Lines Matching refs:ATM
2 ATM-FORUM-ILMI40-MIB DEFINITIONS ::= BEGIN
13 -- Inc. implimentation of the ATM Forum ILMI 4.0 mib. It use and distribution
14 -- is regulated by both Alcatel Internetworking, Inc. and the ATM Forum.
60 -- All representations of ATM addresses in this MIB Module use
76 -- ATM Service Categories use this data type (See [TM4.0]):
87 -- ATM End-System Addresses use this data type:
90 -- Network-Prefixes for an ATM Address use this data type:
95 -- 3.1.1.3 of the ATM Forum UNI Signalling 4.0 specification.
102 -- a subtree for defining ATM Forum MIB object types
113 -- a subtree for defining ATM Interface MIB object types
216 -- This group is mandatory for all ATM Interface devices.
226 information for the ATM Interface's physical interface."
235 the physical layer of an ATM Interface."
266 identifying the ATM Interface over which this message
351 "A unique value for each ATM interface. The scheme used to
352 number the ATM interfaces on an ATM device is
370 ATM device local to this IME. If this object is supported,
383 the operation of the ATM device local to this IME.
396 identifies the ATM device local to this IME."
400 -- The ATM Layer Group
401 -- This group is mandatory for all ATM Interfaces.
403 -- ATM-layer specific information for the ATM Interface.
410 "A table of ATM layer status and parameter information
411 for the ATM Interface."
420 the ATM layer of an ATM Interface."
464 identifying the ATM Interface over which this message
474 supported on this ATM Interface. For virtual interfaces
485 supported on this ATM Interface."
494 this ATM Interface. For virtual interfaces (i.e. Virtual Path
505 this ATM Interface."
513 "The maximum number of active VPI bits on this ATM Interface.
523 "The maximum number of active VCI bits on this ATM Interface."
531 "The type of the ATM device, either public or private."
545 "An indication of the latest version of the ATM Forum UNI
546 Signalling Specification that is supported on this ATM
565 "This object determines the type of the ATM device. This
566 object is used in automatic ATM Interface-Type determination
567 procedure such that a correct operational ATM
568 Interface-type can be determined. An ATM End System
569 shall take the value of user(1), and an ATM network
578 "An indication of the latest version of the ATM Forum
579 ILMI Specification that is supported on this ATM Interface.
600 "An indication of the latest version of the ATM Forum
602 ATM Interface. Note that the PNNI routing version is not
620 "The maximum VPI that the signalling stack on the ATM
630 "The maximum VPI that the signalling stack on the ATM
648 -- The ATM Statistics Group
728 -- This group is mandatory for all ATM Interfaces.
738 virtual path connections which cross this ATM
803 identifying the ATM Interface over which this message
813 local ATM Interface."
1041 virtual path connections which cross this ATM
1090 the ATM Interface over which this message was received."
1099 local ATM Interface."
1253 -- This group is mandatory for all ATM Interfaces.
1264 ATM Interface. There is one entry in this table for
1336 identifying the ATM Interface over which this message
1346 the local ATM Interface. For virtual interfaces (i.e.
1357 the local ATM Interface."
1614 virtual channel connections which cross this ATM
1665 the ATM Interface over which this message was received."
1674 local ATM Interface. For virtual interfaces (i.e. Virtual Path
1684 local ATM Interface."
1843 added or deleted at this ATM Interface or that the attributes
1846 reconfigured VPC at this ATM Interface."
1855 added or deleted at this ATM Interface or that the attributes
1858 of the reconfigured VCC at this ATM
1875 --network-prefix(es) for ATM-layer addresses in effect on
1885 --ATM-layer addresses in effect on the user-side IME.
1910 --which the network prefix for ATM addresses is in
1920 --"The network prefix for ATM addresses which is in
1921 --effect on the user side of the ATM UNI port."
1930 --for ATM addresses on the user side of the UNI port.
1959 ATM-layer addresses in effect on the user side of the UNI."
1967 "Information about a single ATM-layer address in effect
1993 which the ATM address is in effect. The value of 0
2002 "The ATM address which is in effect on the user side
2003 of the ATM UNI port."
2011 "An indication of the validity of the ATM address at
2057 localNetwork(1), if the registered address is an ATM group
2060 of ATM Forum UNI Signalling 4.0 for guidelines regarding
2063 This organization hierarchy may be mapped to ATM network's
2069 localNetwork(1) for ATM group addresses, and global(15)
2084 information for the ATM Interface."
2093 Registration administrative information for the ATM
2113 identifying the ATM Interface over which this message
2123 is supported on this ATM Interface. Supported(1)
2124 indicates that this ATM Interface supports address
2125 registration. Unsupported(2) indicates that this ATM
2140 -- ATM Name Server (ANS)
2156 the ATM UNI port contains all of the services that are
2192 identifying the ATM Interface over which this message
2221 containing different ATM addresses for the same service