/* * jwrjfif.c * * Copyright (C) 1991, 1992, 1993, Thomas G. Lane. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * * This file contains routines to write standard JPEG file headers/markers. * The file format created is a raw JPEG data stream with (optionally) an * APP0 marker per the JFIF spec. This will handle baseline and * JFIF-convention JPEG files, although there is currently no provision * for inserting a thumbnail image in the JFIF header. * * These routines may need modification for non-Unix environments or * specialized applications. As they stand, they assume output to * an ordinary stdio stream. However, the changes to write to something * else are localized in the macros appearing just below. * * These routines are invoked via the methods write_file_header, * write_scan_header, write_jpeg_data, write_scan_trailer, and * write_file_trailer. */ #include "jinclude.h" #ifdef JFIF_SUPPORTED /* * To output to something other than a stdio stream, you'd need to redefine * these macros. */ /* Write a single byte */ #define emit_byte(cinfo,x) putc((x), cinfo->output_file) /* Write some bytes from a (char *) buffer */ #define WRITE_BYTES(cinfo,dataptr,datacount) \ { if (JFWRITE(cinfo->output_file, dataptr, datacount) \ != (size_t) (datacount)) \ ERREXIT(cinfo->emethods, "Output file write error --- out of disk space?"); } /* Clean up and verify successful output */ #define CHECK_OUTPUT(cinfo) \ { fflush(cinfo->output_file); \ if (ferror(cinfo->output_file)) \ ERREXIT(cinfo->emethods, "Output file write error --- out of disk space?"); } /* End of stdio-specific code. */ typedef enum { /* JPEG marker codes */ M_SOF0 = 0xc0, M_SOF1 = 0xc1, M_SOF2 = 0xc2, M_SOF3 = 0xc3, M_SOF5 = 0xc5, M_SOF6 = 0xc6, M_SOF7 = 0xc7, M_JPG = 0xc8, M_SOF9 = 0xc9, M_SOF10 = 0xca, M_SOF11 = 0xcb, M_SOF13 = 0xcd, M_SOF14 = 0xce, M_SOF15 = 0xcf, M_DHT = 0xc4, M_DAC = 0xcc, M_RST0 = 0xd0, M_RST1 = 0xd1, M_RST2 = 0xd2, M_RST3 = 0xd3, M_RST4 = 0xd4, M_RST5 = 0xd5, M_RST6 = 0xd6, M_RST7 = 0xd7, M_SOI = 0xd8, M_EOI = 0xd9, M_SOS = 0xda, M_DQT = 0xdb, M_DNL = 0xdc, M_DRI = 0xdd, M_DHP = 0xde, M_EXP = 0xdf, M_APP0 = 0xe0, M_APP15 = 0xef, M_JPG0 = 0xf0, M_JPG13 = 0xfd, M_COM = 0xfe, M_TEM = 0x01, M_ERROR = 0x100 } JPEG_MARKER; LOCAL void emit_marker (compress_info_ptr cinfo, JPEG_MARKER mark) /* Emit a marker code */ { emit_byte(cinfo, 0xFF); emit_byte(cinfo, mark); } LOCAL void emit_2bytes (compress_info_ptr cinfo, int value) /* Emit a 2-byte integer; these are always MSB first in JPEG files */ { emit_byte(cinfo, (value >> 8) & 0xFF); emit_byte(cinfo, value & 0xFF); } LOCAL int emit_dqt (compress_info_ptr cinfo, int index) /* Emit a DQT marker */ /* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */ { QUANT_TBL_PTR data = cinfo->quant_tbl_ptrs[index]; int prec = 0; int i; for (i = 0; i < DCTSIZE2; i++) { if (data[i] > 255) prec = 1; } emit_marker(cinfo, M_DQT); emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2); emit_byte(cinfo, index + (prec<<4)); for (i = 0; i < DCTSIZE2; i++) { if (prec) emit_byte(cinfo, data[i] >> 8); emit_byte(cinfo, data[i] & 0xFF); } return prec; } LOCAL void emit_dht (compress_info_ptr cinfo, int index, boolean is_ac) /* Emit a DHT marker */ { HUFF_TBL * htbl; int length, i; if (is_ac) { htbl = cinfo->ac_huff_tbl_ptrs[index]; index += 0x10; /* output index has AC bit set */ } else { htbl = cinfo->dc_huff_tbl_ptrs[index]; } if (htbl == NULL) ERREXIT1(cinfo->emethods, "Huffman table 0x%02x was not defined", index); if (! htbl->sent_table) { emit_marker(cinfo, M_DHT); length = 0; for (i = 1; i <= 16; i++) length += htbl->bits[i]; emit_2bytes(cinfo, length + 2 + 1 + 16); emit_byte(cinfo, index); for (i = 1; i <= 16; i++) emit_byte(cinfo, htbl->bits[i]); for (i = 0; i < length; i++) emit_byte(cinfo, htbl->huffval[i]); htbl->sent_table = TRUE; } } LOCAL void emit_dac (compress_info_ptr cinfo) /* Emit a DAC marker */ /* Since the useful info is so small, we want to emit all the tables in */ /* one DAC marker. Therefore this routine does its own scan of the table. */ { char dc_in_use[NUM_ARITH_TBLS]; char ac_in_use[NUM_ARITH_TBLS]; int length, i; for (i = 0; i < NUM_ARITH_TBLS; i++) dc_in_use[i] = ac_in_use[i] = 0; for (i = 0; i < cinfo->num_components; i++) { dc_in_use[cinfo->comp_info[i].dc_tbl_no] = 1; ac_in_use[cinfo->comp_info[i].ac_tbl_no] = 1; } length = 0; for (i = 0; i < NUM_ARITH_TBLS; i++) length += dc_in_use[i] + ac_in_use[i]; emit_marker(cinfo, M_DAC); emit_2bytes(cinfo, length*2 + 2); for (i = 0; i < NUM_ARITH_TBLS; i++) { if (dc_in_use[i]) { emit_byte(cinfo, i); emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); } if (ac_in_use[i]) { emit_byte(cinfo, i + 0x10); emit_byte(cinfo, cinfo->arith_ac_K[i]); } } } LOCAL void emit_dri (compress_info_ptr cinfo) /* Emit a DRI marker */ { emit_marker(cinfo, M_DRI); emit_2bytes(cinfo, 4); /* fixed length */ emit_2bytes(cinfo, (int) cinfo->restart_interval); } LOCAL void emit_sof (compress_info_ptr cinfo, JPEG_MARKER code) /* Emit a SOF marker */ { int i; emit_marker(cinfo, code); emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ if (cinfo->image_height > 65535L || cinfo->image_width > 65535L) ERREXIT(cinfo->emethods, "Maximum image dimension for JFIF is 65535 pixels"); emit_byte(cinfo, cinfo->data_precision); emit_2bytes(cinfo, (int) cinfo->image_height); emit_2bytes(cinfo, (int) cinfo->image_width); emit_byte(cinfo, cinfo->num_components); for (i = 0; i < cinfo->num_components; i++) { emit_byte(cinfo, cinfo->comp_info[i].component_id); emit_byte(cinfo, (cinfo->comp_info[i].h_samp_factor << 4) + cinfo->comp_info[i].v_samp_factor); emit_byte(cinfo, cinfo->comp_info[i].quant_tbl_no); } } LOCAL void emit_sos (compress_info_ptr cinfo) /* Emit a SOS marker */ { int i; emit_marker(cinfo, M_SOS); emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */ emit_byte(cinfo, cinfo->comps_in_scan); for (i = 0; i < cinfo->comps_in_scan; i++) { emit_byte(cinfo, cinfo->cur_comp_info[i]->component_id); emit_byte(cinfo, (cinfo->cur_comp_info[i]->dc_tbl_no << 4) + cinfo->cur_comp_info[i]->ac_tbl_no); } emit_byte(cinfo, 0); /* Spectral selection start */ emit_byte(cinfo, DCTSIZE2-1); /* Spectral selection end */ emit_byte(cinfo, 0); /* Successive approximation */ } LOCAL void emit_jfif_app0 (compress_info_ptr cinfo) /* Emit a JFIF-compliant APP0 marker */ { /* * Length of APP0 block (2 bytes) * Block ID (4 bytes - ASCII "JFIF") * Zero byte (1 byte to terminate the ID string) * Version Major, Minor (2 bytes - 0x01, 0x01) * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm) * Xdpu (2 bytes - dots per unit horizontal) * Ydpu (2 bytes - dots per unit vertical) * Thumbnail X size (1 byte) * Thumbnail Y size (1 byte) */ emit_marker(cinfo, M_APP0); emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */ emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */ emit_byte(cinfo, 0x46); emit_byte(cinfo, 0x49); emit_byte(cinfo, 0x46); emit_byte(cinfo, 0); emit_byte(cinfo, 1); /* Major version */ emit_byte(cinfo, 1); /* Minor version */ emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */ emit_2bytes(cinfo, (int) cinfo->X_density); emit_2bytes(cinfo, (int) cinfo->Y_density); emit_byte(cinfo, 0); /* No thumbnail image */ emit_byte(cinfo, 0); } LOCAL void emit_com (compress_info_ptr cinfo, char * dataptr, size_t datalen) /* Emit a COM marker */ { if ((unsigned) datalen <= (unsigned) 65533) { /* safety check */ emit_marker(cinfo, M_COM); emit_2bytes(cinfo, (int) (datalen + 2)); /* length */ while (datalen--) { emit_byte(cinfo, *dataptr); dataptr++; } } } /* * Write the file header. */ METHODDEF void write_file_header (compress_info_ptr cinfo) { char qt_in_use[NUM_QUANT_TBLS]; int i, prec; boolean is_baseline; emit_marker(cinfo, M_SOI); /* first the SOI */ if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */ emit_jfif_app0(cinfo); if (cinfo->comment_text != NULL) /* and an optional COM block */ emit_com(cinfo, cinfo->comment_text, (size_t) (strlen(cinfo->comment_text))); /* Emit DQT for each quantization table. */ /* Note that doing it here means we can't adjust the QTs on-the-fly. */ /* If we did want to do that, we'd have a problem with checking precision */ /* for the is_baseline determination. */ for (i = 0; i < NUM_QUANT_TBLS; i++) qt_in_use[i] = 0; for (i = 0; i < cinfo->num_components; i++) qt_in_use[cinfo->comp_info[i].quant_tbl_no] = 1; prec = 0; for (i = 0; i < NUM_QUANT_TBLS; i++) { if (qt_in_use[i]) prec += emit_dqt(cinfo, i); } /* now prec is nonzero iff there are any 16-bit quant tables. */ /* Check for a non-baseline specification. */ /* Note we assume that Huffman table numbers won't be changed later. */ is_baseline = TRUE; if (cinfo->arith_code || (cinfo->data_precision != 8)) is_baseline = FALSE; for (i = 0; i < cinfo->num_components; i++) { if (cinfo->comp_info[i].dc_tbl_no > 1 || cinfo->comp_info[i].ac_tbl_no > 1) is_baseline = FALSE; } if (prec && is_baseline) { is_baseline = FALSE; /* If it's baseline except for quantizer size, warn the user */ TRACEMS(cinfo->emethods, 0, "Caution: quantization tables are too coarse for baseline JPEG"); } /* Emit the proper SOF marker */ if (cinfo->arith_code) emit_sof(cinfo, M_SOF9); /* SOF code for arithmetic coding */ else if (is_baseline) emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */ else emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ } /* * Write the start of a scan (everything through the SOS marker). */ METHODDEF void write_scan_header (compress_info_ptr cinfo) { int i; if (cinfo->arith_code) { /* Emit arith conditioning info. We will have some duplication * if the file has multiple scans, but it's so small it's hardly * worth worrying about. */ emit_dac(cinfo); } else { /* Emit Huffman tables. Note that emit_dht takes care of * suppressing duplicate tables. */ for (i = 0; i < cinfo->comps_in_scan; i++) { emit_dht(cinfo, cinfo->cur_comp_info[i]->dc_tbl_no, FALSE); emit_dht(cinfo, cinfo->cur_comp_info[i]->ac_tbl_no, TRUE); } } /* Emit DRI if required --- note that DRI value could change for each scan. * If it doesn't, a tiny amount of space is wasted in multiple-scan files. * We assume DRI will never be nonzero for one scan and zero for a later one. */ if (cinfo->restart_interval) emit_dri(cinfo); emit_sos(cinfo); } /* * Write some bytes of compressed data within a scan. */ METHODDEF void write_jpeg_data (compress_info_ptr cinfo, char *dataptr, int datacount) { WRITE_BYTES(cinfo, dataptr, datacount); } /* * Finish up after a compressed scan (series of write_jpeg_data calls). */ METHODDEF void write_scan_trailer (compress_info_ptr cinfo) { /* no work needed in this format */ } /* * Finish up at the end of the file. */ METHODDEF void write_file_trailer (compress_info_ptr cinfo) { emit_marker(cinfo, M_EOI); /* Make sure we wrote the output file OK */ CHECK_OUTPUT(cinfo); } /* * The method selection routine for standard JPEG header writing. * This should be called from c_ui_method_selection if appropriate. */ GLOBAL void jselwjfif (compress_info_ptr cinfo) { cinfo->methods->write_file_header = write_file_header; cinfo->methods->write_scan_header = write_scan_header; cinfo->methods->write_jpeg_data = write_jpeg_data; cinfo->methods->write_scan_trailer = write_scan_trailer; cinfo->methods->write_file_trailer = write_file_trailer; } #endif /* JFIF_SUPPORTED */