1 /* $OpenBSD: i2c_io.h,v 1.2 2020/01/11 11:30:47 kettenis Exp $ */ 2 /* $NetBSD: i2c_io.h,v 1.3 2012/04/22 14:10:36 pgoyette Exp $ */ 3 4 /* 5 * Copyright (c) 2003 Wasabi Systems, Inc. 6 * All rights reserved. 7 * 8 * Written by Jason R. Thorpe for Wasabi Systems, Inc. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed for the NetBSD Project by 21 * Wasabi Systems, Inc. 22 * 4. The name of Wasabi Systems, Inc. may not be used to endorse 23 * or promote products derived from this software without specific prior 24 * written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND 27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 39 #ifndef _DEV_I2C_I2C_IO_H_ 40 #define _DEV_I2C_I2C_IO_H_ 41 42 #include <sys/ioccom.h> 43 44 /* I2C bus address. */ 45 typedef uint16_t i2c_addr_t; 46 47 /* High-level I2C operations. */ 48 #define I2C_OPMASK_STOP 1 49 #define I2C_OPMASK_WRITE 2 50 #define I2C_OPMASK_BLKMODE 4 51 52 #define I2C_OP_STOP_P(x) (((int)(x) & I2C_OPMASK_STOP) != 0) 53 #define I2C_OP_WRITE_P(x) (((int)(x) & I2C_OPMASK_WRITE) != 0) 54 #define I2C_OP_READ_P(x) (!I2C_OP_WRITE_P(x)) 55 #define I2C_OP_BLKMODE_P(x) (((int)(x) & I2C_OPMASK_BLKMODE) != 0) 56 57 typedef enum { 58 I2C_OP_READ = 0, 59 I2C_OP_READ_WITH_STOP = I2C_OPMASK_STOP, 60 I2C_OP_WRITE = I2C_OPMASK_WRITE, 61 I2C_OP_WRITE_WITH_STOP = I2C_OPMASK_WRITE | I2C_OPMASK_STOP, 62 I2C_OP_READ_BLOCK = I2C_OPMASK_BLKMODE | I2C_OPMASK_STOP, 63 I2C_OP_WRITE_BLOCK = I2C_OPMASK_BLKMODE | I2C_OPMASK_WRITE | 64 I2C_OPMASK_STOP, 65 } i2c_op_t; 66 67 /* 68 * This structure describes a single I2C control script fragment. 69 * 70 * Note that use of this scripted API allows for support of automated 71 * SMBus controllers. The following table maps SMBus operations to 72 * script fragment configuration: 73 * 74 * SMBus "write byte": I2C_OP_WRITE_WITH_STOP 75 * cmdlen = 1 76 * 77 * SMBus "read byte": I2C_OP_READ_WITH_STOP 78 * cmdlen = 1 79 * 80 * SMBus "receive byte": I2C_OP_READ_WITH_STOP 81 * cmdlen = 0 82 * 83 * Note that while each of these 3 SMBus operations implies a STOP 84 * (which an automated controller will likely perform automatically), 85 * non-SMBus clients may continue to function even if they issue 86 * I2C_OP_WRITE and I2C_OP_READ. 87 */ 88 89 #ifdef notyet 90 /* 91 * I2C_IOCTL_EXEC: 92 * 93 * User ioctl to execute an i2c operation. 94 */ 95 typedef struct i2c_ioctl_exec { 96 i2c_op_t iie_op; /* operation to perform */ 97 i2c_addr_t iie_addr; /* address of device */ 98 const void *iie_cmd; /* pointer to command */ 99 size_t iie_cmdlen; /* length of command */ 100 void *iie_buf; /* pointer to data buffer */ 101 size_t iie_buflen; /* length of data buffer */ 102 } i2c_ioctl_exec_t; 103 #define I2C_EXEC_MAX_CMDLEN 32 104 #define I2C_EXEC_MAX_BUFLEN 32 105 106 #define I2C_IOCTL_EXEC _IOW('I', 0, i2c_ioctl_exec_t) 107 #endif 108 109 #endif /* _DEV_I2C_I2C_IO_H_ */ 110