xref: /linux/include/uapi/linux/vhost_types.h (revision 4398776f)
1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 #ifndef _LINUX_VHOST_TYPES_H
3 #define _LINUX_VHOST_TYPES_H
4 /* Userspace interface for in-kernel virtio accelerators. */
5 
6 /* vhost is used to reduce the number of system calls involved in virtio.
7  *
8  * Existing virtio net code is used in the guest without modification.
9  *
10  * This header includes interface used by userspace hypervisor for
11  * device configuration.
12  */
13 
14 #include <linux/types.h>
15 #include <linux/compiler.h>
16 #include <linux/virtio_config.h>
17 #include <linux/virtio_ring.h>
18 
19 struct vhost_vring_state {
20 	unsigned int index;
21 	unsigned int num;
22 };
23 
24 struct vhost_vring_file {
25 	unsigned int index;
26 	int fd; /* Pass -1 to unbind from file. */
27 
28 };
29 
30 struct vhost_vring_addr {
31 	unsigned int index;
32 	/* Option flags. */
33 	unsigned int flags;
34 	/* Flag values: */
35 	/* Whether log address is valid. If set enables logging. */
36 #define VHOST_VRING_F_LOG 0
37 
38 	/* Start of array of descriptors (virtually contiguous) */
39 	__u64 desc_user_addr;
40 	/* Used structure address. Must be 32 bit aligned */
41 	__u64 used_user_addr;
42 	/* Available structure address. Must be 16 bit aligned */
43 	__u64 avail_user_addr;
44 	/* Logging support. */
45 	/* Log writes to used structure, at offset calculated from specified
46 	 * address. Address must be 32 bit aligned. */
47 	__u64 log_guest_addr;
48 };
49 
50 struct vhost_worker_state {
51 	/*
52 	 * For VHOST_NEW_WORKER the kernel will return the new vhost_worker id.
53 	 * For VHOST_FREE_WORKER this must be set to the id of the vhost_worker
54 	 * to free.
55 	 */
56 	unsigned int worker_id;
57 };
58 
59 struct vhost_vring_worker {
60 	/* vring index */
61 	unsigned int index;
62 	/* The id of the vhost_worker returned from VHOST_NEW_WORKER */
63 	unsigned int worker_id;
64 };
65 
66 /* no alignment requirement */
67 struct vhost_iotlb_msg {
68 	__u64 iova;
69 	__u64 size;
70 	__u64 uaddr;
71 #define VHOST_ACCESS_RO      0x1
72 #define VHOST_ACCESS_WO      0x2
73 #define VHOST_ACCESS_RW      0x3
74 	__u8 perm;
75 #define VHOST_IOTLB_MISS           1
76 #define VHOST_IOTLB_UPDATE         2
77 #define VHOST_IOTLB_INVALIDATE     3
78 #define VHOST_IOTLB_ACCESS_FAIL    4
79 /*
80  * VHOST_IOTLB_BATCH_BEGIN and VHOST_IOTLB_BATCH_END allow modifying
81  * multiple mappings in one go: beginning with
82  * VHOST_IOTLB_BATCH_BEGIN, followed by any number of
83  * VHOST_IOTLB_UPDATE messages, and ending with VHOST_IOTLB_BATCH_END.
84  * When one of these two values is used as the message type, the rest
85  * of the fields in the message are ignored. There's no guarantee that
86  * these changes take place automatically in the device.
87  */
88 #define VHOST_IOTLB_BATCH_BEGIN    5
89 #define VHOST_IOTLB_BATCH_END      6
90 	__u8 type;
91 };
92 
93 #define VHOST_IOTLB_MSG 0x1
94 #define VHOST_IOTLB_MSG_V2 0x2
95 
96 struct vhost_msg {
97 	int type;
98 	union {
99 		struct vhost_iotlb_msg iotlb;
100 		__u8 padding[64];
101 	};
102 };
103 
104 struct vhost_msg_v2 {
105 	__u32 type;
106 	__u32 asid;
107 	union {
108 		struct vhost_iotlb_msg iotlb;
109 		__u8 padding[64];
110 	};
111 };
112 
113 struct vhost_memory_region {
114 	__u64 guest_phys_addr;
115 	__u64 memory_size; /* bytes */
116 	__u64 userspace_addr;
117 	__u64 flags_padding; /* No flags are currently specified. */
118 };
119 
120 /* All region addresses and sizes must be 4K aligned. */
121 #define VHOST_PAGE_SIZE 0x1000
122 
123 struct vhost_memory {
124 	__u32 nregions;
125 	__u32 padding;
126 	struct vhost_memory_region regions[];
127 };
128 
129 /* VHOST_SCSI specific definitions */
130 
131 /*
132  * Used by QEMU userspace to ensure a consistent vhost-scsi ABI.
133  *
134  * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate +
135  *            RFC-v2 vhost-scsi userspace.  Add GET_ABI_VERSION ioctl usage
136  * ABI Rev 1: January 2013. Ignore vhost_tpgt field in struct vhost_scsi_target.
137  *            All the targets under vhost_wwpn can be seen and used by guset.
138  */
139 
140 #define VHOST_SCSI_ABI_VERSION	1
141 
142 struct vhost_scsi_target {
143 	int abi_version;
144 	char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */
145 	unsigned short vhost_tpgt;
146 	unsigned short reserved;
147 };
148 
149 /* VHOST_VDPA specific definitions */
150 
151 struct vhost_vdpa_config {
152 	__u32 off;
153 	__u32 len;
154 	__u8 buf[];
155 };
156 
157 /* vhost vdpa IOVA range
158  * @first: First address that can be mapped by vhost-vDPA
159  * @last: Last address that can be mapped by vhost-vDPA
160  */
161 struct vhost_vdpa_iova_range {
162 	__u64 first;
163 	__u64 last;
164 };
165 
166 /* Feature bits */
167 /* Log all write descriptors. Can be changed while device is active. */
168 #define VHOST_F_LOG_ALL 26
169 /* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
170 #define VHOST_NET_F_VIRTIO_NET_HDR 27
171 
172 /* Use message type V2 */
173 #define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
174 /* IOTLB can accept batching hints */
175 #define VHOST_BACKEND_F_IOTLB_BATCH  0x2
176 /* IOTLB can accept address space identifier through V2 type of IOTLB
177  * message
178  */
179 #define VHOST_BACKEND_F_IOTLB_ASID  0x3
180 /* Device can be suspended */
181 #define VHOST_BACKEND_F_SUSPEND  0x4
182 /* Device can be resumed */
183 #define VHOST_BACKEND_F_RESUME  0x5
184 /* Device supports the driver enabling virtqueues both before and after
185  * DRIVER_OK
186  */
187 #define VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK  0x6
188 /* Device may expose the virtqueue's descriptor area, driver area and
189  * device area to a different group for ASID binding than where its
190  * buffers may reside. Requires VHOST_BACKEND_F_IOTLB_ASID.
191  */
192 #define VHOST_BACKEND_F_DESC_ASID    0x7
193 /* IOTLB don't flush memory mapping across device reset */
194 #define VHOST_BACKEND_F_IOTLB_PERSIST  0x8
195 
196 #endif
197