr_reg *intr_reg,
					   u32 rx_delay_interval,
					   u32 tx_delay_interval,
					   bool unmask,
					   bool no_moderation_update)
{
	intr_reg->intr_control = 0;
	intr_reg->intr_control |= rx_delay_interval &
		ENA_ETH_IO_INTR_REG_RX_INTR_DELAY_MASK;

	intr_reg->intr_control |=
		(tx_delay_interval << ENA_ETH_IO_INTR_REG_TX_INTR_DELAY_SHIFT)
		& ENA_ETH_IO_INTR_REG_TX_INTR_DELAY_MASK;

	if (unmask)
		intr_reg->intr_control |= ENA_ETH_IO_INTR_REG_INTR_UNMASK_MASK;

	intr_reg->intr_control |=
		(((u32)no_moderation_update) << ENA_ETH_IO_INTR_REG_NO_MODERATION_UPDATE_SHIFT) &
			ENA_ETH_IO_INTR_REG_NO_MODERATION_UPDATE_MASK;
}

static inline u8 *ena_com_get_next_bounce_buffer(struct ena_com_io_bounce_buffer_control *bounce_buf_ctrl)
{
	u16 size, buffers_num;
	u8 *buf;

	size = bounce_buf_ctrl->buffer_size;
	buffers_num = bounce_buf_ctrl->buffers_num;

	buf = bounce_buf_ctrl->base_buffer +
		(bounce_buf_ctrl->next_to_use++ & (buffers_num - 1)) * size;

	prefetchw(bounce_buf_ctrl->base_buffer +
		(bounce_buf_ctrl->next_to_use & (buffers_num - 1)) * size);

	return buf;
}

#ifdef ENA_EXTENDED_STATS
int ena_com_get_dev_extended_stats(struct ena_com_dev *ena_dev, char *buff,
				   u32 len);

int ena_com_extended_stats_set_func_queue(struct ena_com_dev *ena_dev,
					  u32 funct_queue);
#endif
#if defined(__cplusplus)
}
#endif /* __cplusplus */
#endif /* !(ENA_COM) */