# This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # --- boiler-plate stuff --- # SHELL = /bin/sh CC = @CC@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include configdir = @myconfdir@ top_builddir = . ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL@ -s -m 755 INSTALL_DATA = @INSTALL@ -m 444 transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : CC = @CC@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs DEFS = @DEFS@ -DPACKAGE=\"$(PACKAGE)\" -DVERSION=\"$(VERSION)\" -I. -I$(srcdir) CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS_TRY = @LIBS@ @READLINE_LIBRARIES@ CFLAGS = @CFLAGS@ COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) LINK = $(CC) -O $(LDFLAGS) -o $@ TAR = tar GZIP = --best .SUFFIXES: # Delete the default suffixes .SUFFIXES: .c .o .h # Define our suffix list # # --- Files ------- # PROGRAMS = hsftp SOURCES = hsftp.c \ piper.c DIST_COMMON = readme license hsftp.1 acconfig.h configure.in configure \ install-sh mkinstalldirs hsftp.lsm config.h.in makefile.in \ hsftp.spec stamp-h.in bin_PROGRAMS = $(PROGRAMS) DISTFILES = $(DIST_COMMON) $(SOURCES) all: all-recursive all-am #---------------------------------------------------------- # # rules for automatic updating of configuration information # after changing the configuration files # #---------------------------------------------------------- $(srcdir)/makefile.in: makefile: $(srcdir)/makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status config.status: $(srcdir)/configure $(SHELL) ./config.status --recheck $(srcdir)/configure: $(srcdir)/configure.in $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && autoconf #autoheader might not change config.h.in, so touch a stamp file. ${srcdir}/config.h.in: stamp-h.in ${srcdir}/stamp-h.in: configure.in acconfig.h cd ${srcdir} && autoheader echo timestamp > ${srcdir}/stamp-h.in config.h: stamp-h stamp-h: config.h.in config.status ./config.status #---------------------------------------------------------- # # CLEAN rules # #---------------------------------------------------------- CONFIG_CLEAN_FILES = CLEANFILES = clean: clean-recursive clean-am distclean: distclean-recursive distclean-am distclean-depend -rm -f config.status -rm -f *.dat clean-am: clean-binPROGRAMS clean-compile clean-tags clean-depend \ clean-generic distclean-am: distclean-binPROGRAMS distclean-compile distclean-tags \ distclean-depend distclean-generic clean-am clean-binPROGRAMS: distclean-binPROGRAMS: -test -z "$(PROGRAMS)" || rm -f $(PROGRAMS) clean-compile: -rm -f *.o *.oo core *.core distclean-compile: -rm -f *.o *.oo core *.core clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -rm -f Makefile $(DISTCLEANFILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) clean-depend: distclean-depend: -rm -rf .deps clean-tags: distclean-tags: -rm -f TAGS ID #---------------------------------------------------------- # # INSTALLATION/UNINSTALL rules # #---------------------------------------------------------- install: install-recursive install-exec-am @: install-exec: install-exec-recursive install-exec-am @$(NORMAL_INSTALL) install-data: install-data-recursive install-exec-am: install-binPROGRAMS install-nobinDATA install-nobinDATA: @$(NORMAL_INSTALL) $(mkinstalldirs) $(mandir)/man1 @if test -f $(srcdir)/hsftp.1 ; then \ echo " $(INSTALL_DATA) $(srcdir)/hsftp.1 $(mandir)/man1/hsftp.1"; \ $(INSTALL_DATA) $(srcdir)/hsftp.1 $(mandir)/man1/hsftp.1; \ fi install-strip: $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install installdirs: installdirs-recursive uninstall: uninstall-recursive uninstall-am uninstall-am: uninstall-binPROGRAMS uninstall-nobinDATA uninstall-nobinDATA: @$(NORMAL_UNINSTALL) @echo " rm -f $(mandir)/man1/hsftp.1"; \ rm -f $(mandir)/man1/hsftp.1 install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ if test -f $$p; then \ echo " $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed '$(transform)'`"; \ $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed '$(transform)'`; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ echo " rm -f $(bindir)/`echo $$p|sed '$(transform)'`"; \ rm -f $(bindir)/`echo $$p|sed '$(transform)'`; \ done #---------------------------------------------------------- # # COMPILE rules # #---------------------------------------------------------- all-am: makefile $(PROGRAMS) piper.o: $(srcdir)/piper.c $(COMPILE) -o piper.o -c $(srcdir)/piper.c hsftp.o: $(srcdir)/hsftp.c $(COMPILE) -o hsftp.o -c $(srcdir)/hsftp.c hsftp: hsftp.o piper.o @-rm -f hsftp @echo "$(LINK) piper.o hsftp.o $(LIBS_TRY)"; \ $(LINK) piper.o hsftp.o $(LIBS_TRY) # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ list='$(SUBDIRS)'; for subdir in $$list; do \ target=`echo $@ | sed s/-recursive//`; \ echo "Making $$target in $$subdir"; \ (cd $$subdir && $(MAKE) $$target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" clean-recursive distclean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ done; \ for subdir in $$rev; do \ target=`echo $@ | sed s/-recursive//`; \ echo "Making $$target in $$subdir"; \ (cd $$subdir && $(MAKE) $$target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" #---------------------------------------------------------- # # DISTRIBUTION rules # #---------------------------------------------------------- distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. # # 1) make distribution tarfile # 2) unpack the tarfile into distdir # 3) create build and install directories # 4) do the build in the build dir, with sources from distdir # 5) check (there are no subdirs, thus does nothing) # 6) install # 7) installcheck (equal to check, does nothing) # distcheck: dist -rm -rf $(distdir) GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz mkdir $(distdir)/=build mkdir $(distdir)/=inst dc_install_base=`cd $(distdir)/=inst && pwd`; \ cd $(distdir)/=build \ && ../configure --srcdir=.. --prefix=$$dc_install_base \ && $(MAKE) \ && $(MAKE) check \ && $(MAKE) install \ && $(MAKE) installcheck -rm -rf $(distdir) @echo "========================"; \ echo "$(distdir).tar.gz is ready for distribution"; \ echo "========================" # # create a tarfile for the distibution # dist: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) # # same as dist # dist-all: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) # # create distribution directory and copy files into it # distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -f $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ fi; \ done check: all-am $(MAKE) check-recursive installcheck: installcheck-recursive .PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ mostlyclean-compile distclean-compile clean-compile \ maintainer-clean-compile install-data-recursive \ uninstall-data-recursive install-exec-recursive \ uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ all-recursive check-recursive installcheck-recursive info-recursive \ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir \ mostlyclean-depend distclean-depend clean-depend \ maintainer-clean-depend info dvi installcheck all-am install-exec-am \ uninstall-am install-exec install-data install uninstall all \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: