1 /* $NetBSD: job.h,v 1.42 2013/07/05 22:14:56 sjg Exp $ */ 2 3 /* 4 * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * Adam de Boor. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of the University nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * from: @(#)job.h 8.1 (Berkeley) 6/6/93 35 */ 36 37 /* 38 * Copyright (c) 1988, 1989 by Adam de Boor 39 * Copyright (c) 1989 by Berkeley Softworks 40 * All rights reserved. 41 * 42 * This code is derived from software contributed to Berkeley by 43 * Adam de Boor. 44 * 45 * Redistribution and use in source and binary forms, with or without 46 * modification, are permitted provided that the following conditions 47 * are met: 48 * 1. Redistributions of source code must retain the above copyright 49 * notice, this list of conditions and the following disclaimer. 50 * 2. Redistributions in binary form must reproduce the above copyright 51 * notice, this list of conditions and the following disclaimer in the 52 * documentation and/or other materials provided with the distribution. 53 * 3. All advertising materials mentioning features or use of this software 54 * must display the following acknowledgement: 55 * This product includes software developed by the University of 56 * California, Berkeley and its contributors. 57 * 4. Neither the name of the University nor the names of its contributors 58 * may be used to endorse or promote products derived from this software 59 * without specific prior written permission. 60 * 61 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 62 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 63 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 64 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 65 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 66 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 67 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 68 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 69 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 70 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 71 * SUCH DAMAGE. 72 * 73 * from: @(#)job.h 8.1 (Berkeley) 6/6/93 74 */ 75 76 /*- 77 * job.h -- 78 * Definitions pertaining to the running of jobs in parallel mode. 79 */ 80 #ifndef _JOB_H_ 81 #define _JOB_H_ 82 83 #define TMPPAT "makeXXXXXX" /* relative to tmpdir */ 84 85 #ifdef USE_SELECT 86 /* 87 * Emulate poll() in terms of select(). This is not a complete 88 * emulation but it is sufficient for make's purposes. 89 */ 90 91 #define poll emul_poll 92 #define pollfd emul_pollfd 93 94 struct emul_pollfd { 95 int fd; 96 short events; 97 short revents; 98 }; 99 100 #define POLLIN 0x0001 101 #define POLLOUT 0x0004 102 103 int 104 emul_poll(struct pollfd *fd, int nfd, int timeout); 105 #endif 106 107 /* 108 * The POLL_MSEC constant determines the maximum number of milliseconds spent 109 * in poll before coming out to see if a child has finished. 110 */ 111 #define POLL_MSEC 5000 112 113 114 /*- 115 * Job Table definitions. 116 * 117 * Each job has several things associated with it: 118 * 1) The process id of the child shell 119 * 2) The graph node describing the target being made by this job 120 * 3) A LstNode for the first command to be saved after the job 121 * completes. This is NULL if there was no "..." in the job's 122 * commands. 123 * 4) An FILE* for writing out the commands. This is only 124 * used before the job is actually started. 125 * 5) The output is being caught via a pipe and 126 * the descriptors of our pipe, an array in which output is line 127 * buffered and the current position in that buffer are all 128 * maintained for each job. 129 * 6) A word of flags which determine how the module handles errors, 130 * echoing, etc. for the job 131 * 132 * When a job is finished, the Make_Update function is called on each of the 133 * parents of the node which was just remade. This takes care of the upward 134 * traversal of the dependency graph. 135 */ 136 struct pollfd; 137 138 139 #ifdef USE_META 140 # include "meta.h" 141 #endif 142 143 #define JOB_BUFSIZE 1024 144 typedef struct Job { 145 int pid; /* The child's process ID */ 146 GNode *node; /* The target the child is making */ 147 LstNode tailCmds; /* The node of the first command to be 148 * saved when the job has been run */ 149 FILE *cmdFILE; /* When creating the shell script, this is 150 * where the commands go */ 151 int exit_status; /* from wait4() in signal handler */ 152 char job_state; /* status of the job entry */ 153 #define JOB_ST_FREE 0 /* Job is available */ 154 #define JOB_ST_SETUP 1 /* Job is allocated but otherwise invalid */ 155 #define JOB_ST_RUNNING 3 /* Job is running, pid valid */ 156 #define JOB_ST_FINISHED 4 /* Job is done (ie after SIGCHILD) */ 157 char job_suspended; 158 short flags; /* Flags to control treatment of job */ 159 #define JOB_IGNERR 0x001 /* Ignore non-zero exits */ 160 #define JOB_SILENT 0x002 /* no output */ 161 #define JOB_SPECIAL 0x004 /* Target is a special one. i.e. run it locally 162 * if we can't export it and maxLocal is 0 */ 163 #define JOB_IGNDOTS 0x008 /* Ignore "..." lines when processing 164 * commands */ 165 #define JOB_TRACED 0x400 /* we've sent 'set -x' */ 166 167 int jobPipe[2]; /* Pipe for readind output from job */ 168 struct pollfd *inPollfd; /* pollfd associated with inPipe */ 169 char outBuf[JOB_BUFSIZE + 1]; 170 /* Buffer for storing the output of the 171 * job, line by line */ 172 int curPos; /* Current position in op_outBuf */ 173 174 #ifdef USE_META 175 struct BuildMon bm; 176 #endif 177 } Job; 178 179 #define inPipe jobPipe[0] 180 #define outPipe jobPipe[1] 181 182 183 /*- 184 * Shell Specifications: 185 * Each shell type has associated with it the following information: 186 * 1) The string which must match the last character of the shell name 187 * for the shell to be considered of this type. The longest match 188 * wins. 189 * 2) A command to issue to turn off echoing of command lines 190 * 3) A command to issue to turn echoing back on again 191 * 4) What the shell prints, and its length, when given the echo-off 192 * command. This line will not be printed when received from the shell 193 * 5) A boolean to tell if the shell has the ability to control 194 * error checking for individual commands. 195 * 6) The string to turn this checking on. 196 * 7) The string to turn it off. 197 * 8) The command-flag to give to cause the shell to start echoing 198 * commands right away. 199 * 9) The command-flag to cause the shell to Lib_Exit when an error is 200 * detected in one of the commands. 201 * 202 * Some special stuff goes on if a shell doesn't have error control. In such 203 * a case, errCheck becomes a printf template for echoing the command, 204 * should echoing be on and ignErr becomes another printf template for 205 * executing the command while ignoring the return status. Finally errOut 206 * is a printf template for running the command and causing the shell to 207 * exit on error. If any of these strings are empty when hasErrCtl is FALSE, 208 * the command will be executed anyway as is and if it causes an error, so be 209 * it. Any templates setup to echo the command will escape any '$ ` \ "'i 210 * characters in the command string to avoid common problems with 211 * echo "%s\n" as a template. 212 */ 213 typedef struct Shell { 214 const char *name; /* the name of the shell. For Bourne and C 215 * shells, this is used only to find the 216 * shell description when used as the single 217 * source of a .SHELL target. For user-defined 218 * shells, this is the full path of the shell. 219 */ 220 Boolean hasEchoCtl; /* True if both echoOff and echoOn defined */ 221 const char *echoOff; /* command to turn off echo */ 222 const char *echoOn; /* command to turn it back on again */ 223 const char *noPrint; /* command to skip when printing output from 224 * shell. This is usually the command which 225 * was executed to turn off echoing */ 226 int noPLen; /* length of noPrint command */ 227 Boolean hasErrCtl; /* set if can control error checking for 228 * individual commands */ 229 const char *errCheck; /* string to turn error checking on */ 230 const char *ignErr; /* string to turn off error checking */ 231 const char *errOut; /* string to use for testing exit code */ 232 const char *newline; /* string literal that results in a newline 233 * character when it appears outside of any 234 * 'quote' or "quote" characters */ 235 char commentChar; /* character used by shell for comment lines */ 236 237 /* 238 * command-line flags 239 */ 240 const char *echo; /* echo commands */ 241 const char *exit; /* exit on error */ 242 } Shell; 243 244 extern const char *shellPath; 245 extern const char *shellName; 246 extern char *shellErrFlag; 247 248 extern int jobTokensRunning; /* tokens currently "out" */ 249 extern int maxJobs; /* Max jobs we can run */ 250 251 void Shell_Init(void); 252 const char *Shell_GetNewline(void); 253 void Job_Touch(GNode *, Boolean); 254 Boolean Job_CheckCommands(GNode *, void (*abortProc )(const char *, ...)); 255 #define CATCH_BLOCK 1 256 void Job_CatchChildren(void); 257 void Job_CatchOutput(void); 258 void Job_Make(GNode *); 259 void Job_Init(void); 260 Boolean Job_Full(void); 261 Boolean Job_Empty(void); 262 ReturnStatus Job_ParseShell(char *); 263 int Job_Finish(void); 264 void Job_End(void); 265 void Job_Wait(void); 266 void Job_AbortAll(void); 267 void JobFlagForMigration(int); 268 void Job_TokenReturn(void); 269 Boolean Job_TokenWithdraw(void); 270 void Job_ServerStart(int, int, int); 271 void Job_SetPrefix(void); 272 Boolean Job_RunTarget(const char *, const char *); 273 274 #endif /* _JOB_H_ */ 275