| /linux/drivers/usb/misc/ |
| H A D | usb3503.c | 49 struct gpio_desc *bypass; member
113 int rst, bypass, conn; in usb3503_switch_mode() local
119 bypass = 0; in usb3503_switch_mode()
124 bypass = 1; in usb3503_switch_mode()
130 bypass = 1; in usb3503_switch_mode()
143 if (hub->bypass) in usb3503_switch_mode()
144 gpiod_set_value_cansleep(hub->bypass, bypass); in usb3503_switch_mode()
262 if (IS_ERR(hub->bypass)) { in usb3503_probe()
263 err = PTR_ERR(hub->bypass); in usb3503_probe()
266 if (hub->bypass) in usb3503_probe()
[all …]
|
| /linux/drivers/regulator/ |
| H A D | anatop-regulator.c | 30 bool bypass; member
65 sel = anatop_reg->bypass ? LDO_FET_FULL_ON : anatop_reg->sel; in anatop_regmap_enable()
85 if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) { in anatop_regmap_core_set_voltage_sel()
100 if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) in anatop_regmap_core_get_voltage_sel()
113 WARN_ON(!anatop_reg->bypass); in anatop_regmap_get_bypass()
115 WARN_ON(anatop_reg->bypass); in anatop_regmap_get_bypass()
117 *enable = anatop_reg->bypass; in anatop_regmap_get_bypass()
126 if (enable == anatop_reg->bypass) in anatop_regmap_set_bypass()
130 anatop_reg->bypass = enable; in anatop_regmap_set_bypass()
270 sreg->bypass = true; in anatop_regulator_probe()
[all …]
|
| /linux/Documentation/devicetree/bindings/usb/ |
| H A D | smsc,usb3503.yaml | 37 bypass-gpios:
40 GPIO for bypass.
57 Specifies initial mode. 1 for Hub mode, 2 for standby mode and 3 for bypass mode.
58 In bypass mode the downstream port 3 is connected to the upstream port with low
91 bypass-gpios: false
95 - bypass-gpios
138 bypass-gpios = <&gpx3 6 1>;
|
| /linux/drivers/clk/sophgo/ |
| H A D | clk-cv18xx-ip.c | 309 if (cv1800_clk_checkbit(&div->div.common, &div->bypass)) in bypass_div_round_rate()
336 if (cv1800_clk_checkbit(&div->div.common, &div->bypass)) in bypass_div_recalc_rate()
347 if (cv1800_clk_checkbit(&div->div.common, &div->bypass)) in bypass_div_set_rate()
357 if (cv1800_clk_checkbit(&div->div.common, &div->bypass)) in bypass_div_get_parent()
547 if (cv1800_clk_checkbit(&mux->mux.common, &mux->bypass)) in bypass_mux_recalc_rate()
647 if (cv1800_clk_checkbit(&mmux->common, &mmux->bypass)) in mmux_round_rate()
679 if (cv1800_clk_checkbit(&mmux->common, &mmux->bypass)) in mmux_recalc_rate()
702 if (cv1800_clk_checkbit(&mmux->common, &mmux->bypass)) in mmux_set_rate()
723 if (cv1800_clk_checkbit(&mmux->common, &mmux->bypass)) in mmux_get_parent()
746 cv1800_clk_setbit(&mmux->common, &mmux->bypass); in mmux_set_parent()
[all …]
|
| H A D | clk-cv18xx-ip.h | 32 struct cv1800_clk_regbit bypass; member
44 struct cv1800_clk_regbit bypass; member
52 struct cv1800_clk_regbit bypass; member
123 .bypass = CV1800_CLK_BIT(_bypass_reg, _bypass_shift), \
143 .bypass = CV1800_CLK_BIT(_bypass_reg, _bypass_shift), \
186 .bypass = CV1800_CLK_BIT(_bypass_reg, _bypass_shift), \
218 .bypass = CV1800_CLK_BIT(_bypass_reg, \
|
| /linux/include/trace/events/ |
| H A D | bcache.h | 124 TP_PROTO(struct bio *bio, bool hit, bool bypass),
125 TP_ARGS(bio, hit, bypass),
133 __field(bool, bypass )
142 __entry->bypass = bypass;
148 __entry->nr_sector, __entry->cache_hit, __entry->bypass)
153 bool writeback, bool bypass),
154 TP_ARGS(c, inode, bio, writeback, bypass),
163 __field(bool, bypass )
173 __entry->bypass = bypass;
179 __entry->nr_sector, __entry->writeback, __entry->bypass)
|
| /linux/arch/arm/mach-omap2/ |
| H A D | sram.h | 12 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
25 int bypass);
38 int bypass);
|
| H A D | clkt2xxx_dpllcore.c | 114 u32 bypass = 0; in omap2_reprogram_dpllcore() local
162 bypass = 1; in omap2_reprogram_dpllcore()
169 bypass); in omap2_reprogram_dpllcore()
|
| H A D | clkt2xxx_virt_prcm_set.c | 100 u32 cur_rate, done_rate, bypass = 0; in omap2_select_table_rate() local
135 bypass = 1; in omap2_select_table_rate()
153 bypass); in omap2_select_table_rate()
|
| H A D | sram.c | 242 static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
244 u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) in omap2_set_prcm() argument
247 return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); in omap2_set_prcm()
|
| /linux/drivers/clk/imx/ |
| H A D | clk-sscg-pll.c | 75 int bypass; member
146 temp_setup->bypass = PLL_BYPASS1; in clk_sscg_divq_lookup()
220 temp_setup->bypass = PLL_BYPASS_NONE; in clk_sscg_divf1_lookup()
280 setup->bypass = PLL_BYPASS2; in clk_sscg_pll_find_setup()
368 val |= FIELD_PREP(SSCG_PLL_BYPASS_MASK, setup->bypass); in clk_sscg_pll_set_rate()
405 val |= FIELD_PREP(SSCG_PLL_BYPASS_MASK, pll->setup.bypass); in clk_sscg_pll_set_parent()
416 int bypass) in __clk_sscg_pll_determine_rate() argument
427 switch (bypass) { in __clk_sscg_pll_determine_rate()
443 rate, bypass); in __clk_sscg_pll_determine_rate()
|
| /linux/drivers/md/bcache/ |
| H A D | stats.c | 184 bool hit, bool bypass) in mark_cache_stats() argument
186 if (!bypass) in mark_cache_stats()
199 bool hit, bool bypass) in bch_mark_cache_accounting() argument
203 mark_cache_stats(&dc->accounting.collector, hit, bypass); in bch_mark_cache_accounting()
204 mark_cache_stats(&c->accounting.collector, hit, bypass); in bch_mark_cache_accounting()
|
| /linux/Documentation/ABI/testing/ |
| H A D | sysfs-bus-i2c-devices-bq32k | 5 Description: Attribute for enable/disable the trickle charge bypass
7 enable/disable the Trickle charge FET bypass.
|
| H A D | sysfs-bus-iio-filter-admv8818 | 10 - bypass -> bypass low pass filter, high pass filter and disable/unregister
|
| /linux/drivers/clk/at91/ |
| H A D | sckc.c | 122 bool bypass, in at91_clk_register_slow_osc() argument
148 if (bypass) in at91_clk_register_slow_osc()
378 bool bypass; in at91sam9x5_sckc_register() local
398 bypass = of_property_read_bool(child, "atmel,osc-bypass"); in at91sam9x5_sckc_register()
402 bypass = of_property_read_bool(np, "atmel,osc-bypass"); in at91sam9x5_sckc_register()
411 &parent_data, 1200000, bypass, bits); in at91sam9x5_sckc_register()
479 bool bypass; in of_sam9x60_sckc_setup() local
496 bypass = of_property_read_bool(np, "atmel,osc-bypass"); in of_sam9x60_sckc_setup()
498 &parent_data, 5000000, bypass, in of_sam9x60_sckc_setup()
|
| /linux/drivers/media/platform/nxp/imx8-isi/ |
| H A D | imx8-isi-hw.c | 122 bool *bypass) in mxc_isi_channel_set_scaling() argument
165 *bypass = in_size->height == out_size->height && in mxc_isi_channel_set_scaling()
211 bool *bypass) in mxc_isi_channel_set_csc() argument
254 *bypass = !coeffs; in mxc_isi_channel_set_csc()
304 bool bypass) in mxc_isi_channel_set_control() argument
319 if (bypass) in mxc_isi_channel_set_control()
538 mxc_isi_pipe_irq_t irq_handler, bool bypass) in mxc_isi_channel_acquire() argument
556 | (!bypass ? MXC_ISI_CHANNEL_RES_LINE_BUF : 0); in mxc_isi_channel_acquire()
590 int mxc_isi_channel_chain(struct mxc_isi_pipe *pipe, bool bypass) in mxc_isi_channel_chain() argument
|
| /linux/Documentation/devicetree/bindings/power/supply/ |
| H A D | bq25980.yaml | 54 ti,bypass-ovp-limit-microvolt:
61 ti,bypass-ocp-limit-microamp:
67 ti,bypass-enable:
69 description: Enables bypass mode at boot time
|
| /linux/drivers/clk/socfpga/ |
| H A D | clk-pll.c | 44 unsigned long bypass; in clk_pll_recalc_rate() local
47 bypass = readl(clk_mgr_base_addr + CLKMGR_BYPASS); in clk_pll_recalc_rate()
48 if (bypass & MAINPLL_BYPASS) in clk_pll_recalc_rate()
|
| /linux/Documentation/devicetree/bindings/regulator/ |
| H A D | richtek,rt4803.yaml | 15 supports boost and auto bypass mode that depends on the difference between the
17 transform to boost mode. Otherwise, turn on bypass switch to enter bypass mode.
|
| /linux/Documentation/devicetree/bindings/clock/ti/ |
| H A D | dpll.txt | 5 (reference clock and bypass clock), with digital phase locked
36 and second entry bypass clock
55 - ti,low-power-bypass : DPLL output matches rate of parent bypass clock
79 ti,low-power-bypass;
|
| /linux/arch/mips/include/asm/octeon/ |
| H A D | cvmx-asxx-defs.h | 200 uint64_t bypass:1; member
202 uint64_t bypass:1;
469 uint64_t bypass:1; member
475 uint64_t bypass:1;
493 uint64_t bypass:1; member
503 uint64_t bypass:1;
|
| /linux/drivers/power/supply/ |
| H A D | bq25980_charger.c | 31 bool bypass; member
306 if (bq->state.bypass) in bq25980_set_input_curr_lim()
328 if (bq->state.bypass) { in bq25980_get_input_volt_lim()
350 if (bq->state.bypass) { in bq25980_set_input_volt_lim()
454 bq->state.bypass = en_bypass; in bq25980_set_bypass()
456 return bq->state.bypass; in bq25980_set_bypass()
604 state->bypass = chg_ctrl_2 & BQ25980_EN_BYPASS; in bq25980_get_state()
766 else if (state.bypass) in bq25980_get_charger_property()
768 else if (!state.bypass) in bq25980_get_charger_property()
828 old_state.bypass != new_state->bypass); in bq25980_state_changed()
[all …]
|
| /linux/Documentation/devicetree/bindings/mfd/ |
| H A D | actions,atc260x.yaml | 68 regulator-allow-bypass: true
87 regulator-allow-bypass: true
103 regulator-allow-bypass: false
115 regulator-allow-bypass: false
|
| /linux/drivers/pwm/ |
| H A D | pwm-sun4i.c | 172 bool *bypass) in sun4i_pwm_calculate() argument
179 *bypass = sun4ichip->data->has_direct_mod_clk_output && in sun4i_pwm_calculate()
186 if (*bypass) in sun4i_pwm_calculate()
240 bool bypass; in sun4i_pwm_apply() local
253 &bypass); in sun4i_pwm_apply()
265 if (bypass) { in sun4i_pwm_apply()
|
| /linux/net/sched/ |
| H A D | sch_fifo.c | 100 bool bypass; in __fifo_init() local
120 bypass = sch->limit >= psched_mtu(qdisc_dev(sch)); in __fifo_init()
122 bypass = sch->limit >= 1; in __fifo_init()
124 if (bypass) in __fifo_init()
|