--- stage: Enablement group: Distribution info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments --- # Finding relevant log entries with a correlation ID **(FREE SELF)** GitLab instances log a unique request tracking ID (known as the "correlation ID") for most requests. Each individual request to GitLab gets its own correlation ID, which then gets logged in each GitLab component's logs for that request. This makes it easier to trace behavior in a distributed system. Without this ID it can be difficult or impossible to match correlating log entries. ## Identify the correlation ID for a request The correlation ID is logged in structured logs under the key `correlation_id` and in all response headers GitLab sends under the header `x-request-id`. You can find your correlation ID by searching in either place. ### Getting the correlation ID in your browser You can use your browser's developer tools to monitor and inspect network activity with the site that you're visiting. See the links below for network monitoring documentation for some popular browsers. - [Network Monitor - Firefox Developer Tools](https://developer.mozilla.org/en-US/docs/Tools/Network_Monitor) - [Inspect Network Activity In Chrome DevTools](https://developer.chrome.com/docs/devtools/network/) - [Safari Web Development Tools](https://developer.apple.com/safari/tools/) - [Microsoft Edge Network panel](https://docs.microsoft.com/en-us/microsoft-edge/devtools-guide-chromium/network/) To locate a relevant request and view its correlation ID: 1. Enable persistent logging in your network monitor. Some actions in GitLab will redirect you quickly after you submit a form, so this will help capture all relevant activity. 1. To help isolate the requests you are looking for, you can filter for `document` requests. 1. Click the request of interest to view further detail. 1. Go to the **Headers** section and look for **Response Headers**. There you should find an `x-request-id` header with a value that was randomly generated by GitLab for the request. See the following example: ![Firefox's network monitor showing an request ID header](img/network_monitor_xid.png) ### Getting the correlation ID from your logs Another approach to finding the correct correlation ID is to search or watch your logs and find the `correlation_id` value for the log entry that you're watching for. For example, let's say that you want learn what's happening or breaking when you reproduce an action in GitLab. You could tail the GitLab logs, filtering to requests by your user, and then watch the requests until you see what you're interested in. ### Getting the correlation ID from curl If you're using `curl` then you can use the verbose option to show request and response headers, as well as other debug information. ```shell ➜ ~ curl --verbose "https://gitlab.example.com/api/v4/projects" # look for a line that looks like this < x-request-id: 4rAMkV3gof4 ``` #### Using jq This example uses [jq](https://stedolan.github.io/jq/) to filter results and display values we most likely care about. ```shell sudo gitlab-ctl tail gitlab-rails/production_json.log | jq 'select(.username == "bob") | "User: \(.username), \(.method) \(.path), \(.controller)#\(.action), ID: \(.correlation_id)"' ``` ```plaintext "User: bob, GET /root/linux, ProjectsController#show, ID: U7k7fh6NpW3" "User: bob, GET /root/linux/commits/master/signatures, Projects::CommitsController#signatures, ID: XPIHpctzEg1" "User: bob, GET /root/linux/blob/master/README, Projects::BlobController#show, ID: LOt9hgi1TV4" ``` #### Using grep This example uses only `grep` and `tr`, which are more likely to be installed than `jq`. ```shell sudo gitlab-ctl tail gitlab-rails/production_json.log | grep '"username":"bob"' | tr ',' '\n' | egrep 'method|path|correlation_id' ``` ```plaintext {"method":"GET" "path":"/root/linux" "username":"bob" "correlation_id":"U7k7fh6NpW3"} {"method":"GET" "path":"/root/linux/commits/master/signatures" "username":"bob" "correlation_id":"XPIHpctzEg1"} {"method":"GET" "path":"/root/linux/blob/master/README" "username":"bob" "correlation_id":"LOt9hgi1TV4"} ``` ## Searching your logs for the correlation ID Once you have the correlation ID you can start searching for relevant log entries. You can filter the lines by the correlation ID itself. Combining a `find` and `grep` should be sufficient to find the entries you are looking for. ```shell # find -type f -mtime -0 exec grep '' '{}' '+' find /var/log/gitlab -type f -mtime 0 -exec grep 'LOt9hgi1TV4' '{}' '+' ``` ```plaintext /var/log/gitlab/gitlab-workhorse/current:{"correlation_id":"LOt9hgi1TV4","duration_ms":2478,"host":"gitlab.domain.tld","level":"info","method":"GET","msg":"access","proto":"HTTP/1.1","referrer":"https://gitlab.domain.tld/root/linux","remote_addr":"68.0.116.160:0","remote_ip":"[filtered]","status":200,"system":"http","time":"2019-09-17T22:17:19Z","uri":"/root/linux/blob/master/README?format=json\u0026viewer=rich","user_agent":"Mozilla/5.0 (Mac) Gecko Firefox/69.0","written_bytes":1743} /var/log/gitlab/gitaly/current:{"correlation_id":"LOt9hgi1TV4","grpc.code":"OK","grpc.meta.auth_version":"v2","grpc.meta.client_name":"gitlab-web","grpc.method":"FindCommits","grpc.request.deadline":"2019-09-17T22:17:47Z","grpc.request.fullMethod":"/gitaly.CommitService/FindCommits","grpc.request.glProjectPath":"root/linux","grpc.request.glRepository":"project-1","grpc.request.repoPath":"@hashed/6b/86/6b86b273ff34fce19d6b804eff5a3f5747ada4eaa22f1d49c01e52ddb7875b4b.git","grpc.request.repoStorage":"default","grpc.request.topLevelGroup":"@hashed","grpc.service":"gitaly.CommitService","grpc.start_time":"2019-09-17T22:17:17Z","grpc.time_ms":2319.161,"level":"info","msg":"finished streaming call with code OK","peer.address":"@","span.kind":"server","system":"grpc","time":"2019-09-17T22:17:19Z"} /var/log/gitlab/gitlab-rails/production_json.log:{"method":"GET","path":"/root/linux/blob/master/README","format":"json","controller":"Projects::BlobController","action":"show","status":200,"duration":2448.77,"view":0.49,"db":21.63,"time":"2019-09-17T22:17:19.800Z","params":[{"key":"viewer","value":"rich"},{"key":"namespace_id","value":"root"},{"key":"project_id","value":"linux"},{"key":"id","value":"master/README"}],"remote_ip":"[filtered]","user_id":2,"username":"bob","ua":"Mozilla/5.0 (Mac) Gecko Firefox/69.0","queue_duration":3.38,"gitaly_calls":1,"gitaly_duration":0.77,"rugged_calls":4,"rugged_duration_ms":28.74,"correlation_id":"LOt9hgi1TV4"} ``` ### Searching in distributed architectures If you have done some horizontal scaling in your GitLab infrastructure, then you will need to search across _all_ of your GitLab nodes. You can do this with some sort of log aggregation software like Loki, ELK, Splunk, or others. You can use a tool like Ansible or PSSH (parallel SSH) that can execute identical commands across your servers in parallel, or craft your own solution. ### Viewing the request in the Performance Bar You can use the [performance bar](../monitoring/performance/performance_bar.md) to view interesting data including calls made to SQL and Gitaly. To view the data, the correlation ID of the request must match the same session as the user viewing the performance bar. For API requests, this means that you must perform the request using the session cookie of the signed-in user. For example, if you want to view the database queries executed for the following API endpoint: ```shell https://gitlab.com/api/v4/groups/2564205/projects?with_security_reports=true&page=1&per_page=1 ``` First, enable the **Developer Tools** panel. See [Getting the correlation ID in your browser](#getting-the-correlation-id-in-your-browser) for details on how to do this. After developer tools have been enabled, obtain a session cookie as follows: 1. Visit while logged in. 1. Optional. Select **Fetch/XHR** request filter in the **Developer Tools** panel. This step is described for Google Chrome developer tools and is not strictly necessary, it just makes it easier to find the correct request. 1. Select the `results?request_id=` request on the left hand side. 1. The session cookie is displayed under the `Request Headers` section of the `Headers` panel. Right-click on the cookie value and select `Copy value`. ![Obtaining a session cookie for request](img/obtaining-a-session-cookie-for-request_v14_3.png) You have the value of the session cookie copied to your clipboard, for example: ```shell experimentation_subject_id=; _gitlab_session=; event_filter=all; visitor_id=; perf_bar_enabled=true; sidebar_collapsed=true; diff_view=inline; sast_entry_point_dismissed=true; auto_devops_settings_dismissed=true; cf_clearance=; collapsed_gutter=false; frequently_used_emojis=clap,thumbsup,rofl,tada,eyes,bow ``` Use the value of the session cookie to craft an API request by pasting it into a custom header of a `curl` request: ```shell $ curl --include "https://gitlab.com/api/v4/groups/2564205/projects?with_security_reports=true&page=1&per_page=1" \ --header 'cookie: experimentation_subject_id=; _gitlab_session=; event_filter=all; visitor_id=; perf_bar_enabled=true; sidebar_collapsed=true; diff_view=inline; sast_entry_point_dismissed=true; auto_devops_settings_dismissed=true; cf_clearance=; collapsed_gutter=false; frequently_used_emojis=clap,thumbsup,rofl,tada,eyes,bow' date: Tue, 28 Sep 2021 03:55:33 GMT content-type: application/json ... x-request-id: 01FGN8P881GF2E5J91JYA338Y3 ... [ { "id":27497069, "description":"Analyzer for images used on live K8S containers based on Starboard" }, "container_registry_image_prefix":"registry.gitlab.com/gitlab-org/security-products/analyzers/cluster-image-scanning", "..." ] ``` The response contains the data from the API endpoint, and a `correlation_id` value, returned in the `x-request-id` header, as described in the [Identify the correlation ID for a request](#identify-the-correlation-id-for-a-request) section. You can then view the database details for this request: 1. Paste the `x-request-id` value into the `request details` field of the [performance bar](../monitoring/performance/performance_bar.md) and press Enter/Return. This example uses the `x-request-id` value `01FGN8P881GF2E5J91JYA338Y3`, returned by the above response: ![Paste request ID into progress bar](img/paste-request-id-into-progress-bar_v14_3.png) 1. A new request is inserted into the `Request Selector` dropdown on the right-hand side of the Performance Bar. Select the new request to view the metrics of the API request: ![Select request ID from request selector drop down menu](img/select-request-id-from-request-selector-drop-down-menu_v14_3.png) 1. Select the `pg` link in the Progress Bar to view the database queries executed by the API request: ![View pg database details](img/view-pg-details_v14_3.png) The database query dialog is displayed: ![Database query dialog](img/database-query-dialog_v14_3.png)