1 /*
2 * StrongARM SA-1100/SA-1110 emulation
3 *
4 * Copyright (C) 2011 Dmitry Eremin-Solenikov
5 *
6 * Largely based on StrongARM emulation:
7 * Copyright (c) 2006 Openedhand Ltd.
8 * Written by Andrzej Zaborowski <balrog@zabor.org>
9 *
10 * UART code based on QEMU 16550A UART emulation
11 * Copyright (c) 2003-2004 Fabrice Bellard
12 * Copyright (c) 2008 Citrix Systems, Inc.
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License along
24 * with this program; if not, see <http://www.gnu.org/licenses/>.
25 *
26 * Contributions after 2012-01-13 are licensed under the terms of the
27 * GNU GPL, version 2 or (at your option) any later version.
28 */
29
30 #include "qemu/osdep.h"
31 #include "hw/irq.h"
32 #include "hw/qdev-properties.h"
33 #include "hw/qdev-properties-system.h"
34 #include "hw/sysbus.h"
35 #include "migration/vmstate.h"
36 #include "strongarm.h"
37 #include "qemu/error-report.h"
38 #include "hw/arm/boot.h"
39 #include "chardev/char-fe.h"
40 #include "chardev/char-serial.h"
41 #include "sysemu/sysemu.h"
42 #include "sysemu/rtc.h"
43 #include "hw/ssi/ssi.h"
44 #include "qapi/error.h"
45 #include "qemu/cutils.h"
46 #include "qemu/log.h"
47 #include "qom/object.h"
48 #include "target/arm/cpu-qom.h"
49 #include "trace.h"
50
51 /*
52 TODO
53 - Implement cp15, c14 ?
54 - Implement cp15, c15 !!! (idle used in L)
55 - Implement idle mode handling/DIM
56 - Implement sleep mode/Wake sources
57 - Implement reset control
58 - Implement memory control regs
59 - PCMCIA handling
60 - Maybe support MBGNT/MBREQ
61 - DMA channels
62 - GPCLK
63 - IrDA
64 - MCP
65 - Enhance UART with modem signals
66 */
67
68 static struct {
69 hwaddr io_base;
70 int irq;
71 } sa_serial[] = {
72 { 0x80010000, SA_PIC_UART1 },
73 { 0x80030000, SA_PIC_UART2 },
74 { 0x80050000, SA_PIC_UART3 },
75 { 0, 0 }
76 };
77
78 /* Interrupt Controller */
79
80 #define TYPE_STRONGARM_PIC "strongarm_pic"
81 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMPICState, STRONGARM_PIC)
82
83 struct StrongARMPICState {
84 SysBusDevice parent_obj;
85
86 MemoryRegion iomem;
87 qemu_irq irq;
88 qemu_irq fiq;
89
90 uint32_t pending;
91 uint32_t enabled;
92 uint32_t is_fiq;
93 uint32_t int_idle;
94 };
95
96 #define ICIP 0x00
97 #define ICMR 0x04
98 #define ICLR 0x08
99 #define ICFP 0x10
100 #define ICPR 0x20
101 #define ICCR 0x0c
102
103 #define SA_PIC_SRCS 32
104
105
strongarm_pic_update(void * opaque)106 static void strongarm_pic_update(void *opaque)
107 {
108 StrongARMPICState *s = opaque;
109
110 /* FIXME: reflect DIM */
111 qemu_set_irq(s->fiq, s->pending & s->enabled & s->is_fiq);
112 qemu_set_irq(s->irq, s->pending & s->enabled & ~s->is_fiq);
113 }
114
strongarm_pic_set_irq(void * opaque,int irq,int level)115 static void strongarm_pic_set_irq(void *opaque, int irq, int level)
116 {
117 StrongARMPICState *s = opaque;
118
119 if (level) {
120 s->pending |= 1 << irq;
121 } else {
122 s->pending &= ~(1 << irq);
123 }
124
125 strongarm_pic_update(s);
126 }
127
strongarm_pic_mem_read(void * opaque,hwaddr offset,unsigned size)128 static uint64_t strongarm_pic_mem_read(void *opaque, hwaddr offset,
129 unsigned size)
130 {
131 StrongARMPICState *s = opaque;
132
133 switch (offset) {
134 case ICIP:
135 return s->pending & ~s->is_fiq & s->enabled;
136 case ICMR:
137 return s->enabled;
138 case ICLR:
139 return s->is_fiq;
140 case ICCR:
141 return s->int_idle == 0;
142 case ICFP:
143 return s->pending & s->is_fiq & s->enabled;
144 case ICPR:
145 return s->pending;
146 default:
147 qemu_log_mask(LOG_GUEST_ERROR,
148 "%s: Bad register offset 0x"HWADDR_FMT_plx"\n",
149 __func__, offset);
150 return 0;
151 }
152 }
153
strongarm_pic_mem_write(void * opaque,hwaddr offset,uint64_t value,unsigned size)154 static void strongarm_pic_mem_write(void *opaque, hwaddr offset,
155 uint64_t value, unsigned size)
156 {
157 StrongARMPICState *s = opaque;
158
159 switch (offset) {
160 case ICMR:
161 s->enabled = value;
162 break;
163 case ICLR:
164 s->is_fiq = value;
165 break;
166 case ICCR:
167 s->int_idle = (value & 1) ? 0 : ~0;
168 break;
169 default:
170 qemu_log_mask(LOG_GUEST_ERROR,
171 "%s: Bad register offset 0x"HWADDR_FMT_plx"\n",
172 __func__, offset);
173 break;
174 }
175 strongarm_pic_update(s);
176 }
177
178 static const MemoryRegionOps strongarm_pic_ops = {
179 .read = strongarm_pic_mem_read,
180 .write = strongarm_pic_mem_write,
181 .endianness = DEVICE_NATIVE_ENDIAN,
182 };
183
strongarm_pic_initfn(Object * obj)184 static void strongarm_pic_initfn(Object *obj)
185 {
186 DeviceState *dev = DEVICE(obj);
187 StrongARMPICState *s = STRONGARM_PIC(obj);
188 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
189
190 qdev_init_gpio_in(dev, strongarm_pic_set_irq, SA_PIC_SRCS);
191 memory_region_init_io(&s->iomem, obj, &strongarm_pic_ops, s,
192 "pic", 0x1000);
193 sysbus_init_mmio(sbd, &s->iomem);
194 sysbus_init_irq(sbd, &s->irq);
195 sysbus_init_irq(sbd, &s->fiq);
196 }
197
strongarm_pic_post_load(void * opaque,int version_id)198 static int strongarm_pic_post_load(void *opaque, int version_id)
199 {
200 strongarm_pic_update(opaque);
201 return 0;
202 }
203
204 static const VMStateDescription vmstate_strongarm_pic_regs = {
205 .name = "strongarm_pic",
206 .version_id = 0,
207 .minimum_version_id = 0,
208 .post_load = strongarm_pic_post_load,
209 .fields = (const VMStateField[]) {
210 VMSTATE_UINT32(pending, StrongARMPICState),
211 VMSTATE_UINT32(enabled, StrongARMPICState),
212 VMSTATE_UINT32(is_fiq, StrongARMPICState),
213 VMSTATE_UINT32(int_idle, StrongARMPICState),
214 VMSTATE_END_OF_LIST(),
215 },
216 };
217
strongarm_pic_class_init(ObjectClass * klass,void * data)218 static void strongarm_pic_class_init(ObjectClass *klass, void *data)
219 {
220 DeviceClass *dc = DEVICE_CLASS(klass);
221
222 dc->desc = "StrongARM PIC";
223 dc->vmsd = &vmstate_strongarm_pic_regs;
224 }
225
226 static const TypeInfo strongarm_pic_info = {
227 .name = TYPE_STRONGARM_PIC,
228 .parent = TYPE_SYS_BUS_DEVICE,
229 .instance_size = sizeof(StrongARMPICState),
230 .instance_init = strongarm_pic_initfn,
231 .class_init = strongarm_pic_class_init,
232 };
233
234 /* Real-Time Clock */
235 #define RTAR 0x00 /* RTC Alarm register */
236 #define RCNR 0x04 /* RTC Counter register */
237 #define RTTR 0x08 /* RTC Timer Trim register */
238 #define RTSR 0x10 /* RTC Status register */
239
240 #define RTSR_AL (1 << 0) /* RTC Alarm detected */
241 #define RTSR_HZ (1 << 1) /* RTC 1Hz detected */
242 #define RTSR_ALE (1 << 2) /* RTC Alarm enable */
243 #define RTSR_HZE (1 << 3) /* RTC 1Hz enable */
244
245 /* 16 LSB of RTTR are clockdiv for internal trim logic,
246 * trim delete isn't emulated, so
247 * f = 32 768 / (RTTR_trim + 1) */
248
249 #define TYPE_STRONGARM_RTC "strongarm-rtc"
250 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMRTCState, STRONGARM_RTC)
251
252 struct StrongARMRTCState {
253 SysBusDevice parent_obj;
254
255 MemoryRegion iomem;
256 uint32_t rttr;
257 uint32_t rtsr;
258 uint32_t rtar;
259 uint32_t last_rcnr;
260 int64_t last_hz;
261 QEMUTimer *rtc_alarm;
262 QEMUTimer *rtc_hz;
263 qemu_irq rtc_irq;
264 qemu_irq rtc_hz_irq;
265 };
266
strongarm_rtc_int_update(StrongARMRTCState * s)267 static inline void strongarm_rtc_int_update(StrongARMRTCState *s)
268 {
269 qemu_set_irq(s->rtc_irq, s->rtsr & RTSR_AL);
270 qemu_set_irq(s->rtc_hz_irq, s->rtsr & RTSR_HZ);
271 }
272
strongarm_rtc_hzupdate(StrongARMRTCState * s)273 static void strongarm_rtc_hzupdate(StrongARMRTCState *s)
274 {
275 int64_t rt = qemu_clock_get_ms(rtc_clock);
276 s->last_rcnr += ((rt - s->last_hz) << 15) /
277 (1000 * ((s->rttr & 0xffff) + 1));
278 s->last_hz = rt;
279 }
280
strongarm_rtc_timer_update(StrongARMRTCState * s)281 static inline void strongarm_rtc_timer_update(StrongARMRTCState *s)
282 {
283 if ((s->rtsr & RTSR_HZE) && !(s->rtsr & RTSR_HZ)) {
284 timer_mod(s->rtc_hz, s->last_hz + 1000);
285 } else {
286 timer_del(s->rtc_hz);
287 }
288
289 if ((s->rtsr & RTSR_ALE) && !(s->rtsr & RTSR_AL)) {
290 timer_mod(s->rtc_alarm, s->last_hz +
291 (((s->rtar - s->last_rcnr) * 1000 *
292 ((s->rttr & 0xffff) + 1)) >> 15));
293 } else {
294 timer_del(s->rtc_alarm);
295 }
296 }
297
strongarm_rtc_alarm_tick(void * opaque)298 static inline void strongarm_rtc_alarm_tick(void *opaque)
299 {
300 StrongARMRTCState *s = opaque;
301 s->rtsr |= RTSR_AL;
302 strongarm_rtc_timer_update(s);
303 strongarm_rtc_int_update(s);
304 }
305
strongarm_rtc_hz_tick(void * opaque)306 static inline void strongarm_rtc_hz_tick(void *opaque)
307 {
308 StrongARMRTCState *s = opaque;
309 s->rtsr |= RTSR_HZ;
310 strongarm_rtc_timer_update(s);
311 strongarm_rtc_int_update(s);
312 }
313
strongarm_rtc_read(void * opaque,hwaddr addr,unsigned size)314 static uint64_t strongarm_rtc_read(void *opaque, hwaddr addr,
315 unsigned size)
316 {
317 StrongARMRTCState *s = opaque;
318
319 switch (addr) {
320 case RTTR:
321 return s->rttr;
322 case RTSR:
323 return s->rtsr;
324 case RTAR:
325 return s->rtar;
326 case RCNR:
327 return s->last_rcnr +
328 ((qemu_clock_get_ms(rtc_clock) - s->last_hz) << 15) /
329 (1000 * ((s->rttr & 0xffff) + 1));
330 default:
331 qemu_log_mask(LOG_GUEST_ERROR,
332 "%s: Bad rtc register read 0x"HWADDR_FMT_plx"\n",
333 __func__, addr);
334 return 0;
335 }
336 }
337
strongarm_rtc_write(void * opaque,hwaddr addr,uint64_t value,unsigned size)338 static void strongarm_rtc_write(void *opaque, hwaddr addr,
339 uint64_t value, unsigned size)
340 {
341 StrongARMRTCState *s = opaque;
342 uint32_t old_rtsr;
343
344 switch (addr) {
345 case RTTR:
346 strongarm_rtc_hzupdate(s);
347 s->rttr = value;
348 strongarm_rtc_timer_update(s);
349 break;
350
351 case RTSR:
352 old_rtsr = s->rtsr;
353 s->rtsr = (value & (RTSR_ALE | RTSR_HZE)) |
354 (s->rtsr & ~(value & (RTSR_AL | RTSR_HZ)));
355
356 if (s->rtsr != old_rtsr) {
357 strongarm_rtc_timer_update(s);
358 }
359
360 strongarm_rtc_int_update(s);
361 break;
362
363 case RTAR:
364 s->rtar = value;
365 strongarm_rtc_timer_update(s);
366 break;
367
368 case RCNR:
369 strongarm_rtc_hzupdate(s);
370 s->last_rcnr = value;
371 strongarm_rtc_timer_update(s);
372 break;
373
374 default:
375 qemu_log_mask(LOG_GUEST_ERROR,
376 "%s: Bad rtc register write 0x"HWADDR_FMT_plx"\n",
377 __func__, addr);
378 }
379 }
380
381 static const MemoryRegionOps strongarm_rtc_ops = {
382 .read = strongarm_rtc_read,
383 .write = strongarm_rtc_write,
384 .endianness = DEVICE_NATIVE_ENDIAN,
385 };
386
strongarm_rtc_init(Object * obj)387 static void strongarm_rtc_init(Object *obj)
388 {
389 StrongARMRTCState *s = STRONGARM_RTC(obj);
390 SysBusDevice *dev = SYS_BUS_DEVICE(obj);
391 struct tm tm;
392
393 s->rttr = 0x0;
394 s->rtsr = 0;
395
396 qemu_get_timedate(&tm, 0);
397
398 s->last_rcnr = (uint32_t) mktimegm(&tm);
399 s->last_hz = qemu_clock_get_ms(rtc_clock);
400
401 sysbus_init_irq(dev, &s->rtc_irq);
402 sysbus_init_irq(dev, &s->rtc_hz_irq);
403
404 memory_region_init_io(&s->iomem, obj, &strongarm_rtc_ops, s,
405 "rtc", 0x10000);
406 sysbus_init_mmio(dev, &s->iomem);
407 }
408
strongarm_rtc_realize(DeviceState * dev,Error ** errp)409 static void strongarm_rtc_realize(DeviceState *dev, Error **errp)
410 {
411 StrongARMRTCState *s = STRONGARM_RTC(dev);
412 s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s);
413 s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s);
414 }
415
strongarm_rtc_pre_save(void * opaque)416 static int strongarm_rtc_pre_save(void *opaque)
417 {
418 StrongARMRTCState *s = opaque;
419
420 strongarm_rtc_hzupdate(s);
421
422 return 0;
423 }
424
strongarm_rtc_post_load(void * opaque,int version_id)425 static int strongarm_rtc_post_load(void *opaque, int version_id)
426 {
427 StrongARMRTCState *s = opaque;
428
429 strongarm_rtc_timer_update(s);
430 strongarm_rtc_int_update(s);
431
432 return 0;
433 }
434
435 static const VMStateDescription vmstate_strongarm_rtc_regs = {
436 .name = "strongarm-rtc",
437 .version_id = 0,
438 .minimum_version_id = 0,
439 .pre_save = strongarm_rtc_pre_save,
440 .post_load = strongarm_rtc_post_load,
441 .fields = (const VMStateField[]) {
442 VMSTATE_UINT32(rttr, StrongARMRTCState),
443 VMSTATE_UINT32(rtsr, StrongARMRTCState),
444 VMSTATE_UINT32(rtar, StrongARMRTCState),
445 VMSTATE_UINT32(last_rcnr, StrongARMRTCState),
446 VMSTATE_INT64(last_hz, StrongARMRTCState),
447 VMSTATE_END_OF_LIST(),
448 },
449 };
450
strongarm_rtc_sysbus_class_init(ObjectClass * klass,void * data)451 static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data)
452 {
453 DeviceClass *dc = DEVICE_CLASS(klass);
454
455 dc->desc = "StrongARM RTC Controller";
456 dc->vmsd = &vmstate_strongarm_rtc_regs;
457 dc->realize = strongarm_rtc_realize;
458 }
459
460 static const TypeInfo strongarm_rtc_sysbus_info = {
461 .name = TYPE_STRONGARM_RTC,
462 .parent = TYPE_SYS_BUS_DEVICE,
463 .instance_size = sizeof(StrongARMRTCState),
464 .instance_init = strongarm_rtc_init,
465 .class_init = strongarm_rtc_sysbus_class_init,
466 };
467
468 /* GPIO */
469 #define GPLR 0x00
470 #define GPDR 0x04
471 #define GPSR 0x08
472 #define GPCR 0x0c
473 #define GRER 0x10
474 #define GFER 0x14
475 #define GEDR 0x18
476 #define GAFR 0x1c
477
478 #define TYPE_STRONGARM_GPIO "strongarm-gpio"
479 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMGPIOInfo, STRONGARM_GPIO)
480
481 struct StrongARMGPIOInfo {
482 SysBusDevice busdev;
483 MemoryRegion iomem;
484 qemu_irq handler[28];
485 qemu_irq irqs[11];
486 qemu_irq irqX;
487
488 uint32_t ilevel;
489 uint32_t olevel;
490 uint32_t dir;
491 uint32_t rising;
492 uint32_t falling;
493 uint32_t status;
494 uint32_t gafr;
495
496 uint32_t prev_level;
497 };
498
499
strongarm_gpio_irq_update(StrongARMGPIOInfo * s)500 static void strongarm_gpio_irq_update(StrongARMGPIOInfo *s)
501 {
502 int i;
503 for (i = 0; i < 11; i++) {
504 qemu_set_irq(s->irqs[i], s->status & (1 << i));
505 }
506
507 qemu_set_irq(s->irqX, (s->status & ~0x7ff));
508 }
509
strongarm_gpio_set(void * opaque,int line,int level)510 static void strongarm_gpio_set(void *opaque, int line, int level)
511 {
512 StrongARMGPIOInfo *s = opaque;
513 uint32_t mask;
514
515 mask = 1 << line;
516
517 if (level) {
518 s->status |= s->rising & mask &
519 ~s->ilevel & ~s->dir;
520 s->ilevel |= mask;
521 } else {
522 s->status |= s->falling & mask &
523 s->ilevel & ~s->dir;
524 s->ilevel &= ~mask;
525 }
526
527 if (s->status & mask) {
528 strongarm_gpio_irq_update(s);
529 }
530 }
531
strongarm_gpio_handler_update(StrongARMGPIOInfo * s)532 static void strongarm_gpio_handler_update(StrongARMGPIOInfo *s)
533 {
534 uint32_t level, diff;
535 int bit;
536
537 level = s->olevel & s->dir;
538
539 for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
540 bit = ctz32(diff);
541 qemu_set_irq(s->handler[bit], (level >> bit) & 1);
542 }
543
544 s->prev_level = level;
545 }
546
strongarm_gpio_read(void * opaque,hwaddr offset,unsigned size)547 static uint64_t strongarm_gpio_read(void *opaque, hwaddr offset,
548 unsigned size)
549 {
550 StrongARMGPIOInfo *s = opaque;
551
552 switch (offset) {
553 case GPDR: /* GPIO Pin-Direction registers */
554 return s->dir;
555
556 case GPSR: /* GPIO Pin-Output Set registers */
557 qemu_log_mask(LOG_GUEST_ERROR,
558 "%s: read from write only register GPSR\n", __func__);
559 return 0;
560
561 case GPCR: /* GPIO Pin-Output Clear registers */
562 qemu_log_mask(LOG_GUEST_ERROR,
563 "%s: read from write only register GPCR\n", __func__);
564 return 0;
565
566 case GRER: /* GPIO Rising-Edge Detect Enable registers */
567 return s->rising;
568
569 case GFER: /* GPIO Falling-Edge Detect Enable registers */
570 return s->falling;
571
572 case GAFR: /* GPIO Alternate Function registers */
573 return s->gafr;
574
575 case GPLR: /* GPIO Pin-Level registers */
576 return (s->olevel & s->dir) |
577 (s->ilevel & ~s->dir);
578
579 case GEDR: /* GPIO Edge Detect Status registers */
580 return s->status;
581
582 default:
583 qemu_log_mask(LOG_GUEST_ERROR,
584 "%s: Bad gpio read offset 0x"HWADDR_FMT_plx"\n",
585 __func__, offset);
586 }
587
588 return 0;
589 }
590
strongarm_gpio_write(void * opaque,hwaddr offset,uint64_t value,unsigned size)591 static void strongarm_gpio_write(void *opaque, hwaddr offset,
592 uint64_t value, unsigned size)
593 {
594 StrongARMGPIOInfo *s = opaque;
595
596 switch (offset) {
597 case GPDR: /* GPIO Pin-Direction registers */
598 s->dir = value & 0x0fffffff;
599 strongarm_gpio_handler_update(s);
600 break;
601
602 case GPSR: /* GPIO Pin-Output Set registers */
603 s->olevel |= value & 0x0fffffff;
604 strongarm_gpio_handler_update(s);
605 break;
606
607 case GPCR: /* GPIO Pin-Output Clear registers */
608 s->olevel &= ~value;
609 strongarm_gpio_handler_update(s);
610 break;
611
612 case GRER: /* GPIO Rising-Edge Detect Enable registers */
613 s->rising = value;
614 break;
615
616 case GFER: /* GPIO Falling-Edge Detect Enable registers */
617 s->falling = value;
618 break;
619
620 case GAFR: /* GPIO Alternate Function registers */
621 s->gafr = value;
622 break;
623
624 case GEDR: /* GPIO Edge Detect Status registers */
625 s->status &= ~value;
626 strongarm_gpio_irq_update(s);
627 break;
628
629 default:
630 qemu_log_mask(LOG_GUEST_ERROR,
631 "%s: Bad write offset 0x"HWADDR_FMT_plx"\n",
632 __func__, offset);
633 }
634 }
635
636 static const MemoryRegionOps strongarm_gpio_ops = {
637 .read = strongarm_gpio_read,
638 .write = strongarm_gpio_write,
639 .endianness = DEVICE_NATIVE_ENDIAN,
640 };
641
strongarm_gpio_init(hwaddr base,DeviceState * pic)642 static DeviceState *strongarm_gpio_init(hwaddr base,
643 DeviceState *pic)
644 {
645 DeviceState *dev;
646 int i;
647
648 dev = qdev_new(TYPE_STRONGARM_GPIO);
649 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
650
651 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
652 for (i = 0; i < 12; i++)
653 sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
654 qdev_get_gpio_in(pic, SA_PIC_GPIO0_EDGE + i));
655
656 return dev;
657 }
658
strongarm_gpio_initfn(Object * obj)659 static void strongarm_gpio_initfn(Object *obj)
660 {
661 DeviceState *dev = DEVICE(obj);
662 StrongARMGPIOInfo *s = STRONGARM_GPIO(obj);
663 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
664 int i;
665
666 qdev_init_gpio_in(dev, strongarm_gpio_set, 28);
667 qdev_init_gpio_out(dev, s->handler, 28);
668
669 memory_region_init_io(&s->iomem, obj, &strongarm_gpio_ops, s,
670 "gpio", 0x1000);
671
672 sysbus_init_mmio(sbd, &s->iomem);
673 for (i = 0; i < 11; i++) {
674 sysbus_init_irq(sbd, &s->irqs[i]);
675 }
676 sysbus_init_irq(sbd, &s->irqX);
677 }
678
679 static const VMStateDescription vmstate_strongarm_gpio_regs = {
680 .name = "strongarm-gpio",
681 .version_id = 0,
682 .minimum_version_id = 0,
683 .fields = (const VMStateField[]) {
684 VMSTATE_UINT32(ilevel, StrongARMGPIOInfo),
685 VMSTATE_UINT32(olevel, StrongARMGPIOInfo),
686 VMSTATE_UINT32(dir, StrongARMGPIOInfo),
687 VMSTATE_UINT32(rising, StrongARMGPIOInfo),
688 VMSTATE_UINT32(falling, StrongARMGPIOInfo),
689 VMSTATE_UINT32(status, StrongARMGPIOInfo),
690 VMSTATE_UINT32(gafr, StrongARMGPIOInfo),
691 VMSTATE_UINT32(prev_level, StrongARMGPIOInfo),
692 VMSTATE_END_OF_LIST(),
693 },
694 };
695
strongarm_gpio_class_init(ObjectClass * klass,void * data)696 static void strongarm_gpio_class_init(ObjectClass *klass, void *data)
697 {
698 DeviceClass *dc = DEVICE_CLASS(klass);
699
700 dc->desc = "StrongARM GPIO controller";
701 dc->vmsd = &vmstate_strongarm_gpio_regs;
702 }
703
704 static const TypeInfo strongarm_gpio_info = {
705 .name = TYPE_STRONGARM_GPIO,
706 .parent = TYPE_SYS_BUS_DEVICE,
707 .instance_size = sizeof(StrongARMGPIOInfo),
708 .instance_init = strongarm_gpio_initfn,
709 .class_init = strongarm_gpio_class_init,
710 };
711
712 /* Peripheral Pin Controller */
713 #define PPDR 0x00
714 #define PPSR 0x04
715 #define PPAR 0x08
716 #define PSDR 0x0c
717 #define PPFR 0x10
718
719 #define TYPE_STRONGARM_PPC "strongarm-ppc"
720 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMPPCInfo, STRONGARM_PPC)
721
722 struct StrongARMPPCInfo {
723 SysBusDevice parent_obj;
724
725 MemoryRegion iomem;
726 qemu_irq handler[28];
727
728 uint32_t ilevel;
729 uint32_t olevel;
730 uint32_t dir;
731 uint32_t ppar;
732 uint32_t psdr;
733 uint32_t ppfr;
734
735 uint32_t prev_level;
736 };
737
strongarm_ppc_set(void * opaque,int line,int level)738 static void strongarm_ppc_set(void *opaque, int line, int level)
739 {
740 StrongARMPPCInfo *s = opaque;
741
742 if (level) {
743 s->ilevel |= 1 << line;
744 } else {
745 s->ilevel &= ~(1 << line);
746 }
747 }
748
strongarm_ppc_handler_update(StrongARMPPCInfo * s)749 static void strongarm_ppc_handler_update(StrongARMPPCInfo *s)
750 {
751 uint32_t level, diff;
752 int bit;
753
754 level = s->olevel & s->dir;
755
756 for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
757 bit = ctz32(diff);
758 qemu_set_irq(s->handler[bit], (level >> bit) & 1);
759 }
760
761 s->prev_level = level;
762 }
763
strongarm_ppc_read(void * opaque,hwaddr offset,unsigned size)764 static uint64_t strongarm_ppc_read(void *opaque, hwaddr offset,
765 unsigned size)
766 {
767 StrongARMPPCInfo *s = opaque;
768
769 switch (offset) {
770 case PPDR: /* PPC Pin Direction registers */
771 return s->dir | ~0x3fffff;
772
773 case PPSR: /* PPC Pin State registers */
774 return (s->olevel & s->dir) |
775 (s->ilevel & ~s->dir) |
776 ~0x3fffff;
777
778 case PPAR:
779 return s->ppar | ~0x41000;
780
781 case PSDR:
782 return s->psdr;
783
784 case PPFR:
785 return s->ppfr | ~0x7f001;
786
787 default:
788 qemu_log_mask(LOG_GUEST_ERROR,
789 "%s: Bad ppc read offset 0x"HWADDR_FMT_plx "\n",
790 __func__, offset);
791 }
792
793 return 0;
794 }
795
strongarm_ppc_write(void * opaque,hwaddr offset,uint64_t value,unsigned size)796 static void strongarm_ppc_write(void *opaque, hwaddr offset,
797 uint64_t value, unsigned size)
798 {
799 StrongARMPPCInfo *s = opaque;
800
801 switch (offset) {
802 case PPDR: /* PPC Pin Direction registers */
803 s->dir = value & 0x3fffff;
804 strongarm_ppc_handler_update(s);
805 break;
806
807 case PPSR: /* PPC Pin State registers */
808 s->olevel = value & s->dir & 0x3fffff;
809 strongarm_ppc_handler_update(s);
810 break;
811
812 case PPAR:
813 s->ppar = value & 0x41000;
814 break;
815
816 case PSDR:
817 s->psdr = value & 0x3fffff;
818 break;
819
820 case PPFR:
821 s->ppfr = value & 0x7f001;
822 break;
823
824 default:
825 qemu_log_mask(LOG_GUEST_ERROR,
826 "%s: Bad ppc write offset 0x"HWADDR_FMT_plx"\n",
827 __func__, offset);
828 }
829 }
830
831 static const MemoryRegionOps strongarm_ppc_ops = {
832 .read = strongarm_ppc_read,
833 .write = strongarm_ppc_write,
834 .endianness = DEVICE_NATIVE_ENDIAN,
835 };
836
strongarm_ppc_init(Object * obj)837 static void strongarm_ppc_init(Object *obj)
838 {
839 DeviceState *dev = DEVICE(obj);
840 StrongARMPPCInfo *s = STRONGARM_PPC(obj);
841 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
842
843 qdev_init_gpio_in(dev, strongarm_ppc_set, 22);
844 qdev_init_gpio_out(dev, s->handler, 22);
845
846 memory_region_init_io(&s->iomem, obj, &strongarm_ppc_ops, s,
847 "ppc", 0x1000);
848
849 sysbus_init_mmio(sbd, &s->iomem);
850 }
851
852 static const VMStateDescription vmstate_strongarm_ppc_regs = {
853 .name = "strongarm-ppc",
854 .version_id = 0,
855 .minimum_version_id = 0,
856 .fields = (const VMStateField[]) {
857 VMSTATE_UINT32(ilevel, StrongARMPPCInfo),
858 VMSTATE_UINT32(olevel, StrongARMPPCInfo),
859 VMSTATE_UINT32(dir, StrongARMPPCInfo),
860 VMSTATE_UINT32(ppar, StrongARMPPCInfo),
861 VMSTATE_UINT32(psdr, StrongARMPPCInfo),
862 VMSTATE_UINT32(ppfr, StrongARMPPCInfo),
863 VMSTATE_UINT32(prev_level, StrongARMPPCInfo),
864 VMSTATE_END_OF_LIST(),
865 },
866 };
867
strongarm_ppc_class_init(ObjectClass * klass,void * data)868 static void strongarm_ppc_class_init(ObjectClass *klass, void *data)
869 {
870 DeviceClass *dc = DEVICE_CLASS(klass);
871
872 dc->desc = "StrongARM PPC controller";
873 dc->vmsd = &vmstate_strongarm_ppc_regs;
874 }
875
876 static const TypeInfo strongarm_ppc_info = {
877 .name = TYPE_STRONGARM_PPC,
878 .parent = TYPE_SYS_BUS_DEVICE,
879 .instance_size = sizeof(StrongARMPPCInfo),
880 .instance_init = strongarm_ppc_init,
881 .class_init = strongarm_ppc_class_init,
882 };
883
884 /* UART Ports */
885 #define UTCR0 0x00
886 #define UTCR1 0x04
887 #define UTCR2 0x08
888 #define UTCR3 0x0c
889 #define UTDR 0x14
890 #define UTSR0 0x1c
891 #define UTSR1 0x20
892
893 #define UTCR0_PE (1 << 0) /* Parity enable */
894 #define UTCR0_OES (1 << 1) /* Even parity */
895 #define UTCR0_SBS (1 << 2) /* 2 stop bits */
896 #define UTCR0_DSS (1 << 3) /* 8-bit data */
897
898 #define UTCR3_RXE (1 << 0) /* Rx enable */
899 #define UTCR3_TXE (1 << 1) /* Tx enable */
900 #define UTCR3_BRK (1 << 2) /* Force Break */
901 #define UTCR3_RIE (1 << 3) /* Rx int enable */
902 #define UTCR3_TIE (1 << 4) /* Tx int enable */
903 #define UTCR3_LBM (1 << 5) /* Loopback */
904
905 #define UTSR0_TFS (1 << 0) /* Tx FIFO nearly empty */
906 #define UTSR0_RFS (1 << 1) /* Rx FIFO nearly full */
907 #define UTSR0_RID (1 << 2) /* Receiver Idle */
908 #define UTSR0_RBB (1 << 3) /* Receiver begin break */
909 #define UTSR0_REB (1 << 4) /* Receiver end break */
910 #define UTSR0_EIF (1 << 5) /* Error in FIFO */
911
912 #define UTSR1_RNE (1 << 1) /* Receive FIFO not empty */
913 #define UTSR1_TNF (1 << 2) /* Transmit FIFO not full */
914 #define UTSR1_PRE (1 << 3) /* Parity error */
915 #define UTSR1_FRE (1 << 4) /* Frame error */
916 #define UTSR1_ROR (1 << 5) /* Receive Over Run */
917
918 #define RX_FIFO_PRE (1 << 8)
919 #define RX_FIFO_FRE (1 << 9)
920 #define RX_FIFO_ROR (1 << 10)
921
922 #define TYPE_STRONGARM_UART "strongarm-uart"
923 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMUARTState, STRONGARM_UART)
924
925 struct StrongARMUARTState {
926 SysBusDevice parent_obj;
927
928 MemoryRegion iomem;
929 CharBackend chr;
930 qemu_irq irq;
931
932 uint8_t utcr0;
933 uint16_t brd;
934 uint8_t utcr3;
935 uint8_t utsr0;
936 uint8_t utsr1;
937
938 uint8_t tx_fifo[8];
939 uint8_t tx_start;
940 uint8_t tx_len;
941 uint16_t rx_fifo[12]; /* value + error flags in high bits */
942 uint8_t rx_start;
943 uint8_t rx_len;
944
945 uint64_t char_transmit_time; /* time to transmit a char in nanoseconds */
946 bool wait_break_end;
947 QEMUTimer *rx_timeout_timer;
948 QEMUTimer *tx_timer;
949 };
950
strongarm_uart_update_status(StrongARMUARTState * s)951 static void strongarm_uart_update_status(StrongARMUARTState *s)
952 {
953 uint16_t utsr1 = 0;
954
955 if (s->tx_len != 8) {
956 utsr1 |= UTSR1_TNF;
957 }
958
959 if (s->rx_len != 0) {
960 uint16_t ent = s->rx_fifo[s->rx_start];
961
962 utsr1 |= UTSR1_RNE;
963 if (ent & RX_FIFO_PRE) {
964 s->utsr1 |= UTSR1_PRE;
965 }
966 if (ent & RX_FIFO_FRE) {
967 s->utsr1 |= UTSR1_FRE;
968 }
969 if (ent & RX_FIFO_ROR) {
970 s->utsr1 |= UTSR1_ROR;
971 }
972 }
973
974 s->utsr1 = utsr1;
975 }
976
strongarm_uart_update_int_status(StrongARMUARTState * s)977 static void strongarm_uart_update_int_status(StrongARMUARTState *s)
978 {
979 uint16_t utsr0 = s->utsr0 &
980 (UTSR0_REB | UTSR0_RBB | UTSR0_RID);
981 int i;
982
983 if ((s->utcr3 & UTCR3_TXE) &&
984 (s->utcr3 & UTCR3_TIE) &&
985 s->tx_len <= 4) {
986 utsr0 |= UTSR0_TFS;
987 }
988
989 if ((s->utcr3 & UTCR3_RXE) &&
990 (s->utcr3 & UTCR3_RIE) &&
991 s->rx_len > 4) {
992 utsr0 |= UTSR0_RFS;
993 }
994
995 for (i = 0; i < s->rx_len && i < 4; i++)
996 if (s->rx_fifo[(s->rx_start + i) % 12] & ~0xff) {
997 utsr0 |= UTSR0_EIF;
998 break;
999 }
1000
1001 s->utsr0 = utsr0;
1002 qemu_set_irq(s->irq, utsr0);
1003 }
1004
strongarm_uart_update_parameters(StrongARMUARTState * s)1005 static void strongarm_uart_update_parameters(StrongARMUARTState *s)
1006 {
1007 int speed, parity, data_bits, stop_bits, frame_size;
1008 QEMUSerialSetParams ssp;
1009
1010 /* Start bit. */
1011 frame_size = 1;
1012 if (s->utcr0 & UTCR0_PE) {
1013 /* Parity bit. */
1014 frame_size++;
1015 if (s->utcr0 & UTCR0_OES) {
1016 parity = 'E';
1017 } else {
1018 parity = 'O';
1019 }
1020 } else {
1021 parity = 'N';
1022 }
1023 if (s->utcr0 & UTCR0_SBS) {
1024 stop_bits = 2;
1025 } else {
1026 stop_bits = 1;
1027 }
1028
1029 data_bits = (s->utcr0 & UTCR0_DSS) ? 8 : 7;
1030 frame_size += data_bits + stop_bits;
1031 speed = 3686400 / 16 / (s->brd + 1);
1032 ssp.speed = speed;
1033 ssp.parity = parity;
1034 ssp.data_bits = data_bits;
1035 ssp.stop_bits = stop_bits;
1036 s->char_transmit_time = (NANOSECONDS_PER_SECOND / speed) * frame_size;
1037 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
1038
1039 trace_strongarm_uart_update_parameters((s->chr.chr ?
1040 s->chr.chr->label : "NULL") ?:
1041 "NULL",
1042 speed,
1043 parity,
1044 data_bits,
1045 stop_bits);
1046 }
1047
strongarm_uart_rx_to(void * opaque)1048 static void strongarm_uart_rx_to(void *opaque)
1049 {
1050 StrongARMUARTState *s = opaque;
1051
1052 if (s->rx_len) {
1053 s->utsr0 |= UTSR0_RID;
1054 strongarm_uart_update_int_status(s);
1055 }
1056 }
1057
strongarm_uart_rx_push(StrongARMUARTState * s,uint16_t c)1058 static void strongarm_uart_rx_push(StrongARMUARTState *s, uint16_t c)
1059 {
1060 if ((s->utcr3 & UTCR3_RXE) == 0) {
1061 /* rx disabled */
1062 return;
1063 }
1064
1065 if (s->wait_break_end) {
1066 s->utsr0 |= UTSR0_REB;
1067 s->wait_break_end = false;
1068 }
1069
1070 if (s->rx_len < 12) {
1071 s->rx_fifo[(s->rx_start + s->rx_len) % 12] = c;
1072 s->rx_len++;
1073 } else
1074 s->rx_fifo[(s->rx_start + 11) % 12] |= RX_FIFO_ROR;
1075 }
1076
strongarm_uart_can_receive(void * opaque)1077 static int strongarm_uart_can_receive(void *opaque)
1078 {
1079 StrongARMUARTState *s = opaque;
1080
1081 if (s->rx_len == 12) {
1082 return 0;
1083 }
1084 /* It's best not to get more than 2/3 of RX FIFO, so advertise that much */
1085 if (s->rx_len < 8) {
1086 return 8 - s->rx_len;
1087 }
1088 return 1;
1089 }
1090
strongarm_uart_receive(void * opaque,const uint8_t * buf,int size)1091 static void strongarm_uart_receive(void *opaque, const uint8_t *buf, int size)
1092 {
1093 StrongARMUARTState *s = opaque;
1094 int i;
1095
1096 for (i = 0; i < size; i++) {
1097 strongarm_uart_rx_push(s, buf[i]);
1098 }
1099
1100 /* call the timeout receive callback in 3 char transmit time */
1101 timer_mod(s->rx_timeout_timer,
1102 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1103
1104 strongarm_uart_update_status(s);
1105 strongarm_uart_update_int_status(s);
1106 }
1107
strongarm_uart_event(void * opaque,QEMUChrEvent event)1108 static void strongarm_uart_event(void *opaque, QEMUChrEvent event)
1109 {
1110 StrongARMUARTState *s = opaque;
1111 if (event == CHR_EVENT_BREAK) {
1112 s->utsr0 |= UTSR0_RBB;
1113 strongarm_uart_rx_push(s, RX_FIFO_FRE);
1114 s->wait_break_end = true;
1115 strongarm_uart_update_status(s);
1116 strongarm_uart_update_int_status(s);
1117 }
1118 }
1119
strongarm_uart_tx(void * opaque)1120 static void strongarm_uart_tx(void *opaque)
1121 {
1122 StrongARMUARTState *s = opaque;
1123 uint64_t new_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
1124
1125 if (s->utcr3 & UTCR3_LBM) /* loopback */ {
1126 strongarm_uart_receive(s, &s->tx_fifo[s->tx_start], 1);
1127 } else if (qemu_chr_fe_backend_connected(&s->chr)) {
1128 /* XXX this blocks entire thread. Rewrite to use
1129 * qemu_chr_fe_write and background I/O callbacks */
1130 qemu_chr_fe_write_all(&s->chr, &s->tx_fifo[s->tx_start], 1);
1131 }
1132
1133 s->tx_start = (s->tx_start + 1) % 8;
1134 s->tx_len--;
1135 if (s->tx_len) {
1136 timer_mod(s->tx_timer, new_xmit_ts + s->char_transmit_time);
1137 }
1138 strongarm_uart_update_status(s);
1139 strongarm_uart_update_int_status(s);
1140 }
1141
strongarm_uart_read(void * opaque,hwaddr addr,unsigned size)1142 static uint64_t strongarm_uart_read(void *opaque, hwaddr addr,
1143 unsigned size)
1144 {
1145 StrongARMUARTState *s = opaque;
1146 uint16_t ret;
1147
1148 switch (addr) {
1149 case UTCR0:
1150 return s->utcr0;
1151
1152 case UTCR1:
1153 return s->brd >> 8;
1154
1155 case UTCR2:
1156 return s->brd & 0xff;
1157
1158 case UTCR3:
1159 return s->utcr3;
1160
1161 case UTDR:
1162 if (s->rx_len != 0) {
1163 ret = s->rx_fifo[s->rx_start];
1164 s->rx_start = (s->rx_start + 1) % 12;
1165 s->rx_len--;
1166 strongarm_uart_update_status(s);
1167 strongarm_uart_update_int_status(s);
1168 return ret;
1169 }
1170 return 0;
1171
1172 case UTSR0:
1173 return s->utsr0;
1174
1175 case UTSR1:
1176 return s->utsr1;
1177
1178 default:
1179 qemu_log_mask(LOG_GUEST_ERROR,
1180 "%s: Bad uart register read 0x"HWADDR_FMT_plx"\n",
1181 __func__, addr);
1182 return 0;
1183 }
1184 }
1185
strongarm_uart_write(void * opaque,hwaddr addr,uint64_t value,unsigned size)1186 static void strongarm_uart_write(void *opaque, hwaddr addr,
1187 uint64_t value, unsigned size)
1188 {
1189 StrongARMUARTState *s = opaque;
1190
1191 switch (addr) {
1192 case UTCR0:
1193 s->utcr0 = value & 0x7f;
1194 strongarm_uart_update_parameters(s);
1195 break;
1196
1197 case UTCR1:
1198 s->brd = (s->brd & 0xff) | ((value & 0xf) << 8);
1199 strongarm_uart_update_parameters(s);
1200 break;
1201
1202 case UTCR2:
1203 s->brd = (s->brd & 0xf00) | (value & 0xff);
1204 strongarm_uart_update_parameters(s);
1205 break;
1206
1207 case UTCR3:
1208 s->utcr3 = value & 0x3f;
1209 if ((s->utcr3 & UTCR3_RXE) == 0) {
1210 s->rx_len = 0;
1211 }
1212 if ((s->utcr3 & UTCR3_TXE) == 0) {
1213 s->tx_len = 0;
1214 }
1215 strongarm_uart_update_status(s);
1216 strongarm_uart_update_int_status(s);
1217 break;
1218
1219 case UTDR:
1220 if ((s->utcr3 & UTCR3_TXE) && s->tx_len != 8) {
1221 s->tx_fifo[(s->tx_start + s->tx_len) % 8] = value;
1222 s->tx_len++;
1223 strongarm_uart_update_status(s);
1224 strongarm_uart_update_int_status(s);
1225 if (s->tx_len == 1) {
1226 strongarm_uart_tx(s);
1227 }
1228 }
1229 break;
1230
1231 case UTSR0:
1232 s->utsr0 = s->utsr0 & ~(value &
1233 (UTSR0_REB | UTSR0_RBB | UTSR0_RID));
1234 strongarm_uart_update_int_status(s);
1235 break;
1236
1237 default:
1238 qemu_log_mask(LOG_GUEST_ERROR,
1239 "%s: Bad uart register write 0x"HWADDR_FMT_plx"\n",
1240 __func__, addr);
1241 }
1242 }
1243
1244 static const MemoryRegionOps strongarm_uart_ops = {
1245 .read = strongarm_uart_read,
1246 .write = strongarm_uart_write,
1247 .endianness = DEVICE_NATIVE_ENDIAN,
1248 };
1249
strongarm_uart_init(Object * obj)1250 static void strongarm_uart_init(Object *obj)
1251 {
1252 StrongARMUARTState *s = STRONGARM_UART(obj);
1253 SysBusDevice *dev = SYS_BUS_DEVICE(obj);
1254
1255 memory_region_init_io(&s->iomem, obj, &strongarm_uart_ops, s,
1256 "uart", 0x10000);
1257 sysbus_init_mmio(dev, &s->iomem);
1258 sysbus_init_irq(dev, &s->irq);
1259 }
1260
strongarm_uart_realize(DeviceState * dev,Error ** errp)1261 static void strongarm_uart_realize(DeviceState *dev, Error **errp)
1262 {
1263 StrongARMUARTState *s = STRONGARM_UART(dev);
1264
1265 s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
1266 strongarm_uart_rx_to,
1267 s);
1268 s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s);
1269 qemu_chr_fe_set_handlers(&s->chr,
1270 strongarm_uart_can_receive,
1271 strongarm_uart_receive,
1272 strongarm_uart_event,
1273 NULL, s, NULL, true);
1274 }
1275
strongarm_uart_reset(DeviceState * dev)1276 static void strongarm_uart_reset(DeviceState *dev)
1277 {
1278 StrongARMUARTState *s = STRONGARM_UART(dev);
1279
1280 s->utcr0 = UTCR0_DSS; /* 8 data, no parity */
1281 s->brd = 23; /* 9600 */
1282 /* enable send & recv - this actually violates spec */
1283 s->utcr3 = UTCR3_TXE | UTCR3_RXE;
1284
1285 s->rx_len = s->tx_len = 0;
1286
1287 strongarm_uart_update_parameters(s);
1288 strongarm_uart_update_status(s);
1289 strongarm_uart_update_int_status(s);
1290 }
1291
strongarm_uart_post_load(void * opaque,int version_id)1292 static int strongarm_uart_post_load(void *opaque, int version_id)
1293 {
1294 StrongARMUARTState *s = opaque;
1295
1296 strongarm_uart_update_parameters(s);
1297 strongarm_uart_update_status(s);
1298 strongarm_uart_update_int_status(s);
1299
1300 /* tx and restart timer */
1301 if (s->tx_len) {
1302 strongarm_uart_tx(s);
1303 }
1304
1305 /* restart rx timeout timer */
1306 if (s->rx_len) {
1307 timer_mod(s->rx_timeout_timer,
1308 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1309 }
1310
1311 return 0;
1312 }
1313
1314 static const VMStateDescription vmstate_strongarm_uart_regs = {
1315 .name = "strongarm-uart",
1316 .version_id = 0,
1317 .minimum_version_id = 0,
1318 .post_load = strongarm_uart_post_load,
1319 .fields = (const VMStateField[]) {
1320 VMSTATE_UINT8(utcr0, StrongARMUARTState),
1321 VMSTATE_UINT16(brd, StrongARMUARTState),
1322 VMSTATE_UINT8(utcr3, StrongARMUARTState),
1323 VMSTATE_UINT8(utsr0, StrongARMUARTState),
1324 VMSTATE_UINT8_ARRAY(tx_fifo, StrongARMUARTState, 8),
1325 VMSTATE_UINT8(tx_start, StrongARMUARTState),
1326 VMSTATE_UINT8(tx_len, StrongARMUARTState),
1327 VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMUARTState, 12),
1328 VMSTATE_UINT8(rx_start, StrongARMUARTState),
1329 VMSTATE_UINT8(rx_len, StrongARMUARTState),
1330 VMSTATE_BOOL(wait_break_end, StrongARMUARTState),
1331 VMSTATE_END_OF_LIST(),
1332 },
1333 };
1334
1335 static Property strongarm_uart_properties[] = {
1336 DEFINE_PROP_CHR("chardev", StrongARMUARTState, chr),
1337 DEFINE_PROP_END_OF_LIST(),
1338 };
1339
strongarm_uart_class_init(ObjectClass * klass,void * data)1340 static void strongarm_uart_class_init(ObjectClass *klass, void *data)
1341 {
1342 DeviceClass *dc = DEVICE_CLASS(klass);
1343
1344 dc->desc = "StrongARM UART controller";
1345 device_class_set_legacy_reset(dc, strongarm_uart_reset);
1346 dc->vmsd = &vmstate_strongarm_uart_regs;
1347 device_class_set_props(dc, strongarm_uart_properties);
1348 dc->realize = strongarm_uart_realize;
1349 }
1350
1351 static const TypeInfo strongarm_uart_info = {
1352 .name = TYPE_STRONGARM_UART,
1353 .parent = TYPE_SYS_BUS_DEVICE,
1354 .instance_size = sizeof(StrongARMUARTState),
1355 .instance_init = strongarm_uart_init,
1356 .class_init = strongarm_uart_class_init,
1357 };
1358
1359 /* Synchronous Serial Ports */
1360
1361 #define TYPE_STRONGARM_SSP "strongarm-ssp"
1362 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMSSPState, STRONGARM_SSP)
1363
1364 struct StrongARMSSPState {
1365 SysBusDevice parent_obj;
1366
1367 MemoryRegion iomem;
1368 qemu_irq irq;
1369 SSIBus *bus;
1370
1371 uint16_t sscr[2];
1372 uint16_t sssr;
1373
1374 uint16_t rx_fifo[8];
1375 uint8_t rx_level;
1376 uint8_t rx_start;
1377 };
1378
1379 #define SSCR0 0x60 /* SSP Control register 0 */
1380 #define SSCR1 0x64 /* SSP Control register 1 */
1381 #define SSDR 0x6c /* SSP Data register */
1382 #define SSSR 0x74 /* SSP Status register */
1383
1384 /* Bitfields for above registers */
1385 #define SSCR0_SPI(x) (((x) & 0x30) == 0x00)
1386 #define SSCR0_SSP(x) (((x) & 0x30) == 0x10)
1387 #define SSCR0_UWIRE(x) (((x) & 0x30) == 0x20)
1388 #define SSCR0_PSP(x) (((x) & 0x30) == 0x30)
1389 #define SSCR0_SSE (1 << 7)
1390 #define SSCR0_DSS(x) (((x) & 0xf) + 1)
1391 #define SSCR1_RIE (1 << 0)
1392 #define SSCR1_TIE (1 << 1)
1393 #define SSCR1_LBM (1 << 2)
1394 #define SSSR_TNF (1 << 2)
1395 #define SSSR_RNE (1 << 3)
1396 #define SSSR_TFS (1 << 5)
1397 #define SSSR_RFS (1 << 6)
1398 #define SSSR_ROR (1 << 7)
1399 #define SSSR_RW 0x0080
1400
strongarm_ssp_int_update(StrongARMSSPState * s)1401 static void strongarm_ssp_int_update(StrongARMSSPState *s)
1402 {
1403 int level = 0;
1404
1405 level |= (s->sssr & SSSR_ROR);
1406 level |= (s->sssr & SSSR_RFS) && (s->sscr[1] & SSCR1_RIE);
1407 level |= (s->sssr & SSSR_TFS) && (s->sscr[1] & SSCR1_TIE);
1408 qemu_set_irq(s->irq, level);
1409 }
1410
strongarm_ssp_fifo_update(StrongARMSSPState * s)1411 static void strongarm_ssp_fifo_update(StrongARMSSPState *s)
1412 {
1413 s->sssr &= ~SSSR_TFS;
1414 s->sssr &= ~SSSR_TNF;
1415 if (s->sscr[0] & SSCR0_SSE) {
1416 if (s->rx_level >= 4) {
1417 s->sssr |= SSSR_RFS;
1418 } else {
1419 s->sssr &= ~SSSR_RFS;
1420 }
1421 if (s->rx_level) {
1422 s->sssr |= SSSR_RNE;
1423 } else {
1424 s->sssr &= ~SSSR_RNE;
1425 }
1426 /* TX FIFO is never filled, so it is always in underrun
1427 condition if SSP is enabled */
1428 s->sssr |= SSSR_TFS;
1429 s->sssr |= SSSR_TNF;
1430 }
1431
1432 strongarm_ssp_int_update(s);
1433 }
1434
strongarm_ssp_read(void * opaque,hwaddr addr,unsigned size)1435 static uint64_t strongarm_ssp_read(void *opaque, hwaddr addr,
1436 unsigned size)
1437 {
1438 StrongARMSSPState *s = opaque;
1439 uint32_t retval;
1440
1441 switch (addr) {
1442 case SSCR0:
1443 return s->sscr[0];
1444 case SSCR1:
1445 return s->sscr[1];
1446 case SSSR:
1447 return s->sssr;
1448 case SSDR:
1449 if (~s->sscr[0] & SSCR0_SSE) {
1450 return 0xffffffff;
1451 }
1452 if (s->rx_level < 1) {
1453 trace_strongarm_ssp_read_underrun();
1454 return 0xffffffff;
1455 }
1456 s->rx_level--;
1457 retval = s->rx_fifo[s->rx_start++];
1458 s->rx_start &= 0x7;
1459 strongarm_ssp_fifo_update(s);
1460 return retval;
1461 default:
1462 qemu_log_mask(LOG_GUEST_ERROR,
1463 "%s: Bad ssp register read 0x"HWADDR_FMT_plx"\n",
1464 __func__, addr);
1465 break;
1466 }
1467 return 0;
1468 }
1469
strongarm_ssp_write(void * opaque,hwaddr addr,uint64_t value,unsigned size)1470 static void strongarm_ssp_write(void *opaque, hwaddr addr,
1471 uint64_t value, unsigned size)
1472 {
1473 StrongARMSSPState *s = opaque;
1474
1475 switch (addr) {
1476 case SSCR0:
1477 s->sscr[0] = value & 0xffbf;
1478 if ((s->sscr[0] & SSCR0_SSE) && SSCR0_DSS(value) < 4) {
1479 qemu_log_mask(LOG_GUEST_ERROR, "%s: Wrong data size: %i bits\n",
1480 __func__, (int)SSCR0_DSS(value));
1481 }
1482 if (!(value & SSCR0_SSE)) {
1483 s->sssr = 0;
1484 s->rx_level = 0;
1485 }
1486 strongarm_ssp_fifo_update(s);
1487 break;
1488
1489 case SSCR1:
1490 s->sscr[1] = value & 0x2f;
1491 if (value & SSCR1_LBM) {
1492 qemu_log_mask(LOG_GUEST_ERROR,
1493 "%s: Attempt to use SSP LBM mode\n",
1494 __func__);
1495 }
1496 strongarm_ssp_fifo_update(s);
1497 break;
1498
1499 case SSSR:
1500 s->sssr &= ~(value & SSSR_RW);
1501 strongarm_ssp_int_update(s);
1502 break;
1503
1504 case SSDR:
1505 if (SSCR0_UWIRE(s->sscr[0])) {
1506 value &= 0xff;
1507 } else
1508 /* Note how 32bits overflow does no harm here */
1509 value &= (1 << SSCR0_DSS(s->sscr[0])) - 1;
1510
1511 /* Data goes from here to the Tx FIFO and is shifted out from
1512 * there directly to the slave, no need to buffer it.
1513 */
1514 if (s->sscr[0] & SSCR0_SSE) {
1515 uint32_t readval;
1516 if (s->sscr[1] & SSCR1_LBM) {
1517 readval = value;
1518 } else {
1519 readval = ssi_transfer(s->bus, value);
1520 }
1521
1522 if (s->rx_level < 0x08) {
1523 s->rx_fifo[(s->rx_start + s->rx_level++) & 0x7] = readval;
1524 } else {
1525 s->sssr |= SSSR_ROR;
1526 }
1527 }
1528 strongarm_ssp_fifo_update(s);
1529 break;
1530
1531 default:
1532 qemu_log_mask(LOG_GUEST_ERROR,
1533 "%s: Bad ssp register write 0x"HWADDR_FMT_plx"\n",
1534 __func__, addr);
1535 break;
1536 }
1537 }
1538
1539 static const MemoryRegionOps strongarm_ssp_ops = {
1540 .read = strongarm_ssp_read,
1541 .write = strongarm_ssp_write,
1542 .endianness = DEVICE_NATIVE_ENDIAN,
1543 };
1544
strongarm_ssp_post_load(void * opaque,int version_id)1545 static int strongarm_ssp_post_load(void *opaque, int version_id)
1546 {
1547 StrongARMSSPState *s = opaque;
1548
1549 strongarm_ssp_fifo_update(s);
1550
1551 return 0;
1552 }
1553
strongarm_ssp_init(Object * obj)1554 static void strongarm_ssp_init(Object *obj)
1555 {
1556 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1557 DeviceState *dev = DEVICE(sbd);
1558 StrongARMSSPState *s = STRONGARM_SSP(dev);
1559
1560 sysbus_init_irq(sbd, &s->irq);
1561
1562 memory_region_init_io(&s->iomem, obj, &strongarm_ssp_ops, s,
1563 "ssp", 0x1000);
1564 sysbus_init_mmio(sbd, &s->iomem);
1565
1566 s->bus = ssi_create_bus(dev, "ssi");
1567 }
1568
strongarm_ssp_reset(DeviceState * dev)1569 static void strongarm_ssp_reset(DeviceState *dev)
1570 {
1571 StrongARMSSPState *s = STRONGARM_SSP(dev);
1572
1573 s->sssr = 0x03; /* 3 bit data, SPI, disabled */
1574 s->rx_start = 0;
1575 s->rx_level = 0;
1576 }
1577
1578 static const VMStateDescription vmstate_strongarm_ssp_regs = {
1579 .name = "strongarm-ssp",
1580 .version_id = 0,
1581 .minimum_version_id = 0,
1582 .post_load = strongarm_ssp_post_load,
1583 .fields = (const VMStateField[]) {
1584 VMSTATE_UINT16_ARRAY(sscr, StrongARMSSPState, 2),
1585 VMSTATE_UINT16(sssr, StrongARMSSPState),
1586 VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMSSPState, 8),
1587 VMSTATE_UINT8(rx_start, StrongARMSSPState),
1588 VMSTATE_UINT8(rx_level, StrongARMSSPState),
1589 VMSTATE_END_OF_LIST(),
1590 },
1591 };
1592
strongarm_ssp_class_init(ObjectClass * klass,void * data)1593 static void strongarm_ssp_class_init(ObjectClass *klass, void *data)
1594 {
1595 DeviceClass *dc = DEVICE_CLASS(klass);
1596
1597 dc->desc = "StrongARM SSP controller";
1598 device_class_set_legacy_reset(dc, strongarm_ssp_reset);
1599 dc->vmsd = &vmstate_strongarm_ssp_regs;
1600 }
1601
1602 static const TypeInfo strongarm_ssp_info = {
1603 .name = TYPE_STRONGARM_SSP,
1604 .parent = TYPE_SYS_BUS_DEVICE,
1605 .instance_size = sizeof(StrongARMSSPState),
1606 .instance_init = strongarm_ssp_init,
1607 .class_init = strongarm_ssp_class_init,
1608 };
1609
1610 /* Main CPU functions */
sa1110_init(const char * cpu_type)1611 StrongARMState *sa1110_init(const char *cpu_type)
1612 {
1613 StrongARMState *s;
1614 int i;
1615
1616 s = g_new0(StrongARMState, 1);
1617
1618 if (strncmp(cpu_type, "sa1110", 6)) {
1619 error_report("Machine requires a SA1110 processor.");
1620 exit(1);
1621 }
1622
1623 s->cpu = ARM_CPU(cpu_create(cpu_type));
1624
1625 s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000,
1626 qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ),
1627 qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ),
1628 NULL);
1629
1630 sysbus_create_varargs("pxa25x-timer", 0x90000000,
1631 qdev_get_gpio_in(s->pic, SA_PIC_OSTC0),
1632 qdev_get_gpio_in(s->pic, SA_PIC_OSTC1),
1633 qdev_get_gpio_in(s->pic, SA_PIC_OSTC2),
1634 qdev_get_gpio_in(s->pic, SA_PIC_OSTC3),
1635 NULL);
1636
1637 sysbus_create_simple(TYPE_STRONGARM_RTC, 0x90010000,
1638 qdev_get_gpio_in(s->pic, SA_PIC_RTC_ALARM));
1639
1640 s->gpio = strongarm_gpio_init(0x90040000, s->pic);
1641
1642 s->ppc = sysbus_create_varargs(TYPE_STRONGARM_PPC, 0x90060000, NULL);
1643
1644 for (i = 0; sa_serial[i].io_base; i++) {
1645 DeviceState *dev = qdev_new(TYPE_STRONGARM_UART);
1646 qdev_prop_set_chr(dev, "chardev", serial_hd(i));
1647 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
1648 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0,
1649 sa_serial[i].io_base);
1650 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
1651 qdev_get_gpio_in(s->pic, sa_serial[i].irq));
1652 }
1653
1654 s->ssp = sysbus_create_varargs(TYPE_STRONGARM_SSP, 0x80070000,
1655 qdev_get_gpio_in(s->pic, SA_PIC_SSP), NULL);
1656 s->ssp_bus = (SSIBus *)qdev_get_child_bus(s->ssp, "ssi");
1657
1658 return s;
1659 }
1660
strongarm_register_types(void)1661 static void strongarm_register_types(void)
1662 {
1663 type_register_static(&strongarm_pic_info);
1664 type_register_static(&strongarm_rtc_sysbus_info);
1665 type_register_static(&strongarm_gpio_info);
1666 type_register_static(&strongarm_ppc_info);
1667 type_register_static(&strongarm_uart_info);
1668 type_register_static(&strongarm_ssp_info);
1669 }
1670
1671 type_init(strongarm_register_types)
1672