#Copyright 1989, 1990, 1991, 1992 Free Software Foundation, Inc. # This file is part of GDB. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. prefix = /usr/local program_transform_name = exec_prefix = $(prefix) bindir = /usr/bin libdir = $(exec_prefix)/lib tooldir = $(libdir)/$(target_alias) datadir = $(prefix)/lib mandir = $(prefix)/man man1dir = $(mandir)/man1 man2dir = $(mandir)/man2 man3dir = $(mandir)/man3 man4dir = $(mandir)/man4 man5dir = $(mandir)/man5 man6dir = $(mandir)/man6 man7dir = $(mandir)/man7 man8dir = $(mandir)/man8 man9dir = $(mandir)/man9 infodir = $(prefix)/info includedir = $(prefix)/include docdir = $(datadir)/doc SHELL = /bin/sh xbindir = /usr/bin/X11 xlibdir = /usr/lib/X11 INSTALL = install -c INSTALL_PROGRAM = $(INSTALL) INSTALL_DATA = $(INSTALL) AR = ar AR_FLAGS = qv RANLIB = ranlib # Flags that describe where you can find the termcap library. # This can be overridden in the host Makefile fragment file. TERMCAP = -ltermcap # System V: If you compile gdb with a compiler which uses the coff # encapsulation feature (this is a function of the compiler used, NOT # of the m-?.h file selected by config.gdb), you must make sure that # the GNU nm is the one that is used by munch. # If you are compiling with GCC, make sure that either 1) You use the # -traditional flag, or 2) You have the fixed include files where GCC # can reach them. Otherwise the ioctl calls in inflow.c # will be incorrectly compiled. The "fixincludes" script in the gcc # distribution will fix your include files up. #CC=cc #CC=gcc -traditional CC=gcc -O2 GCC=gcc # Directory containing source files. Don't clean up the spacing, # this exact string is matched for by the "configure" script. srcdir = . # It is also possible that you will need to add -I/usr/include/sys to the # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which # is where it should be according to Posix). BISON=yacc YACC=$(BISON) # Documentation (gdb.dvi) needs either GNU m4 or SysV m4; # Berkeley/Sun don't have quite enough. #M4=/usr/5bin/m4 M4=gm4 # where to find texinfo; GDB dist should include a recent one TEXIDIR=${srcdir}/../texinfo/fsf # where to find makeinfo, preferably one designed for texinfo-2 MAKEINFO=makeinfo # Set this up with gcc if you have gnu ld and the loader will print out # line numbers for undefinded refs. #CC-LD=gcc -static CC-LD=${CC} # Where is the "include" directory? Traditionally ../include or ./include INCLUDE_DIR = ${srcdir}/../include INCLUDE_DEP = $$(INCLUDE_DIR) # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc # or ./mmalloc (When we want the binary library built from it, we use # ${MMALLOC_DIR}${subdir}.) # Note that mmalloc can still be used on systems without mmap(). # To use your system malloc, comment out the following defines. MMALLOC_DIR = ${srcdir}/../mmalloc MMALLOC_DEP = $$(MMALLOC_DIR) MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a # To use your system malloc, uncomment MMALLOC_DISABLE. #MMALLOC_DISABLE = -DNO_MMALLOC # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK #MMALLOC_CHECK = -DNO_MMALLOC_CHECK MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE} # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.) BFD_DIR = ${srcdir}/../bfd BFD_DEP = $$(BFD_DIR) BFD_LIB = ./../bfd${subdir}/libbfd.a # Where is the source dir for the READLINE library? Traditionally in .. or . # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.) READLINE_DIR = ${srcdir}/../readline READLINE_DEP = $$(READLINE_DIR) RL_LIB = ./../readline${subdir}/libreadline.a # All the includes used for CFLAGS and for lint. # -I. for config files. # -I${srcdir} possibly for regex.h also. INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS # from the config/ directory. GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS} #PROFILE_CFLAGS = -pg # CFLAGS is specifically reserved for setting from the command line # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes". CFLAGS = -g # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} # None of the things in CFLAGS will do any harm, and on some systems # (e.g. SunOS4) it is important to use the MH_CFLAGS. LDFLAGS = $(CFLAGS) # Where is the "-liberty" library, containing getopt and obstack? LIBIBERTY_DIR = ${srcdir}/../libiberty LIBIBERTY = ./../libiberty${subdir}/libiberty.a # Where is the "-lopcodes" library, with (some of) the opcode tables and # disassemblers? OPCODES = ./../opcodes${subdir}/libopcodes.a # The config/mh-* file must define REGEX and REGEX1 on USG machines. # If your sysyem is missing alloca(), or, more likely, it's there but # it doesn't work, define ALLOCA & ALLOCA1 too. # Libraries and corresponding dependencies for compiling gdb. # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs. # TERMCAP comes after readline, since readline depends on it. CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \ ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS} CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \ ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} VERSION = 4.7 DIST=gdb LINT=/usr/5bin/lint LINTFLAGS= -I${BFD_DIR} # Host and target-dependent makefile fragments come in here. #### # End of host and target-dependent makefile fragments LBL_SRC = kcore.c remote-sl.c remote-fp.c kernel.c cmdparse.c LBL_OBJ = $(LBL_SRC:.c=.o) #SYMREADERS = dbxread.c coffread.c elfread.c dwarfread.c \ # xcoffread.c stabsread.c mipsread.c SYMREADERS = dbxread.c stabsread.c SYMREADOBJ = $(SYMREADERS:.c=.o) FLAGS_TO_PASS = \ "against=$(against)" \ "AR=$(AR)" \ "AR_FLAGS=$(AR_FLAGS)" \ "CC=$(CC)" \ "CFLAGS=$(CFLAGS) $(MT_CFLAGS)" \ "RANLIB=$(RANLIB)" \ "MAKEINFO=$(MAKEINFO)" \ "INSTALL=$(INSTALL)" \ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ "INSTALL_DATA=$(INSTALL_DATA)" \ "BISON=$(BISON)" # Source files in the main directory. # Files which are included via a config/* Makefile fragment # should *not* be specified here; they're in "ALLDEPFILES". SFILES_MAINDIR = \ blockframe.c breakpoint.c command.c core.c demangle.c \ environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \ main.c printcmd.c gdbtypes.c \ remote.c source.c stack.c symmisc.c symtab.c symfile.c \ utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \ mem-break.c target.c \ $(SYMREADERS) \ ieee-float.c language.c parse.c buildsym.c objfiles.c \ minsyms.c maint.c \ $(LBL_SRC) xgdb.c # Source files in subdirectories (which will be handled separately by # 'make gdb.tar.Z'). # Files which are included via a config/* Makefile fragment # should *not* be specified here; they're in "ALLDEPFILES". SFILES_SUBDIR = \ ${srcdir}/vx-share/dbgRpcLib.h \ ${srcdir}/vx-share/ptrace.h \ ${srcdir}/vx-share/reg.h \ ${srcdir}/vx-share/vxTypes.h \ ${srcdir}/vx-share/vxWorks.h \ ${srcdir}/vx-share/wait.h \ ${srcdir}/vx-share/xdr_ld.h \ ${srcdir}/vx-share/xdr_ptrace.h \ ${srcdir}/vx-share/xdr_rdb.h \ ${srcdir}/vx-share/xdr_regs.h \ ${srcdir}/nindy-share/b.out.h \ ${srcdir}/nindy-share/block_io.h \ ${srcdir}/nindy-share/coff.h \ ${srcdir}/nindy-share/demux.h \ ${srcdir}/nindy-share/env.h \ ${srcdir}/nindy-share/stop.h \ ${srcdir}/nindy-share/ttycntl.h # Non-source files in subdirs, that should go into gdb.tar.Z. NONSRC_SUBDIR = \ ${srcdir}/nindy-share/Makefile \ ${srcdir}/nindy-share/VERSION \ ${srcdir}/nindy-share/README \ ${srcdir}/vx-share/README # All source files that go into linking GDB, except config-specified files. SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR) # All source files that lint should look at LINTFILES = $(SFILES) $(YYFILES) init.c # Any additional files specified on these lines should also be added to # the OTHERS = definition below, so they go in the tar files. SFILES_STAND = $(SFILES) standalone.c SFILES_KGDB = $(SFILES) stuff.c kdb-start.c # Header files that are not named in config/* Makefile fragments go here. HFILES= breakpoint.h buildsym.h call-cmds.h command.h defs.h \ environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \ gdb-stabs.h ieee-float.h inferior.h language.h \ minimon.h objfiles.h parser-defs.h partial-stab.h \ serial.h signals.h solib.h symfile.h symtab.h stabsread.h \ target.h terminal.h xcoffsolib.h value.h \ tm-68k.h tm-hppa.h tm-i960.h tm-sparc.h tm-sunos.h tm-sysv4.h \ xm-m68k.h xm-sparc.h xm-sysv4.h xm-vax.h \ nm-i386bsd.h nm-i386mach.h nm-i386sco.h nm-i386v.h nm-i386v4.h nm-irix3.h \ nm-irix4.h nm-linux.h nm-m88k.h nm-mips.h nm-news.h nm-rs6000.h \ nm-sun2.h nm-sun3.h nm-sun386.h nm-sun4os4.h nm-trash.h \ nm-ultra3.h nm-hppab.h nm-hppah.h nm-umax.h nm-sysv4.h REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar POSSLIBS_MAINDIR = regex.c regex.h alloca.c POSSLIBS = $(POSSLIBS_MAINDIR) TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \ ChangeLog ChangeLog-9091 ChangeLog-3.x gdb.1 refcard.ps \ README TODO TAGS NEWS Projects \ .gdbinit COPYING $(YYFILES) \ copying.c Convex.notes copying.awk \ saber.suppress standalone.c stuff.c kdb-start.c \ putenv.c gcc.patch XGDB-README # Subdirectories of gdb, which should be included in their entirety in # gdb-xxx.tar.Z: TARDIRS = doc # tests # GDB "info" files, which should be included in their entirety INFOFILES = gdb.info* DEPFILES= ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES} SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES) TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \ ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR} TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES} OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ values.o eval.o valops.o valarith.o valprint.o printcmd.o \ symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \ command.o utils.o expprint.o environ.o gdbtypes.o \ copying.o $(DEPFILES) mem-break.o target.o \ ieee-float.o putenv.o parse.o language.o $(YYOBJ) \ buildsym.o objfiles.o minsyms.o maint.o demangle.o \ $(SYMREADOBJ) core.o \ $(LBL_OBJ) RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES) TSOBS = inflow.o NTSOBS = standalone.o TSSTART = /lib/crt0.o NTSSTART = kdb-start.o SUBDIRS = doc # For now, shortcut the "configure GDB for fewer languages" stuff. YYFILES = c-exp.tab.c m2-exp.tab.c YYOBJ = c-exp.tab.o m2-exp.tab.o # Prevent Sun make from putting in the machine type. Setting # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. .c.o: ${CC} -c ${INTERNAL_CFLAGS} $< all: gdb $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) check: info: force $(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) install-info: force $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) clean-info: force $(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) install.xgdb: xgdb rm -f $(xbindir)/xgdb install xgdb $(xbindir) install Xgdb.ad $(xlibdir)/app-defaults/Xgdb gdb.z:gdb.1 nroff -man $(srcdir)/gdb.1 | col -b > gdb.t pack gdb.t ; rm -f gdb.t mv gdb.t.z gdb.z install: gdb install -s gdb /usr/contrib/bin init.c: $(srcdir)/munch $(OBS) $(TSOBS) $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c xinit.c: $(srcdir)/munch $(OBS) $(TSOBS) xgdb.o rm -f xinit.c ./munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) xgdb.o > xinit.c xgdb: $(OBS) $(TSOBS) xgdb.o xinit.o ${ADD_DEPS} $(CC-LD) $(LDFLAGS) -o xgdb xinit.o xgdb.o \ $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES) \ -lXaw -lXmu -lXt -lXext -lX11 -lXwchar -lX11 gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \ init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES) saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS #load ./init.c $(SFILES) #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h #unload ${srcdir}/nindy-share/[A-Z]* #load c-exp.tab.c m2-exp.tab.c #load copying.c version.c #load ../opcodes/libopcodes.a #load ../libiberty/libiberty.a #load ../bfd/libbfd.a #load ../readline/libreadline.a #load ../mmalloc/libmmalloc.a #load -ltermcap #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'` echo "Load .c corresponding to:" $(DEPFILES) # This is useful when debugging GDB, because some Unix's don't let you run GDB # on itself without copying the executable. So "make gdb1" will make # gdb and put a copy in gdb1, and you can run it with "gdb gdb1". # Removing gdb1 before the copy is the right thing if gdb1 is open # in another process. gdb1: gdb rm -f gdb1 cp gdb gdb1 # This is a remote stub which runs under unix and starts up an # inferior process. This is at least useful for debugging GDB's # remote support. rapp: $(RAPP_OBS) rm -f rapp_init.c ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS) # Support for building Makefile out of configured pieces, automatically # generated dependencies, etc. alldeps.mak is a file that contains # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR, # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current # contents of the config subdirectory. alldeps.mak: ${srcdir}/config rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp for i in `ls -d ${srcdir}/config/*.m[ht]` ; do \ echo $$i >>allconfig.tmp; \ awk <$$i ' \ $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \ || $$1 == "NATDEPFILES=" { \ for (i = 2; i <= NF; i++) \ print $$i >> "alldeps.tmp" ; \ } \ $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE" { \ print $$2 >> "allparam.tmp" }' ; \ done sort alldeps2.tmp echo '# Start of "alldeps.mak" definitions' \ >>alldeps.mak; echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \ >>alldeps.mak; grep -v / alldeps2.tmp | \ awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \ NR == 0 {printf $$0;} \ NR != 0 {printf "\\\n" $$0} \ END {printf "\n\n"}' >>alldeps.mak; grep / alldeps2.tmp | \ awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \ NR == 0 {printf $$0;} \ NR != 0 {printf "\\\n" $$0} \ END {printf "\n\n"}' >>alldeps.mak; sort >alldeps.mak; sort >alldeps.mak; echo '# End of "alldeps.mak" definitions' \ >>alldeps.mak; rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp # The sed script makes everything which depends on {x,t}m.h depend on # config.status as well, in case someone reconfigures gdb out from # under an already compiled gdb. depend: $(SOURCES) Makefile.in @echo Ignore errors about non-existent system-supplied include files @echo for systems other than the one you are using. @echo Also ignore parse errors in valops.c, and any errors in @echo arm-convert.s. touch xm.h tm.h -$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \ -I${READLINE_DIR} $(INCLUDE_CFLAGS) \ `ls $(SOURCES) | grep -v '\.[hy]$$' | \ sort -u` >depend.tmp # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except # for xm.h and tm.h. This allows the same "depend" file to be used # by the various subdirectories. if [ "${srcdir}" = "." ] ; then \ depend.tm2; \ rm depend.tmp; \ mv depend.tm2 depend.tmp; \ fi depend rm depend.tmp config.status: @echo "You must configure gdb. Look at the README file for details." @false # This checks the configure.in file versus the config/ directory. config-check: config-check-hosts config-check-targets config-check-hosts: grep gdb_host= ${srcdir}/configure.in | \ sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o (cd ${srcdir}/config; ls *.mh) >HOSTdir.o diff -u HOSTconf.o HOSTdir.o config-check-targets: grep gdb_target= ${srcdir}/configure.in | \ sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o (cd ${srcdir}/config; ls *.mt) >TARGdir.o diff -u HOSTconf.o HOSTdir.o # These are not generated by "make depend" because they only are there # for some machines. # But these rules don't do what we want; we want to hack the foo.o: tm.h # dependency to do the right thing. tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h xm-news1000.h: xm-news.h xm-i386-sv32.h: xm-i386.h tm-i386gas.h: tm-i386.h xm-sun4os4.h: xm-sparc.h tm-sun4os4.h: tm-sparc.h xm-vaxult.h: xm-vax.h xm-vaxbsd.h: xm-vax.h kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS} rm -f init.c $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c $(CC) $(LDFLAGS) -c init.c $(CLIBS) ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \ -lc $(CLIBS) # Put the proper machine-specific files first. # createtags will edit the .o in DEPFILES into .c TAGS: ${TAGFILES} $(srcdir)/createtags $(TM_FILE) ${XM_FILE} ${NAT_FILE} \ $(DEPFILES) ${TAGFILES} tags: TAGS # Making distributions of GDB and friends. # Make a directory `proto-gdb.dir' that contains an image of the GDB # directory of the distribution, built up with symlinks. make-proto-gdb.dir: force_update $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 # Make a tar file containing the GDB directory of the distribution. gdb.tar.Z: force_update $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z # Update the "alldeps.mak" file in a source directory. update-alldeps: force_update ../configure none -norecursion rm -f alldeps.mak $(MAKE) $(MFLAGS) alldeps.mak # Update the "depend" and "alldeps.mak" files in a source directory. # We update alldeps.mak first, since it is used to generate the list # of files to be checked for dependencies. update-depend: update-alldeps force_update ../configure none -norecursion rm -f depend $(MAKE) $(MFLAGS) depend # Set up the GDB source directory for distribution, by building all files that # are products of other files. setup-to-dist: update-depend force_update ../configure none (cd doc; $(MAKE) $(MFLAGS) gdbVN.m4) $(MAKE) $(MFLAGS) gdb.info $(MAKE) $(MFLAGS) refcard.ps # Build a tar file from a proto-gdb.dir. gdb-$(VERSION).tar.Z: force_update rm -f gdb.tar gdb-$(VERSION).tar.Z $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 ln -s proto-gdb.dir $(DIST) tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z rm -rf $(DIST) proto-gdb.dir # Build a proto-gdb.dir after GDB has been set up for distribution. # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile # built in the setup-to-dist process, since it defines things like ALLCONFIG # and ALLDEPFILES, that we need. make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info rm -rf proto-gdb.dir mkdir proto-gdb.dir cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done cd proto-gdb.dir ; ln -s ../${INFOFILES} . cd proto-gdb.dir ; for i in ${TARDIRS}; do \ mkdir $$i; cd $$i; \ ln -s ../../$$i/* .; \ rm -rf SCCS CVS.adm RCS config.status; \ if test -f Makefile.in; then rm Makefile; else true; fi; done mkdir proto-gdb.dir/config cd proto-gdb.dir/config ; \ for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share cd proto-gdb.dir/config ; \ for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \ do ln -s ../../$$i ../$$i ; done chmod og=u `find . -print` clean: rm -f *.o ${ADD_FILES} *~ rm -f init.c version.c rm -f gdb core gdb.tar gdb.tar.Z make.log rm -f gdb[0-9] rm -f xgdb.o xgdb @$(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) distclean: clean c-exp.tab.c m2-exp.tab.c TAGS rm -f tm.h xm.h config.status rm -f y.output yacc.acts yacc.tmp rm -f ${TESTS} Makefile depend @$(MAKE) subdir_do DO=distclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) realclean: clean rm -f c-exp.tab.c m2-exp.tab.c TAGS rm -f tm.h xm.h config.status rm -f Makefile depend @$(MAKE) subdir_do DO=realclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb subdir_do: force @for i in $(DODIRS); do \ if [ -d ./$$i ] ; then \ if (cd ./$$i; \ $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \ else exit 1 ; fi ; \ else true ; fi ; \ done Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) $(SHELL) ./config.status force: # Documentation! # GDB QUICK REFERENCE (TeX dvi file, CM fonts) refcard.dvi: $(srcdir)/doc/refcard.tex ( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) ) mv ./doc/refcard.dvi . # GDB QUICK REFERENCE (PostScript output, common PS fonts) refcard.ps: $(srcdir)/doc/refcard.tex ( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) ) mv ./doc/refcard.ps . # GDB MANUAL: TeX dvi file gdb.dvi: ./doc/gdb-all.texi ( cd ./doc; $(MAKE) M4=$(M4) gdb.dvi $(FLAGS_TO_PASS) ) mv ./doc/gdb.dvi . # GDB MANUAL: info file gdb.info: ./doc/gdb-all.texi ( cd ./doc; $(MAKE) M4=$(M4) gdb.info $(FLAGS_TO_PASS) ) mv ./doc/gdb.info* . ./doc/gdb-all.texi: (cd ./doc; $(MAKE) M4=$(M4) gdb-all.texi $(FLAGS_TO_PASS) ) # Make copying.c from COPYING copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c version.c: Makefile echo 'char *version = "$(VERSION)";' >version.c # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist # in srcdir, then compiled in target dir to c-exp.tab.o. # Remove bogus decls for malloc/realloc/free which conflict with everything # else. c-exp.tab.o: c-exp.tab.c c-exp.tab.c: $(srcdir)/c-exp.y @echo 'Expect 4 shift/reduce conflicts.' ${YACC} $(srcdir)/c-exp.y -sed -e '/extern.*malloc/d' \ -e '/extern.*realloc/d' \ -e '/extern.*free/d' \ < y.tab.c > c-exp.tab.c -rm y.tab.c # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist # in srcdir, then compiled in target dir to m2-exp.tab.o. m2-exp.tab.o: m2-exp.tab.c m2-exp.tab.c: $(srcdir)/m2-exp.y ${YACC} $(srcdir)/m2-exp.y -sed -e '/extern.*malloc/d' \ -e '/extern.*realloc/d' \ -e '/extern.*free/d' \ < y.tab.c > m2-exp.tab.c -rm y.tab.c xgdb.o: defs.h symtab.h frame.h main.o: ${srcdir}/main.c ${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $< # The symbol-file readers have dependencies on BFD header files. dbxread.o: ${srcdir}/dbxread.c ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c coffread.o: ${srcdir}/coffread.c ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c mipsread.o: ${srcdir}/mipsread.c ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c elfread.o: ${srcdir}/elfread.c ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c dwarfread.o: ${srcdir}/dwarfread.c ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c stabsread.o: ${srcdir}/stabsread.c ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c xcoffread.o: ${srcdir}/xcoffread.c ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c xcoffexec.o: ${srcdir}/xcoffexec.c ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c # Drag in the files that are in another directory. xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_regs.c nindy.o: ${srcdir}/nindy-share/nindy.c ${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \ ${srcdir}/nindy-share/nindy.c Onindy.o: ${srcdir}/nindy-share/Onindy.c ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c ttybreak.o: ${srcdir}/nindy-share/ttybreak.c ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c ttyflush.o: ${srcdir}/nindy-share/ttyflush.c ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c lint: $(LINTFILES) $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \ `echo ${DEPFILES} | sed 's/\.o /\.c /g' gdb.cxref: $(SFILES) cxref -I. $(SFILES) >gdb.cxref force_update: # GNU Make has an annoying habit of putting *all* the Makefile variables # into the environment, unless you include this target as a circumvention. # Rumor is that this will be fixed (and this target can be removed) # in GNU Make 4.0. .NOEXPORT: # This is the end of "Makefile.in". When built into "Makefile" # by the configure script, two things are added below this point: # alldeps.mak -- defintions of all files that are used in # host- or target-dependent configurations # depend -- what .o files depend on what .c and .h files, # for all configurations.