#include #include #include #include #include #include "opcodes.h" #ifndef M3 #define M3 0 #endif /* The abstracted result of an CU21 insn */ typedef struct { uint64_t addr1; // target uint64_t len1; uint64_t addr2; // source uint64_t len2; uint32_t cc; } cu21_t; /* Define various input buffers. */ /* U+0000 to U+007f: Result is 1 byte for each uint16_t */ uint16_t pattern1[] = { 0x0000, 0x007f, /* corner cases */ 0x0047, 0x0056, 0x0045, 0x0021, 0x007b, 0x003a /* misc */ }; /* U+0080 to U+07ff: Result is 2 bytes for each uint16_t */ uint16_t pattern2[] = { 0x0080, 0x07ff, /* corner cases */ 0x07df, 0x008f, 0x0100, 0x017f, 0x052f, 0x0600, 0x06ff /* misc */ }; /* U+0800 to U+d7ff: Result is 3 bytes for each uint16_t U+dc00 to U+ffff: Result is 3 bytes for each uint16_t */ uint16_t pattern3[] = { 0x0800, 0xd7ff, /* corner cases */ 0xdc00, 0xffff, /* corner cases */ 0x083f, 0x1a21, 0x1b10, 0x2200, 0x225e, 0x22c9, 0xe001 /* misc */ }; /* U+d800 to U+dbff: Result is 4 bytes for each uint16_t pair */ uint16_t pattern4[] = { 0xd800, 0xdc00, /* left corner case */ 0xdbff, 0xdfff, /* right corner case */ 0xdada, 0xdddd, 0xdeaf, 0xdcdc /* misc */ }; /* Invalid low surrogate */ uint16_t invalid[] = { 0xd801, 0x0098 }; /* Mixed bytes */ uint16_t mixed[] = { 0x0078 /* 1 byte */, 0x0200 /* 2 bytes */, 0xffff /* 3 bytes */, 0xd800, 0xdc01 /* 4 bytes */ }; /* This is the buffer for the converted bytes. */ uint8_t buff[1000]; /* Large so we con'don't have to worry about it */ void write_and_check(uint16_t *, unsigned, unsigned); static cu21_t do_cu21(uint8_t *dst, uint64_t dst_len, uint16_t *src, uint64_t src_len) { int cc = 42; cu21_t regs; /* build up the register pairs */ register uint16_t *source asm("4") = src; register uint64_t source_len asm("5") = src_len; register uint8_t *dest asm("2") = dst; register uint64_t dest_len asm("3") = dst_len; asm volatile( CU21(M3,2,4) "ipm %2\n\t" "srl %2,28\n\t" : "+d"(dest), "+d"(source), "=d"(cc), "+d"(source_len), "+d"(dest_len) : : "memory", "cc"); /* Capture register contents at end of cu21 */ regs.addr1 = (uint64_t)dest; regs.len1 = dest_len; regs.addr2 = (uint64_t)source; regs.len2 = source_len; regs.cc = cc; return regs; } void run_test(uint8_t *dst, uint64_t dst_len, uint16_t *src, uint64_t src_len) { int i; cu21_t result; result = do_cu21(dst, dst_len, src, src_len); // Write out the converted bytes, if any printf("UTF8: "); if (dst_len - result.len1 == 0) printf(" "); else for (i = 0; i < dst_len - result.len1; i++) { printf(" %02x", dst[i]); } printf("\n"); printf(" cc = %d\n", result.cc); if (dst != NULL) printf(" dst address difference: %"PRId64, result.addr1 - (uint64_t)dst); printf(" dst len: %"PRId64"\n", result.len1); if (src != NULL) printf(" src address difference: %"PRId64, result.addr2 - (uint64_t)src); printf(" src len: %"PRId64"\n", result.len2); } int main() { /* Length == 0, no memory should be read or written */ printf("\n------------- test1 ----------------\n"); run_test(NULL, 0, NULL, 0); /* Test exhaustion of source length (source bytes are valid) */ printf("\n------------- test2.1 ----------------\n"); /* No character will be written to BUFF, i.e. loop in jitted code is not iterated */ run_test(buff, sizeof buff, NULL, 1); run_test(buff, sizeof buff, pattern1, 1); run_test(buff, sizeof buff, pattern2, 1); run_test(buff, sizeof buff, pattern3, 1); run_test(buff, sizeof buff, pattern4, 1); run_test(buff, sizeof buff, pattern4, 2); run_test(buff, sizeof buff, pattern4, 3); printf("\n------------- test2.2 ----------------\n"); /* At least one character will be written to BUFF, i.e. loop in jitted code is iterated */ run_test(buff, sizeof buff, pattern1, 3); run_test(buff, sizeof buff, pattern2, 5); run_test(buff, sizeof buff, pattern3, 7); run_test(buff, sizeof buff, pattern4, 9); run_test(buff, sizeof buff, pattern4, 10); run_test(buff, sizeof buff, pattern4, 11); /* Test exhaustion of destination length (source bytes are valid) */ printf("\n------------- test3.1 ----------------\n"); /* No character will be written to BUFF, i.e. loop in jitted code is not iterated */ /* Want to write a single byte */ run_test(NULL, 0, pattern1, sizeof pattern1); /* Want to write two bytes */ run_test(NULL, 0, pattern2, sizeof pattern2); run_test(NULL, 1, pattern2, sizeof pattern2); /* Want to write three bytes */ run_test(NULL, 0, pattern3, sizeof pattern3); run_test(NULL, 1, pattern3, sizeof pattern3); run_test(NULL, 2, pattern3, sizeof pattern3); /* Want to write four bytes */ run_test(NULL, 0, pattern4, sizeof pattern4); run_test(NULL, 1, pattern4, sizeof pattern4); run_test(NULL, 2, pattern4, sizeof pattern4); run_test(NULL, 3, pattern4, sizeof pattern4); printf("\n------------- test3.2 ----------------\n"); /* At least one character will be written to BUFF, i.e. loop in jitted code is iterated */ run_test(buff, 3, pattern1, sizeof pattern1); run_test(buff, 5, pattern2, sizeof pattern2); run_test(buff, 7, pattern3, sizeof pattern3); run_test(buff, 8, pattern3, sizeof pattern3); run_test(buff, 9, pattern4, sizeof pattern4); run_test(buff, 10, pattern4, sizeof pattern4); run_test(buff, 11, pattern4, sizeof pattern4); /* When both operands are exhausted, cc=0 takes precedence. (test1 tests this for len == 0) */ printf("\n------------- test4 ----------------\n"); run_test(buff, 6, pattern1, 6); /* Input has invalid low surrogate. */ printf("\n------------- test5 ----------------\n"); run_test(buff, sizeof buff, invalid, sizeof invalid); run_test(buff, 0, invalid, sizeof invalid); /* Convert all pattern buffers */ printf("\n------------- test6 ----------------\n"); run_test(buff, sizeof buff, pattern1, sizeof pattern1); run_test(buff, sizeof buff, pattern2, sizeof pattern2); run_test(buff, sizeof buff, pattern3, sizeof pattern3); run_test(buff, sizeof buff, pattern4, sizeof pattern4); run_test(buff, sizeof buff, mixed, sizeof mixed); /* Make sure we only write the exact number of bytes (and not more) */ uint16_t pat[2]; /* Write 1 byte */ printf("\n------------- test7.1 ----------------\n"); pat[0] = 0x10; write_and_check(pat, 2, 1); /* Write 2 bytes */ printf("\n------------- test7.2 ----------------\n"); pat[0] = 0x8f; write_and_check(pat, 2, 2); /* Write 3 bytes */ printf("\n------------- test7.3 ----------------\n"); pat[0] = 0x842; write_and_check(pat, 2, 3); /* Write 4 bytes */ printf("\n------------- test7.4 ----------------\n"); pat[0] = 0xd842; pat[1] = 0xdc42; write_and_check(pat, 2, 4); return 0; } void write_and_check_aux(uint16_t *input, unsigned num_input_bytes, unsigned num_expected_output_bytes, unsigned fill_byte) { int num_errors, i; /* Fill output buffer with FILL_BYTE */ memset(buff, fill_byte, sizeof buff); /* Execute cu21 */ run_test(buff, sizeof buff, input, num_input_bytes); /* Make sure the rest of the buffer is unmodified. */ num_errors = 0; for (i = num_expected_output_bytes; i < sizeof buff; ++i) if (buff[i] != fill_byte) ++num_errors; if (num_errors) fprintf(stderr, "*** wrote more than %u bytes\n", num_expected_output_bytes); } void write_and_check(uint16_t *input, unsigned num_input_bytes, unsigned num_expected_output_bytes) { write_and_check_aux(input, num_input_bytes, num_expected_output_bytes, 0x0); /* Run again with different fill pattern to make sure we did not write an extra 0x0 byte */ write_and_check_aux(input, num_input_bytes, num_expected_output_bytes, 0xFF); }