Lines Matching refs:UFS
6 UFS host controller. A value of '0' means auto-hibernate is not
8 idle time before the UFS host controller will autonomously put
12 maximum value of 102300000. Refer to the UFS Host Controller
18 Description: This file shows the device type. This is one of the UFS
20 the descriptor could be found at UFS specifications 2.1.
27 Description: This file shows the device class. This is one of the UFS
29 the descriptor could be found at UFS specifications 2.1.
36 Description: This file shows the UFS storage subclass. This is one of
37 the UFS device descriptor parameters. The full information
38 about the descriptor could be found at UFS specifications 2.1.
45 Description: This file shows the protocol supported by an UFS device.
46 This is one of the UFS device descriptor parameters.
48 at UFS specifications 2.1.
56 the UFS device descriptor parameters. The full information
57 about the descriptor could be found at UFS specifications 2.1.
65 This is one of the UFS device descriptor parameters.
67 at UFS specifications 2.1.
75 enabled for boot. This is one of the UFS device descriptor
77 be found at UFS specifications 2.1.
86 of the boot sequence. This is one of the UFS device descriptor
88 be found at UFS specifications 2.1.
97 the UFS device descriptor parameters. The full information
98 about the descriptor could be found at UFS specifications 2.1.
106 the UFS device descriptor parameters. The full information
107 about the descriptor could be found at UFS specifications 2.1.
115 the UFS device descriptor parameters. The full information
116 about the descriptor could be found at UFS specifications 2.1.
124 This is one of the UFS device descriptor parameters.
126 at UFS specifications 2.1.
134 latency. This is one of the UFS device descriptor parameters.
136 at UFS specifications 2.1.
144 of the UFS device descriptor parameters. The full information
145 about the descriptor could be found at UFS specifications 2.1.
153 of the UFS device descriptor parameters. The full information
154 about the descriptor could be found at UFS specifications 2.1.
162 This is one of the UFS device descriptor parameters.
164 at UFS specifications 2.1.
172 UFS device descriptor parameters. The full information about
173 the descriptor could be found at UFS specifications 2.1.
181 supported by the device. This is one of the UFS device
183 the descriptor could be found at UFS specifications 2.1.
191 clock update. This is one of the UFS device descriptor
193 could be found at UFS specifications 2.1.
201 This is one of the UFS device descriptor parameters.
203 found at UFS specifications 2.1.
211 UFS device descriptor parameters. The full information
212 about the descriptor could be found at UFS specifications 2.1.
220 UFS device descriptor parameters. The full information
221 about the descriptor could be found at UFS specifications 2.1.
229 UFS device descriptor parameters. The full information
230 about the descriptor could be found at UFS specifications 2.1.
238 supported by the device. This is one of the UFS device
240 the descriptor could be found at UFS specifications 2.1.
249 This is one of the UFS device descriptor parameters.
251 at UFS specifications 2.1.
259 in PSA state. This is one of the UFS device descriptor
261 be found at UFS specifications 2.1.
270 This is one of the UFS interconnect descriptor parameters.
272 UFS specifications 2.1.
280 This is one of the UFS interconnect descriptor parameters.
282 UFS specifications 2.1.
292 of the UFS geometry descriptor parameters. The full
294 UFS specifications 2.1.
302 supported by the UFS device. This is one of the UFS
304 the descriptor could be found at UFS specifications 2.1.
311 Description: This file shows the segment size. This is one of the UFS
313 the descriptor could be found at UFS specifications 2.1.
321 the UFS geometry descriptor parameters. The full information
322 about the descriptor could be found at UFS specifications 2.1.
330 is one of the UFS geometry descriptor parameters. The full
331 information about the descriptor could be found at UFS
340 of the UFS geometry descriptor parameters. The full
341 information about the descriptor could be found at UFS
350 of the UFS geometry descriptor parameters. The full
351 information about the descriptor could be found at UFS
360 is one of the UFS geometry descriptor parameters. The full
361 information about the descriptor could be found at UFS
370 is one of the UFS geometry descriptor parameters. The full
371 information about the descriptor could be found at UFS
380 in Security Protocol In/Out. This is one of the UFS geometry
382 descriptor could be found at UFS specifications 2.1.
390 is one of the UFS geometry descriptor parameters. The full
392 UFS specifications 2.1.
400 This is one of the UFS geometry descriptor parameters.
402 UFS specifications 2.1.
410 are supported by the device. This is one of the UFS geometry
412 descriptor could be found at UFS specifications 2.1.
420 the UFS geometry descriptor parameters. The full information
421 about the descriptor could be found at UFS specifications 2.1.
430 This is one of the UFS geometry descriptor parameters.
432 UFS specifications 2.1.
440 one of the UFS geometry descriptor parameters. The full
442 UFS specifications 2.1.
450 the UFS geometry descriptor parameters. The full
452 UFS specifications 2.1.
461 enhanced type 1-4). This is one of the UFS geometry
463 descriptor could be found at UFS specifications 2.1.
472 enhanced type 1-4). This is one of the UFS geometry
474 descriptor could be found at UFS specifications 2.1.
483 of the UFS health descriptor parameters. The full
485 UFS specifications 2.1.
493 (method a). This is one of the UFS health descriptor
495 could be found at UFS specifications 2.1.
503 (method b). This is one of the UFS health descriptor
505 could be found at UFS specifications 2.1.
514 active ICC levels from 0 to 15. This is one of the UFS
516 the descriptor could be found at UFS specifications 2.1.
526 UFS specifications 2.1.
534 about the descriptor could be found at UFS specifications 2.1.
542 about the descriptor could be found at UFS specifications 2.1.
551 UFS specifications 2.1.
560 UFS specifications 2.1.
569 the UFS unit descriptor parameters. The full information
570 about the descriptor could be found at UFS specifications 2.1.
578 the UFS unit descriptor parameters. The full information
579 about the descriptor could be found at UFS specifications 2.1.
586 Description: This file shows LUN queue depth. This is one of the UFS
588 the descriptor could be found at UFS specifications 2.1.
595 Description: This file shows PSA sensitivity. This is one of the UFS
597 the descriptor could be found at UFS specifications 2.1.
604 Description: This file shows LUN memory type. This is one of the UFS
606 the descriptor could be found at UFS specifications 2.1.
614 occurs during a write operation. This is one of the UFS
616 the descriptor could be found at UFS specifications 2.1.
625 the UFS unit descriptor parameters. The full information about
626 the descriptor could be found at UFS specifications 2.1.
634 This is one of the UFS unit descriptor parameters. The full
636 UFS specifications 2.1.
644 the UFS unit descriptor parameters. The full information
645 about the descriptor could be found at UFS specifications 2.1.
653 the UFS unit descriptor parameters. The full information
654 about the descriptor could be found at UFS specifications 2.1.
662 one of the UFS unit descriptor parameters. The full information
663 about the descriptor could be found at UFS specifications 2.1.
671 the UFS unit descriptor parameters. The full information
672 about the descriptor could be found at UFS specifications 2.1.
680 the UFS unit descriptor parameters. The full information
681 about the descriptor could be found at UFS specifications 2.1.
690 about the flag could be found at UFS specifications 2.1.
699 UFS specifications 2.1.
709 UFS specifications 2.1.
718 found at UFS specifications 2.1.
727 UFS specifications 2.1.
736 UFS specifications 2.1.
745 about the flag could be found at UFS specifications 2.1.
754 at UFS specifications 2.1.
762 Description: This file provides the boot lun enabled UFS device attribute.
764 UFS specifications 2.1.
771 Description: This file provides the current power mode UFS device attribute.
773 UFS specifications 2.1.
780 Description: This file provides the active icc level UFS device attribute.
782 UFS specifications 2.1.
789 Description: This file provides the out of order data transfer enabled UFS
791 could be found at UFS specifications 2.1.
798 Description: This file provides the background operations status UFS device
800 be found at UFS specifications 2.1.
807 Description: This file provides the purge operation status UFS device
809 be found at UFS specifications 2.1.
818 be found at UFS specifications 2.1.
827 about the attribute could be found at UFS specifications 2.1.
834 Description: This file provides the reference clock frequency UFS device
836 be found at UFS specifications 2.1.
845 UFS specifications 2.1. The file is read only.
853 UFS specifications 2.1.
860 Description: This file provides the exception event control UFS device
862 be found at UFS specifications 2.1.
869 Description: This file provides the exception event status UFS device
871 be found at UFS specifications 2.1.
878 Description: This file provides the ffu status UFS device attribute.
880 UFS specifications 2.1.
888 about the attribute could be found at UFS specifications 2.1.
898 UFS specifications 2.1.
909 the attribute could be found at UFS specifications 2.1.
917 Description: This entry could be used to set or show the UFS device
922 0 UFS device will stay active, UIC link will
924 1 UFS device will stay active, UIC link will
926 2 UFS device will be moved to sleep, UIC link will
928 3 UFS device will be moved to sleep, UIC link will
930 4 UFS device will be powered off, UIC link will
932 5 UFS device will be powered off, UIC link will
934 6 UFS device will be moved to deep sleep, UIC link
943 Description: This entry shows the target power mode of an UFS device
951 Description: This entry shows the target state of an UFS UIC link
959 Description: This entry could be used to set or show the UFS device
964 0 UFS device will stay active, UIC link will
966 1 UFS device will stay active, UIC link will
968 2 UFS device will be moved to sleep, UIC link will
970 3 UFS device will be moved to sleep, UIC link will
972 4 UFS device will be powered off, UIC link will
974 5 UFS device will be powered off, UIC link will
976 6 UFS device will be moved to deep sleep, UIC link
985 Description: This entry shows the target power mode of an UFS device
993 Description: This entry shows the target state of an UFS UIC link
1168 Description: This node is used to set or display whether UFS WriteBooster is
1169 enabled. Echo 0 to this file to disable UFS WriteBooster or 1 to