1 /* $OpenBSD: hid.h,v 1.1 2013/10/31 08:26:12 mpi Exp $ */ 2 3 /*- 4 * Copyright (c) 2000 Tsubai Masanari. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * $NetBSD: hid.h,v 1.2 2001/08/22 21:05:25 matt Exp $ 29 */ 30 31 #ifndef _POWERPC_HID_H_ 32 #define _POWERPC_HID_H_ 33 34 /* Hardware Implementation Dependent registers for the PowerPC */ 35 36 #define HID0_EMCP 0x80000000 /* Enable machine check pin */ 37 #define HID0_DBP 0x40000000 /* Disable 60x bus parity generation */ 38 #define HID0_EBA 0x20000000 /* Enable 60x bus address parity checking */ 39 #define HID0_EBD 0x10000000 /* Enable 60x bus data parity checking */ 40 #define HID0_BCLK 0x08000000 /* CLK_OUT clock type selection */ 41 #define HID0_EICE 0x04000000 /* Enable ICE output */ 42 #define HID0_TBEN 0x04000000 /* Time base enable (7450) */ 43 #define HID0_ECLK 0x02000000 /* CLK_OUT clock type selection */ 44 #define HID0_PAR 0x01000000 /* Disable precharge of ARTRY */ 45 #define HID0_STEN 0x01000000 /* Software table search enable (7450) */ 46 #define HID0_DEEPNAP 0x01000000 /* Enable deep nap mode (970) */ 47 #define HID0_HBATEN 0x00800000 /* High BAT enable (74[45][578]) */ 48 #define HID0_DOZE 0x00800000 /* Enable doze mode */ 49 #define HID0_NAP 0x00400000 /* Enable nap mode */ 50 #define HID0_SLEEP 0x00200000 /* Enable sleep mode */ 51 #define HID0_DPM 0x00100000 /* Enable Dynamic power management */ 52 #define HID0_RISEG 0x00080000 /* Read I-SEG */ 53 #define HID0_TG 0x00040000 /* Timebase Granularity (OEA64) */ 54 #define HID0_BHTCLR 0x00040000 /* Clear branch history table (7450) */ 55 #define HID0_EIEC 0x00040000 /* Enable internal error checking */ 56 #define HID0_XAEN 0x00020000 /* Enable eXtended Addressing (7450) */ 57 #define HID0_NHR 0x00010000 /* Not hard reset */ 58 #define HID0_ICE 0x00008000 /* Enable i-cache */ 59 #define HID0_DCE 0x00004000 /* Enable d-cache */ 60 #define HID0_ILOCK 0x00002000 /* i-cache lock */ 61 #define HID0_DLOCK 0x00001000 /* d-cache lock */ 62 #define HID0_ICFI 0x00000800 /* i-cache flush invalidate */ 63 #define HID0_DCFI 0x00000400 /* d-cache flush invalidate */ 64 #define HID0_SPD 0x00000200 /* Disable speculative cache access */ 65 #define HID0_XBSEN 0x00000100 /* Extended BAT block-size enable (7457) */ 66 #define HID0_IFEM 0x00000100 /* Enable M-bit for I-fetch */ 67 #define HID0_XBSEN 0x00000100 /* Extended BAT block size enable (7455+) */ 68 #define HID0_SGE 0x00000080 /* Enable store gathering */ 69 #define HID0_DCFA 0x00000040 /* Data cache flush assist */ 70 #define HID0_BTIC 0x00000020 /* Enable BTIC */ 71 #define HID0_LRSTK 0x00000010 /* Link register stack enable (7450) */ 72 #define HID0_ABE 0x00000008 /* Enable address broadcast */ 73 #define HID0_FOLD 0x00000008 /* Branch folding enable (7450) */ 74 #define HID0_BHT 0x00000004 /* Enable branch history table */ 75 #define HID0_BTCD 0x00000002 /* Branch target addr cache disable (604) */ 76 #define HID0_NOPTI 0x00000001 /* No-op the dcbt(st) */ 77 78 #define HID0_603_BITMASK \ 79 "\20" \ 80 "\040EMCP\037DBP\036EBA\035EBD\034BCLK\033EICE\032ECLK\031PAR" \ 81 "\030DOZE\027NAP\026SLEEP\025DPM\024RISEG\023EIEC\022res\021NHR" \ 82 "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011IFEM" \ 83 "\010SGE\007DCFA\006BTIC\005FBIOB\004ABE\003BHT\002NOPDST\001NOPTI" 84 85 #define HID0_7450_BITMASK \ 86 "\20" \ 87 "\040EMCP\037b1\036b2\035b3\034b4\033TBEN\032b6\031STEN" \ 88 "\030HBATEN\027NAP\026SLEEP\025DPM\024b12\023BHTCLR\022XAEN\021NHR" \ 89 "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011XBSEN" \ 90 "\010SGE\007b25\006BTIC\005LRSTK\004FOLD\003BHT\002NOPDST\001NOPTI" 91 92 #define HID0_970_BITMASK \ 93 "\20" \ 94 "\040ONEPPC\037SINGLE\036ISYNCSC\035SERGP\031DEEPNAP\030DOZE" \ 95 "\027NAP\025DPM\023TG\022HANGDETECT\021NHR\020INORDER" \ 96 "\016TBCTRL\015TBEN\012CIABREN\011HDICEEN" \ 97 "\010ENTHERM\001ENATTN" 98 99 /* 100 * HID0 bit definitions per cpu model 101 * 102 * bit 603 604 750 7400 7410 7450 7457 103 * 0 EMCP EMCP EMCP EMCP EMCP - - 104 * 1 - ECP DBP - - - - 105 * 2 EBA EBA EBA EBA EDA - - 106 * 3 EBD EBD EBD EBD EBD - - 107 * 4 SBCLK - BCLK BCKL BCLK - - 108 * 5 EICE - - - - TBEN TBEN 109 * 6 ECLK - ECLK ECLK ECLK - - 110 * 7 PAR PAR PAR PAR PAR STEN STEN 111 * 8 DOZE - DOZE DOZE DOZE - HBATEN 112 * 9 NAP - NAP NAP NAP NAP NAP 113 * 10 SLEEP - SLEEP SLEEP SLEEP SLEEP SLEEP 114 * 11 DPM - DPM DPM DPM DPM DPM 115 * 12 RISEG - - RISEG - - - 116 * 13 - - - EIEC EIEC BHTCLR BHTCLR 117 * 14 - - - - - XAEN XAEN 118 * 15 - NHR NHR NHR NHR NHR NHR 119 * 16 ICE ICE ICE ICE ICE ICE ICE 120 * 17 DCE DCE DCE DCE DCE DCE DCE 121 * 18 ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK 122 * 19 DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK 123 * 20 ICFI ICFI ICFI ICFI ICFI ICFI ICFI 124 * 21 DCFI DCFI DCFI DCFI DCFI DCFI DCFI 125 * 22 - - SPD SPD SPG SPD SPD 126 * 23 - - IFEM IFTT IFTT - XBSEN 127 * 24 - SIE SGE SGE SGE SGE SGE 128 * 25 - - DCFA DCFA DCFA - - 129 * 26 - - BTIC BTIC BTIC BTIC BTIC 130 * 27 FBIOB - - - - LRSTK LRSTK 131 * 28 - - ABE - - FOLD FOLD 132 * 29 - BHT BHT BHT BHT BHT BHT 133 * 30 - - - NOPDST NOPDST NOPDST NOPDST 134 * 31 NOOPTI - NOOPTI NOPTI NOPTI NOPTI NOPTI 135 * 136 * 604: ECP = Enable cache parity checking 137 * 604: SIE = Serial instruction execution disable 138 * 604: BTCD = Branch target address cache disable 139 * 7450: TBEN = Time Base Enable 140 * 7450: STEN = Software table lookup enable 141 * 7450: BHTCLR = Branch history clear 142 * 7450: XAEN = Extended Addressing Enabled 143 * 7450: LRSTK = Link Register Stack Enable 144 * 7450: FOLD = Branch folding enable 145 * 7457: HBATEN = High BAT Enable 146 * 7457: XBSEN = Extended BAT Block Size Enable 147 */ 148 149 #define HID1_EMCP 0x80000000 /* Machine Check Signal Enable */ 150 #define HID1_EBA 0x20000000 /* 60x bus address parity checking */ 151 #define HID1_EBD 0x10000000 /* 60x bus data parity checking */ 152 #define HID1_BCLK 0x08000000 /* CLK_OUT */ 153 #define HID1_ECLK 0x02000000 /* CLK_OUT */ 154 #define HID1_PAR 0x01000000 /* Disable precharge for ... */ 155 #define HID1_DFS4 0x00800000 /* Dynamic freq scaling / 4 (7448) */ 156 #define HID1_DFS2 0x00400000 /* Dynamic freq scaling / 2 (7447A) */ 157 158 #endif /* _POWERPC_HID_H_ */ 159