1 /*
2 * Generic Loongson-3 Platform support
3 *
4 * Copyright (c) 2018-2020 Huacai Chen (chenhc@lemote.com)
5 * Copyright (c) 2018-2020 Jiaxun Yang <jiaxun.yang@flygoat.com>
6 *
7 * This program is free software: you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation, either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program. If not, see <https://www.gnu.org/licenses/>.
19 */
20
21 /*
22 * Generic virtualized PC Platform based on Loongson-3 CPU (MIPS64R2 with
23 * extensions, 800~2000MHz)
24 */
25
26 #include "qemu/osdep.h"
27 #include "qemu/units.h"
28 #include "qemu/cutils.h"
29 #include "qemu/datadir.h"
30 #include "qapi/error.h"
31 #include "elf.h"
32 #include "hw/char/serial-mm.h"
33 #include "hw/intc/loongson_liointc.h"
34 #include "hw/mips/mips.h"
35 #include "hw/mips/fw_cfg.h"
36 #include "hw/mips/loongson3_bootp.h"
37 #include "hw/misc/unimp.h"
38 #include "hw/intc/i8259.h"
39 #include "hw/intc/loongson_ipi.h"
40 #include "hw/loader.h"
41 #include "hw/isa/superio.h"
42 #include "hw/pci/msi.h"
43 #include "hw/pci/pci.h"
44 #include "hw/pci/pci_host.h"
45 #include "hw/pci-host/gpex.h"
46 #include "hw/usb.h"
47 #include "net/net.h"
48 #include "sysemu/kvm.h"
49 #include "sysemu/qtest.h"
50 #include "sysemu/reset.h"
51 #include "sysemu/runstate.h"
52 #include "qemu/error-report.h"
53
54 #define PM_CNTL_MODE 0x10
55
56 #define LOONGSON_MAX_VCPUS 16
57
58 /*
59 * Loongson-3's virtual machine BIOS can be obtained here:
60 * 1, https://github.com/loongson-community/firmware-nonfree
61 * 2, http://dev.lemote.com:8000/files/firmware/UEFI/KVM/bios_loongson3.bin
62 */
63 #define LOONGSON3_BIOSNAME "bios_loongson3.bin"
64
65 #define UART_IRQ 0
66 #define RTC_IRQ 1
67 #define PCIE_IRQ_BASE 2
68
69 const MemMapEntry virt_memmap[] = {
70 [VIRT_LOWMEM] = { 0x00000000, 0x10000000 },
71 [VIRT_PM] = { 0x10080000, 0x100 },
72 [VIRT_FW_CFG] = { 0x10080100, 0x100 },
73 [VIRT_RTC] = { 0x10081000, 0x1000 },
74 [VIRT_PCIE_PIO] = { 0x18000000, 0x80000 },
75 [VIRT_PCIE_ECAM] = { 0x1a000000, 0x2000000 },
76 [VIRT_BIOS_ROM] = { 0x1fc00000, 0x200000 },
77 [VIRT_UART] = { 0x1fe001e0, 0x8 },
78 [VIRT_IPI] = { 0x3ff01000, 0x400 },
79 [VIRT_LIOINTC] = { 0x3ff01400, 0x64 },
80 [VIRT_PCIE_MMIO] = { 0x40000000, 0x40000000 },
81 [VIRT_HIGHMEM] = { 0x80000000, 0x0 }, /* Variable */
82 };
83
84 static const MemMapEntry loader_memmap[] = {
85 [LOADER_KERNEL] = { 0x00000000, 0x4000000 },
86 [LOADER_INITRD] = { 0x04000000, 0x0 }, /* Variable */
87 [LOADER_CMDLINE] = { 0x0ff00000, 0x100000 },
88 };
89
90 static const MemMapEntry loader_rommap[] = {
91 [LOADER_BOOTROM] = { 0x1fc00000, 0x1000 },
92 [LOADER_PARAM] = { 0x1fc01000, 0x10000 },
93 };
94
95 struct LoongsonMachineState {
96 MachineState parent_obj;
97 MemoryRegion *pio_alias;
98 MemoryRegion *mmio_alias;
99 MemoryRegion *ecam_alias;
100 MemoryRegion *core_iocsr[LOONGSON_MAX_VCPUS];
101 };
102 typedef struct LoongsonMachineState LoongsonMachineState;
103
104 #define TYPE_LOONGSON_MACHINE MACHINE_TYPE_NAME("loongson3-virt")
105 DECLARE_INSTANCE_CHECKER(LoongsonMachineState, LOONGSON_MACHINE, TYPE_LOONGSON_MACHINE)
106
107 static struct _loaderparams {
108 uint64_t cpu_freq;
109 uint64_t ram_size;
110 const char *kernel_cmdline;
111 const char *kernel_filename;
112 const char *initrd_filename;
113 uint64_t kernel_entry;
114 uint64_t a0, a1, a2;
115 } loaderparams;
116
loongson3_pm_read(void * opaque,hwaddr addr,unsigned size)117 static uint64_t loongson3_pm_read(void *opaque, hwaddr addr, unsigned size)
118 {
119 return 0;
120 }
121
loongson3_pm_write(void * opaque,hwaddr addr,uint64_t val,unsigned size)122 static void loongson3_pm_write(void *opaque, hwaddr addr,
123 uint64_t val, unsigned size)
124 {
125 if (addr != PM_CNTL_MODE) {
126 return;
127 }
128
129 switch (val) {
130 case 0x00:
131 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
132 return;
133 case 0x01:
134 qemu_system_suspend_request();
135 return;
136 case 0xff:
137 qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
138 return;
139 default:
140 return;
141 }
142 }
143
144 static const MemoryRegionOps loongson3_pm_ops = {
145 .read = loongson3_pm_read,
146 .write = loongson3_pm_write,
147 .endianness = DEVICE_NATIVE_ENDIAN,
148 .valid = {
149 .min_access_size = 1,
150 .max_access_size = 1
151 }
152 };
153
154 #define DEF_LOONGSON3_FREQ (800 * 1000 * 1000)
155
get_cpu_freq_hz(void)156 static uint64_t get_cpu_freq_hz(void)
157 {
158 #ifdef CONFIG_KVM
159 int ret;
160 uint64_t freq;
161 struct kvm_one_reg freq_reg = {
162 .id = KVM_REG_MIPS_COUNT_HZ,
163 .addr = (uintptr_t)(&freq)
164 };
165
166 if (kvm_enabled()) {
167 ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);
168 if (ret >= 0) {
169 return freq * 2;
170 }
171 }
172 #endif
173 return DEF_LOONGSON3_FREQ;
174 }
175
init_boot_param(void)176 static void init_boot_param(void)
177 {
178 static void *p;
179 struct boot_params *bp;
180
181 p = g_malloc0(loader_rommap[LOADER_PARAM].size);
182 bp = p;
183
184 bp->efi.smbios.vers = cpu_to_le16(1);
185 init_reset_system(&(bp->reset_system));
186 p += ROUND_UP(sizeof(struct boot_params), 64);
187 init_loongson_params(&(bp->efi.smbios.lp), p,
188 loaderparams.cpu_freq, loaderparams.ram_size);
189
190 rom_add_blob_fixed("params_rom", bp,
191 loader_rommap[LOADER_PARAM].size,
192 loader_rommap[LOADER_PARAM].base);
193
194 g_free(bp);
195
196 loaderparams.a2 = cpu_mips_phys_to_kseg0(NULL,
197 loader_rommap[LOADER_PARAM].base);
198 }
199
init_boot_rom(void)200 static void init_boot_rom(void)
201 {
202 const unsigned int boot_code[] = {
203 0x40086000, /* mfc0 t0, CP0_STATUS */
204 0x240900E4, /* li t1, 0xe4 #set kx, sx, ux, erl */
205 0x01094025, /* or t0, t0, t1 */
206 0x3C090040, /* lui t1, 0x40 #set bev */
207 0x01094025, /* or t0, t0, t1 */
208 0x40886000, /* mtc0 t0, CP0_STATUS */
209 0x00000000,
210 0x40806800, /* mtc0 zero, CP0_CAUSE */
211 0x00000000,
212 0x400A7801, /* mfc0 t2, $15, 1 */
213 0x314A00FF, /* andi t2, 0x0ff */
214 0x3C089000, /* dli t0, 0x900000003ff01000 */
215 0x00084438,
216 0x35083FF0,
217 0x00084438,
218 0x35081000,
219 0x314B0003, /* andi t3, t2, 0x3 #local cpuid */
220 0x000B5A00, /* sll t3, 8 */
221 0x010B4025, /* or t0, t0, t3 */
222 0x314C000C, /* andi t4, t2, 0xc #node id */
223 0x000C62BC, /* dsll t4, 42 */
224 0x010C4025, /* or t0, t0, t4 */
225 /* WaitForInit: */
226 0xDD020020, /* ld v0, FN_OFF(t0) #FN_OFF 0x020 */
227 0x1040FFFE, /* beqz v0, WaitForInit */
228 0x00000000, /* nop */
229 0xDD1D0028, /* ld sp, SP_OFF(t0) #FN_OFF 0x028 */
230 0xDD1C0030, /* ld gp, GP_OFF(t0) #FN_OFF 0x030 */
231 0xDD050038, /* ld a1, A1_OFF(t0) #FN_OFF 0x038 */
232 0x00400008, /* jr v0 #byebye */
233 0x00000000, /* nop */
234 0x1000FFFF, /* 1: b 1b */
235 0x00000000, /* nop */
236
237 /* Reset */
238 0x3C0C9000, /* dli t0, 0x9000000010080010 */
239 0x358C0000,
240 0x000C6438,
241 0x358C1008,
242 0x000C6438,
243 0x358C0010,
244 0x240D0000, /* li t1, 0x00 */
245 0xA18D0000, /* sb t1, (t0) */
246 0x1000FFFF, /* 1: b 1b */
247 0x00000000, /* nop */
248
249 /* Shutdown */
250 0x3C0C9000, /* dli t0, 0x9000000010080010 */
251 0x358C0000,
252 0x000C6438,
253 0x358C1008,
254 0x000C6438,
255 0x358C0010,
256 0x240D00FF, /* li t1, 0xff */
257 0xA18D0000, /* sb t1, (t0) */
258 0x1000FFFF, /* 1: b 1b */
259 0x00000000, /* nop */
260 /* Suspend */
261 0x3C0C9000, /* dli t0, 0x9000000010080010 */
262 0x358C0000,
263 0x000C6438,
264 0x358C1008,
265 0x000C6438,
266 0x358C0010,
267 0x240D0001, /* li t1, 0x01 */
268 0xA18D0000, /* sb t1, (t0) */
269 0x03e00008, /* jr ra */
270 0x00000000 /* nop */
271 };
272
273 rom_add_blob_fixed("boot_rom", boot_code, sizeof(boot_code),
274 loader_rommap[LOADER_BOOTROM].base);
275 }
276
fw_cfg_boot_set(void * opaque,const char * boot_device,Error ** errp)277 static void fw_cfg_boot_set(void *opaque, const char *boot_device,
278 Error **errp)
279 {
280 fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
281 }
282
fw_conf_init(unsigned long ram_size)283 static void fw_conf_init(unsigned long ram_size)
284 {
285 static const uint8_t suspend[6] = {128, 0, 0, 129, 128, 128};
286 FWCfgState *fw_cfg;
287 hwaddr cfg_addr = virt_memmap[VIRT_FW_CFG].base;
288
289 fw_cfg = fw_cfg_init_mem_wide(cfg_addr, cfg_addr + 8, 8, 0, NULL);
290 fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)current_machine->smp.cpus);
291 fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)current_machine->smp.max_cpus);
292 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
293 fw_cfg_add_i32(fw_cfg, FW_CFG_MACHINE_VERSION, 1);
294 fw_cfg_add_i64(fw_cfg, FW_CFG_CPU_FREQ, get_cpu_freq_hz());
295
296 fw_cfg_add_file(fw_cfg, "etc/system-states",
297 g_memdup2(suspend, sizeof(suspend)), sizeof(suspend));
298
299 qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
300 }
301
set_prom_cmdline(ram_addr_t initrd_offset,long initrd_size)302 static int set_prom_cmdline(ram_addr_t initrd_offset, long initrd_size)
303 {
304 int ret = 0;
305 void *cmdline_buf;
306 hwaddr cmdline_vaddr;
307 unsigned int *parg_env;
308
309 /* Allocate cmdline_buf for command line. */
310 cmdline_buf = g_malloc0(loader_memmap[LOADER_CMDLINE].size);
311 cmdline_vaddr = cpu_mips_phys_to_kseg0(NULL,
312 loader_memmap[LOADER_CMDLINE].base);
313
314 /*
315 * Layout of cmdline_buf looks like this:
316 * argv[0], argv[1], 0, env[0], env[1], ... env[i], 0,
317 * argv[0]'s data, argv[1]'s data, env[0]'data, ..., env[i]'s data, 0
318 */
319 parg_env = (void *)cmdline_buf;
320
321 ret = (3 + 1) * 4;
322 *parg_env++ = cmdline_vaddr + ret;
323 ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "g"));
324
325 /* argv1 */
326 *parg_env++ = cmdline_vaddr + ret;
327 if (initrd_size > 0)
328 ret += (1 + snprintf(cmdline_buf + ret, 256 - ret,
329 "rd_start=0x" TARGET_FMT_lx " rd_size=%li %s",
330 cpu_mips_phys_to_kseg0(NULL, initrd_offset),
331 initrd_size, loaderparams.kernel_cmdline));
332 else
333 ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "%s",
334 loaderparams.kernel_cmdline));
335
336 /* argv2 */
337 *parg_env++ = cmdline_vaddr + 4 * ret;
338
339 rom_add_blob_fixed("cmdline", cmdline_buf,
340 loader_memmap[LOADER_CMDLINE].size,
341 loader_memmap[LOADER_CMDLINE].base);
342
343 g_free(cmdline_buf);
344
345 loaderparams.a0 = 2;
346 loaderparams.a1 = cmdline_vaddr;
347
348 return 0;
349 }
350
load_kernel(CPUMIPSState * env)351 static uint64_t load_kernel(CPUMIPSState *env)
352 {
353 long kernel_size;
354 ram_addr_t initrd_offset;
355 uint64_t kernel_entry, kernel_low, kernel_high, initrd_size;
356
357 kernel_size = load_elf(loaderparams.kernel_filename, NULL,
358 cpu_mips_kseg0_to_phys, NULL,
359 &kernel_entry,
360 &kernel_low, &kernel_high,
361 NULL, 0, EM_MIPS, 1, 0);
362 if (kernel_size < 0) {
363 error_report("could not load kernel '%s': %s",
364 loaderparams.kernel_filename,
365 load_elf_strerror(kernel_size));
366 exit(1);
367 }
368
369 /* load initrd */
370 initrd_size = 0;
371 initrd_offset = 0;
372 if (loaderparams.initrd_filename) {
373 initrd_size = get_image_size(loaderparams.initrd_filename);
374 if (initrd_size > 0) {
375 initrd_offset = MAX(loader_memmap[LOADER_INITRD].base,
376 ROUND_UP(kernel_high, INITRD_PAGE_SIZE));
377
378 if (initrd_offset + initrd_size > loaderparams.ram_size) {
379 error_report("memory too small for initial ram disk '%s'",
380 loaderparams.initrd_filename);
381 exit(1);
382 }
383
384 initrd_size = load_image_targphys(loaderparams.initrd_filename,
385 initrd_offset,
386 loaderparams.ram_size - initrd_offset);
387 }
388
389 if (initrd_size == (target_ulong) -1) {
390 error_report("could not load initial ram disk '%s'",
391 loaderparams.initrd_filename);
392 exit(1);
393 }
394 }
395
396 /* Setup prom cmdline. */
397 set_prom_cmdline(initrd_offset, initrd_size);
398
399 return kernel_entry;
400 }
401
main_cpu_reset(void * opaque)402 static void main_cpu_reset(void *opaque)
403 {
404 MIPSCPU *cpu = opaque;
405 CPUMIPSState *env = &cpu->env;
406
407 cpu_reset(CPU(cpu));
408
409 /* Loongson-3 reset stuff */
410 if (loaderparams.kernel_filename) {
411 if (cpu == MIPS_CPU(first_cpu)) {
412 env->active_tc.gpr[4] = loaderparams.a0;
413 env->active_tc.gpr[5] = loaderparams.a1;
414 env->active_tc.gpr[6] = loaderparams.a2;
415 env->active_tc.PC = loaderparams.kernel_entry;
416 }
417 env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
418 }
419 }
420
loongson3_virt_devices_init(MachineState * machine,DeviceState * pic)421 static inline void loongson3_virt_devices_init(MachineState *machine,
422 DeviceState *pic)
423 {
424 int i;
425 qemu_irq irq;
426 PCIBus *pci_bus;
427 DeviceState *dev;
428 MemoryRegion *mmio_reg, *ecam_reg;
429 MachineClass *mc = MACHINE_GET_CLASS(machine);
430 LoongsonMachineState *s = LOONGSON_MACHINE(machine);
431
432 dev = qdev_new(TYPE_GPEX_HOST);
433 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
434 pci_bus = PCI_HOST_BRIDGE(dev)->bus;
435
436 s->ecam_alias = g_new0(MemoryRegion, 1);
437 ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
438 memory_region_init_alias(s->ecam_alias, OBJECT(dev), "pcie-ecam",
439 ecam_reg, 0, virt_memmap[VIRT_PCIE_ECAM].size);
440 memory_region_add_subregion(get_system_memory(),
441 virt_memmap[VIRT_PCIE_ECAM].base,
442 s->ecam_alias);
443
444 s->mmio_alias = g_new0(MemoryRegion, 1);
445 mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
446 memory_region_init_alias(s->mmio_alias, OBJECT(dev), "pcie-mmio",
447 mmio_reg, virt_memmap[VIRT_PCIE_MMIO].base,
448 virt_memmap[VIRT_PCIE_MMIO].size);
449 memory_region_add_subregion(get_system_memory(),
450 virt_memmap[VIRT_PCIE_MMIO].base,
451 s->mmio_alias);
452
453 s->pio_alias = g_new0(MemoryRegion, 1);
454 memory_region_init_alias(s->pio_alias, OBJECT(dev), "pcie-pio",
455 get_system_io(), 0,
456 virt_memmap[VIRT_PCIE_PIO].size);
457 memory_region_add_subregion(get_system_memory(),
458 virt_memmap[VIRT_PCIE_PIO].base, s->pio_alias);
459 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, virt_memmap[VIRT_PCIE_PIO].base);
460
461 for (i = 0; i < GPEX_NUM_IRQS; i++) {
462 irq = qdev_get_gpio_in(pic, PCIE_IRQ_BASE + i);
463 sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
464 gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ_BASE + i);
465 }
466 msi_nonbroken = true;
467
468 pci_vga_init(pci_bus);
469
470 if (defaults_enabled() && object_class_by_name("pci-ohci")) {
471 USBBus *usb_bus;
472
473 pci_create_simple(pci_bus, -1, "pci-ohci");
474 usb_bus = USB_BUS(object_resolve_type_unambiguous(TYPE_USB_BUS,
475 &error_abort));
476 usb_create_simple(usb_bus, "usb-kbd");
477 usb_create_simple(usb_bus, "usb-tablet");
478 }
479
480 pci_init_nic_devices(pci_bus, mc->default_nic);
481 }
482
mips_loongson3_virt_init(MachineState * machine)483 static void mips_loongson3_virt_init(MachineState *machine)
484 {
485 int i;
486 long bios_size;
487 MIPSCPU *cpu;
488 Clock *cpuclk;
489 CPUMIPSState *env;
490 DeviceState *liointc;
491 DeviceState *ipi = NULL;
492 char *filename;
493 const char *kernel_cmdline = machine->kernel_cmdline;
494 const char *kernel_filename = machine->kernel_filename;
495 const char *initrd_filename = machine->initrd_filename;
496 ram_addr_t ram_size = machine->ram_size;
497 LoongsonMachineState *s = LOONGSON_MACHINE(machine);
498 MemoryRegion *address_space_mem = get_system_memory();
499 MemoryRegion *ram = g_new(MemoryRegion, 1);
500 MemoryRegion *bios = g_new(MemoryRegion, 1);
501 MemoryRegion *iomem = g_new(MemoryRegion, 1);
502 MemoryRegion *iocsr = g_new(MemoryRegion, 1);
503
504 /* TODO: TCG will support all CPU types */
505 if (!kvm_enabled()) {
506 if (!machine->cpu_type) {
507 machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");
508 }
509 if (!cpu_type_supports_isa(machine->cpu_type, INSN_LOONGSON3A)) {
510 error_report("Loongson-3/TCG needs a Loongson-3 series cpu");
511 exit(1);
512 }
513 } else {
514 if (!machine->cpu_type) {
515 machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");
516 }
517 if (!strstr(machine->cpu_type, "Loongson-3A4000")) {
518 error_report("Loongson-3/KVM needs cpu type Loongson-3A4000");
519 exit(1);
520 }
521 }
522
523 if (ram_size < 512 * MiB) {
524 error_report("Loongson-3 machine needs at least 512MB memory");
525 exit(1);
526 }
527
528 /*
529 * The whole MMIO range among configure registers doesn't generate
530 * exception when accessing invalid memory. Create some unimplememted
531 * devices to emulate this feature.
532 */
533 create_unimplemented_device("mmio fallback 0", 0x10000000, 256 * MiB);
534 create_unimplemented_device("mmio fallback 1", 0x30000000, 256 * MiB);
535
536 memory_region_init(iocsr, OBJECT(machine), "loongson3.iocsr", UINT32_MAX);
537
538 /* IPI controller is in kernel for KVM */
539 if (!kvm_enabled()) {
540 ipi = qdev_new(TYPE_LOONGSON_IPI);
541 qdev_prop_set_uint32(ipi, "num-cpu", machine->smp.cpus);
542 sysbus_realize_and_unref(SYS_BUS_DEVICE(ipi), &error_fatal);
543 memory_region_add_subregion(iocsr, SMP_IPI_MAILBOX,
544 sysbus_mmio_get_region(SYS_BUS_DEVICE(ipi), 0));
545 memory_region_add_subregion(iocsr, MAIL_SEND_ADDR,
546 sysbus_mmio_get_region(SYS_BUS_DEVICE(ipi), 1));
547 }
548
549 liointc = qdev_new("loongson.liointc");
550 sysbus_realize_and_unref(SYS_BUS_DEVICE(liointc), &error_fatal);
551
552 sysbus_mmio_map(SYS_BUS_DEVICE(liointc), 0, virt_memmap[VIRT_LIOINTC].base);
553
554 serial_mm_init(address_space_mem, virt_memmap[VIRT_UART].base, 0,
555 qdev_get_gpio_in(liointc, UART_IRQ), 115200, serial_hd(0),
556 DEVICE_NATIVE_ENDIAN);
557
558 sysbus_create_simple("goldfish_rtc", virt_memmap[VIRT_RTC].base,
559 qdev_get_gpio_in(liointc, RTC_IRQ));
560
561 cpuclk = clock_new(OBJECT(machine), "cpu-refclk");
562 clock_set_hz(cpuclk, DEF_LOONGSON3_FREQ);
563
564 for (i = 0; i < machine->smp.cpus; i++) {
565 int node = i / LOONGSON3_CORE_PER_NODE;
566 int core = i % LOONGSON3_CORE_PER_NODE;
567 int ip;
568
569 /* init CPUs */
570 cpu = mips_cpu_create_with_clock(machine->cpu_type, cpuclk, false);
571
572 /* Init internal devices */
573 cpu_mips_irq_init_cpu(cpu);
574 cpu_mips_clock_init(cpu);
575 qemu_register_reset(main_cpu_reset, cpu);
576
577 if (!kvm_enabled()) {
578 hwaddr base = ((hwaddr)node << 44) + virt_memmap[VIRT_IPI].base;
579 base += core * 0x100;
580 qdev_connect_gpio_out(ipi, i, cpu->env.irq[6]);
581 sysbus_mmio_map(SYS_BUS_DEVICE(ipi), i + 2, base);
582 }
583
584 if (ase_lcsr_available(&MIPS_CPU(cpu)->env)) {
585 MemoryRegion *core_iocsr = g_new(MemoryRegion, 1);
586 g_autofree char *name = g_strdup_printf("core%d_iocsr", i);
587 memory_region_init_alias(core_iocsr, OBJECT(cpu), name,
588 iocsr, 0, UINT32_MAX);
589 memory_region_add_subregion(&MIPS_CPU(cpu)->env.iocsr.mr,
590 0, core_iocsr);
591 s->core_iocsr[i] = core_iocsr;
592 }
593
594 if (node > 0) {
595 continue; /* Only node-0 can be connected to LIOINTC */
596 }
597
598 for (ip = 0; ip < 4 ; ip++) {
599 int pin = core * LOONGSON3_CORE_PER_NODE + ip;
600 sysbus_connect_irq(SYS_BUS_DEVICE(liointc),
601 pin, cpu->env.irq[ip + 2]);
602 }
603 }
604 env = &MIPS_CPU(first_cpu)->env;
605
606 /* Allocate RAM/BIOS, 0x00000000~0x10000000 is alias of 0x80000000~0x90000000 */
607 memory_region_init_rom(bios, NULL, "loongson3.bios",
608 virt_memmap[VIRT_BIOS_ROM].size, &error_fatal);
609 memory_region_init_alias(ram, NULL, "loongson3.lowmem",
610 machine->ram, 0, virt_memmap[VIRT_LOWMEM].size);
611 memory_region_init_io(iomem, NULL, &loongson3_pm_ops,
612 NULL, "loongson3_pm", virt_memmap[VIRT_PM].size);
613 qemu_register_wakeup_support();
614
615 memory_region_add_subregion(address_space_mem,
616 virt_memmap[VIRT_LOWMEM].base, ram);
617 memory_region_add_subregion(address_space_mem,
618 virt_memmap[VIRT_BIOS_ROM].base, bios);
619 memory_region_add_subregion(address_space_mem,
620 virt_memmap[VIRT_HIGHMEM].base, machine->ram);
621 memory_region_add_subregion(address_space_mem,
622 virt_memmap[VIRT_PM].base, iomem);
623
624 /*
625 * We do not support flash operation, just loading bios.bin as raw BIOS.
626 * Please use -L to set the BIOS path and -bios to set bios name.
627 */
628
629 if (kernel_filename) {
630 loaderparams.cpu_freq = get_cpu_freq_hz();
631 loaderparams.ram_size = ram_size;
632 loaderparams.kernel_filename = kernel_filename;
633 loaderparams.kernel_cmdline = kernel_cmdline;
634 loaderparams.initrd_filename = initrd_filename;
635 loaderparams.kernel_entry = load_kernel(env);
636
637 init_boot_rom();
638 init_boot_param();
639 } else {
640 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS,
641 machine->firmware ?: LOONGSON3_BIOSNAME);
642 if (filename) {
643 bios_size = load_image_targphys(filename,
644 virt_memmap[VIRT_BIOS_ROM].base,
645 virt_memmap[VIRT_BIOS_ROM].size);
646 g_free(filename);
647 } else {
648 bios_size = -1;
649 }
650
651 if ((bios_size < 0 || bios_size > virt_memmap[VIRT_BIOS_ROM].size) &&
652 !kernel_filename && !qtest_enabled()) {
653 error_report("Could not load MIPS bios '%s'", machine->firmware);
654 exit(1);
655 }
656
657 fw_conf_init(ram_size);
658 }
659
660 loongson3_virt_devices_init(machine, liointc);
661 }
662
loongson3v_machine_class_init(ObjectClass * oc,void * data)663 static void loongson3v_machine_class_init(ObjectClass *oc, void *data)
664 {
665 MachineClass *mc = MACHINE_CLASS(oc);
666
667 mc->desc = "Loongson-3 Virtualization Platform";
668 mc->init = mips_loongson3_virt_init;
669 mc->block_default_type = IF_IDE;
670 mc->max_cpus = LOONGSON_MAX_VCPUS;
671 mc->default_ram_id = "loongson3.highram";
672 mc->default_ram_size = 1600 * MiB;
673 mc->minimum_page_bits = 14;
674 mc->default_nic = "virtio-net-pci";
675 }
676
677 static const TypeInfo loongson3_machine_types[] = {
678 {
679 .name = TYPE_LOONGSON_MACHINE,
680 .parent = TYPE_MACHINE,
681 .instance_size = sizeof(LoongsonMachineState),
682 .class_init = loongson3v_machine_class_init,
683 }
684 };
685
686 DEFINE_TYPES(loongson3_machine_types)
687