Remove redundant space.

MFC after: 1 week

If the underlying provider doesn't support BIO_FLUSH, log it only once
and don't bother trying in the future.

MFC after: 3 days

After every activemap change flush disk's write cache, so that write
reordering won't make the actual write to be committed before marking
the coresponding extent as dirty.

It can be disabled in con

After every activemap change flush disk's write cache, so that write
reordering won't make the actual write to be committed before marking
the coresponding extent as dirty.

It can be disabled in configuration file.

If BIO_FLUSH is not supported by the underlying file system we log a warning
and never send BIO_FLUSH again to that GEOM provider.

MFC after: 3 days

show more ...

Keep statistics on number of BIO_READ, BIO_WRITE, BIO_DELETE and BIO_FLUSH
requests as well as number of activemap updates.

Number of BIO_WRITEs and activemap updates are especially interesting, bec

Keep statistics on number of BIO_READ, BIO_WRITE, BIO_DELETE and BIO_FLUSH
requests as well as number of activemap updates.

Number of BIO_WRITEs and activemap updates are especially interesting, because
if those two are too close to each other, it means that your workload needs
bigger number of dirty extents. Activemap should be updated as rarely as
possible.

MFC after: 1 week

show more ...

Rename ipv4/ipv6 to tcp4/tcp6.

MFC after: 3 weeks

In preparation for IPv6 support allow to specify multiple addresses to
listen on.

MFC after: 3 weeks

Increase default timeout from 5 seconds to 20 seconds. 5 seconds is definitely
to short under heavy load and I was experiencing those timeouts in my recent
tests.

MFC after: 1 week

The proto API is a general purpose API, so don't use 'hast' in structures or
function names. It can now be used outside of HAST.

MFC after: 1 week

In hast.conf we define the other node's address in 'remote' variable.
This way we know how to connect to secondary node when we are primary.
The same variable is used by the secondary node - it only

In hast.conf we define the other node's address in 'remote' variable.
This way we know how to connect to secondary node when we are primary.
The same variable is used by the secondary node - it only accepts
connections from the address stored in 'remote' variable.
In cluster configurations it is common that each node has its individual
IP address and there is one addtional shared IP address which is assigned
to primary node. It seems it is possible that if the shared IP address is
from the same network as the individual IP address it might be choosen by
the kernel as a source address for connection with the secondary node.
Such connection will be rejected by secondary, as it doesn't come from
primary node individual IP.

Add 'source' variable that allows to specify source IP address we want to
bind to before connecting to the secondary node.

MFC after: 1 week

show more ...

For secondary, set 2 * HAST_KEEPALIVE seconds timeout for incoming
connection so the worker will exit if it does not receive packets from
the primary during this interval.

Reported by: Christian Vog

For secondary, set 2 * HAST_KEEPALIVE seconds timeout for incoming
connection so the worker will exit if it does not receive packets from
the primary during this interval.

Reported by: Christian Vogt <Christian.Vogt@haw-hamburg.de>
Tested by: Christian Vogt <Christian.Vogt@haw-hamburg.de>
Approved by: pjd (mentor)
MFC after: 1 week

show more ...

Allow to compress on-the-wire data using two algorithms:
- HOLE - it simply turns all-zero blocks into few bytes header;
it is extremely fast, so it is turned on by default;
it is mostly intended t

Allow to compress on-the-wire data using two algorithms:
- HOLE - it simply turns all-zero blocks into few bytes header;
it is extremely fast, so it is turned on by default;
it is mostly intended to speed up initial synchronization
where we expect many zeros;
- LZF - very fast algorithm by Marc Alexander Lehmann, which shows
very decent compression ratio and has BSD license.

MFC after: 2 weeks

show more ...

Allow to checksum on-the-wire data using either CRC32 or SHA256.

MFC after: 2 weeks

Setup another socketpair between parent and child, so that primary sandboxed
worker can ask the main privileged process to connect in worker's behalf
and then we can migrate descriptor using this soc

Setup another socketpair between parent and child, so that primary sandboxed
worker can ask the main privileged process to connect in worker's behalf
and then we can migrate descriptor using this socketpair to worker.
This is not really needed now, but will be needed once we start to use
capsicum for sandboxing.

MFC after: 1 week

show more ...

Implement function that drops privileges by:
- chrooting to /var/empty (user hast home directory),
- setting groups to 'hast' (user hast primary group),
- setting real group id, effective group id an

Implement function that drops privileges by:
- chrooting to /var/empty (user hast home directory),
- setting groups to 'hast' (user hast primary group),
- setting real group id, effective group id and saved group id to 'hast',
- setting real user id, effective user id and saved user id to 'hast'.
At the end verify that those operations where successfull.

MFC after: 1 week

show more ...

Remember created control connection so on fork(2) we can close it in child.

Found with: procstat(1)
MFC after: 1 week

Because it is very hard to make fork(2) from threaded process safe (we are
limited to async-signal safe functions in the child process), move all hooks
execution to the main (non-threaded) process.

Because it is very hard to make fork(2) from threaded process safe (we are
limited to async-signal safe functions in the child process), move all hooks
execution to the main (non-threaded) process.

Do it by maintaining connection (socketpair) between child and parent
and sending events from the child to parent, so it can execute the hook.

This is step in right direction for others reasons too. For example there is
one less problem to drop privs in worker processes.

MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com

show more ...

Allow to execute specified program on various HAST events.

MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com

Implement keepalive mechanism inside HAST protocol so we can detect secondary
node failures quickly for HAST resources that are rarely modified.

Remove XXX from a comment now that the guard thread n

Implement keepalive mechanism inside HAST protocol so we can detect secondary
node failures quickly for HAST resources that are rarely modified.

Remove XXX from a comment now that the guard thread never sleeps infinitely.

MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com

show more ...

Prepare configuration parsing code to be called multiple times:
- Don't exit on errors if not requested.
- Don't keep configuration in global variable, but allocate memory for
configuration.
- Call

Prepare configuration parsing code to be called multiple times:
- Don't exit on errors if not requested.
- Don't keep configuration in global variable, but allocate memory for
configuration.
- Call yyrestart() before yyparse() so that on error in configuration file
we will start from the begining next time and not from the place we left of.

MFC after: 1 month

show more ...

MFC r207070,r207343,r207345,r207347,r207348,r207371,r207372,r207390:

r207070:

Fix compilation with WITHOUT_CRYPT or WITHOUT_OPENSSL options.

Reported by: Andrei V. Lavreniyuk <andy.lavr@reactor-xg

MFC r207070,r207343,r207345,r207347,r207348,r207371,r207372,r207390:

r207070:

Fix compilation with WITHOUT_CRYPT or WITHOUT_OPENSSL options.

Reported by: Andrei V. Lavreniyuk <andy.lavr@reactor-xg.kiev.ua>

r207343:

Don't assume that "resource" property is in metadata.

Reported by: Mikolaj Golub <to.my.trociny@gmail.com>

r207345:

Use WEXITSTATUS() to obtain real exit code.

r207347:

Mark temporary issues as such.

r207348:

Restart worker thread only if the problem was temporary.
In case of persistent problem we don't want to loop forever.

r207371:

Fix a problem where hastd will stuck in recv(2) after sending request to
secondary, which died between send(2) and recv(2). Do it by adding timeout
to recv(2) for primary incoming and outgoing sockets and secondary outgoing
socket.

Reported by: Mikolaj Golub <to.my.trociny@gmail.com>
Tested by: Mikolaj Golub <to.my.trociny@gmail.com>

r207372:

- Check if the worker process was killed by signal and restart it.
- Improve logging.

Pointed out by: Garrett Cooper <yanefbsd@gmail.com>

r207390:

Default connection timeout is way too long. To make it shorter we have to
make socket non-blocking, connect() and if we get EINPROGRESS, we have to
wait using select(). Very complex, but I know no other way to define
connection timeout for a given socket.

Reported by: hiroshi@soupacific.com

show more ...

Fix a problem where hastd will stuck in recv(2) after sending request to
secondary, which died between send(2) and recv(2). Do it by adding timeout
to recv(2) for primary incoming and outgoing socket

Fix a problem where hastd will stuck in recv(2) after sending request to
secondary, which died between send(2) and recv(2). Do it by adding timeout
to recv(2) for primary incoming and outgoing sockets and secondary outgoing
socket.

Reported by: Mikolaj Golub <to.my.trociny@gmail.com>
Tested by: Mikolaj Golub <to.my.trociny@gmail.com>
MFC after: 3 days

show more ...

MFC r204076,r204077,r204083,r205279:

r204076:

Please welcome HAST - Highly Avalable Storage.

HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP

MFC r204076,r204077,r204083,r205279:

r204076:

Please welcome HAST - Highly Avalable Storage.

HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP network. HAST works in Primary-Secondary
(Master-Backup, Master-Slave) configuration, which means that only one of the
cluster nodes can be active at any given time. Only Primary node is able to
handle I/O requests to HAST-managed devices. Currently HAST is limited to two
cluster nodes in total.

HAST operates on block level - it provides disk-like devices in /dev/hast/
directory for use by file systems and/or applications. Working on block level
makes it transparent for file systems and applications. There in no difference
between using HAST-provided device and raw disk, partition, etc. All of them
are just regular GEOM providers in FreeBSD.

For more information please consult hastd(8), hastctl(8) and hast.conf(5)
manual pages, as well as http://wiki.FreeBSD.org/HAST.

Sponsored by: FreeBSD Foundation
Sponsored by: OMCnet Internet Service GmbH
Sponsored by: TransIP BV

r204077:

Remove some lines left over by accident.

r204083:

Add missing KEYWORD line.

Pointed out by: dougb

r205279 sys:

Simplify loops.

show more ...

Please welcome HAST - Highly Avalable Storage.

HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP network. HAST works in Primary-Secondary
(Master

Please welcome HAST - Highly Avalable Storage.

HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP network. HAST works in Primary-Secondary
(Master-Backup, Master-Slave) configuration, which means that only one of the
cluster nodes can be active at any given time. Only Primary node is able to
handle I/O requests to HAST-managed devices. Currently HAST is limited to two
cluster nodes in total.

HAST operates on block level - it provides disk-like devices in /dev/hast/
directory for use by file systems and/or applications. Working on block level
makes it transparent for file systems and applications. There in no difference
between using HAST-provided device and raw disk, partition, etc. All of them
are just regular GEOM providers in FreeBSD.

For more information please consult hastd(8), hastctl(8) and hast.conf(5)
manual pages, as well as http://wiki.FreeBSD.org/HAST.

Sponsored by: FreeBSD Foundation
Sponsored by: OMCnet Internet Service GmbH
Sponsored by: TransIP BV

show more ...

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...