1 /*	$NetBSD: i2c_io.h,v 1.3 2012/04/22 14:10:36 pgoyette Exp $	*/
2 
3 /*
4  * Copyright (c) 2003 Wasabi Systems, Inc.
5  * All rights reserved.
6  *
7  * Written by Jason R. Thorpe for Wasabi Systems, Inc.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  * 3. All advertising materials mentioning features or use of this software
18  *    must display the following acknowledgement:
19  *      This product includes software developed for the NetBSD Project by
20  *      Wasabi Systems, Inc.
21  * 4. The name of Wasabi Systems, Inc. may not be used to endorse
22  *    or promote products derived from this software without specific prior
23  *    written permission.
24  *
25  * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
26  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
29  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35  * POSSIBILITY OF SUCH DAMAGE.
36  */
37 
38 #ifndef _DEV_I2C_I2C_IO_H_
39 #define	_DEV_I2C_I2C_IO_H_
40 
41 #include <sys/ioccom.h>
42 
43 /* I2C bus address. */
44 typedef uint16_t i2c_addr_t;
45 
46 /* High-level I2C operations. */
47 #define	I2C_OPMASK_STOP		1
48 #define	I2C_OPMASK_WRITE	2
49 #define	I2C_OPMASK_BLKMODE	4
50 
51 #define	I2C_OP_STOP_P(x)	(((int)(x) & I2C_OPMASK_STOP) != 0)
52 #define	I2C_OP_WRITE_P(x)	(((int)(x) & I2C_OPMASK_WRITE) != 0)
53 #define	I2C_OP_READ_P(x)	(!I2C_OP_WRITE_P(x))
54 #define	I2C_OP_BLKMODE_P(x)	(((int)(x) & I2C_OPMASK_BLKMODE) != 0)
55 
56 typedef enum {
57         I2C_OP_READ		= 0,
58         I2C_OP_READ_WITH_STOP	= I2C_OPMASK_STOP,
59         I2C_OP_WRITE		= I2C_OPMASK_WRITE,
60         I2C_OP_WRITE_WITH_STOP	= I2C_OPMASK_WRITE   | I2C_OPMASK_STOP,
61         I2C_OP_READ_BLOCK	= I2C_OPMASK_BLKMODE | I2C_OPMASK_STOP,
62         I2C_OP_WRITE_BLOCK	= I2C_OPMASK_BLKMODE | I2C_OPMASK_WRITE |
63 					I2C_OPMASK_STOP,
64 } i2c_op_t;
65 
66 /*
67  * This structure describes a single I2C control script fragment.
68  *
69  * Note that use of this scripted API allows for support of automated
70  * SMBus controllers.  The following table maps SMBus operations to
71  * script fragment configuration:
72  *
73  *	SMBus "write byte":		I2C_OP_WRITE_WITH_STOP
74  *					cmdlen = 1
75  *
76  *	SMBus "read byte":		I2C_OP_READ_WITH_STOP
77  *					cmdlen = 1
78  *
79  *	SMBus "receive byte":		I2C_OP_READ_WITH_STOP
80  *					cmdlen = 0
81  *
82  * Note that while each of these 3 SMBus operations implies a STOP
83  * (which an automated controller will likely perform automatically),
84  * non-SMBus clients may continue to function even if they issue
85  * I2C_OP_WRITE and I2C_OP_READ.
86  */
87 
88 /*
89  * I2C_IOCTL_EXEC:
90  *
91  *	User ioctl to execute an i2c operation.
92  */
93 typedef struct i2c_ioctl_exec {
94 	i2c_op_t iie_op;		/* operation to perform */
95 	i2c_addr_t iie_addr;		/* address of device */
96 	const void *iie_cmd;		/* pointer to command */
97 	size_t iie_cmdlen;		/* length of command */
98 	void *iie_buf;			/* pointer to data buffer */
99 	size_t iie_buflen;		/* length of data buffer */
100 } i2c_ioctl_exec_t;
101 #define	I2C_EXEC_MAX_CMDLEN	32
102 #define	I2C_EXEC_MAX_BUFLEN	32
103 
104 #define	I2C_IOCTL_EXEC		 _IOW('I', 0, i2c_ioctl_exec_t)
105 
106 #endif /* _DEV_I2C_I2C_IO_H_ */
107