1 /*	$NetBSD: ieee80211_var.h,v 1.30 2016/04/08 14:30:47 roy Exp $	*/
2 /*-
3  * Copyright (c) 2001 Atsushi Onoe
4  * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The name of the author may not be used to endorse or promote products
16  *    derived from this software without specific prior written permission.
17  *
18  * Alternatively, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") version 2 as published by the Free
20  * Software Foundation.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
23  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  *
33  * $FreeBSD: src/sys/net80211/ieee80211_var.h,v 1.30 2005/08/10 16:22:29 sam Exp $
34  */
35 #ifndef _NET80211_IEEE80211_VAR_H_
36 #define _NET80211_IEEE80211_VAR_H_
37 
38 /*
39  * Definitions for IEEE 802.11 drivers.
40  */
41 #define	IEEE80211_DEBUG
42 #undef	IEEE80211_DEBUG_REFCNT			/* node refcnt stuff */
43 
44 /* NB: portability glue must go first */
45 #ifdef __NetBSD__
46 #include <net80211/ieee80211_netbsd.h>
47 #elif __FreeBSD__
48 #include <net80211/ieee80211_freebsd.h>
49 #elif __linux__
50 #include <net80211/ieee80211_linux.h>
51 #else
52 #error	"No support for your operating system!"
53 #endif
54 
55 #include <sys/queue.h>	/* XXX */
56 
57 #include <net80211/_ieee80211.h>
58 #include <net80211/ieee80211.h>
59 #include <net80211/ieee80211_crypto.h>
60 #include <net80211/ieee80211_ioctl.h>		/* for ieee80211_stats */
61 #include <net80211/ieee80211_node.h>
62 #include <net80211/ieee80211_proto.h>
63 
64 #define	IEEE80211_TXPOWER_MAX	100	/* .5 dbM (XXX units?) */
65 #define	IEEE80211_TXPOWER_MIN	0	/* kill radio */
66 
67 #define	IEEE80211_DTIM_MAX	15	/* max DTIM period */
68 #define	IEEE80211_DTIM_MIN	1	/* min DTIM period */
69 #define	IEEE80211_DTIM_DEFAULT	1	/* default DTIM period */
70 
71 /* NB: min+max come from WiFi requirements */
72 #define	IEEE80211_BINTVAL_MAX	1000	/* max beacon interval (TU's) */
73 #define	IEEE80211_BINTVAL_MIN	25	/* min beacon interval (TU's) */
74 #define	IEEE80211_BINTVAL_DEFAULT 100	/* default beacon interval (TU's) */
75 
76 #define	IEEE80211_BMISS_MAX	2	/* maximum consecutive bmiss allowed */
77 
78 #define	IEEE80211_PS_SLEEP	0x1	/* STA is in power saving mode */
79 #define	IEEE80211_PS_MAX_QUEUE	50	/* maximum saved packets */
80 
81 #define	IEEE80211_FIXED_RATE_NONE	-1
82 #define	IEEE80211_MCAST_RATE_DEFAULT	(2*1)	/* default mcast rate (1M) */
83 
84 #define	IEEE80211_RTS_DEFAULT		IEEE80211_RTS_MAX
85 #define	IEEE80211_FRAG_DEFAULT		IEEE80211_FRAG_MAX
86 
87 #define	IEEE80211_MS_TO_TU(x)	(((x) * 1000) / 1024)
88 #define	IEEE80211_TU_TO_MS(x)	(((x) * 1024) / 1000)
89 
90 struct ieee80211_aclator;
91 
92 #define	IEEE80211_PS_SLEEP	0x1	/* STA is in power saving mode */
93 
94 #define	IEEE80211_PS_MAX_QUEUE	50	/* maximum saved packets */
95 
96 struct ieee80211com {
97 	SLIST_ENTRY(ieee80211com) ic_next;
98 	struct ifnet		*ic_ifp;	/* associated device */
99 	struct ieee80211_stats	ic_stats;	/* statistics */
100 	struct sysctllog	*ic_sysctllog;	/* for destroying sysctl tree */
101 	u_int32_t		ic_debug;	/* debug msg flags */
102 	int			ic_vap;		/* virtual AP index */
103 	ieee80211_beacon_lock_t	ic_beaconlock;	/* beacon update lock */
104 
105 	LIST_ENTRY(ieee80211com) ic_list;	/* chain of all ieee80211com */
106 	int			(*ic_reset)(struct ifnet *);
107 	void			(*ic_recv_mgmt)(struct ieee80211com *,
108 				    struct mbuf *, struct ieee80211_node *,
109 				    int, int, u_int32_t);
110 	int			(*ic_send_mgmt)(struct ieee80211com *,
111 				    struct ieee80211_node *, int, int);
112 	int			(*ic_newstate)(struct ieee80211com *,
113 				    enum ieee80211_state, int);
114 	void			(*ic_newassoc)(struct ieee80211_node *, int);
115 	void			(*ic_updateslot)(struct ifnet *);
116 	void			(*ic_set_tim)(struct ieee80211_node *, int);
117 	u_int8_t		ic_myaddr[IEEE80211_ADDR_LEN];
118 	struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
119 	struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1];
120 	u_int8_t		ic_chan_avail[IEEE80211_CHAN_BYTES];
121 	u_int8_t		ic_chan_active[IEEE80211_CHAN_BYTES];
122 	u_int8_t		ic_chan_scan[IEEE80211_CHAN_BYTES];
123 	struct ieee80211_node_table ic_scan;	/* scan candidates */
124 	struct ifqueue		ic_mgtq;
125 	u_int32_t		ic_flags;	/* state flags */
126 	u_int32_t		ic_flags_ext;	/* extended state flags */
127 	u_int32_t		ic_caps;	/* capabilities */
128 	u_int16_t		ic_modecaps;	/* set of mode capabilities */
129 	u_int16_t		ic_curmode;	/* current mode */
130 	enum ieee80211_phytype	ic_phytype;	/* XXX wrong for multi-mode */
131 	enum ieee80211_opmode	ic_opmode;	/* operation mode */
132 	enum ieee80211_state	ic_state;	/* 802.11 state */
133 	enum ieee80211_protmode	ic_protmode;	/* 802.11g protection mode */
134 	enum ieee80211_roamingmode ic_roaming;	/* roaming mode */
135 	struct ieee80211_node_table ic_sta;	/* stations/neighbors */
136 	u_int32_t		*ic_aid_bitmap;	/* association id map */
137 	u_int16_t		ic_max_aid;
138 	u_int16_t		ic_sta_assoc;	/* stations associated */
139 	u_int16_t		ic_ps_sta;	/* stations in power save */
140 	u_int16_t		ic_ps_pending;	/* ps sta's w/ pending frames */
141 	u_int8_t		*ic_tim_bitmap;	/* power-save stations w/ data*/
142 	u_int16_t		ic_tim_len;	/* ic_tim_bitmap size (bytes) */
143 	u_int8_t		ic_dtim_period;	/* DTIM period */
144 	u_int8_t		ic_dtim_count;	/* DTIM count for last bcn */
145 	struct ifmedia		ic_media;	/* interface media config */
146 	struct bpf_if *		ic_rawbpf;	/* packet filter structure */
147 	struct ieee80211_node	*ic_bss;	/* information for this node */
148 	struct ieee80211_channel *ic_ibss_chan;
149 	struct ieee80211_channel *ic_curchan;	/* current channel */
150 	int			ic_fixed_rate;	/* index to ic_sup_rates[] */
151 	int			ic_mcast_rate;	/* rate for mcast frames */
152 	u_int16_t		ic_rtsthreshold;
153 	u_int16_t		ic_fragthreshold;
154 	u_int8_t		ic_bmiss_count;	/* current beacon miss count */
155 	int			ic_bmiss_max;	/* max bmiss before scan */
156 	struct ieee80211_node	*(*ic_node_alloc)(struct ieee80211_node_table*);
157 	void			(*ic_node_free)(struct ieee80211_node *);
158 	void			(*ic_node_cleanup)(struct ieee80211_node *);
159 	u_int8_t		(*ic_node_getrssi)(const struct ieee80211_node*);
160 	u_int16_t		ic_lintval;	/* listen interval */
161 	u_int16_t		ic_bintval;	/* beacon interval */
162 	u_int16_t		ic_holdover;	/* PM hold over duration */
163 	u_int16_t		ic_txmin;	/* min tx retry count */
164 	u_int16_t		ic_txmax;	/* max tx retry count */
165 	u_int16_t		ic_txlifetime;	/* tx lifetime */
166 	u_int16_t		ic_txpowlimit;	/* global tx power limit */
167 	u_int16_t		ic_bmisstimeout;/* beacon miss threshold (ms) */
168 	u_int16_t		ic_nonerpsta;	/* # non-ERP stations */
169 	u_int16_t		ic_longslotsta;	/* # long slot time stations */
170 	int			ic_mgt_timer;	/* mgmt timeout */
171 	int			ic_inact_timer;	/* inactivity timer wait */
172 	int			ic_des_esslen;
173 	u_int8_t		ic_des_essid[IEEE80211_NWID_LEN];
174 	struct ieee80211_channel *ic_des_chan;	/* desired channel */
175 	u_int8_t		ic_des_bssid[IEEE80211_ADDR_LEN];
176 	void			*ic_opt_ie;	/* user-specified IE's */
177 	u_int16_t		ic_opt_ie_len;	/* length of ni_opt_ie */
178 	/*
179 	 * Inactivity timer settings for nodes.
180 	 */
181 	int			ic_inact_init;	/* initial setting */
182 	int			ic_inact_auth;	/* auth but not assoc setting */
183 	int			ic_inact_run;	/* authorized setting */
184 	int			ic_inact_probe;	/* inactive probe time */
185 
186 	/*
187 	 * WME/WMM state.
188 	 */
189 	struct ieee80211_wme_state ic_wme;
190 
191 	/*
192 	 * Cipher state/configuration.
193 	 */
194 	struct ieee80211_crypto_state ic_crypto;
195 #define	ic_nw_keys	ic_crypto.cs_nw_keys	/* XXX compatibility */
196 #define	ic_def_txkey	ic_crypto.cs_def_txkey	/* XXX compatibility */
197 
198 	/*
199 	 * 802.1x glue.  When an authenticator attaches it
200 	 * fills in this section.  We assume that when ic_ec
201 	 * is setup that the methods are safe to call.
202 	 */
203 	const struct ieee80211_authenticator *ic_auth;
204 	struct eapolcom		*ic_ec;
205 
206 	/*
207 	 * Access control glue.  When a control agent attaches
208 	 * it fills in this section.  We assume that when ic_ac
209 	 * is setup that the methods are safe to call.
210 	 */
211 	const struct ieee80211_aclator *ic_acl;
212 	void			*ic_as;
213 };
214 
215 LIST_HEAD(ieee80211com_head, ieee80211com);
216 
217 extern struct ieee80211com_head ieee80211com_head;
218 
219 #define	IEEE80211_ADDR_EQ(a1,a2)	(memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
220 #define	IEEE80211_ADDR_COPY(dst,src)	memcpy(dst,src,IEEE80211_ADDR_LEN)
221 
222 /* ic_flags */
223 /* NB: bits 0x4c available */
224 #define	IEEE80211_F_FF		0x00000001	/* CONF: ATH FF enabled */
225 #define	IEEE80211_F_TURBOP	0x00000002	/* CONF: ATH Turbo enabled*/
226 /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
227 #define	IEEE80211_F_PRIVACY	0x00000010	/* CONF: privacy enabled */
228 #define	IEEE80211_F_PUREG	0x00000020	/* CONF: 11g w/o 11b sta's */
229 #define	IEEE80211_F_SCAN	0x00000080	/* STATUS: scanning */
230 #define	IEEE80211_F_ASCAN	0x00000100	/* STATUS: active scan */
231 #define	IEEE80211_F_SIBSS	0x00000200	/* STATUS: start IBSS */
232 /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
233 #define	IEEE80211_F_SHSLOT	0x00000400	/* STATUS: use short slot time*/
234 #define	IEEE80211_F_PMGTON	0x00000800	/* CONF: Power mgmt enable */
235 #define	IEEE80211_F_DESBSSID	0x00001000	/* CONF: des_bssid is set */
236 #define	IEEE80211_F_WME		0x00002000	/* CONF: enable WME use */
237 #define	IEEE80211_F_BGSCAN	0x00004000	/* CONF: bg scan enabled (???)*/
238 #define	IEEE80211_F_SWRETRY	0x00008000	/* CONF: sw tx retry enabled */
239 #define IEEE80211_F_TXPOW_FIXED	0x00010000	/* TX Power: fixed rate */
240 #define	IEEE80211_F_IBSSON	0x00020000	/* CONF: IBSS creation enable */
241 #define	IEEE80211_F_SHPREAMBLE	0x00040000	/* STATUS: use short preamble */
242 #define	IEEE80211_F_DATAPAD	0x00080000	/* CONF: do alignment pad */
243 #define	IEEE80211_F_USEPROT	0x00100000	/* STATUS: protection enabled */
244 #define	IEEE80211_F_USEBARKER	0x00200000	/* STATUS: use barker preamble*/
245 #define	IEEE80211_F_TIMUPDATE	0x00400000	/* STATUS: update beacon tim */
246 #define	IEEE80211_F_WPA1	0x00800000	/* CONF: WPA enabled */
247 #define	IEEE80211_F_WPA2	0x01000000	/* CONF: WPA2 enabled */
248 #define	IEEE80211_F_WPA		0x01800000	/* CONF: WPA/WPA2 enabled */
249 #define	IEEE80211_F_DROPUNENC	0x02000000	/* CONF: drop unencrypted */
250 #define	IEEE80211_F_COUNTERM	0x04000000	/* CONF: TKIP countermeasures */
251 #define	IEEE80211_F_HIDESSID	0x08000000	/* CONF: hide SSID in beacon */
252 #define	IEEE80211_F_NOBRIDGE	0x10000000	/* CONF: dis. internal bridge */
253 #define	IEEE80211_F_WMEUPDATE	0x20000000	/* STATUS: update beacon wme */
254 
255 /* ic_flags_ext */
256 #define	IEEE80211_FEXT_WDS	0x00000001	/* CONF: 4 addr allowed */
257 /* 0x00000006 reserved */
258 #define	IEEE80211_FEXT_BGSCAN	0x00000008	/* STATUS: enable full bgscan completion */
259 #define	IEEE80211_FEXT_PROBECHAN 0x00020000	/* CONF: probe passive channel*/
260 
261 /* ic_caps */
262 #define	IEEE80211_C_WEP		0x00000001	/* CAPABILITY: WEP available */
263 #define	IEEE80211_C_TKIP	0x00000002	/* CAPABILITY: TKIP available */
264 #define	IEEE80211_C_AES		0x00000004	/* CAPABILITY: AES OCB avail */
265 #define	IEEE80211_C_AES_CCM	0x00000008	/* CAPABILITY: AES CCM avail */
266 #define	IEEE80211_C_CKIP	0x00000020	/* CAPABILITY: CKIP available */
267 #define	IEEE80211_C_FF		0x00000040	/* CAPABILITY: ATH FF avail */
268 #define	IEEE80211_C_TURBOP	0x00000080	/* CAPABILITY: ATH Turbo avail*/
269 #define	IEEE80211_C_IBSS	0x00000100	/* CAPABILITY: IBSS available */
270 #define	IEEE80211_C_PMGT	0x00000200	/* CAPABILITY: Power mgmt */
271 #define	IEEE80211_C_HOSTAP	0x00000400	/* CAPABILITY: HOSTAP avail */
272 #define	IEEE80211_C_AHDEMO	0x00000800	/* CAPABILITY: Old Adhoc Demo */
273 #define	IEEE80211_C_SWRETRY	0x00001000	/* CAPABILITY: sw tx retry */
274 #define	IEEE80211_C_TXPMGT	0x00002000	/* CAPABILITY: tx power mgmt */
275 #define	IEEE80211_C_SHSLOT	0x00004000	/* CAPABILITY: short slottime */
276 #define	IEEE80211_C_SHPREAMBLE	0x00008000	/* CAPABILITY: short preamble */
277 #define	IEEE80211_C_MONITOR	0x00010000	/* CAPABILITY: monitor mode */
278 #define	IEEE80211_C_TKIPMIC	0x00020000	/* CAPABILITY: TKIP MIC avail */
279 #define IEEE80211_C_WME_TKIPMIC 0x00040000      /* CAPABILITY: TKIP MIC for QoS
280 						   frame */
281 /* 0x780000 available */
282 #define	IEEE80211_C_WPA1	0x00800000	/* CAPABILITY: WPA1 avail */
283 #define	IEEE80211_C_WPA2	0x01000000	/* CAPABILITY: WPA2 avail */
284 #define	IEEE80211_C_WPA		0x01800000	/* CAPABILITY: WPA1+WPA2 avail*/
285 #define	IEEE80211_C_BURST	0x02000000	/* CAPABILITY: frame bursting */
286 #define	IEEE80211_C_WME		0x04000000	/* CAPABILITY: WME avail */
287 #define	IEEE80211_C_WDS		0x08000000	/* CAPABILITY: 4-addr support */
288 /* 0x10000000 reserved */
289 #define	IEEE80211_C_BGSCAN	0x20000000	/* CAPABILITY: bg scanning */
290 #define	IEEE80211_C_TXFRAG	0x40000000	/* CAPABILITY: tx fragments */
291 /* XXX protection/barker? */
292 
293 #define	IEEE80211_C_CRYPTO	0x0000002f	/* CAPABILITY: crypto alg's */
294 
295 void	ieee80211_ifattach(struct ieee80211com *);
296 void	ieee80211_ifdetach(struct ieee80211com *);
297 void	ieee80211_announce(struct ieee80211com *);
298 void	ieee80211_media_init(struct ieee80211com *,
299 		ifm_change_cb_t, ifm_stat_cb_t);
300 struct ieee80211com *ieee80211_find_vap(const u_int8_t mac[IEEE80211_ADDR_LEN]);
301 int	ieee80211_media_change(struct ifnet *);
302 void	ieee80211_media_status(struct ifnet *, struct ifmediareq *);
303 int	ieee80211_ioctl(struct ieee80211com *, u_long, void *);
304 int	ieee80211_cfgget(struct ieee80211com *, u_long, void *);
305 int	ieee80211_cfgset(struct ieee80211com *, u_long, void *);
306 void	ieee80211_watchdog(struct ieee80211com *);
307 int	ieee80211_rate2media(struct ieee80211com *, int,
308 		enum ieee80211_phymode);
309 int	ieee80211_media2rate(int);
310 u_int	ieee80211_mhz2ieee(u_int, u_int);
311 u_int	ieee80211_chan2ieee(struct ieee80211com *, struct ieee80211_channel *);
312 u_int	ieee80211_ieee2mhz(u_int, u_int);
313 int	ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
314 enum ieee80211_phymode ieee80211_chan2mode(struct ieee80211com *,
315 		struct ieee80211_channel *);
316 int	ieee80211_get_rate(const struct ieee80211_node *);
317 
318 /*
319  * Key update synchronization methods.  XXX should not be visible.
320  */
321 static __inline void
ieee80211_key_update_begin(struct ieee80211com * ic)322 ieee80211_key_update_begin(struct ieee80211com *ic)
323 {
324 	ic->ic_crypto.cs_key_update_begin(ic);
325 }
326 static __inline void
ieee80211_key_update_end(struct ieee80211com * ic)327 ieee80211_key_update_end(struct ieee80211com *ic)
328 {
329 	ic->ic_crypto.cs_key_update_end(ic);
330 }
331 
332 /*
333  * XXX these need to be here for IEEE80211_F_DATAPAD
334  */
335 
336 /*
337  * Return the space occupied by the 802.11 header and any
338  * padding required by the driver.  This works for a
339  * management or data frame.
340  */
341 static __inline int
ieee80211_hdrspace(struct ieee80211com * ic,const void * data)342 ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
343 {
344 	int size = ieee80211_hdrsize(data);
345 	if (ic->ic_flags & IEEE80211_F_DATAPAD)
346 		size = roundup(size, sizeof(u_int32_t));
347 	return size;
348 }
349 
350 /*
351  * Like ieee80211_hdrspace, but handles any type of frame.
352  */
353 static __inline int
ieee80211_anyhdrspace(struct ieee80211com * ic,const void * data)354 ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
355 {
356 	int size = ieee80211_anyhdrsize(data);
357 	if (ic->ic_flags & IEEE80211_F_DATAPAD)
358 		size = roundup(size, sizeof(u_int32_t));
359 	return size;
360 }
361 
362 #define	IEEE80211_MSG_DEBUG	0x40000000	/* IFF_DEBUG equivalent */
363 #define	IEEE80211_MSG_DUMPPKTS	0x20000000	/* IFF_LINK2 equivalant */
364 #define	IEEE80211_MSG_CRYPTO	0x10000000	/* crypto work */
365 #define	IEEE80211_MSG_INPUT	0x08000000	/* input handling */
366 #define	IEEE80211_MSG_XRATE	0x04000000	/* rate set handling */
367 #define	IEEE80211_MSG_ELEMID	0x02000000	/* element id parsing */
368 #define	IEEE80211_MSG_NODE	0x01000000	/* node handling */
369 #define	IEEE80211_MSG_ASSOC	0x00800000	/* association handling */
370 #define	IEEE80211_MSG_AUTH	0x00400000	/* authentication handling */
371 #define	IEEE80211_MSG_SCAN	0x00200000	/* scanning */
372 #define	IEEE80211_MSG_OUTPUT	0x00100000	/* output handling */
373 #define	IEEE80211_MSG_STATE	0x00080000	/* state machine */
374 #define	IEEE80211_MSG_POWER	0x00040000	/* power save handling */
375 #define	IEEE80211_MSG_DOT1X	0x00020000	/* 802.1x authenticator */
376 #define	IEEE80211_MSG_DOT1XSM	0x00010000	/* 802.1x state machine */
377 #define	IEEE80211_MSG_RADIUS	0x00008000	/* 802.1x radius client */
378 #define	IEEE80211_MSG_RADDUMP	0x00004000	/* dump 802.1x radius packets */
379 #define	IEEE80211_MSG_RADKEYS	0x00002000	/* dump 802.1x keys */
380 #define	IEEE80211_MSG_WPA	0x00001000	/* WPA/RSN protocol */
381 #define	IEEE80211_MSG_ACL	0x00000800	/* ACL handling */
382 #define	IEEE80211_MSG_WME	0x00000400	/* WME protocol */
383 #define	IEEE80211_MSG_SUPERG	0x00000200	/* Atheros SuperG protocol */
384 #define	IEEE80211_MSG_DOTH	0x00000100	/* 802.11h support */
385 #define	IEEE80211_MSG_INACT	0x00000080	/* inactivity handling */
386 #define	IEEE80211_MSG_ROAM	0x00000040	/* sta-mode roaming */
387 
388 #define	IEEE80211_MSG_ANY	0xffffffff	/* anything */
389 
390 #ifdef IEEE80211_DEBUG
391 #define	ieee80211_msg(_ic, _m)	((_ic)->ic_debug & (_m))
392 #define	IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do {			\
393 	if (ieee80211_msg(_ic, _m))					\
394 		ieee80211_note(_ic, _fmt, __VA_ARGS__);		\
395 } while (0)
396 #define	IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) do {			\
397 	if (ieee80211_msg(_ic, _m))					\
398 		ieee80211_note_mac(_ic, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\
399 } while (0)
400 #define	IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) do {		\
401 	if (ieee80211_msg(_ic, _m))					\
402 		ieee80211_note_mac(_ic, _mac, _fmt, __VA_ARGS__);	\
403 } while (0)
404 #define	IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) do {		\
405 	if (ieee80211_msg(_ic, _m))					\
406 		ieee80211_note_frame(_ic, _wh, _fmt, __VA_ARGS__);	\
407 } while (0)
408 void	ieee80211_note(struct ieee80211com *ic, const char *fmt, ...);
409 void	ieee80211_note_mac(struct ieee80211com *ic,
410 		const u_int8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...);
411 void	ieee80211_note_frame(struct ieee80211com *ic,
412 		const struct ieee80211_frame *wh, const char *fmt, ...);
413 #define	ieee80211_msg_debug(_ic) \
414 	((_ic)->ic_debug & IEEE80211_MSG_DEBUG)
415 #define	ieee80211_msg_dumppkts(_ic) \
416 	((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS)
417 #define	ieee80211_msg_input(_ic) \
418 	((_ic)->ic_debug & IEEE80211_MSG_INPUT)
419 #define	ieee80211_msg_radius(_ic) \
420 	((_ic)->ic_debug & IEEE80211_MSG_RADIUS)
421 #define	ieee80211_msg_dumpradius(_ic) \
422 	((_ic)->ic_debug & IEEE80211_MSG_RADDUMP)
423 #define	ieee80211_msg_dumpradkeys(_ic) \
424 	((_ic)->ic_debug & IEEE80211_MSG_RADKEYS)
425 #define	ieee80211_msg_scan(_ic) \
426 	((_ic)->ic_debug & IEEE80211_MSG_SCAN)
427 #define	ieee80211_msg_assoc(_ic) \
428 	((_ic)->ic_debug & IEEE80211_MSG_ASSOC)
429 #else
430 #define	IEEE80211_DPRINTF(_ic, _m, _fmt, ...)
431 #define	IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...)
432 #define	IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...)
433 #define	ieee80211_msg_dumppkts(_ic)	0
434 #define	ieee80211_msg(_ic, _m)		0
435 #endif
436 
437 #endif /* !_NET80211_IEEE80211_VAR_H_ */
438