xref: /linux/include/linux/mii.h (revision aa9fbc5d)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * linux/mii.h: definitions for MII-compatible transceivers
4  * Originally drivers/net/sunhme.h.
5  *
6  * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
7  */
8 #ifndef __LINUX_MII_H__
9 #define __LINUX_MII_H__
10 
11 
12 #include <linux/if.h>
13 #include <linux/linkmode.h>
14 #include <uapi/linux/mii.h>
15 
16 struct ethtool_cmd;
17 
18 struct mii_if_info {
19 	int phy_id;
20 	int advertising;
21 	int phy_id_mask;
22 	int reg_num_mask;
23 
24 	unsigned int full_duplex : 1;	/* is full duplex? */
25 	unsigned int force_media : 1;	/* is autoneg. disabled? */
26 	unsigned int supports_gmii : 1; /* are GMII registers supported? */
27 
28 	struct net_device *dev;
29 	int (*mdio_read) (struct net_device *dev, int phy_id, int location);
30 	void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
31 };
32 
33 extern int mii_link_ok (struct mii_if_info *mii);
34 extern int mii_nway_restart (struct mii_if_info *mii);
35 extern void mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
36 extern void mii_ethtool_get_link_ksettings(
37 	struct mii_if_info *mii, struct ethtool_link_ksettings *cmd);
38 extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
39 extern int mii_ethtool_set_link_ksettings(
40 	struct mii_if_info *mii, const struct ethtool_link_ksettings *cmd);
41 extern int mii_check_gmii_support(struct mii_if_info *mii);
42 extern void mii_check_link (struct mii_if_info *mii);
43 extern unsigned int mii_check_media (struct mii_if_info *mii,
44 				     unsigned int ok_to_print,
45 				     unsigned int init_media);
46 extern int generic_mii_ioctl(struct mii_if_info *mii_if,
47 			     struct mii_ioctl_data *mii_data, int cmd,
48 			     unsigned int *duplex_changed);
49 
50 
if_mii(struct ifreq * rq)51 static inline struct mii_ioctl_data *if_mii(struct ifreq *rq)
52 {
53 	return (struct mii_ioctl_data *) &rq->ifr_ifru;
54 }
55 
56 /**
57  * mii_nway_result
58  * @negotiated: value of MII ANAR and'd with ANLPAR
59  *
60  * Given a set of MII abilities, check each bit and returns the
61  * currently supported media, in the priority order defined by
62  * IEEE 802.3u.  We use LPA_xxx constants but note this is not the
63  * value of LPA solely, as described above.
64  *
65  * The one exception to IEEE 802.3u is that 100baseT4 is placed
66  * between 100T-full and 100T-half.  If your phy does not support
67  * 100T4 this is fine.  If your phy places 100T4 elsewhere in the
68  * priority order, you will need to roll your own function.
69  */
mii_nway_result(unsigned int negotiated)70 static inline unsigned int mii_nway_result (unsigned int negotiated)
71 {
72 	unsigned int ret;
73 
74 	if (negotiated & LPA_100FULL)
75 		ret = LPA_100FULL;
76 	else if (negotiated & LPA_100BASE4)
77 		ret = LPA_100BASE4;
78 	else if (negotiated & LPA_100HALF)
79 		ret = LPA_100HALF;
80 	else if (negotiated & LPA_10FULL)
81 		ret = LPA_10FULL;
82 	else
83 		ret = LPA_10HALF;
84 
85 	return ret;
86 }
87 
88 /**
89  * mii_duplex
90  * @duplex_lock: Non-zero if duplex is locked at full
91  * @negotiated: value of MII ANAR and'd with ANLPAR
92  *
93  * A small helper function for a common case.  Returns one
94  * if the media is operating or locked at full duplex, and
95  * returns zero otherwise.
96  */
mii_duplex(unsigned int duplex_lock,unsigned int negotiated)97 static inline unsigned int mii_duplex (unsigned int duplex_lock,
98 				       unsigned int negotiated)
99 {
100 	if (duplex_lock)
101 		return 1;
102 	if (mii_nway_result(negotiated) & LPA_DUPLEX)
103 		return 1;
104 	return 0;
105 }
106 
107 /**
108  * ethtool_adv_to_mii_adv_t
109  * @ethadv: the ethtool advertisement settings
110  *
111  * A small helper function that translates ethtool advertisement
112  * settings to phy autonegotiation advertisements for the
113  * MII_ADVERTISE register.
114  */
ethtool_adv_to_mii_adv_t(u32 ethadv)115 static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
116 {
117 	u32 result = 0;
118 
119 	if (ethadv & ADVERTISED_10baseT_Half)
120 		result |= ADVERTISE_10HALF;
121 	if (ethadv & ADVERTISED_10baseT_Full)
122 		result |= ADVERTISE_10FULL;
123 	if (ethadv & ADVERTISED_100baseT_Half)
124 		result |= ADVERTISE_100HALF;
125 	if (ethadv & ADVERTISED_100baseT_Full)
126 		result |= ADVERTISE_100FULL;
127 	if (ethadv & ADVERTISED_Pause)
128 		result |= ADVERTISE_PAUSE_CAP;
129 	if (ethadv & ADVERTISED_Asym_Pause)
130 		result |= ADVERTISE_PAUSE_ASYM;
131 
132 	return result;
133 }
134 
135 /**
136  * linkmode_adv_to_mii_adv_t
137  * @advertising: the linkmode advertisement settings
138  *
139  * A small helper function that translates linkmode advertisement
140  * settings to phy autonegotiation advertisements for the
141  * MII_ADVERTISE register.
142  */
linkmode_adv_to_mii_adv_t(const unsigned long * advertising)143 static inline u32 linkmode_adv_to_mii_adv_t(const unsigned long *advertising)
144 {
145 	u32 result = 0;
146 
147 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, advertising))
148 		result |= ADVERTISE_10HALF;
149 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, advertising))
150 		result |= ADVERTISE_10FULL;
151 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, advertising))
152 		result |= ADVERTISE_100HALF;
153 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, advertising))
154 		result |= ADVERTISE_100FULL;
155 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising))
156 		result |= ADVERTISE_PAUSE_CAP;
157 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising))
158 		result |= ADVERTISE_PAUSE_ASYM;
159 
160 	return result;
161 }
162 
163 /**
164  * mii_adv_to_ethtool_adv_t
165  * @adv: value of the MII_ADVERTISE register
166  *
167  * A small helper function that translates MII_ADVERTISE bits
168  * to ethtool advertisement settings.
169  */
mii_adv_to_ethtool_adv_t(u32 adv)170 static inline u32 mii_adv_to_ethtool_adv_t(u32 adv)
171 {
172 	u32 result = 0;
173 
174 	if (adv & ADVERTISE_10HALF)
175 		result |= ADVERTISED_10baseT_Half;
176 	if (adv & ADVERTISE_10FULL)
177 		result |= ADVERTISED_10baseT_Full;
178 	if (adv & ADVERTISE_100HALF)
179 		result |= ADVERTISED_100baseT_Half;
180 	if (adv & ADVERTISE_100FULL)
181 		result |= ADVERTISED_100baseT_Full;
182 	if (adv & ADVERTISE_PAUSE_CAP)
183 		result |= ADVERTISED_Pause;
184 	if (adv & ADVERTISE_PAUSE_ASYM)
185 		result |= ADVERTISED_Asym_Pause;
186 
187 	return result;
188 }
189 
190 /**
191  * ethtool_adv_to_mii_ctrl1000_t
192  * @ethadv: the ethtool advertisement settings
193  *
194  * A small helper function that translates ethtool advertisement
195  * settings to phy autonegotiation advertisements for the
196  * MII_CTRL1000 register when in 1000T mode.
197  */
ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)198 static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
199 {
200 	u32 result = 0;
201 
202 	if (ethadv & ADVERTISED_1000baseT_Half)
203 		result |= ADVERTISE_1000HALF;
204 	if (ethadv & ADVERTISED_1000baseT_Full)
205 		result |= ADVERTISE_1000FULL;
206 
207 	return result;
208 }
209 
210 /**
211  * linkmode_adv_to_mii_ctrl1000_t
212  * @advertising: the linkmode advertisement settings
213  *
214  * A small helper function that translates linkmode advertisement
215  * settings to phy autonegotiation advertisements for the
216  * MII_CTRL1000 register when in 1000T mode.
217  */
218 static inline u32
linkmode_adv_to_mii_ctrl1000_t(const unsigned long * advertising)219 linkmode_adv_to_mii_ctrl1000_t(const unsigned long *advertising)
220 {
221 	u32 result = 0;
222 
223 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
224 			      advertising))
225 		result |= ADVERTISE_1000HALF;
226 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
227 			      advertising))
228 		result |= ADVERTISE_1000FULL;
229 
230 	return result;
231 }
232 
233 /**
234  * mii_ctrl1000_to_ethtool_adv_t
235  * @adv: value of the MII_CTRL1000 register
236  *
237  * A small helper function that translates MII_CTRL1000
238  * bits, when in 1000Base-T mode, to ethtool
239  * advertisement settings.
240  */
mii_ctrl1000_to_ethtool_adv_t(u32 adv)241 static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv)
242 {
243 	u32 result = 0;
244 
245 	if (adv & ADVERTISE_1000HALF)
246 		result |= ADVERTISED_1000baseT_Half;
247 	if (adv & ADVERTISE_1000FULL)
248 		result |= ADVERTISED_1000baseT_Full;
249 
250 	return result;
251 }
252 
253 /**
254  * mii_lpa_to_ethtool_lpa_t
255  * @adv: value of the MII_LPA register
256  *
257  * A small helper function that translates MII_LPA
258  * bits, when in 1000Base-T mode, to ethtool
259  * LP advertisement settings.
260  */
mii_lpa_to_ethtool_lpa_t(u32 lpa)261 static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa)
262 {
263 	u32 result = 0;
264 
265 	if (lpa & LPA_LPACK)
266 		result |= ADVERTISED_Autoneg;
267 
268 	return result | mii_adv_to_ethtool_adv_t(lpa);
269 }
270 
271 /**
272  * mii_stat1000_to_ethtool_lpa_t
273  * @adv: value of the MII_STAT1000 register
274  *
275  * A small helper function that translates MII_STAT1000
276  * bits, when in 1000Base-T mode, to ethtool
277  * advertisement settings.
278  */
mii_stat1000_to_ethtool_lpa_t(u32 lpa)279 static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa)
280 {
281 	u32 result = 0;
282 
283 	if (lpa & LPA_1000HALF)
284 		result |= ADVERTISED_1000baseT_Half;
285 	if (lpa & LPA_1000FULL)
286 		result |= ADVERTISED_1000baseT_Full;
287 
288 	return result;
289 }
290 
291 /**
292  * mii_stat1000_mod_linkmode_lpa_t
293  * @advertising: target the linkmode advertisement settings
294  * @adv: value of the MII_STAT1000 register
295  *
296  * A small helper function that translates MII_STAT1000 bits, when in
297  * 1000Base-T mode, to linkmode advertisement settings. Other bits in
298  * advertising are not changes.
299  */
mii_stat1000_mod_linkmode_lpa_t(unsigned long * advertising,u32 lpa)300 static inline void mii_stat1000_mod_linkmode_lpa_t(unsigned long *advertising,
301 						   u32 lpa)
302 {
303 	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
304 			 advertising, lpa & LPA_1000HALF);
305 
306 	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
307 			 advertising, lpa & LPA_1000FULL);
308 }
309 
310 /**
311  * ethtool_adv_to_mii_adv_x
312  * @ethadv: the ethtool advertisement settings
313  *
314  * A small helper function that translates ethtool advertisement
315  * settings to phy autonegotiation advertisements for the
316  * MII_CTRL1000 register when in 1000Base-X mode.
317  */
ethtool_adv_to_mii_adv_x(u32 ethadv)318 static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv)
319 {
320 	u32 result = 0;
321 
322 	if (ethadv & ADVERTISED_1000baseT_Half)
323 		result |= ADVERTISE_1000XHALF;
324 	if (ethadv & ADVERTISED_1000baseT_Full)
325 		result |= ADVERTISE_1000XFULL;
326 	if (ethadv & ADVERTISED_Pause)
327 		result |= ADVERTISE_1000XPAUSE;
328 	if (ethadv & ADVERTISED_Asym_Pause)
329 		result |= ADVERTISE_1000XPSE_ASYM;
330 
331 	return result;
332 }
333 
334 /**
335  * mii_adv_to_ethtool_adv_x
336  * @adv: value of the MII_CTRL1000 register
337  *
338  * A small helper function that translates MII_CTRL1000
339  * bits, when in 1000Base-X mode, to ethtool
340  * advertisement settings.
341  */
mii_adv_to_ethtool_adv_x(u32 adv)342 static inline u32 mii_adv_to_ethtool_adv_x(u32 adv)
343 {
344 	u32 result = 0;
345 
346 	if (adv & ADVERTISE_1000XHALF)
347 		result |= ADVERTISED_1000baseT_Half;
348 	if (adv & ADVERTISE_1000XFULL)
349 		result |= ADVERTISED_1000baseT_Full;
350 	if (adv & ADVERTISE_1000XPAUSE)
351 		result |= ADVERTISED_Pause;
352 	if (adv & ADVERTISE_1000XPSE_ASYM)
353 		result |= ADVERTISED_Asym_Pause;
354 
355 	return result;
356 }
357 
358 /**
359  * mii_adv_mod_linkmode_adv_t
360  * @advertising:pointer to destination link mode.
361  * @adv: value of the MII_ADVERTISE register
362  *
363  * A small helper function that translates MII_ADVERTISE bits to
364  * linkmode advertisement settings. Leaves other bits unchanged.
365  */
mii_adv_mod_linkmode_adv_t(unsigned long * advertising,u32 adv)366 static inline void mii_adv_mod_linkmode_adv_t(unsigned long *advertising,
367 					      u32 adv)
368 {
369 	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
370 			 advertising, adv & ADVERTISE_10HALF);
371 
372 	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
373 			 advertising, adv & ADVERTISE_10FULL);
374 
375 	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
376 			 advertising, adv & ADVERTISE_100HALF);
377 
378 	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
379 			 advertising, adv & ADVERTISE_100FULL);
380 
381 	linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising,
382 			 adv & ADVERTISE_PAUSE_CAP);
383 
384 	linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
385 			 advertising, adv & ADVERTISE_PAUSE_ASYM);
386 }
387 
388 /**
389  * mii_adv_to_linkmode_adv_t
390  * @advertising:pointer to destination link mode.
391  * @adv: value of the MII_ADVERTISE register
392  *
393  * A small helper function that translates MII_ADVERTISE bits
394  * to linkmode advertisement settings. Clears the old value
395  * of advertising.
396  */
mii_adv_to_linkmode_adv_t(unsigned long * advertising,u32 adv)397 static inline void mii_adv_to_linkmode_adv_t(unsigned long *advertising,
398 					     u32 adv)
399 {
400 	linkmode_zero(advertising);
401 
402 	mii_adv_mod_linkmode_adv_t(advertising, adv);
403 }
404 
405 /**
406  * mii_lpa_to_linkmode_lpa_t
407  * @adv: value of the MII_LPA register
408  *
409  * A small helper function that translates MII_LPA bits, when in
410  * 1000Base-T mode, to linkmode LP advertisement settings. Clears the
411  * old value of advertising
412  */
mii_lpa_to_linkmode_lpa_t(unsigned long * lp_advertising,u32 lpa)413 static inline void mii_lpa_to_linkmode_lpa_t(unsigned long *lp_advertising,
414 					     u32 lpa)
415 {
416 	mii_adv_to_linkmode_adv_t(lp_advertising, lpa);
417 
418 	if (lpa & LPA_LPACK)
419 		linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
420 				 lp_advertising);
421 
422 }
423 
424 /**
425  * mii_lpa_mod_linkmode_lpa_t
426  * @adv: value of the MII_LPA register
427  *
428  * A small helper function that translates MII_LPA bits, when in
429  * 1000Base-T mode, to linkmode LP advertisement settings. Leaves
430  * other bits unchanged.
431  */
mii_lpa_mod_linkmode_lpa_t(unsigned long * lp_advertising,u32 lpa)432 static inline void mii_lpa_mod_linkmode_lpa_t(unsigned long *lp_advertising,
433 					      u32 lpa)
434 {
435 	mii_adv_mod_linkmode_adv_t(lp_advertising, lpa);
436 
437 	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
438 			 lp_advertising, lpa & LPA_LPACK);
439 }
440 
mii_ctrl1000_mod_linkmode_adv_t(unsigned long * advertising,u32 ctrl1000)441 static inline void mii_ctrl1000_mod_linkmode_adv_t(unsigned long *advertising,
442 						   u32 ctrl1000)
443 {
444 	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, advertising,
445 			 ctrl1000 & ADVERTISE_1000HALF);
446 	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertising,
447 			 ctrl1000 & ADVERTISE_1000FULL);
448 }
449 
450 /**
451  * linkmode_adv_to_lcl_adv_t
452  * @advertising:pointer to linkmode advertising
453  *
454  * A small helper function that translates linkmode advertising to LVL
455  * pause capabilities.
456  */
linkmode_adv_to_lcl_adv_t(const unsigned long * advertising)457 static inline u32 linkmode_adv_to_lcl_adv_t(const unsigned long *advertising)
458 {
459 	u32 lcl_adv = 0;
460 
461 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
462 			      advertising))
463 		lcl_adv |= ADVERTISE_PAUSE_CAP;
464 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
465 			      advertising))
466 		lcl_adv |= ADVERTISE_PAUSE_ASYM;
467 
468 	return lcl_adv;
469 }
470 
471 /**
472  * mii_lpa_mod_linkmode_x - decode the link partner's config_reg to linkmodes
473  * @linkmodes: link modes array
474  * @lpa: config_reg word from link partner
475  * @fd_bit: link mode for 1000XFULL bit
476  */
mii_lpa_mod_linkmode_x(unsigned long * linkmodes,u16 lpa,int fd_bit)477 static inline void mii_lpa_mod_linkmode_x(unsigned long *linkmodes, u16 lpa,
478 					 int fd_bit)
479 {
480 	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, linkmodes,
481 			 lpa & LPA_LPACK);
482 	linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes,
483 			 lpa & LPA_1000XPAUSE);
484 	linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes,
485 			 lpa & LPA_1000XPAUSE_ASYM);
486 	linkmode_mod_bit(fd_bit, linkmodes,
487 			 lpa & LPA_1000XFULL);
488 }
489 
490 /**
491  * linkmode_adv_to_mii_adv_x - encode a linkmode to config_reg
492  * @linkmodes: linkmodes
493  * @fd_bit: full duplex bit
494  */
linkmode_adv_to_mii_adv_x(const unsigned long * linkmodes,int fd_bit)495 static inline u16 linkmode_adv_to_mii_adv_x(const unsigned long *linkmodes,
496 					    int fd_bit)
497 {
498 	u16 adv = 0;
499 
500 	if (linkmode_test_bit(fd_bit, linkmodes))
501 		adv |= ADVERTISE_1000XFULL;
502 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes))
503 		adv |= ADVERTISE_1000XPAUSE;
504 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes))
505 		adv |= ADVERTISE_1000XPSE_ASYM;
506 
507 	return adv;
508 }
509 
510 /**
511  * mii_advertise_flowctrl - get flow control advertisement flags
512  * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
513  */
mii_advertise_flowctrl(int cap)514 static inline u16 mii_advertise_flowctrl(int cap)
515 {
516 	u16 adv = 0;
517 
518 	if (cap & FLOW_CTRL_RX)
519 		adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
520 	if (cap & FLOW_CTRL_TX)
521 		adv ^= ADVERTISE_PAUSE_ASYM;
522 
523 	return adv;
524 }
525 
526 /**
527  * mii_resolve_flowctrl_fdx
528  * @lcladv: value of MII ADVERTISE register
529  * @rmtadv: value of MII LPA register
530  *
531  * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3
532  */
mii_resolve_flowctrl_fdx(u16 lcladv,u16 rmtadv)533 static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
534 {
535 	u8 cap = 0;
536 
537 	if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
538 		cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
539 	} else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
540 		if (lcladv & ADVERTISE_PAUSE_CAP)
541 			cap = FLOW_CTRL_RX;
542 		else if (rmtadv & ADVERTISE_PAUSE_CAP)
543 			cap = FLOW_CTRL_TX;
544 	}
545 
546 	return cap;
547 }
548 
549 /**
550  * mii_bmcr_encode_fixed - encode fixed speed/duplex settings to a BMCR value
551  * @speed: a SPEED_* value
552  * @duplex: a DUPLEX_* value
553  *
554  * Encode the speed and duplex to a BMCR value. 2500, 1000, 100 and 10 Mbps are
555  * supported. 2500Mbps is encoded to 1000Mbps. Other speeds are encoded as 10
556  * Mbps. Unknown duplex values are encoded to half-duplex.
557  */
mii_bmcr_encode_fixed(int speed,int duplex)558 static inline u16 mii_bmcr_encode_fixed(int speed, int duplex)
559 {
560 	u16 bmcr;
561 
562 	switch (speed) {
563 	case SPEED_2500:
564 	case SPEED_1000:
565 		bmcr = BMCR_SPEED1000;
566 		break;
567 
568 	case SPEED_100:
569 		bmcr = BMCR_SPEED100;
570 		break;
571 
572 	case SPEED_10:
573 	default:
574 		bmcr = BMCR_SPEED10;
575 		break;
576 	}
577 
578 	if (duplex == DUPLEX_FULL)
579 		bmcr |= BMCR_FULLDPLX;
580 
581 	return bmcr;
582 }
583 
584 #endif /* __LINUX_MII_H__ */
585