| /dports/sysutils/nut-devel/nut-9e6a5ab2/drivers/ |
| H A D | nutdrv_qx_blazer-common.c | 206 upslogx(LOG_ERR, "%s: ondelay '%ld' should not be negative", in blazer_process_setvar()
220 upslogx(LOG_ERR, "%s: offdelay '%ld' should not be negative", in blazer_process_setvar()
275 upslogx(LOG_ERR, "%s: offdelay '%ld' should not be negative", in blazer_process_command()
289 upslogx(LOG_ERR, "%s: offdelay '%ld' should not be negative", in blazer_process_command()
299 upslogx(LOG_ERR, "%s: offdelay '%ld' should not be negative", in blazer_process_command()
320 upslogx(LOG_ERR, "%s: offdelay '%ld' should not be negative", in blazer_process_command()
338 …upslogx(LOG_ERR, "%s: battery test time '%ld' out of range [60..5940] seconds", item->info_type, d… in blazer_process_command()
|
| H A D | dummy-ups.c | 424 upslogx(LOG_ERR, "Fatal error in parseconf(ups.conf): %s", errmsg); in upsconf_err()
|
| H A D | al175.c | 714 upslogx(LOG_ERR, "failed to send frame to PRS: %s", strerror(errno)); in tx()
719 upslogx(LOG_ERR, "sent incomplete frame to PRS"); in tx()
|
| H A D | netxml-ups.c | 331 upslogx(LOG_ERR, "NSM connection with '%s' lost", uri.host); in upsdrv_updateinfo()
|
| H A D | clone.c | 173 upslog_with_errno(LOG_ERR, "Can't create socket for UPS [%s]", device_path); in sstate_connect()
193 upslog_with_errno(LOG_ERR, "Can't connect to UPS [%s]", device_path); in sstate_connect()
200 upslog_with_errno(LOG_ERR, "fcntl get on UPS [%s] failed", device_path); in sstate_connect()
208 upslog_with_errno(LOG_ERR, "fcntl set O_NDELAY on UPS [%s] failed", device_path); in sstate_connect()
217 upslog_with_errno(LOG_ERR, "Initial write to UPS [%s] failed", device_path); in sstate_connect()
|
| H A D | upscode2.c | 1087 upslogx(LOG_ERR, "Missing UPCL after UPCL"); in upsc_commandlist()
1172 upslogx(LOG_ERR, "Unknown response to %s: %s %s", in upsc_getparams()
1190 upslogx(LOG_ERR, "Bad response to UPPM: %s", var); in check_uppm()
1199 upslogx(LOG_ERR, "Bad response to UPPM: %s", var); in check_uppm()
1238 upslogx(LOG_ERR, "Bad response to %s %s: %s %s", in upsc_getvalue()
1276 upslogx(LOG_ERR, "Bad float: %s %s", var, val); in upsc_simple()
1284 upslogx(LOG_ERR, "Bad float: %s %s", var, val); in upsc_simple()
1292 upslogx(LOG_ERR, "Bad float: %s %s", var, val); in upsc_simple()
1300 upslogx(LOG_ERR, "Bad float: %s %s", var, val); in upsc_simple()
1357 upslogx(LOG_ERR, "Unknown value: %s %s", in upsc_simple()
[all …]
|
| H A D | etapro.c | 87 upslogx(LOG_ERR, "no response from UPS"); in etapro_get_response()
93 upslogx(LOG_ERR, "bad response (%s)", tmp); in etapro_get_response()
113 upslogx(LOG_ERR, "bad response format (%s)", tmp); in etapro_get_response()
148 upslogx(LOG_ERR, "etapro_set_on_timer: error, status=0x%02x", x); in etapro_set_on_timer()
177 upslogx(LOG_ERR, "etapro_set_off_timer: error, status=0x%02x", x); in etapro_set_off_timer()
|
| H A D | nutdrv_qx_mecer.c | 214 upslogx(LOG_ERR, "Protocol [%s] is not supported by this driver", item->value); in voltronic_p98_protocol()
250 upslogx(LOG_ERR, "%s: non numerical value [%s]", item->info_type, value); in mecer_process_test_battery()
257 upslogx(LOG_ERR, in mecer_process_test_battery()
|
| H A D | snmp-ups.c | 1304 upslogx(LOG_ERR, "[%s] unhandled ASN 0x%x received from %s", in nut_snmp_get_int()
1328 upslogx(LOG_ERR, "[%s] %s: %s: %s", in nut_snmp_set()
1338 upslogx(LOG_ERR, "[%s] %s: %s: %s", in nut_snmp_set()
1392 upslogx(LOG_ERR, "[%s] %s: %s", in nut_snmp_perror()
1416 upslogx(LOG_ERR, "[%s] %s: Error in packet: %s", in nut_snmp_perror()
1426 upslogx(LOG_ERR, "[%s] %s: Timeout: no response from %s", in nut_snmp_perror()
1430 upslogx(LOG_ERR, "[%s] %s: %s", in nut_snmp_perror()
1761 upslogx(LOG_ERR, "No matching MIB found for sysOID '%s'!\n" \ in match_sysoid()
3547 upslogx(LOG_ERR, "%s: cannot set value %s for %s", __func__, arg[4], arg[3]); in parse_mibconf_args()
3563 upslogx(LOG_ERR, "Fatal error in parseconf (*mib.conf): %s", errmsg); in mibconf_err()
[all …]
|
| H A D | masterguard.c | 506 upslog_with_errno( LOG_ERR, "Error in UPS response " ); in upsdrv_updateinfo()
|
| H A D | upsdrvctl.c | 154 upslog_with_errno(LOG_ERR, "Can't open %s", pidfn); in stop_driver()
161 upslog_with_errno(LOG_ERR, "Can't open %s either", pidfn); in stop_driver()
174 upslog_with_errno(LOG_ERR, "Stopping %s failed", pidfn); in stop_driver()
|
| H A D | bcmxcp_ser.c | 69 upslogx(LOG_ERR, "%s(): error reading from ser_send_buf()", __func__); in send_command()
302 upslogx(LOG_ERR, "baud_rate option is invalid"); in pw_comm_setup()
377 …upslogx(LOG_ERR, "No response from UPS on %s with baudrate %llu", port, (unsigned long long int)ba… in pw_comm_setup()
|
| H A D | microdowell.c | 328 upslogx(LOG_ERR, "Unable to identify UPS serial # [%s]", PrintErr(ups.ErrCode)); in detect_hardware()
357 upslogx(LOG_ERR, "Unable to read Production date [%s]", PrintErr(ups.ErrCode)); in detect_hardware()
393 upslogx(LOG_ERR, "Unable to read UPS life info [%s]", PrintErr(ups.ErrCode)); in detect_hardware()
411 upslogx(LOG_ERR, "Unable to read Thresholds table 0 [%s]", PrintErr(ups.ErrCode)); in detect_hardware()
467 upslogx(LOG_ERR, "Unable to read Option Bytes [%s]", PrintErr(ups.ErrCode)); in detect_hardware()
491 upslogx(LOG_ERR, "Unable to read Input Sensitivity [%s]", PrintErr(ups.ErrCode)); in detect_hardware()
512 upslogx(LOG_ERR, "Unable to set UPS internal clock [%s]", PrintErr(ups.ErrCode)); in detect_hardware()
613 upslogx(LOG_ERR, "get 'Get Measures': %s", PrintErr(ups.ErrCode)); in upsdrv_updateinfo()
634 upslogx(LOG_ERR, "get 'Get Batt+Load Status': %s", PrintErr(ups.ErrCode)); in upsdrv_updateinfo()
678 upslogx(LOG_ERR, "'SdOneshot(turn_ON)': %s", PrintErr(ups.ErrCode)); in instcmd()
[all …]
|
| H A D | isbmex.c | 172 upslogx(LOG_ERR, "%s", s); in getpacket()
220 upslogx(LOG_ERR, "%s", s); in getpacket()
|
| H A D | nutdrv_atcl_usb.c | 492 upslogx(LOG_ERR, "Unknown status: 0x%02x", reply[0]); in upsdrv_updateinfo()
531 upslogx(LOG_ERR, in upsdrv_shutdown()
|
| H A D | powerp-bin.c | 278 upslogx(LOG_ERR, "%s: command [%s] [%s] failed", __func__, cmdname, extra); in powpan_instcmd()
282 upslogx(LOG_ERR, "%s: command [%s] not found", __func__, cmdname); in powpan_instcmd()
328 upslogx(LOG_ERR, "powpan_setvar: setting variable [%s] to [%s] failed", varname, val); in powpan_setvar()
332 upslogx(LOG_ERR, "powpan_setvar: [%s] is not valid for variable [%s]", val, varname); in powpan_setvar()
336 upslogx(LOG_ERR, "powpan_setvar: variable [%s] not found", varname); in powpan_setvar()
|
| H A D | bcmxcp.c | 357 upslogx(LOG_ERR, "s = %d, e = %d, f = %lu\n", s, e, f); in get_float()
1372 upslogx(LOG_ERR, "Short read from UPS"); in init_system_test_capabilities()
1622 upslogx(LOG_ERR, "Short read from UPS"); in upsdrv_updateinfo()
1663 upslogx(LOG_ERR, "Short read from UPS"); in upsdrv_updateinfo()
1705 upslogx(LOG_ERR, "Short read from UPS"); in upsdrv_updateinfo()
2170 upslogx(LOG_ERR, "[%s] Short read from UPS", cmdname); in decode_instcmd_exec()
2518 upslogx(LOG_ERR, "[%s] Short read from UPS", cmdname); in decode_setvar_exec()
|
| H A D | bcmxcp_usb.c | 355 upslogx(LOG_ERR, "CLOSING\n"); in upsdrv_cleanup()
|
| H A D | huawei-ups2000.c | 638 upslogx(LOG_ERR, "register %04d has invalid value %04x,", reg_id, val); in ups2000_update_info()
745 upslogx(LOG_ERR, "register %04d has invalid value %04x,", reg, val); in ups2000_update_status()
767 upslogx(LOG_ERR, "register %04d has invalid value %04x,", reg, val); in ups2000_update_status()
1018 if (loglevel <= LOG_ERR) { in ups2000_update_alarm()
1230 upslogx(LOG_ERR, "setvar: setting variable [%s] to [%s] failed", name, val); in setvar()
1360 upslogx(LOG_ERR, "servar: %s is invalid. " in ups2000_delay_get()
1534 upslogx(LOG_ERR, "instcmd: command [%s] failed", cmd); in instcmd()
1584 upslogx(LOG_ERR, "load.on error: invalid ups.status (%s) detected. " in ups2000_instcmd_load_on()
1610 upslogx(LOG_ERR, "bypass input is abnormal, refuse to enter bypass mode."); in ups2000_instcmd_bypass_start()
1953 upslogx(LOG_ERR, "Invalid register read from %04d detected. " in ups2000_read_registers()
[all …]
|
| H A D | nutdrv_siemens_sitop.c | 291 upslog_with_errno(LOG_ERR, "Cannot parse option max_polls_without_data"); in upsdrv_initups()
|
| H A D | rhino.c | 479 upslogx(LOG_ERR, "send_command() failed to allocate buffer"); in send_command()
534 upslogx(LOG_ERR, "Ups shutdown command sending failed"); in sendshut()
666 upslogx(LOG_ERR, "send_command 3 failed"); in instcmd()
675 upslogx(LOG_ERR, "send_command 4 failed"); in instcmd()
684 upslogx(LOG_ERR, "send_command 5 failed"); in instcmd()
693 upslogx(LOG_ERR, "send_command 6 failed"); in instcmd()
|
| H A D | clone-outlet.c | 157 upslog_with_errno(LOG_ERR, "Can't create socket for UPS [%s]", device_path); in sstate_connect()
177 upslog_with_errno(LOG_ERR, "Can't connect to UPS [%s]", device_path); in sstate_connect()
184 upslog_with_errno(LOG_ERR, "fcntl get on UPS [%s] failed", device_path); in sstate_connect()
192 upslog_with_errno(LOG_ERR, "fcntl set O_NDELAY on UPS [%s] failed", device_path); in sstate_connect()
201 upslog_with_errno(LOG_ERR, "Initial write to UPS [%s] failed", device_path); in sstate_connect()
|
| H A D | powerp-txt.c | 157 upslogx(LOG_ERR, "%s: command [%s] [%s] failed", __func__, cmdname, extra); in powpan_instcmd()
188 upslogx(LOG_ERR, "%s: command [%s] [%s] failed", __func__, cmdname, extra); in powpan_instcmd()
227 upslogx(LOG_ERR, "%s: setting variable [%s] to [%s] failed", __func__, varname, val); in powpan_setvar()
231 upslogx(LOG_ERR, "%s: variable [%s] not found", __func__, varname); in powpan_setvar()
|
| /dports/sysutils/nut-devel/nut-9e6a5ab2/common/ |
| H A D | upsconf.c | 66 upslogx(LOG_ERR, "Fatal error in parseconf(ups.conf): %s", errmsg); in upsconf_err()
85 upslogx(LOG_ERR, "Parse error: %s:%d: %s", in read_upsconf()
|
| H A D | common.c | 119 setlogmask(LOG_UPTO(LOG_ERR)); /* error conditions */ in open_syslog()
730 vupslog(LOG_ERR, fmt, va, use_strerror); in vfatal()
|