xref: /linux/arch/arc/kernel/setup.c (revision ebfc2fd8)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4  */
5 
6 #include <linux/seq_file.h>
7 #include <linux/fs.h>
8 #include <linux/delay.h>
9 #include <linux/root_dev.h>
10 #include <linux/clk.h>
11 #include <linux/clocksource.h>
12 #include <linux/console.h>
13 #include <linux/module.h>
14 #include <linux/sizes.h>
15 #include <linux/cpu.h>
16 #include <linux/of_clk.h>
17 #include <linux/of_fdt.h>
18 #include <linux/of.h>
19 #include <linux/cache.h>
20 #include <uapi/linux/mount.h>
21 #include <asm/sections.h>
22 #include <asm/arcregs.h>
23 #include <asm/asserts.h>
24 #include <asm/tlb.h>
25 #include <asm/setup.h>
26 #include <asm/page.h>
27 #include <asm/irq.h>
28 #include <asm/unwind.h>
29 #include <asm/mach_desc.h>
30 #include <asm/smp.h>
31 #include <asm/dsp-impl.h>
32 #include <soc/arc/mcip.h>
33 
34 #define FIX_PTR(x)  __asm__ __volatile__(";" : "+r"(x))
35 
36 unsigned int intr_to_DE_cnt;
37 
38 /* Part of U-boot ABI: see head.S */
39 int __initdata uboot_tag;
40 int __initdata uboot_magic;
41 char __initdata *uboot_arg;
42 
43 const struct machine_desc *machine_desc;
44 
45 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
46 
47 struct cpuinfo_arc {
48 	int arcver;
49 	unsigned int t0:1, t1:1;
50 	struct {
51 		unsigned long base;
52 		unsigned int sz;
53 	} iccm, dccm;
54 };
55 
56 #ifdef CONFIG_ISA_ARCV2
57 
58 static const struct id_to_str arc_hs_rel[] = {
59 	/* ID.ARCVER,	Release */
60 	{ 0x51, 	"R2.0" },
61 	{ 0x52, 	"R2.1" },
62 	{ 0x53,		"R3.0" },
63 };
64 
65 static const struct id_to_str arc_hs_ver54_rel[] = {
66 	/* UARCH.MAJOR,	Release */
67 	{  0,		"R3.10a"},
68 	{  1,		"R3.50a"},
69 	{  2,		"R3.60a"},
70 	{  3,		"R4.00a"},
71 	{  0xFF,	NULL   }
72 };
73 #endif
74 
75 static int
arcompact_mumbojumbo(int c,struct cpuinfo_arc * info,char * buf,int len)76 arcompact_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
77 {
78 	int n = 0;
79 #ifdef CONFIG_ISA_ARCOMPACT
80 	char *cpu_nm, *isa_nm = "ARCompact";
81 	struct bcr_fp_arcompact fpu_sp, fpu_dp;
82 	int atomic = 0, be, present;
83 	int bpu_full, bpu_cache, bpu_pred;
84 	struct bcr_bpu_arcompact bpu;
85 	struct bcr_iccm_arcompact iccm;
86 	struct bcr_dccm_arcompact dccm;
87 	struct bcr_generic isa;
88 
89 	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
90 
91 	if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
92 		atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
93 	else {
94 		/* ARC700_BUILD only has 2 bits of isa info */
95 		atomic = isa.info & 1;
96 	}
97 
98 	be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
99 
100 	if (info->arcver < 0x34)
101 		cpu_nm = "ARC750";
102 	else
103 		cpu_nm = "ARC770";
104 
105 	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s (%s ISA) %s%s%s\n",
106 		       c, cpu_nm, isa_nm,
107 		       IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
108 		       IS_AVAIL1(be, "[Big-Endian]"));
109 
110 	READ_BCR(ARC_REG_FP_BCR, fpu_sp);
111 	READ_BCR(ARC_REG_DPFP_BCR, fpu_dp);
112 
113 	if (fpu_sp.ver | fpu_dp.ver)
114 		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
115 			       IS_AVAIL1(fpu_sp.ver, "SP "),
116 			       IS_AVAIL1(fpu_dp.ver, "DP "));
117 
118 	READ_BCR(ARC_REG_BPU_BCR, bpu);
119 	bpu_full = bpu.fam ? 1 : 0;
120 	bpu_cache = 256 << (bpu.ent - 1);
121 	bpu_pred = 256 << (bpu.ent - 1);
122 
123 	n += scnprintf(buf + n, len - n,
124 			"BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n",
125 			IS_AVAIL1(bpu_full, "full"),
126 			IS_AVAIL1(!bpu_full, "partial"),
127 			bpu_cache, bpu_pred);
128 
129 	READ_BCR(ARC_REG_ICCM_BUILD, iccm);
130 	if (iccm.ver) {
131 		info->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
132 		info->iccm.base = iccm.base << 16;
133 	}
134 
135 	READ_BCR(ARC_REG_DCCM_BUILD, dccm);
136 	if (dccm.ver) {
137 		unsigned long base;
138 		info->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
139 
140 		base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
141 		info->dccm.base = base & ~0xF;
142 	}
143 
144 	/* ARCompact ISA specific sanity checks */
145 	present = fpu_dp.ver;	/* SP has no arch visible regs */
146 	CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
147 #endif
148 	return n;
149 
150 }
151 
arcv2_mumbojumbo(int c,struct cpuinfo_arc * info,char * buf,int len)152 static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
153 {
154 	int n = 0;
155 #ifdef CONFIG_ISA_ARCV2
156 	const char *release = "", *cpu_nm = "HS38", *isa_nm = "ARCv2";
157 	int dual_issue = 0, dual_enb = 0, mpy_opt, present;
158 	int bpu_full, bpu_cache, bpu_pred, bpu_ret_stk;
159 	char mpy_nm[16], lpb_nm[32];
160 	struct bcr_isa_arcv2 isa;
161 	struct bcr_mpy mpy;
162 	struct bcr_fp_arcv2 fpu;
163 	struct bcr_bpu_arcv2 bpu;
164 	struct bcr_lpb lpb;
165 	struct bcr_iccm_arcv2 iccm;
166 	struct bcr_dccm_arcv2 dccm;
167 	struct bcr_erp erp;
168 
169 	/*
170 	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
171 	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
172 	 * releases only update it.
173 	 */
174 
175 	if (info->arcver > 0x50 && info->arcver <= 0x53) {
176 		release = arc_hs_rel[info->arcver - 0x51].str;
177 	} else {
178 		const struct id_to_str *tbl;
179 		struct bcr_uarch_build uarch;
180 
181 		READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
182 
183 		for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
184 			if (uarch.maj == tbl->id) {
185 				release = tbl->str;
186 				break;
187 			}
188 		}
189 		if (uarch.prod == 4) {
190 			unsigned int exec_ctrl;
191 
192 			cpu_nm = "HS48";
193 			dual_issue = 1;
194 			/* if dual issue hardware, is it enabled ? */
195 			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
196 			dual_enb = !(exec_ctrl & 1);
197 		}
198 	}
199 
200 	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
201 
202 	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
203 		       c, cpu_nm, release, isa_nm,
204 		       IS_AVAIL1(isa.be, "[Big-Endian]"),
205 		       IS_AVAIL3(dual_issue, dual_enb, " Dual-Issue "));
206 
207 	READ_BCR(ARC_REG_MPY_BCR, mpy);
208 	mpy_opt = 2;	/* stock MPY/MPYH */
209 	if (mpy.dsp)	/* OPT 7-9 */
210 		mpy_opt = mpy.dsp + 6;
211 
212 	scnprintf(mpy_nm, 16, "mpy[opt %d] ", mpy_opt);
213 
214 	READ_BCR(ARC_REG_FP_V2_BCR, fpu);
215 
216 	n += scnprintf(buf + n, len - n, "ISA Extn\t: %s%s%s%s%s%s%s%s%s%s%s\n",
217 		       IS_AVAIL2(isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
218 		       IS_AVAIL2(isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
219 		       IS_AVAIL2(isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
220 		       IS_AVAIL1(mpy.ver, mpy_nm),
221 		       IS_AVAIL1(isa.div_rem, "div_rem "),
222 		       IS_AVAIL1((fpu.sp | fpu.dp), "  FPU:"),
223 		       IS_AVAIL1(fpu.sp, " sp"),
224 		       IS_AVAIL1(fpu.dp, " dp"));
225 
226 	READ_BCR(ARC_REG_BPU_BCR, bpu);
227 	bpu_full = bpu.ft;
228 	bpu_cache = 256 << bpu.bce;
229 	bpu_pred = 2048 << bpu.pte;
230 	bpu_ret_stk = 4 << bpu.rse;
231 
232 	READ_BCR(ARC_REG_LPB_BUILD, lpb);
233 	if (lpb.ver) {
234 		unsigned int ctl;
235 		ctl = read_aux_reg(ARC_REG_LPB_CTRL);
236 
237 		scnprintf(lpb_nm, sizeof(lpb_nm), " Loop Buffer:%d %s",
238 			  lpb.entries, IS_DISABLED_RUN(!ctl));
239 	}
240 
241 	n += scnprintf(buf + n, len - n,
242 			"BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d%s\n",
243 			IS_AVAIL1(bpu_full, "full"),
244 			IS_AVAIL1(!bpu_full, "partial"),
245 			bpu_cache, bpu_pred, bpu_ret_stk,
246 			lpb_nm);
247 
248 	READ_BCR(ARC_REG_ICCM_BUILD, iccm);
249 	if (iccm.ver) {
250 		unsigned long base;
251 		info->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
252 		if (iccm.sz00 == 0xF && iccm.sz01 > 0)
253 			info->iccm.sz <<= iccm.sz01;
254 		base = read_aux_reg(ARC_REG_AUX_ICCM);
255 		info->iccm.base = base & 0xF0000000;
256 	}
257 
258 	READ_BCR(ARC_REG_DCCM_BUILD, dccm);
259 	if (dccm.ver) {
260 		unsigned long base;
261 		info->dccm.sz = 256 << dccm.sz0;
262 		if (dccm.sz0 == 0xF && dccm.sz1 > 0)
263 			info->dccm.sz <<= dccm.sz1;
264 		base = read_aux_reg(ARC_REG_AUX_DCCM);
265 		info->dccm.base = base & 0xF0000000;
266 	}
267 
268 	/* Error Protection: ECC/Parity */
269 	READ_BCR(ARC_REG_ERP_BUILD, erp);
270 	if (erp.ver) {
271 		struct ctl_erp ctl;
272 		READ_BCR(ARC_REG_ERP_CTRL, ctl);
273 		/* inverted bits: 0 means enabled */
274 		n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
275 				IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "),
276 				IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "),
277 				IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
278 	}
279 
280 	/* ARCv2 ISA specific sanity checks */
281 	present = fpu.sp | fpu.dp | mpy.dsp;	/* DSP and/or FPU */
282 	CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
283 
284 	dsp_config_check();
285 #endif
286 	return n;
287 }
288 
arc_cpu_mumbojumbo(int c,struct cpuinfo_arc * info,char * buf,int len)289 static char *arc_cpu_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
290 {
291 	struct bcr_identity ident;
292 	struct bcr_timer timer;
293 	struct bcr_generic bcr;
294 	struct mcip_bcr mp;
295 	struct bcr_actionpoint ap;
296 	unsigned long vec_base;
297 	int ap_num, ap_full, smart, rtt, n;
298 
299 	memset(info, 0, sizeof(struct cpuinfo_arc));
300 
301 	READ_BCR(AUX_IDENTITY, ident);
302 	info->arcver = ident.family;
303 
304 	n = scnprintf(buf, len,
305 		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
306 		       ident.family, ident.cpu_id, ident.chip_id);
307 
308 	if (is_isa_arcompact()) {
309 		n += arcompact_mumbojumbo(c, info, buf + n, len - n);
310 	} else if (is_isa_arcv2()){
311 		n += arcv2_mumbojumbo(c, info, buf + n, len - n);
312 	}
313 
314 	n += arc_mmu_mumbojumbo(c, buf + n, len - n);
315 	n += arc_cache_mumbojumbo(c, buf + n, len - n);
316 
317 	READ_BCR(ARC_REG_TIMERS_BCR, timer);
318 	info->t0 = timer.t0;
319 	info->t1 = timer.t1;
320 
321 	READ_BCR(ARC_REG_MCIP_BCR, mp);
322 	vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
323 
324 	n += scnprintf(buf + n, len - n,
325 		       "Timers\t\t: %s%s%s%s%s%s\nVector Table\t: %#lx\n",
326 		       IS_AVAIL1(timer.t0, "Timer0 "),
327 		       IS_AVAIL1(timer.t1, "Timer1 "),
328 		       IS_AVAIL2(timer.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
329 		       IS_AVAIL2(mp.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
330 		       vec_base);
331 
332 	READ_BCR(ARC_REG_AP_BCR, ap);
333 	if (ap.ver) {
334 		ap_num = 2 << ap.num;
335 		ap_full = !ap.min;
336 	}
337 
338 	READ_BCR(ARC_REG_SMART_BCR, bcr);
339 	smart = bcr.ver ? 1 : 0;
340 
341 	READ_BCR(ARC_REG_RTT_BCR, bcr);
342 	rtt = bcr.ver ? 1 : 0;
343 
344 	if (ap.ver | smart | rtt) {
345 		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s",
346 			       IS_AVAIL1(smart, "smaRT "),
347 			       IS_AVAIL1(rtt, "RTT "));
348 		if (ap.ver) {
349 			n += scnprintf(buf + n, len - n, "ActionPoint %d/%s",
350 				       ap_num,
351 				       ap_full ? "full":"min");
352 		}
353 		n += scnprintf(buf + n, len - n, "\n");
354 	}
355 
356 	if (info->dccm.sz || info->iccm.sz)
357 		n += scnprintf(buf + n, len - n,
358 			       "Extn [CCM]\t: DCCM @ %lx, %d KB / ICCM: @ %lx, %d KB\n",
359 			       info->dccm.base, TO_KB(info->dccm.sz),
360 			       info->iccm.base, TO_KB(info->iccm.sz));
361 
362 	return buf;
363 }
364 
chk_opt_strict(char * opt_name,bool hw_exists,bool opt_ena)365 void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena)
366 {
367 	if (hw_exists && !opt_ena)
368 		pr_warn(" ! Enable %s for working apps\n", opt_name);
369 	else if (!hw_exists && opt_ena)
370 		panic("Disable %s, hardware NOT present\n", opt_name);
371 }
372 
chk_opt_weak(char * opt_name,bool hw_exists,bool opt_ena)373 void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena)
374 {
375 	if (!hw_exists && opt_ena)
376 		panic("Disable %s, hardware NOT present\n", opt_name);
377 }
378 
379 /*
380  * ISA agnostic sanity checks
381  */
arc_chk_core_config(struct cpuinfo_arc * info)382 static void arc_chk_core_config(struct cpuinfo_arc *info)
383 {
384 	if (!info->t0)
385 		panic("Timer0 is not present!\n");
386 
387 	if (!info->t1)
388 		panic("Timer1 is not present!\n");
389 
390 #ifdef CONFIG_ARC_HAS_DCCM
391 	/*
392 	 * DCCM can be arbit placed in hardware.
393 	 * Make sure its placement/sz matches what Linux is built with
394 	 */
395 	if ((unsigned int)__arc_dccm_base != info->dccm.base)
396 		panic("Linux built with incorrect DCCM Base address\n");
397 
398 	if (CONFIG_ARC_DCCM_SZ * SZ_1K != info->dccm.sz)
399 		panic("Linux built with incorrect DCCM Size\n");
400 #endif
401 
402 #ifdef CONFIG_ARC_HAS_ICCM
403 	if (CONFIG_ARC_ICCM_SZ * SZ_1K != info->iccm.sz)
404 		panic("Linux built with incorrect ICCM Size\n");
405 #endif
406 }
407 
408 /*
409  * Initialize and setup the processor core
410  * This is called by all the CPUs thus should not do special case stuff
411  *    such as only for boot CPU etc
412  */
413 
setup_processor(void)414 void setup_processor(void)
415 {
416 	struct cpuinfo_arc info;
417 	int c = smp_processor_id();
418 	char str[512];
419 
420 	pr_info("%s", arc_cpu_mumbojumbo(c, &info, str, sizeof(str)));
421 	pr_info("%s", arc_platform_smp_cpuinfo());
422 
423 	arc_chk_core_config(&info);
424 
425 	arc_init_IRQ();
426 	arc_mmu_init();
427 	arc_cache_init();
428 
429 }
430 
uboot_arg_invalid(unsigned long addr)431 static inline bool uboot_arg_invalid(unsigned long addr)
432 {
433 	/*
434 	 * Check that it is a untranslated address (although MMU is not enabled
435 	 * yet, it being a high address ensures this is not by fluke)
436 	 */
437 	if (addr < PAGE_OFFSET)
438 		return true;
439 
440 	/* Check that address doesn't clobber resident kernel image */
441 	return addr >= (unsigned long)_stext && addr <= (unsigned long)_end;
442 }
443 
444 #define IGNORE_ARGS		"Ignore U-boot args: "
445 
446 /* uboot_tag values for U-boot - kernel ABI revision 0; see head.S */
447 #define UBOOT_TAG_NONE		0
448 #define UBOOT_TAG_CMDLINE	1
449 #define UBOOT_TAG_DTB		2
450 /* We always pass 0 as magic from U-boot */
451 #define UBOOT_MAGIC_VALUE	0
452 
handle_uboot_args(void)453 void __init handle_uboot_args(void)
454 {
455 	bool use_embedded_dtb = true;
456 	bool append_cmdline = false;
457 
458 	/* check that we know this tag */
459 	if (uboot_tag != UBOOT_TAG_NONE &&
460 	    uboot_tag != UBOOT_TAG_CMDLINE &&
461 	    uboot_tag != UBOOT_TAG_DTB) {
462 		pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag);
463 		goto ignore_uboot_args;
464 	}
465 
466 	if (uboot_magic != UBOOT_MAGIC_VALUE) {
467 		pr_warn(IGNORE_ARGS "non zero uboot magic\n");
468 		goto ignore_uboot_args;
469 	}
470 
471 	if (uboot_tag != UBOOT_TAG_NONE &&
472             uboot_arg_invalid((unsigned long)uboot_arg)) {
473 		pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg);
474 		goto ignore_uboot_args;
475 	}
476 
477 	/* see if U-boot passed an external Device Tree blob */
478 	if (uboot_tag == UBOOT_TAG_DTB) {
479 		machine_desc = setup_machine_fdt((void *)uboot_arg);
480 
481 		/* external Device Tree blob is invalid - use embedded one */
482 		use_embedded_dtb = !machine_desc;
483 	}
484 
485 	if (uboot_tag == UBOOT_TAG_CMDLINE)
486 		append_cmdline = true;
487 
488 ignore_uboot_args:
489 
490 	if (use_embedded_dtb) {
491 		machine_desc = setup_machine_fdt(__dtb_start);
492 		if (!machine_desc)
493 			panic("Embedded DT invalid\n");
494 	}
495 
496 	/*
497 	 * NOTE: @boot_command_line is populated by setup_machine_fdt() so this
498 	 * append processing can only happen after.
499 	 */
500 	if (append_cmdline) {
501 		/* Ensure a whitespace between the 2 cmdlines */
502 		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
503 		strlcat(boot_command_line, uboot_arg, COMMAND_LINE_SIZE);
504 	}
505 }
506 
setup_arch(char ** cmdline_p)507 void __init setup_arch(char **cmdline_p)
508 {
509 	handle_uboot_args();
510 
511 	/* Save unparsed command line copy for /proc/cmdline */
512 	*cmdline_p = boot_command_line;
513 
514 	/* To force early parsing of things like mem=xxx */
515 	parse_early_param();
516 
517 	/* Platform/board specific: e.g. early console registration */
518 	if (machine_desc->init_early)
519 		machine_desc->init_early();
520 
521 	smp_init_cpus();
522 
523 	setup_processor();
524 	setup_arch_memory();
525 
526 	/* copy flat DT out of .init and then unflatten it */
527 	unflatten_and_copy_device_tree();
528 
529 	/* Can be issue if someone passes cmd line arg "ro"
530 	 * But that is unlikely so keeping it as it is
531 	 */
532 	root_mountflags &= ~MS_RDONLY;
533 
534 	arc_unwind_init();
535 }
536 
537 /*
538  * Called from start_kernel() - boot CPU only
539  */
time_init(void)540 void __init time_init(void)
541 {
542 	of_clk_init(NULL);
543 	timer_probe();
544 }
545 
customize_machine(void)546 static int __init customize_machine(void)
547 {
548 	if (machine_desc->init_machine)
549 		machine_desc->init_machine();
550 
551 	return 0;
552 }
553 arch_initcall(customize_machine);
554 
init_late_machine(void)555 static int __init init_late_machine(void)
556 {
557 	if (machine_desc->init_late)
558 		machine_desc->init_late();
559 
560 	return 0;
561 }
562 late_initcall(init_late_machine);
563 /*
564  *  Get CPU information for use by the procfs.
565  */
566 
567 #define cpu_to_ptr(c)	((void *)(0xFFFF0000 | (unsigned int)(c)))
568 #define ptr_to_cpu(p)	(~0xFFFF0000UL & (unsigned int)(p))
569 
show_cpuinfo(struct seq_file * m,void * v)570 static int show_cpuinfo(struct seq_file *m, void *v)
571 {
572 	char *str;
573 	int cpu_id = ptr_to_cpu(v);
574 	struct device *cpu_dev = get_cpu_device(cpu_id);
575 	struct cpuinfo_arc info;
576 	struct clk *cpu_clk;
577 	unsigned long freq = 0;
578 
579 	if (!cpu_online(cpu_id)) {
580 		seq_printf(m, "processor [%d]\t: Offline\n", cpu_id);
581 		goto done;
582 	}
583 
584 	str = (char *)__get_free_page(GFP_KERNEL);
585 	if (!str)
586 		goto done;
587 
588 	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, &info, str, PAGE_SIZE));
589 
590 	cpu_clk = clk_get(cpu_dev, NULL);
591 	if (IS_ERR(cpu_clk)) {
592 		seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n",
593 			   cpu_id);
594 	} else {
595 		freq = clk_get_rate(cpu_clk);
596 	}
597 	if (freq)
598 		seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n",
599 			   freq / 1000000, (freq / 10000) % 100);
600 
601 	seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n",
602 		   loops_per_jiffy / (500000 / HZ),
603 		   (loops_per_jiffy / (5000 / HZ)) % 100);
604 
605 	seq_printf(m, arc_platform_smp_cpuinfo());
606 
607 	free_page((unsigned long)str);
608 done:
609 	seq_printf(m, "\n");
610 
611 	return 0;
612 }
613 
c_start(struct seq_file * m,loff_t * pos)614 static void *c_start(struct seq_file *m, loff_t *pos)
615 {
616 	/*
617 	 * Callback returns cpu-id to iterator for show routine, NULL to stop.
618 	 * However since NULL is also a valid cpu-id (0), we use a round-about
619 	 * way to pass it w/o having to kmalloc/free a 2 byte string.
620 	 * Encode cpu-id as 0xFFcccc, which is decoded by show routine.
621 	 */
622 	return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL;
623 }
624 
c_next(struct seq_file * m,void * v,loff_t * pos)625 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
626 {
627 	++*pos;
628 	return c_start(m, pos);
629 }
630 
c_stop(struct seq_file * m,void * v)631 static void c_stop(struct seq_file *m, void *v)
632 {
633 }
634 
635 const struct seq_operations cpuinfo_op = {
636 	.start	= c_start,
637 	.next	= c_next,
638 	.stop	= c_stop,
639 	.show	= show_cpuinfo
640 };
641 
642 static DEFINE_PER_CPU(struct cpu, cpu_topology);
643 
topology_init(void)644 static int __init topology_init(void)
645 {
646 	int cpu;
647 
648 	for_each_present_cpu(cpu)
649 	    register_cpu(&per_cpu(cpu_topology, cpu), cpu);
650 
651 	return 0;
652 }
653 
654 subsys_initcall(topology_init);
655