1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * Copyright (c) 1999-2002 Vojtech Pavlik 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published by 7 * the Free Software Foundation. 8 */ 9 #ifndef _UAPI_INPUT_H 10 #define _UAPI_INPUT_H 11 12 13 #ifndef __KERNEL__ 14 #include <sys/time.h> 15 #include <sys/ioctl.h> 16 #include <sys/types.h> 17 #include <linux/types.h> 18 #endif 19 20 #include "input-event-codes.h" 21 22 /* 23 * The event structure itself 24 * Note that __USE_TIME_BITS64 is defined by libc based on 25 * application's request to use 64 bit time_t. 26 */ 27 28 struct input_event { 29 #if (__BITS_PER_LONG != 32 || !defined(__USE_TIME_BITS64)) && !defined(__KERNEL__) 30 struct timeval time; 31 #define input_event_sec time.tv_sec 32 #define input_event_usec time.tv_usec 33 #else 34 __kernel_ulong_t __sec; 35 #if defined(__sparc__) && defined(__arch64__) 36 unsigned int __usec; 37 unsigned int __pad; 38 #else 39 __kernel_ulong_t __usec; 40 #endif 41 #define input_event_sec __sec 42 #define input_event_usec __usec 43 #endif 44 __u16 type; 45 __u16 code; 46 __s32 value; 47 }; 48 49 /* 50 * Protocol version. 51 */ 52 53 #define EV_VERSION 0x010001 54 55 /* 56 * IOCTLs (0x00 - 0x7f) 57 */ 58 59 struct input_id { 60 __u16 bustype; 61 __u16 vendor; 62 __u16 product; 63 __u16 version; 64 }; 65 66 /** 67 * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls 68 * @value: latest reported value for the axis. 69 * @minimum: specifies minimum value for the axis. 70 * @maximum: specifies maximum value for the axis. 71 * @fuzz: specifies fuzz value that is used to filter noise from 72 * the event stream. 73 * @flat: values that are within this value will be discarded by 74 * joydev interface and reported as 0 instead. 75 * @resolution: specifies resolution for the values reported for 76 * the axis. 77 * 78 * Note that input core does not clamp reported values to the 79 * [minimum, maximum] limits, such task is left to userspace. 80 * 81 * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z, 82 * ABS_MT_POSITION_X, ABS_MT_POSITION_Y) is reported in units 83 * per millimeter (units/mm), resolution for rotational axes 84 * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. 85 * The resolution for the size axes (ABS_MT_TOUCH_MAJOR, 86 * ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MAJOR, ABS_MT_WIDTH_MINOR) 87 * is reported in units per millimeter (units/mm). 88 * When INPUT_PROP_ACCELEROMETER is set the resolution changes. 89 * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in 90 * units per g (units/g) and in units per degree per second 91 * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ). 92 */ 93 struct input_absinfo { 94 __s32 value; 95 __s32 minimum; 96 __s32 maximum; 97 __s32 fuzz; 98 __s32 flat; 99 __s32 resolution; 100 }; 101 102 /** 103 * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls 104 * @scancode: scancode represented in machine-endian form. 105 * @len: length of the scancode that resides in @scancode buffer. 106 * @index: index in the keymap, may be used instead of scancode 107 * @flags: allows to specify how kernel should handle the request. For 108 * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel 109 * should perform lookup in keymap by @index instead of @scancode 110 * @keycode: key code assigned to this scancode 111 * 112 * The structure is used to retrieve and modify keymap data. Users have 113 * option of performing lookup either by @scancode itself or by @index 114 * in keymap entry. EVIOCGKEYCODE will also return scancode or index 115 * (depending on which element was used to perform lookup). 116 */ 117 struct input_keymap_entry { 118 #define INPUT_KEYMAP_BY_INDEX (1 << 0) 119 __u8 flags; 120 __u8 len; 121 __u16 index; 122 __u32 keycode; 123 __u8 scancode[32]; 124 }; 125 126 struct input_mask { 127 __u32 type; 128 __u32 codes_size; 129 __u64 codes_ptr; 130 }; 131 132 #define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ 133 #define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ 134 #define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ 135 #define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ 136 137 #define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ 138 #define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) 139 #define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ 140 #define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) 141 142 #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ 143 #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ 144 #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ 145 #define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ 146 147 /** 148 * EVIOCGMTSLOTS(len) - get MT slot values 149 * @len: size of the data buffer in bytes 150 * 151 * The ioctl buffer argument should be binary equivalent to 152 * 153 * struct input_mt_request_layout { 154 * __u32 code; 155 * __s32 values[num_slots]; 156 * }; 157 * 158 * where num_slots is the (arbitrary) number of MT slots to extract. 159 * 160 * The ioctl size argument (len) is the size of the buffer, which 161 * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is 162 * too small to fit all available slots, the first num_slots are 163 * returned. 164 * 165 * Before the call, code is set to the wanted ABS_MT event type. On 166 * return, values[] is filled with the slot values for the specified 167 * ABS_MT code. 168 * 169 * If the request code is not an ABS_MT value, -EINVAL is returned. 170 */ 171 #define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) 172 173 #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ 174 #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ 175 #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ 176 #define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ 177 178 #define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ 179 #define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ 180 #define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ 181 182 #define EVIOCSFF _IOW('E', 0x80, struct ff_effect) /* send a force effect to a force feedback device */ 183 #define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ 184 #define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ 185 186 #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ 187 #define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */ 188 189 /** 190 * EVIOCGMASK - Retrieve current event mask 191 * 192 * This ioctl allows user to retrieve the current event mask for specific 193 * event type. The argument must be of type "struct input_mask" and 194 * specifies the event type to query, the address of the receive buffer and 195 * the size of the receive buffer. 196 * 197 * The event mask is a per-client mask that specifies which events are 198 * forwarded to the client. Each event code is represented by a single bit 199 * in the event mask. If the bit is set, the event is passed to the client 200 * normally. Otherwise, the event is filtered and will never be queued on 201 * the client's receive buffer. 202 * 203 * Event masks do not affect global state of the input device. They only 204 * affect the file descriptor they are applied to. 205 * 206 * The default event mask for a client has all bits set, i.e. all events 207 * are forwarded to the client. If the kernel is queried for an unknown 208 * event type or if the receive buffer is larger than the number of 209 * event codes known to the kernel, the kernel returns all zeroes for those 210 * codes. 211 * 212 * At maximum, codes_size bytes are copied. 213 * 214 * This ioctl may fail with ENODEV in case the file is revoked, EFAULT 215 * if the receive-buffer points to invalid memory, or EINVAL if the kernel 216 * does not implement the ioctl. 217 */ 218 #define EVIOCGMASK _IOR('E', 0x92, struct input_mask) /* Get event-masks */ 219 220 /** 221 * EVIOCSMASK - Set event mask 222 * 223 * This ioctl is the counterpart to EVIOCGMASK. Instead of receiving the 224 * current event mask, this changes the client's event mask for a specific 225 * type. See EVIOCGMASK for a description of event-masks and the 226 * argument-type. 227 * 228 * This ioctl provides full forward compatibility. If the passed event type 229 * is unknown to the kernel, or if the number of event codes specified in 230 * the mask is bigger than what is known to the kernel, the ioctl is still 231 * accepted and applied. However, any unknown codes are left untouched and 232 * stay cleared. That means, the kernel always filters unknown codes 233 * regardless of what the client requests. If the new mask doesn't cover 234 * all known event-codes, all remaining codes are automatically cleared and 235 * thus filtered. 236 * 237 * This ioctl may fail with ENODEV in case the file is revoked. EFAULT is 238 * returned if the receive-buffer points to invalid memory. EINVAL is returned 239 * if the kernel does not implement the ioctl. 240 */ 241 #define EVIOCSMASK _IOW('E', 0x93, struct input_mask) /* Set event-masks */ 242 243 #define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ 244 245 /* 246 * IDs. 247 */ 248 249 #define ID_BUS 0 250 #define ID_VENDOR 1 251 #define ID_PRODUCT 2 252 #define ID_VERSION 3 253 254 #define BUS_PCI 0x01 255 #define BUS_ISAPNP 0x02 256 #define BUS_USB 0x03 257 #define BUS_HIL 0x04 258 #define BUS_BLUETOOTH 0x05 259 #define BUS_VIRTUAL 0x06 260 261 #define BUS_ISA 0x10 262 #define BUS_I8042 0x11 263 #define BUS_XTKBD 0x12 264 #define BUS_RS232 0x13 265 #define BUS_GAMEPORT 0x14 266 #define BUS_PARPORT 0x15 267 #define BUS_AMIGA 0x16 268 #define BUS_ADB 0x17 269 #define BUS_I2C 0x18 270 #define BUS_HOST 0x19 271 #define BUS_GSC 0x1A 272 #define BUS_ATARI 0x1B 273 #define BUS_SPI 0x1C 274 #define BUS_RMI 0x1D 275 #define BUS_CEC 0x1E 276 #define BUS_INTEL_ISHTP 0x1F 277 #define BUS_AMD_SFH 0x20 278 279 /* 280 * MT_TOOL types 281 */ 282 #define MT_TOOL_FINGER 0x00 283 #define MT_TOOL_PEN 0x01 284 #define MT_TOOL_PALM 0x02 285 #define MT_TOOL_DIAL 0x0a 286 #define MT_TOOL_MAX 0x0f 287 288 /* 289 * Values describing the status of a force-feedback effect 290 */ 291 #define FF_STATUS_STOPPED 0x00 292 #define FF_STATUS_PLAYING 0x01 293 #define FF_STATUS_MAX 0x01 294 295 /* 296 * Structures used in ioctls to upload effects to a device 297 * They are pieces of a bigger structure (called ff_effect) 298 */ 299 300 /* 301 * All duration values are expressed in ms. Values above 32767 ms (0x7fff) 302 * should not be used and have unspecified results. 303 */ 304 305 /** 306 * struct ff_replay - defines scheduling of the force-feedback effect 307 * @length: duration of the effect 308 * @delay: delay before effect should start playing 309 */ 310 struct ff_replay { 311 __u16 length; 312 __u16 delay; 313 }; 314 315 /** 316 * struct ff_trigger - defines what triggers the force-feedback effect 317 * @button: number of the button triggering the effect 318 * @interval: controls how soon the effect can be re-triggered 319 */ 320 struct ff_trigger { 321 __u16 button; 322 __u16 interval; 323 }; 324 325 /** 326 * struct ff_envelope - generic force-feedback effect envelope 327 * @attack_length: duration of the attack (ms) 328 * @attack_level: level at the beginning of the attack 329 * @fade_length: duration of fade (ms) 330 * @fade_level: level at the end of fade 331 * 332 * The @attack_level and @fade_level are absolute values; when applying 333 * envelope force-feedback core will convert to positive/negative 334 * value based on polarity of the default level of the effect. 335 * Valid range for the attack and fade levels is 0x0000 - 0x7fff 336 */ 337 struct ff_envelope { 338 __u16 attack_length; 339 __u16 attack_level; 340 __u16 fade_length; 341 __u16 fade_level; 342 }; 343 344 /** 345 * struct ff_constant_effect - defines parameters of a constant force-feedback effect 346 * @level: strength of the effect; may be negative 347 * @envelope: envelope data 348 */ 349 struct ff_constant_effect { 350 __s16 level; 351 struct ff_envelope envelope; 352 }; 353 354 /** 355 * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect 356 * @start_level: beginning strength of the effect; may be negative 357 * @end_level: final strength of the effect; may be negative 358 * @envelope: envelope data 359 */ 360 struct ff_ramp_effect { 361 __s16 start_level; 362 __s16 end_level; 363 struct ff_envelope envelope; 364 }; 365 366 /** 367 * struct ff_condition_effect - defines a spring or friction force-feedback effect 368 * @right_saturation: maximum level when joystick moved all way to the right 369 * @left_saturation: same for the left side 370 * @right_coeff: controls how fast the force grows when the joystick moves 371 * to the right 372 * @left_coeff: same for the left side 373 * @deadband: size of the dead zone, where no force is produced 374 * @center: position of the dead zone 375 */ 376 struct ff_condition_effect { 377 __u16 right_saturation; 378 __u16 left_saturation; 379 380 __s16 right_coeff; 381 __s16 left_coeff; 382 383 __u16 deadband; 384 __s16 center; 385 }; 386 387 /** 388 * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect 389 * @waveform: kind of the effect (wave) 390 * @period: period of the wave (ms) 391 * @magnitude: peak value 392 * @offset: mean value of the wave (roughly) 393 * @phase: 'horizontal' shift 394 * @envelope: envelope data 395 * @custom_len: number of samples (FF_CUSTOM only) 396 * @custom_data: buffer of samples (FF_CUSTOM only) 397 * 398 * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, 399 * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined 400 * for the time being as no driver supports it yet. 401 * 402 * Note: the data pointed by custom_data is copied by the driver. 403 * You can therefore dispose of the memory after the upload/update. 404 */ 405 struct ff_periodic_effect { 406 __u16 waveform; 407 __u16 period; 408 __s16 magnitude; 409 __s16 offset; 410 __u16 phase; 411 412 struct ff_envelope envelope; 413 414 __u32 custom_len; 415 __s16 __user *custom_data; 416 }; 417 418 /** 419 * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect 420 * @strong_magnitude: magnitude of the heavy motor 421 * @weak_magnitude: magnitude of the light one 422 * 423 * Some rumble pads have two motors of different weight. Strong_magnitude 424 * represents the magnitude of the vibration generated by the heavy one. 425 */ 426 struct ff_rumble_effect { 427 __u16 strong_magnitude; 428 __u16 weak_magnitude; 429 }; 430 431 /** 432 * struct ff_effect - defines force feedback effect 433 * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, 434 * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) 435 * @id: an unique id assigned to an effect 436 * @direction: direction of the effect 437 * @trigger: trigger conditions (struct ff_trigger) 438 * @replay: scheduling of the effect (struct ff_replay) 439 * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, 440 * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further 441 * defining effect parameters 442 * 443 * This structure is sent through ioctl from the application to the driver. 444 * To create a new effect application should set its @id to -1; the kernel 445 * will return assigned @id which can later be used to update or delete 446 * this effect. 447 * 448 * Direction of the effect is encoded as follows: 449 * 0 deg -> 0x0000 (down) 450 * 90 deg -> 0x4000 (left) 451 * 180 deg -> 0x8000 (up) 452 * 270 deg -> 0xC000 (right) 453 */ 454 struct ff_effect { 455 __u16 type; 456 __s16 id; 457 __u16 direction; 458 struct ff_trigger trigger; 459 struct ff_replay replay; 460 461 union { 462 struct ff_constant_effect constant; 463 struct ff_ramp_effect ramp; 464 struct ff_periodic_effect periodic; 465 struct ff_condition_effect condition[2]; /* One for each axis */ 466 struct ff_rumble_effect rumble; 467 } u; 468 }; 469 470 /* 471 * Force feedback effect types 472 */ 473 474 #define FF_RUMBLE 0x50 475 #define FF_PERIODIC 0x51 476 #define FF_CONSTANT 0x52 477 #define FF_SPRING 0x53 478 #define FF_FRICTION 0x54 479 #define FF_DAMPER 0x55 480 #define FF_INERTIA 0x56 481 #define FF_RAMP 0x57 482 483 #define FF_EFFECT_MIN FF_RUMBLE 484 #define FF_EFFECT_MAX FF_RAMP 485 486 /* 487 * Force feedback periodic effect types 488 */ 489 490 #define FF_SQUARE 0x58 491 #define FF_TRIANGLE 0x59 492 #define FF_SINE 0x5a 493 #define FF_SAW_UP 0x5b 494 #define FF_SAW_DOWN 0x5c 495 #define FF_CUSTOM 0x5d 496 497 #define FF_WAVEFORM_MIN FF_SQUARE 498 #define FF_WAVEFORM_MAX FF_CUSTOM 499 500 /* 501 * Set ff device properties 502 */ 503 504 #define FF_GAIN 0x60 505 #define FF_AUTOCENTER 0x61 506 507 /* 508 * ff->playback(effect_id = FF_GAIN) is the first effect_id to 509 * cause a collision with another ff method, in this case ff->set_gain(). 510 * Therefore the greatest safe value for effect_id is FF_GAIN - 1, 511 * and thus the total number of effects should never exceed FF_GAIN. 512 */ 513 #define FF_MAX_EFFECTS FF_GAIN 514 515 #define FF_MAX 0x7f 516 #define FF_CNT (FF_MAX+1) 517 518 #endif /* _UAPI_INPUT_H */ 519