1 /** 2 ****************************************************************************** 3 * @file stm32g4xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32g4xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * <h2><center>© Copyright (c) 2019 STMicroelectronics. 12 * All rights reserved.</center></h2> 13 * 14 * This software component is licensed by ST under BSD 3-Clause license, 15 * the "License"; You may not use this file except in compliance with the 16 * License. You may obtain a copy of the License at: 17 * opensource.org/licenses/BSD-3-Clause 18 * 19 ****************************************************************************** 20 */ 21 22 /* Define to prevent recursive inclusion -------------------------------------*/ 23 #ifndef STM32G4xx_HAL_CONF_H 24 #define STM32G4xx_HAL_CONF_H 25 26 #ifdef __cplusplus 27 extern "C" { 28 #endif 29 30 /* Exported types ------------------------------------------------------------*/ 31 /* Exported constants --------------------------------------------------------*/ 32 33 /* ########################## Module Selection ############################## */ 34 /** 35 * @brief This is the list of modules to be used in the HAL driver 36 */ 37 #define HAL_MODULE_ENABLED 38 #define HAL_ADC_MODULE_ENABLED 39 /* #define HAL_COMP_MODULE_ENABLED */ 40 /* #define HAL_CORDIC_MODULE_ENABLED */ 41 #define HAL_CORTEX_MODULE_ENABLED 42 /* #define HAL_CRC_MODULE_ENABLED */ 43 /* #define HAL_CRYP_MODULE_ENABLED */ 44 #define HAL_DAC_MODULE_ENABLED 45 #define HAL_DMA_MODULE_ENABLED 46 /* #define HAL_EXTI_MODULE_ENABLED */ 47 /* #define HAL_FDCAN_MODULE_ENABLED */ 48 #define HAL_FLASH_MODULE_ENABLED 49 #define HAL_FMAC_MODULE_ENABLED 50 #define HAL_GPIO_MODULE_ENABLED 51 /* #define HAL_HRTIM_MODULE_ENABLED */ 52 /* #define HAL_IRDA_MODULE_ENABLED */ 53 #define HAL_IWDG_MODULE_ENABLED 54 #define HAL_I2C_MODULE_ENABLED 55 #define HAL_I2S_MODULE_ENABLED 56 /* #define HAL_LPTIM_MODULE_ENABLED */ 57 /* #define HAL_NAND_MODULE_ENABLED */ 58 /* #define HAL_NOR_MODULE_ENABLED */ 59 /* #define HAL_OPAMP_MODULE_ENABLED */ 60 /* #define HAL_PCD_MODULE_ENABLED */ 61 #define HAL_PWR_MODULE_ENABLED 62 #define HAL_QSPI_MODULE_ENABLED 63 #define HAL_RCC_MODULE_ENABLED 64 #define HAL_RNG_MODULE_ENABLED 65 /* #define HAL_RTC_MODULE_ENABLED */ 66 #define HAL_SAI_MODULE_ENABLED 67 /* #define HAL_SMARTCARD_MODULE_ENABLED */ 68 /* #define HAL_SMBUS_MODULE_ENABLED */ 69 #define HAL_SPI_MODULE_ENABLED 70 /* #define HAL_SRAM_MODULE_ENABLED */ 71 #define HAL_TIM_MODULE_ENABLED 72 #define HAL_UART_MODULE_ENABLED 73 #define HAL_USART_MODULE_ENABLED 74 /* #define HAL_WWDG_MODULE_ENABLED */ 75 76 /* ########################## Register Callbacks selection ############################## */ 77 /** 78 * @brief This is the list of modules where register callback can be used 79 */ 80 81 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 82 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 83 #define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U 84 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U 85 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 86 #define USE_HAL_EXTI_REGISTER_CALLBACKS 0U 87 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U 88 #define USE_HAL_FMAC_REGISTER_CALLBACKS 0U 89 #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U 90 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 91 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U 92 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 93 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U 94 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U 95 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U 96 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 97 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 98 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U 99 #define USE_HAL_RNG_REGISTER_CALLBACKS 0U 100 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 101 #define USE_HAL_SAI_REGISTER_CALLBACKS 0U 102 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 103 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U 104 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 105 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U 106 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 107 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 108 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 109 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 110 111 /* ########################## Oscillator Values adaptation ####################*/ 112 /** 113 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 114 * This value is used by the RCC HAL module to compute the system frequency 115 * (when HSE is used as system clock source, directly or through the PLL). 116 */ 117 #if !defined (HSE_VALUE) 118 #define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ 119 #endif /* HSE_VALUE */ 120 121 #if !defined (HSE_STARTUP_TIMEOUT) 122 #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ 123 #endif /* HSE_STARTUP_TIMEOUT */ 124 125 /** 126 * @brief Internal High Speed oscillator (HSI) value. 127 * This value is used by the RCC HAL module to compute the system frequency 128 * (when HSI is used as system clock source, directly or through the PLL). 129 */ 130 #if !defined (HSI_VALUE) 131 #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ 132 #endif /* HSI_VALUE */ 133 134 /** 135 * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG. 136 * This internal oscillator is mainly dedicated to provide a high precision clock to 137 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 138 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 139 * which is subject to manufacturing process variations. 140 */ 141 #if !defined (HSI48_VALUE) 142 #define HSI48_VALUE (48000000UL) /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz. 143 The real value my vary depending on manufacturing process variations.*/ 144 #endif /* HSI48_VALUE */ 145 146 /** 147 * @brief Internal Low Speed oscillator (LSI) value. 148 */ 149 #if !defined (LSI_VALUE) 150 /*!< Value of the Internal Low Speed oscillator in Hz 151 The real value may vary depending on the variations in voltage and temperature.*/ 152 #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ 153 #endif /* LSI_VALUE */ 154 /** 155 * @brief External Low Speed oscillator (LSE) value. 156 * This value is used by the UART, RTC HAL module to compute the system frequency 157 */ 158 #if !defined (LSE_VALUE) 159 #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ 160 #endif /* LSE_VALUE */ 161 162 #if !defined (LSE_STARTUP_TIMEOUT) 163 #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ 164 #endif /* LSE_STARTUP_TIMEOUT */ 165 166 /** 167 * @brief External clock source for I2S and SAI peripherals 168 * This value is used by the I2S and SAI HAL modules to compute the I2S and SAI clock source 169 * frequency, this source is inserted directly through I2S_CKIN pad. 170 */ 171 #if !defined (EXTERNAL_CLOCK_VALUE) 172 #define EXTERNAL_CLOCK_VALUE (48000UL) /*!< Value of the External clock source in Hz*/ 173 #endif /* EXTERNAL_CLOCK_VALUE */ 174 175 /* Tip: To avoid modifying this file each time you need to use different HSE, 176 === you can define the HSE value in your toolchain compiler preprocessor. */ 177 178 /* ########################### System Configuration ######################### */ 179 /** 180 * @brief This is the HAL system configuration section 181 */ 182 #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ 183 #define TICK_INT_PRIORITY (0x0FUL) /*!< tick interrupt priority */ 184 #define USE_RTOS 0U 185 #define PREFETCH_ENABLE 0U 186 #define INSTRUCTION_CACHE_ENABLE 1U 187 #define DATA_CACHE_ENABLE 1U 188 189 /* ########################## Assert Selection ############################## */ 190 /** 191 * @brief Uncomment the line below to expanse the "assert_param" macro in the 192 * HAL drivers code 193 */ 194 /* #define USE_FULL_ASSERT 1U */ 195 196 /* ################## SPI peripheral configuration ########################## */ 197 198 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 199 * Activated: CRC code is present inside driver 200 * Deactivated: CRC code cleaned from driver 201 */ 202 203 #define USE_SPI_CRC 1U 204 205 /* Includes ------------------------------------------------------------------*/ 206 /** 207 * @brief Include module's header file 208 */ 209 210 #ifdef HAL_RCC_MODULE_ENABLED 211 #include "stm32g4xx_hal_rcc.h" 212 #endif /* HAL_RCC_MODULE_ENABLED */ 213 214 #ifdef HAL_GPIO_MODULE_ENABLED 215 #include "stm32g4xx_hal_gpio.h" 216 #endif /* HAL_GPIO_MODULE_ENABLED */ 217 218 #ifdef HAL_DMA_MODULE_ENABLED 219 #include "stm32g4xx_hal_dma.h" 220 #endif /* HAL_DMA_MODULE_ENABLED */ 221 222 #ifdef HAL_CORTEX_MODULE_ENABLED 223 #include "stm32g4xx_hal_cortex.h" 224 #endif /* HAL_CORTEX_MODULE_ENABLED */ 225 226 #ifdef HAL_ADC_MODULE_ENABLED 227 #include "stm32g4xx_hal_adc.h" 228 #endif /* HAL_ADC_MODULE_ENABLED */ 229 230 #ifdef HAL_COMP_MODULE_ENABLED 231 #include "stm32g4xx_hal_comp.h" 232 #endif /* HAL_COMP_MODULE_ENABLED */ 233 234 #ifdef HAL_CORDIC_MODULE_ENABLED 235 #include "stm32g4xx_hal_cordic.h" 236 #endif /* HAL_CORDIC_MODULE_ENABLED */ 237 238 #ifdef HAL_CRC_MODULE_ENABLED 239 #include "stm32g4xx_hal_crc.h" 240 #endif /* HAL_CRC_MODULE_ENABLED */ 241 242 #ifdef HAL_CRYP_MODULE_ENABLED 243 #include "stm32g4xx_hal_cryp.h" 244 #endif /* HAL_CRYP_MODULE_ENABLED */ 245 246 #ifdef HAL_DAC_MODULE_ENABLED 247 #include "stm32g4xx_hal_dac.h" 248 #endif /* HAL_DAC_MODULE_ENABLED */ 249 250 #ifdef HAL_EXTI_MODULE_ENABLED 251 #include "stm32g4xx_hal_exti.h" 252 #endif /* HAL_EXTI_MODULE_ENABLED */ 253 254 #ifdef HAL_FDCAN_MODULE_ENABLED 255 #include "stm32g4xx_hal_fdcan.h" 256 #endif /* HAL_FDCAN_MODULE_ENABLED */ 257 258 #ifdef HAL_FLASH_MODULE_ENABLED 259 #include "stm32g4xx_hal_flash.h" 260 #endif /* HAL_FLASH_MODULE_ENABLED */ 261 262 #ifdef HAL_FMAC_MODULE_ENABLED 263 #include "stm32g4xx_hal_fmac.h" 264 #endif /* HAL_FMAC_MODULE_ENABLED */ 265 266 #ifdef HAL_HRTIM_MODULE_ENABLED 267 #include "stm32g4xx_hal_hrtim.h" 268 #endif /* HAL_HRTIM_MODULE_ENABLED */ 269 270 #ifdef HAL_IRDA_MODULE_ENABLED 271 #include "stm32g4xx_hal_irda.h" 272 #endif /* HAL_IRDA_MODULE_ENABLED */ 273 274 #ifdef HAL_IWDG_MODULE_ENABLED 275 #include "stm32g4xx_hal_iwdg.h" 276 #endif /* HAL_IWDG_MODULE_ENABLED */ 277 278 #ifdef HAL_I2C_MODULE_ENABLED 279 #include "stm32g4xx_hal_i2c.h" 280 #endif /* HAL_I2C_MODULE_ENABLED */ 281 282 #ifdef HAL_I2S_MODULE_ENABLED 283 #include "stm32g4xx_hal_i2s.h" 284 #endif /* HAL_I2S_MODULE_ENABLED */ 285 286 #ifdef HAL_LPTIM_MODULE_ENABLED 287 #include "stm32g4xx_hal_lptim.h" 288 #endif /* HAL_LPTIM_MODULE_ENABLED */ 289 290 #ifdef HAL_NAND_MODULE_ENABLED 291 #include "stm32g4xx_hal_nand.h" 292 #endif /* HAL_NAND_MODULE_ENABLED */ 293 294 #ifdef HAL_NOR_MODULE_ENABLED 295 #include "stm32g4xx_hal_nor.h" 296 #endif /* HAL_NOR_MODULE_ENABLED */ 297 298 #ifdef HAL_OPAMP_MODULE_ENABLED 299 #include "stm32g4xx_hal_opamp.h" 300 #endif /* HAL_OPAMP_MODULE_ENABLED */ 301 302 #ifdef HAL_PCD_MODULE_ENABLED 303 #include "stm32g4xx_hal_pcd.h" 304 #endif /* HAL_PCD_MODULE_ENABLED */ 305 306 #ifdef HAL_PWR_MODULE_ENABLED 307 #include "stm32g4xx_hal_pwr.h" 308 #endif /* HAL_PWR_MODULE_ENABLED */ 309 310 #ifdef HAL_QSPI_MODULE_ENABLED 311 #include "stm32g4xx_hal_qspi.h" 312 #endif /* HAL_QSPI_MODULE_ENABLED */ 313 314 #ifdef HAL_RNG_MODULE_ENABLED 315 #include "stm32g4xx_hal_rng.h" 316 #endif /* HAL_RNG_MODULE_ENABLED */ 317 318 #ifdef HAL_RTC_MODULE_ENABLED 319 #include "stm32g4xx_hal_rtc.h" 320 #endif /* HAL_RTC_MODULE_ENABLED */ 321 322 #ifdef HAL_SAI_MODULE_ENABLED 323 #include "stm32g4xx_hal_sai.h" 324 #endif /* HAL_SAI_MODULE_ENABLED */ 325 326 #ifdef HAL_SMARTCARD_MODULE_ENABLED 327 #include "stm32g4xx_hal_smartcard.h" 328 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 329 330 #ifdef HAL_SMBUS_MODULE_ENABLED 331 #include "stm32g4xx_hal_smbus.h" 332 #endif /* HAL_SMBUS_MODULE_ENABLED */ 333 334 #ifdef HAL_SPI_MODULE_ENABLED 335 #include "stm32g4xx_hal_spi.h" 336 #endif /* HAL_SPI_MODULE_ENABLED */ 337 338 #ifdef HAL_SRAM_MODULE_ENABLED 339 #include "stm32g4xx_hal_sram.h" 340 #endif /* HAL_SRAM_MODULE_ENABLED */ 341 342 #ifdef HAL_TIM_MODULE_ENABLED 343 #include "stm32g4xx_hal_tim.h" 344 #endif /* HAL_TIM_MODULE_ENABLED */ 345 346 #ifdef HAL_UART_MODULE_ENABLED 347 #include "stm32g4xx_hal_uart.h" 348 #endif /* HAL_UART_MODULE_ENABLED */ 349 350 #ifdef HAL_USART_MODULE_ENABLED 351 #include "stm32g4xx_hal_usart.h" 352 #endif /* HAL_USART_MODULE_ENABLED */ 353 354 #ifdef HAL_WWDG_MODULE_ENABLED 355 #include "stm32g4xx_hal_wwdg.h" 356 #endif /* HAL_WWDG_MODULE_ENABLED */ 357 358 /* Exported macro ------------------------------------------------------------*/ 359 #ifdef USE_FULL_ASSERT 360 /** 361 * @brief The assert_param macro is used for function's parameters check. 362 * @param expr: If expr is false, it calls assert_failed function 363 * which reports the name of the source file and the source 364 * line number of the call that failed. 365 * If expr is true, it returns no value. 366 * @retval None 367 */ 368 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 369 /* Exported functions ------------------------------------------------------- */ 370 void assert_failed(uint8_t *file, uint32_t line); 371 #else 372 #define assert_param(expr) ((void)0U) 373 #endif /* USE_FULL_ASSERT */ 374 375 #ifdef __cplusplus 376 } 377 #endif 378 379 #endif /* STM32G4xx_HAL_CONF_H */ 380 381 382 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 383