1 /* $NetBSD: tqphyreg.h,v 1.4 2005/12/11 12:22:42 christos Exp $ */ 2 3 /* 4 * Copyright (c) 1999 Soren S. Jorvang. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #ifndef _DEV_MII_TQPHYREG_H_ 30 #define _DEV_MII_TQPHYREG_H_ 31 32 /* 33 * TDK TSC78Q2120 PHY registers 34 * 35 * Documentation available at http://www.tsc.tdk.com/lan/78Q2120.pdf . 36 */ 37 38 /* 39 * http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html has this to say: 40 * 41 * TDK Semiconductor (formerly Silicon Systems) 78Q2120 (10/100) and 78Q2121 42 * (100Mbps only) MII transceivers. The first PHY available which worked at 43 * both 5.0 and 3.3V. Used on the 3Com 3c574 and Ositech products. The OUI 44 * is 00:c0:39, models 20 and 21. Warning: The older revision 3 part has 45 * several bugs. It always responds to MDIO address 0, and has clear-only 46 * semantics for the capability-advertise registers. The current (3/99) 47 * revision 11 part, shipping since 8/98, has reportedly fixed these problems. 48 */ 49 50 #define MII_TQPHY_VENDOR 0x10 /* Vendor specific register */ 51 #define VENDOR_RPTR 0x8000 /* Repeater mode */ 52 #define VENDOR_INTLEVEL 0x4000 /* INTR pin level */ 53 #define VENDOR_RSVD1 0x2000 /* Reserved */ 54 #define VENDOR_TXHIM 0x1000 /* Transmit high impedance */ 55 #define VENDOR_SEQTESTINHIBIT 0x0800 /* Disables 10baseT SQE testing */ 56 #define VENDOR_10BT_LOOPBACK 0x0400 /* 10baseT natural loopback */ 57 #define VENDOR_GPIO1_DAT 0x0200 /* General purpose I/O 1 data */ 58 #define VENDOR_GPIO1_DIR 0x0100 /* General purpose I/O 1 direction */ 59 #define VENDOR_GPIO0_DAT 0x0080 /* General purpose I/O 0 data */ 60 #define VENDOR_GPIO0_DIR 0x0040 /* General purpose I/O 0 direction */ 61 #define VENDOR_APOL 0x0020 /* Auto polarity */ 62 #define VENDOR_RVSPOL 0x0010 /* Reverse polarity */ 63 #define VENDOR_RSVD2 0x0008 /* Reserved (must be zero) */ 64 #define VENDOR_RSVD3 0x0004 /* Reserved (must be zero) */ 65 #define VENDOR_PCSBP 0x0002 /* PCS bypass */ 66 #define VENDOR_RXCC 0x0001 /* Receive clock control */ 67 68 #define MII_TQPHY_INTR 0x11 /* Interrupt control/status register */ 69 #define INTR_JABBER_IE 0x8000 /* Jabber interrupt enable */ 70 #define INTR_RXER_IE 0x4000 /* Receive error enable */ 71 #define INTR_PRX_IE 0x2000 /* Page received enable */ 72 #define INTR_PFD_IE 0x1000 /* Parallel detect fault enable */ 73 #define INTR_LPACK_IE 0x0800 /* Link partner ack. enable */ 74 #define INTR_LSCHG_IE 0x0400 /* Link status change enable */ 75 #define INTR_RFAULT_IE 0x0200 /* Remote fault enable */ 76 #define INTR_ANEGCOMP_IE 0x0100 /* Autonegotiation complete enable */ 77 #define INTR_JABBER_INT 0x0080 /* Jabber interrupt */ 78 #define INTR_RXER_INT 0x0040 /* Receive error interrupt */ 79 #define INTR_PRX_INT 0x0020 /* Page receive interrupt */ 80 #define INTR_PDF_INT 0x0010 /* Parallel detect fault interrupt */ 81 #define INTR_LPACK_INT 0x0008 /* Link partner ack. interrupt */ 82 #define INTR_LSCHG_INT 0x0004 /* Link status change interrupt */ 83 #define INTR_RFAULT_INT 0x0002 /* Remote fault interrupt */ 84 #define INTR_ANEGCOMP_INT 0x0001 /* Autonegotiation complete interrupt */ 85 86 #define MII_TQPHY_DIAG 0x12 /* Diagnostic register */ 87 #define DIAG_ANEGF 0x1000 /* Autonegotiation fail */ 88 #define DIAG_DPLX 0x0800 /* Duplex (half/full) */ 89 #define DIAG_RATE 0x0400 /* Rate (10/100) */ 90 #define DIAG_RXPASS 0x0200 /* Receive pass */ 91 #define DIAG_RXLOCK 0x0100 /* Receive lock */ 92 93 #endif /* _DEV_MII_TQPHYREG_H_ */ 94