1 /* $NetBSD: scsi_spc.h,v 1.7 2022/01/27 18:37:02 jakllsch Exp $ */ 2 3 /*- 4 * Copyright (c) 2005 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * SCSI Primary Commands (SPC) -- 34 * Commands for all device types 35 */ 36 37 /* 38 * Largely written by Julian Elischer (julian@tfs.com) 39 * for TRW Financial Systems. 40 * 41 * TRW Financial Systems, in accordance with their agreement with Carnegie 42 * Mellon University, makes this software available to CMU to distribute 43 * or use in any manner that they see fit as long as this message is kept with 44 * the software. For this reason TFS also grants any other persons or 45 * organisations permission to use or modify this software. 46 * 47 * TFS supplies this software to be publicly redistributed 48 * on the understanding that TFS is not responsible for the correct 49 * functioning of this software in any circumstances. 50 * 51 * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992 52 */ 53 54 #ifndef _DEV_SCSIPI_SCSI_SPC_H_ 55 #define _DEV_SCSIPI_SCSI_SPC_H_ 56 57 /* 58 * EXTENDED COPY 59 */ 60 61 /* 62 * INQUIRY 63 */ 64 65 /* 66 * LOG SELECT 67 */ 68 69 /* 70 * LOG SENSE 71 */ 72 73 /* 74 * MODE SELECT 75 */ 76 77 #define SCSI_MODE_SELECT_6 0x15 78 struct scsi_mode_select_6 { 79 uint8_t opcode; 80 uint8_t byte2; 81 #define SMS_SP 0x01 /* save page */ 82 #define SMS_PF 0x10 /* page format (0 = SCSI-1, 1 = SCSI-2) */ 83 uint8_t reserved[2]; 84 uint8_t length; 85 uint8_t control; 86 }; 87 88 #define SCSI_MODE_SELECT_10 0x55 89 struct scsi_mode_select_10 { 90 uint8_t opcode; 91 uint8_t byte2; /* see MODE SELECT (6) */ 92 uint8_t reserved[5]; 93 uint8_t length[2]; 94 uint8_t control; 95 }; 96 97 /* 98 * MODE SENSE 99 */ 100 101 #define SCSI_MODE_SENSE_6 0x1a 102 struct scsi_mode_sense_6 { 103 uint8_t opcode; 104 uint8_t byte2; 105 #define SMS_DBD 0x08 /* disable block descriptors */ 106 uint8_t page; 107 #define SMS_PAGE_MASK 0x3f 108 #define SMS_PCTRL_MASK 0xc0 109 #define SMS_PCTRL_CURRENT 0x00 110 #define SMS_PCTRL_CHANGEABLE 0x40 111 #define SMS_PCTRL_DEFAULT 0x80 112 #define SMS_PCTRL_SAVED 0xc0 113 uint8_t reserved; 114 uint8_t length; 115 uint8_t control; 116 }; 117 118 #define SCSI_MODE_SENSE_10 0x5a 119 struct scsi_mode_sense_10 { 120 uint8_t opcode; 121 uint8_t byte2; /* see MODE SENSE (6) */ 122 #define SMS_LLBAA 0x10 123 uint8_t page; /* See MODE SENSE (6) */ 124 uint8_t reserved[4]; 125 uint8_t length[2]; 126 uint8_t control; 127 }; 128 129 /* 130 * Page code usage: 131 * 0x00 Vendor-specific (does not require page format) 132 * 0x01 - 0x1f Device-type-specific pages 133 * 0x20 - 0x3e Vendor-specific (page format required) 134 * 0x3f Return all mode pages 135 */ 136 #define SMS_PAGE_ALL_PAGES 0x3f 137 138 /* 139 * Mode parameters are returned in the following format: 140 * 141 * Mode parameter header 142 * Block descriptor(s) [zero or more] 143 * Page(s) [zero or more, variable-length] 144 */ 145 146 struct scsi_mode_parameter_header_6 { 147 uint8_t data_length; 148 uint8_t medium_type; 149 uint8_t dev_spec; 150 uint8_t blk_desc_len; /* unused on ATAPI */ 151 }; 152 153 struct scsi_mode_parameter_header_10 { 154 uint8_t data_length[2]; 155 uint8_t medium_type; 156 uint8_t dev_spec; 157 uint8_t byte5; 158 #define SMPH_LONGLBA 0x01 159 uint8_t reserved; 160 uint8_t blk_desc_len[2]; 161 }; 162 163 struct scsi_general_block_descriptor { 164 uint8_t density; 165 uint8_t nblocks[3]; 166 uint8_t reserved; 167 uint8_t blklen[3]; 168 }; 169 170 struct scsi_da_block_descriptor { 171 uint8_t nblocks[4]; 172 uint8_t density; 173 uint8_t blklen[3]; 174 }; 175 176 struct scsi_longlba_block_descriptor { 177 uint8_t nblocks[8]; 178 uint8_t density; 179 uint8_t reserved[3]; 180 uint8_t blklen[4]; 181 }; 182 183 /* 184 * Header common to all mode parameter pages. 185 */ 186 struct scsi_mode_page_header { 187 uint8_t pg_code; 188 #define PGCODE_MASK 0x3f /* page code mask */ 189 #define PGCODE_PS 0x80 /* page is saveable */ 190 uint8_t pg_length; /* page length (not including header) */ 191 }; 192 193 /* 194 * Control mode page 195 */ 196 #define SCSI_CONTROL_MODE_PAGE 0x0a 197 struct scsi_control_mode_page { 198 uint8_t pg_code; /* 0x0a */ 199 uint8_t pg_length; /* 0x0a */ 200 uint8_t byte3; 201 #define SCMP_RLEC 0x01 /* report log exception condition */ 202 #define SCMP_GLTSD 0x02 /* global logging target save disable */ 203 #define SCMP_TST_mask 0x7 /* task set type */ 204 #define SCMP_TST_shift 5 205 #define SCMP_TST_ALL_INIT 0 /* per LU for all initiators */ 206 #define SCMP_TST_PER_INIT 1 /* per initiator per LU */ 207 uint8_t queue_params; 208 #define SCMP_DQue 0x01 /* disable queueing */ 209 #define SCMP_QErr_mask 0x3 /* queue error management */ 210 #define SCMP_QErr_shift 1 211 #define SCMP_QAM_mask 0xf /* queue algorithm modifier */ 212 #define SCMP_QAM_shift 4 213 #define SCMP_QAM_RESTRICTED 0x0 /* restricted reordering allowed */ 214 #define SCMP_QAM_UNRESTRICTED 0x1 /* unrestricted reordering allowed */ 215 /* 0x2 - 0x7 Reserved */ 216 /* 0x8 - 0xf Vendor-specific */ 217 uint8_t byte5; 218 #define SCMP_EAERP 0x01 219 #define SCMP_UAAERP 0x02 220 #define SCMP_RAERP 0x04 221 #define SCMP_SWP 0x08 222 #define SCMP_RAC 0x40 223 #define SCMP_TAS 0x80 224 uint8_t byte6; 225 #define SCMP_AM_mask 0x7 /* autload mode */ 226 #define SCMP_AM_FULL 0 227 #define SCMP_AM_AUXMEM 1 228 #define SCMP_AM_NOLOAD 2 229 uint8_t rahp[2]; /* ready aer holdoff period */ 230 uint8_t btp[2]; /* busy timeout period */ 231 uint8_t estct[2]; /* extended self-test completion time */ 232 }; 233 234 /* 235 * Disconnect-reconnect page 236 */ 237 #define SCSI_DISCONNECT_RECONNECT_PAGE 0x02 238 struct scsi_disconnect_reconnect_page { 239 uint8_t pg_code; /* 0x02 */ 240 uint8_t pg_length; /* 0x0e */ 241 uint8_t buffer_full_ratio; 242 uint8_t buffer_empty_ratio; 243 uint8_t bus_inactivity_limit[2]; 244 uint8_t disconnect_time_limit[2]; 245 uint8_t connect_time_limit[2]; 246 uint8_t maximum_burst_size[2]; 247 uint8_t flags; 248 #define SDRP_DTDC_mask 0x7 /* data transfer disconnect control */ 249 #define SDRP_DImm 0x08 250 #define SDRP_FA_mask 0x7 251 #define SDRP_FA_shift 4 252 #define SDRP_EMDP 0x80 253 uint8_t reserved; 254 uint8_t first_burst_size[2]; 255 }; 256 257 /* 258 * Informational exceptions control page 259 */ 260 #define SCSI_INFORMATIONAL_EXCEPTIONS_CONTROL_PAGE 0x1c 261 struct scsi_informational_exceptions_control_page { 262 uint8_t pg_code; /* 0x1c */ 263 uint8_t pg_length; /* 0x0a */ 264 uint8_t byte3; 265 #define SIECP_LogErr 0x01 266 #define SIECP_TEST 0x04 267 #define SIECP_DExcpt 0x08 268 #define SIECP_EWasc 0x10 269 #define SIECP_EBF 0x20 270 #define SIECP_PERF 0x80 271 uint8_t byte4; 272 #define SIECP_MRIE_mask 0xf /* method of reporting 273 informational exceptions */ 274 #define SIECP_MRIE_NO_REPORTING 0x00 275 #define SIECP_MRIE_ASYNC_EVENT 0x01 276 #define SIECP_MRIE_UNIT_ATN 0x02 277 #define SIECP_MRIE_COND_RECOV_ERR 0x03 278 #define SIECP_MRIE_UNCOND_RECOV_ERR 0x04 279 #define SIECP_MRIE_NO_SENSE 0x05 280 #define SIECP_MRIE_ON_REQUEST 0x06 281 /* 0x07 - 0x0b reserved */ 282 /* 0x0c - 0x0f Vendor-specific */ 283 uint8_t interval_timer[2]; 284 uint8_t report_count[2]; 285 }; 286 287 /* 288 * Power condition page 289 */ 290 #define SCSI_POWER_CONDITION_PAGE 0x1a 291 struct scsi_power_condition_page { 292 uint8_t pg_code; /* 0x1a */ 293 uint8_t pg_length; /* 0x0a */ 294 uint8_t reserved; 295 uint8_t byte4; 296 #define SPCP_STANDBY 0x01 297 #define SPCP_IDLE 0x02 298 uint8_t idle_timer[2]; /* 100ms increments */ 299 uint8_t standby_timer[2]; /* 100ms increments */ 300 }; 301 302 /* 303 * Protocol specific LUN page 304 */ 305 #define SCSI_PROTOCOL_SPECIFIC_LUN_PAGE 0x18 306 struct scsi_protocol_specific_lun_page { 307 uint8_t pg_code; /* 0x18 */ 308 uint8_t pg_length; /* variable */ 309 uint8_t byte3; 310 #define SPSLP_PROTOCOL_mask 0xf 311 #define SPSLP_PROTOCOL_FCP 0x00 /* Fibre Channel */ 312 #define SPSLP_PROTOCOL_SPI 0x01 /* parallel SCSI */ 313 #define SPSLP_PROTOCOL_SSA 0x02 /* SSA-S2P or SSA-S3P */ 314 #define SPSLP_PROTOCOL_SBP2 0x03 /* IEEE 1394 */ 315 #define SPSLP_PROTOCOL_SRP 0x04 /* SCSI RDMA */ 316 #define SPSLP_PROTOCOL_ISCSI 0x05 /* iSCSI */ 317 /* protocol specific mode parameters follow */ 318 }; 319 320 /* 321 * Protocol specific port page 322 */ 323 #define SCSI_PROTOCOL_SPECIFIC_PORT_PAGE 0x19 324 struct scsi_protocol_specific_port_page { 325 uint8_t pg_code; /* 0x18 */ 326 uint8_t pg_length; /* variable */ 327 uint8_t byte3; /* see SCSI PROTOCOL SPECIFIC LUN PAGE */ 328 /* protocol specific mode parameters follow */ 329 }; 330 331 /* 332 * PERSISTENT RESERVE IN 333 */ 334 335 /* 336 * PERSISTENT RESERVE OUT 337 */ 338 339 /* 340 * PREVENT ALLOW MEDIUM REMOVAL 341 */ 342 343 #define SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e 344 struct scsi_prevent_allow_medium_removal { 345 uint8_t opcode; 346 uint8_t byte2; 347 uint8_t reserved[2]; 348 uint8_t how; 349 #define SPAMR_ALLOW 0x00 350 #define SPAMR_PREVENT_DT 0x01 351 #define SPAMR_PREVENT_MC 0x02 352 #define SPAMR_PREVENT_ALL 0x03 353 uint8_t control; 354 }; 355 356 /* 357 * READ BUFFER 358 */ 359 360 /* 361 * RECEIVE COPY RESULTS 362 */ 363 364 /* 365 * RECEIVE DIAGNOSTIC RESULTS 366 */ 367 368 /* 369 * RESERVE / RELEASE 370 */ 371 372 #define SCSI_RESERVE_6 0x16 373 #define SCSI_RELEASE_6 0x17 374 struct scsi_reserve_release_6 { 375 uint8_t opcode; 376 uint8_t byte2; 377 uint8_t obsolete; 378 uint8_t reserved[2]; 379 uint8_t control; 380 }; 381 382 #define SCSI_RESERVE_10 0x56 383 #define SCSI_RELEASE_10 0x57 384 struct scsi_reserve_release_10 { 385 uint8_t opcode; 386 uint8_t byte2; 387 #define SR_LongID 0x02 388 #define SR_3rdPty 0x10 389 uint8_t obsolete; 390 uint8_t thirdpartyid; 391 uint8_t reserved[3]; 392 uint8_t paramlen[2]; 393 uint8_t control; 394 }; 395 396 struct scsi_reserve_release_10_idparam { 397 uint8_t thirdpartyid[8]; 398 }; 399 400 /* 401 * REPORT DEVICE IDENTIFIER 402 */ 403 404 /* 405 * REPORT LUNS 406 */ 407 #define SCSI_REPORT_LUNS 0xa0 408 409 struct scsi_report_luns { 410 uint8_t opcode; 411 uint8_t reserved1; 412 uint8_t selectreport; 413 #define SELECTREPORT_NORMAL 0x00 414 #define SELECTREPORT_WELLKNOWN 0x01 415 #define SELECTREPORT_ALL 0x02 416 uint8_t reserved3[3]; 417 uint8_t alloclen[4]; 418 uint8_t reserved10; 419 uint8_t control; 420 }; 421 422 struct scsi_report_luns_header { 423 uint8_t length[4]; /* in bytes, not including header */ 424 uint8_t _res4[4]; 425 /* followed by array of: */ 426 }; 427 428 struct scsi_report_luns_lun { 429 uint8_t lun[8]; 430 }; 431 432 /* 433 * MAINTENANCE_IN[REPORT SUPPORTED OPERATION CODES] 434 */ 435 #define SCSI_MAINTENANCE_IN 0xA3 436 437 struct scsi_repsuppopcode { 438 u_int8_t opcode; 439 u_int8_t svcaction; 440 #define RSOC_REPORT_SUPPORTED_OPCODES 0x0C 441 442 u_int8_t repoption; 443 #define RSOC_ALL 0x00 /* report all */ 444 #define RSOC_ONE 0x01 /* report one */ 445 #define RSOC_ONESACD 0x02 /* report one or CHECK CONDITION */ 446 #define RSOC_ONESA 0x03 /* report one mark presense in data */ 447 #define RSOC_RCTD 0x80 /* report timeouts */ 448 449 u_int8_t reqopcode; 450 u_int8_t reqsvcaction[2]; 451 u_int8_t alloclen[4]; 452 u_int8_t _res0; 453 u_int8_t control; 454 }; 455 456 struct scsi_repsupopcode_all_commands_descriptor { 457 u_int8_t opcode; 458 u_int8_t _res0; 459 u_int8_t serviceaction[2]; 460 u_int8_t _res1; 461 u_int8_t flags; 462 #define RSOC_ACD_CTDP 0x02 /* timeouts present */ 463 #define RSOC_ACD_SERVACTV 0x01 /* service action valid */ 464 u_int8_t cdblen[2]; 465 }; 466 467 struct scsi_repsupopcode_one_command_descriptor { 468 u_int8_t _res0; 469 u_int8_t support; 470 #define RSOC_OCD_CTDP 0x80 /* timeouts present */ 471 #define RSOC_OCD_SUP_NOT_AVAIL 0x00 /* not available */ 472 #define RSOC_OCD_SUP_NOT_SUPP 0x01 /* not supported */ 473 #define RSOC_OCD_SUP_SUPP_STD 0x03 /* supported - standard */ 474 #define RSOC_OCD_SUP_SUPP_VENDOR 0x05 /* supported - vendor */ 475 #define RSOC_OCD_SUP 0x07 /* mask for support field */ 476 477 u_int8_t cdblen[2]; 478 /* 479 * u_int8_t usage[0...]- cdblen bytes 480 * usage data 481 */ 482 /* 483 * scsi_repsupopcode_timeouts_descriptor 484 * if RSOC_OCD_CTDP is set 485 */ 486 }; 487 488 struct scsi_repsupopcode_timeouts_descriptor { 489 u_int8_t descriptor_length[2]; 490 u_int8_t _res0; 491 u_int8_t cmd_specific; 492 u_int8_t nom_process_timeout[4]; 493 u_int8_t cmd_process_timeout[4]; 494 }; 495 496 /* 497 * REQUEST SENSE 498 */ 499 500 #define SCSI_REQUEST_SENSE 0x03 501 struct scsi_request_sense { 502 uint8_t opcode; 503 uint8_t byte2; 504 uint8_t reserved[2]; 505 uint8_t length; 506 uint8_t control; 507 }; 508 509 struct scsi_sense_data { 510 /* 1*/ uint8_t response_code; 511 #define SSD_RCODE(x) ((x) & 0x7f) 512 #define SSD_RCODE_CURRENT 0x70 513 #define SSD_RCODE_DEFERRED 0x71 514 #define SSD_RCODE_VALID 0x80 515 /* 2*/ uint8_t segment; /* obsolete */ 516 /* 3*/ uint8_t flags; 517 #define SSD_SENSE_KEY(x) ((x) & 0x0f) 518 #define SSD_ILI 0x20 519 #define SSD_EOM 0x40 520 #define SSD_FILEMARK 0x80 521 /* 7*/ uint8_t info[4]; 522 /* 8*/ uint8_t extra_len; /* Additional sense length */ 523 /*12*/ uint8_t csi[4]; /* Command-specific information */ 524 /*13*/ uint8_t asc; /* Additional sense code */ 525 /*14*/ uint8_t ascq; /* Additional sense code qualifier */ 526 /*15*/ uint8_t fru; /* Field replaceable unit code */ 527 union { 528 uint8_t sks_bytes[3]; 529 530 /* ILLEGAL REQUEST */ 531 struct { 532 uint8_t byte0; 533 #define SSD_SKS_FP_BIT(x) ((x) & 0x7) 534 #define SSD_SKS_FP_BPV 0x08 535 #define SSK_SKS_FP_CD 0x40 /* 1=command, 0=data */ 536 uint8_t val[2]; 537 } field_pointer; 538 539 /* RECOVERED ERROR, HARDWARE ERROR, MEDIUM ERROR */ 540 struct { 541 uint8_t byte0; 542 uint8_t val[2]; 543 } actual_retry_count; 544 545 /* NOT READY, NO SENSE */ 546 struct { 547 uint8_t byte0; 548 uint8_t val[2]; 549 } progress_indication; 550 551 /* COPY ABORTED */ 552 struct { 553 uint8_t byte0; 554 #define SSD_SKS_SP_BIT(x) ((x) & 0x7) 555 #define SSD_SKS_SP_BPV 0x08 556 #define SSD_SKS_SP_SD 0x20 /* 0=param list, 1=segment desc */ 557 uint8_t val[2]; 558 } segment_pointer; 559 /*18*/ } sks; /* Sense-key specific */ 560 #define SSD_SKSV 0x80 /* byte0 of sks field */ 561 /*32*/ uint8_t extra_bytes[14]; /* really variable length */ 562 }; 563 564 /* 565 * Sense bytes described by the extra_len field start at csi[], and can 566 * only continue up to the end of the 32-byte sense structure that we 567 * have defined (which might be too short for some cases). 568 */ 569 #define SSD_ADD_BYTES_LIM(sp) \ 570 ((((int)(sp)->extra_len) < (int)sizeof(struct scsi_sense_data) - 8) ? \ 571 (sp)->extra_len : sizeof(struct scsi_sense_data) - 8) 572 573 #define SKEY_NO_SENSE 0x00 574 #define SKEY_RECOVERED_ERROR 0x01 575 #define SKEY_NOT_READY 0x02 576 #define SKEY_MEDIUM_ERROR 0x03 577 #define SKEY_HARDWARE_ERROR 0x04 578 #define SKEY_ILLEGAL_REQUEST 0x05 579 #define SKEY_UNIT_ATTENTION 0x06 580 #define SKEY_DATA_PROTECT 0x07 581 #define SKEY_BLANK_CHECK 0x08 582 #define SKEY_VENDOR_SPECIFIC 0x09 583 #define SKEY_COPY_ABORTED 0x0a 584 #define SKEY_ABORTED_COMMAND 0x0b 585 #define SKEY_EQUAL 0x0c /* obsolete */ 586 #define SKEY_VOLUME_OVERFLOW 0x0d 587 #define SKEY_MISCOMPARE 0x0e 588 /* 0x0f reserved */ 589 590 /* XXX This is not described in SPC-2. */ 591 struct scsi_sense_data_unextended { 592 uint8_t response_code; 593 uint8_t block[3]; 594 }; 595 596 /* 597 * SEND DIAGNOSTIC 598 */ 599 600 #define SCSI_SEND_DIAGNOSTIC 0x1d 601 struct scsi_send_diagnostic { 602 uint8_t opcode; 603 uint8_t byte2; 604 #define SSD_UnitOffL 0x01 605 #define SSD_DevOffL 0x02 606 #define SSD_SelfTest 0x04 /* standard self-test */ 607 #define SSD_PF 0x10 /* results in page format */ 608 #define SSD_CODE(x) ((x) << 5) 609 /* 610 * Codes: 611 * 612 * 0 This value shall be used when the SelfTest bit is 613 * set to one or if the SEND DIAGNOSTIC command is not 614 * invoking one of the other self-test functions such 615 * as enclosure services or the Translate Address page. 616 * 617 * 1 Background short self-test. Parameter length is 0. 618 * 619 * 2 Background extended self-test. Parameter length is 0. 620 * 621 * 4 Abort background self-test. Parameter length is 0. 622 * 623 * 5 Foreground short self-test. Parameter length is 0. 624 * 625 * 6 Foreground extended self-test. Parameter length is 0. 626 */ 627 uint8_t reserved; 628 uint8_t paramlen[2]; 629 uint8_t control; 630 }; 631 632 /* 633 * SET DEVICE IDENTIFIER 634 */ 635 636 /* 637 * TEST UNIT READY 638 */ 639 640 #define SCSI_TEST_UNIT_READY 0x00 641 struct scsi_test_unit_ready { 642 uint8_t opcode; 643 uint8_t byte2; 644 uint8_t reserved[3]; 645 uint8_t control; 646 }; 647 648 /* 649 * WRITE BUFFER 650 */ 651 652 #endif /* _DEV_SCSIPI_SCSI_SPC_H_ */ 653