1 /*
2 * Implementation of Utility functions for all SCSI device types.
3 *
4 * Copyright (c) 1997, 1998 Justin T. Gibbs.
5 * Copyright (c) 1997, 1998, 2003 Kenneth D. Merry.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification, immediately at the beginning of the file.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
29 * $FreeBSD: src/sys/cam/scsi/scsi_all.c,v 1.54 2009/01/14 21:25:17 trasz Exp $
30 */
31
32 #include <sys/param.h>
33
34 #ifdef _KERNEL
35
36 #include <opt_scsi.h>
37 #include <sys/systm.h>
38 #include <sys/libkern.h>
39 #include <sys/kernel.h>
40 #include <sys/sysctl.h>
41
42 #else
43
44 #include <errno.h>
45 #include <stdio.h>
46 #include <stdlib.h>
47 #include <string.h>
48
49 #define ksnprintf snprintf /* ick, userland uses us too */
50 #define kprintf printf
51 #define kbsearch bsearch
52
53 #endif
54
55 #include "../cam.h"
56 #include "../cam_ccb.h"
57 #include "../cam_xpt.h"
58 #include "../cam_xpt_periph.h"
59 #include "scsi_all.h"
60 #include <sys/sbuf.h>
61 #ifndef _KERNEL
62 #include <sys/camlib.h>
63
64 #ifndef FALSE
65 #define FALSE 0
66 #endif /* FALSE */
67 #ifndef TRUE
68 #define TRUE 1
69 #endif /* TRUE */
70 #define ERESTART -1 /* restart syscall */
71 #define EJUSTRETURN -2 /* don't modify regs, just return */
72 #endif /* !_KERNEL */
73
74 /*
75 * This is the default number of milliseconds we wait for devices to settle
76 * after a SCSI bus reset.
77 */
78 #ifndef SCSI_DELAY
79 #define SCSI_DELAY 2000
80 #endif
81 /*
82 * All devices need _some_ sort of bus settle delay, so we'll set it to
83 * a minimum value of 100ms. Note that this is pertinent only for SPI-
84 * not transport like Fibre Channel or iSCSI where 'delay' is completely
85 * meaningless.
86 */
87 #ifndef SCSI_MIN_DELAY
88 #define SCSI_MIN_DELAY 100
89 #endif
90 /*
91 * Make sure the user isn't using seconds instead of milliseconds.
92 */
93 #if (SCSI_DELAY < SCSI_MIN_DELAY && SCSI_DELAY != 0)
94 #error "SCSI_DELAY is in milliseconds, not seconds! Please use a larger value"
95 #endif
96
97 int scsi_delay;
98
99 static int ascentrycomp(const void *key, const void *member);
100 static int senseentrycomp(const void *key, const void *member);
101 static void fetchtableentries(int sense_key, int asc, int ascq,
102 struct scsi_inquiry_data *,
103 const struct sense_key_table_entry **,
104 const struct asc_table_entry **);
105 #ifdef _KERNEL
106 static void init_scsi_delay(void);
107 static int sysctl_scsi_delay(SYSCTL_HANDLER_ARGS);
108 static int set_scsi_delay(int delay);
109 #endif
110
111 #if !defined(SCSI_NO_OP_STRINGS)
112
113 #define D (1 << T_DIRECT)
114 #define T (1 << T_SEQUENTIAL)
115 #define L (1 << T_PRINTER)
116 #define P (1 << T_PROCESSOR)
117 #define W (1 << T_WORM)
118 #define R (1 << T_CDROM)
119 #define O (1 << T_OPTICAL)
120 #define M (1 << T_CHANGER)
121 #define A (1 << T_STORARRAY)
122 #define E (1 << T_ENCLOSURE)
123 #define B (1 << T_RBC)
124 #define K (1 << T_OCRW)
125 #define V (1 << T_ADC)
126 #define F (1 << T_OSD)
127 #define S (1 << T_SCANNER)
128 #define C (1 << T_COMM)
129
130 #define ALL (D | T | L | P | W | R | O | M | A | E | B | K | V | F | S | C)
131
132 static struct op_table_entry plextor_cd_ops[] = {
133 { 0xD8, R, "CD-DA READ" }
134 };
135
136 static struct scsi_op_quirk_entry scsi_op_quirk_table[] = {
137 {
138 /*
139 * I believe that 0xD8 is the Plextor proprietary command
140 * to read CD-DA data. I'm not sure which Plextor CDROM
141 * models support the command, though. I know for sure
142 * that the 4X, 8X, and 12X models do, and presumably the
143 * 12-20X does. I don't know about any earlier models,
144 * though. If anyone has any more complete information,
145 * feel free to change this quirk entry.
146 */
147 {T_CDROM, SIP_MEDIA_REMOVABLE, "PLEXTOR", "CD-ROM PX*", "*"},
148 NELEM(plextor_cd_ops),
149 plextor_cd_ops
150 }
151 };
152
153 static struct op_table_entry scsi_op_codes[] = {
154 /*
155 * From: http://www.t10.org/lists/op-num.txt
156 * Modifications by Kenneth Merry (ken@FreeBSD.ORG)
157 * and Jung-uk Kim (jkim@FreeBSD.org)
158 *
159 * Note: order is important in this table, scsi_op_desc() currently
160 * depends on the opcodes in the table being in order to save
161 * search time.
162 * Note: scanner and comm. devices are carried over from the previous
163 * version because they were removed in the latest spec.
164 */
165 /* File: OP-NUM.TXT
166 *
167 * SCSI Operation Codes
168 * Numeric Sorted Listing
169 * as of 3/11/08
170 *
171 * D - DIRECT ACCESS DEVICE (SBC-2) device column key
172 * .T - SEQUENTIAL ACCESS DEVICE (SSC-2) -----------------
173 * . L - PRINTER DEVICE (SSC) M = Mandatory
174 * . P - PROCESSOR DEVICE (SPC) O = Optional
175 * . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC-2) V = Vendor spec.
176 * . . R - CD/DVE DEVICE (MMC-3) Z = Obsolete
177 * . . O - OPTICAL MEMORY DEVICE (SBC-2)
178 * . . .M - MEDIA CHANGER DEVICE (SMC-2)
179 * . . . A - STORAGE ARRAY DEVICE (SCC-2)
180 * . . . .E - ENCLOSURE SERVICES DEVICE (SES)
181 * . . . .B - SIMPLIFIED DIRECT-ACCESS DEVICE (RBC)
182 * . . . . K - OPTICAL CARD READER/WRITER DEVICE (OCRW)
183 * . . . . V - AUTOMATION/DRIVE INTERFACE (ADC)
184 * . . . . .F - OBJECT-BASED STORAGE (OSD)
185 * OP DTLPWROMAEBKVF Description
186 * -- -------------- ---------------------------------------------- */
187 /* 00 MMMMMMMMMMMMMM TEST UNIT READY */
188 { 0x00, ALL, "TEST UNIT READY" },
189 /* 01 M REWIND */
190 { 0x01, T, "REWIND" },
191 /* 01 Z V ZZZZ REZERO UNIT */
192 { 0x01, D | W | R | O | M, "REZERO UNIT" },
193 /* 02 VVVVVV V */
194 /* 03 MMMMMMMMMMOMMM REQUEST SENSE */
195 { 0x03, ALL, "REQUEST SENSE" },
196 /* 04 M OO FORMAT UNIT */
197 { 0x04, D | R | O, "FORMAT UNIT" },
198 /* 04 O FORMAT MEDIUM */
199 { 0x04, T, "FORMAT MEDIUM" },
200 /* 04 O FORMAT */
201 { 0x04, L, "FORMAT" },
202 /* 05 VMVVVV V READ BLOCK LIMITS */
203 { 0x05, T, "READ BLOCK LIMITS" },
204 /* 06 VVVVVV V */
205 /* 07 OVV O OV REASSIGN BLOCKS */
206 { 0x07, D | W | O, "REASSIGN BLOCKS" },
207 /* 07 O INITIALIZE ELEMENT STATUS */
208 { 0x07, M, "INITIALIZE ELEMENT STATUS" },
209 /* 08 MOV O OV READ(6) */
210 { 0x08, D | T | W | O, "READ(6)" },
211 /* 08 O RECEIVE */
212 { 0x08, P, "RECEIVE" },
213 /* 08 GET MESSAGE(6) */
214 { 0x08, C, "GET MESSAGE(6)" },
215 /* 09 VVVVVV V */
216 /* 0A OO O OV WRITE(6) */
217 { 0x0A, D | T | W | O, "WRITE(6)" },
218 /* 0A M SEND(6) */
219 { 0x0A, P, "SEND(6)" },
220 /* 0A SEND MESSAGE(6) */
221 { 0x0A, C, "SEND MESSAGE(6)" },
222 /* 0A M PRINT */
223 { 0x0A, L, "PRINT" },
224 /* 0B Z ZOZV SEEK(6) */
225 { 0x0B, D | W | R | O, "SEEK(6)" },
226 /* 0B O SET CAPACITY */
227 { 0x0B, T, "SET CAPACITY" },
228 /* 0B O SLEW AND PRINT */
229 { 0x0B, L, "SLEW AND PRINT" },
230 /* 0C VVVVVV V */
231 /* 0D VVVVVV V */
232 /* 0E VVVVVV V */
233 /* 0F VOVVVV V READ REVERSE(6) */
234 { 0x0F, T, "READ REVERSE(6)" },
235 /* 10 VM VVV WRITE FILEMARKS(6) */
236 { 0x10, T, "WRITE FILEMARKS(6)" },
237 /* 10 O SYNCHRONIZE BUFFER */
238 { 0x10, L, "SYNCHRONIZE BUFFER" },
239 /* 11 VMVVVV SPACE(6) */
240 { 0x11, T, "SPACE(6)" },
241 /* 12 MMMMMMMMMMMMMM INQUIRY */
242 { 0x12, ALL, "INQUIRY" },
243 /* 13 V VVVV */
244 /* 13 O VERIFY(6) */
245 { 0x13, T, "VERIFY(6)" },
246 /* 14 VOOVVV RECOVER BUFFERED DATA */
247 { 0x14, T | L, "RECOVER BUFFERED DATA" },
248 /* 15 OMO O OOOO OO MODE SELECT(6) */
249 { 0x15, ALL & ~(P | R | B | F), "MODE SELECT(6)" },
250 /* 16 ZZMZO OOOZ O RESERVE(6) */
251 { 0x16, ALL & ~(R | B | V | F | C), "RESERVE(6)" },
252 /* 16 Z RESERVE ELEMENT(6) */
253 { 0x16, M, "RESERVE ELEMENT(6)" },
254 /* 17 ZZMZO OOOZ O RELEASE(6) */
255 { 0x17, ALL & ~(R | B | V | F | C), "RELEASE(6)" },
256 /* 17 Z RELEASE ELEMENT(6) */
257 { 0x17, M, "RELEASE ELEMENT(6)" },
258 /* 18 ZZZZOZO Z COPY */
259 { 0x18, D | T | L | P | W | R | O | K | S, "COPY" },
260 /* 19 VMVVVV ERASE(6) */
261 { 0x19, T, "ERASE(6)" },
262 /* 1A OMO O OOOO OO MODE SENSE(6) */
263 { 0x1A, ALL & ~(P | R | B | F), "MODE SENSE(6)" },
264 /* 1B O OOO O MO O START STOP UNIT */
265 { 0x1B, D | W | R | O | A | B | K | F, "START STOP UNIT" },
266 /* 1B O M LOAD UNLOAD */
267 { 0x1B, T | V, "LOAD UNLOAD" },
268 /* 1B SCAN */
269 { 0x1B, S, "SCAN" },
270 /* 1B O STOP PRINT */
271 { 0x1B, L, "STOP PRINT" },
272 /* 1B O OPEN/CLOSE IMPORT/EXPORT ELEMENT */
273 { 0x1B, M, "OPEN/CLOSE IMPORT/EXPORT ELEMENT" },
274 /* 1C OOOOO OOOM OOO RECEIVE DIAGNOSTIC RESULTS */
275 { 0x1C, ALL & ~(R | B), "RECEIVE DIAGNOSTIC RESULTS" },
276 /* 1D MMMMM MMOM MMM SEND DIAGNOSTIC */
277 { 0x1D, ALL & ~(R | B), "SEND DIAGNOSTIC" },
278 /* 1E OO OOOO O O PREVENT ALLOW MEDIUM REMOVAL */
279 { 0x1E, D | T | W | R | O | M | K | F, "PREVENT ALLOW MEDIUM REMOVAL" },
280 /* 1F */
281 /* 20 V VVV V */
282 /* 21 V VVV V */
283 /* 22 V VVV V */
284 /* 23 V V V V */
285 /* 23 O READ FORMAT CAPACITIES */
286 { 0x23, R, "READ FORMAT CAPACITIES" },
287 /* 24 V VV SET WINDOW */
288 { 0x24, S, "SET WINDOW" },
289 /* 25 M M M M READ CAPACITY(10) */
290 { 0x25, D | W | O | B, "READ CAPACITY(10)" },
291 /* 25 O READ CAPACITY */
292 { 0x25, R, "READ CAPACITY" },
293 /* 25 M READ CARD CAPACITY */
294 { 0x25, K, "READ CARD CAPACITY" },
295 /* 25 GET WINDOW */
296 { 0x25, S, "GET WINDOW" },
297 /* 26 V VV */
298 /* 27 V VV */
299 /* 28 M MOM MM READ(10) */
300 { 0x28, D | W | R | O | B | K | S, "READ(10)" },
301 /* 28 GET MESSAGE(10) */
302 { 0x28, C, "GET MESSAGE(10)" },
303 /* 29 V VVO READ GENERATION */
304 { 0x29, O, "READ GENERATION" },
305 /* 2A O MOM MO WRITE(10) */
306 { 0x2A, D | W | R | O | B | K, "WRITE(10)" },
307 /* 2A SEND(10) */
308 { 0x2A, S, "SEND(10)" },
309 /* 2A SEND MESSAGE(10) */
310 { 0x2A, C, "SEND MESSAGE(10)" },
311 /* 2B Z OOO O SEEK(10) */
312 { 0x2B, D | W | R | O | K, "SEEK(10)" },
313 /* 2B O LOCATE(10) */
314 { 0x2B, T, "LOCATE(10)" },
315 /* 2B O POSITION TO ELEMENT */
316 { 0x2B, M, "POSITION TO ELEMENT" },
317 /* 2C V OO ERASE(10) */
318 { 0x2C, R | O, "ERASE(10)" },
319 /* 2D O READ UPDATED BLOCK */
320 { 0x2D, O, "READ UPDATED BLOCK" },
321 /* 2D V */
322 /* 2E O OOO MO WRITE AND VERIFY(10) */
323 { 0x2E, D | W | R | O | B | K, "WRITE AND VERIFY(10)" },
324 /* 2F O OOO VERIFY(10) */
325 { 0x2F, D | W | R | O, "VERIFY(10)" },
326 /* 30 Z ZZZ SEARCH DATA HIGH(10) */
327 { 0x30, D | W | R | O, "SEARCH DATA HIGH(10)" },
328 /* 31 Z ZZZ SEARCH DATA EQUAL(10) */
329 { 0x31, D | W | R | O, "SEARCH DATA EQUAL(10)" },
330 /* 31 OBJECT POSITION */
331 { 0x31, S, "OBJECT POSITION" },
332 /* 32 Z ZZZ SEARCH DATA LOW(10) */
333 { 0x32, D | W | R | O, "SEARCH DATA LOW(10)" },
334 /* 33 Z OZO SET LIMITS(10) */
335 { 0x33, D | W | R | O, "SET LIMITS(10)" },
336 /* 34 O O O O PRE-FETCH(10) */
337 { 0x34, D | W | O | K, "PRE-FETCH(10)" },
338 /* 34 M READ POSITION */
339 { 0x34, T, "READ POSITION" },
340 /* 34 GET DATA BUFFER STATUS */
341 { 0x34, S, "GET DATA BUFFER STATUS" },
342 /* 35 O OOO MO SYNCHRONIZE CACHE(10) */
343 { 0x35, D | W | R | O | B | K, "SYNCHRONIZE CACHE(10)" },
344 /* 36 Z O O O LOCK UNLOCK CACHE(10) */
345 { 0x36, D | W | O | K, "LOCK UNLOCK CACHE(10)" },
346 /* 37 O O READ DEFECT DATA(10) */
347 { 0x37, D | O, "READ DEFECT DATA(10)" },
348 /* 37 O INITIALIZE ELEMENT STATUS WITH RANGE */
349 { 0x37, M, "INITIALIZE ELEMENT STATUS WITH RANGE" },
350 /* 38 O O O MEDIUM SCAN */
351 { 0x38, W | O | K, "MEDIUM SCAN" },
352 /* 39 ZZZZOZO Z COMPARE */
353 { 0x39, D | T | L | P | W | R | O | K | S, "COMPARE" },
354 /* 3A ZZZZOZO Z COPY AND VERIFY */
355 { 0x3A, D | T | L | P | W | R | O | K | S, "COPY AND VERIFY" },
356 /* 3B OOOOOOOOOOMOOO WRITE BUFFER */
357 { 0x3B, ALL, "WRITE BUFFER" },
358 /* 3C OOOOOOOOOO OOO READ BUFFER */
359 { 0x3C, ALL & ~(B), "READ BUFFER" },
360 /* 3D O UPDATE BLOCK */
361 { 0x3D, O, "UPDATE BLOCK" },
362 /* 3E O O O READ LONG(10) */
363 { 0x3E, D | W | O, "READ LONG(10)" },
364 /* 3F O O O WRITE LONG(10) */
365 { 0x3F, D | W | O, "WRITE LONG(10)" },
366 /* 40 ZZZZOZOZ CHANGE DEFINITION */
367 { 0x40, D | T | L | P | W | R | O | M | S | C, "CHANGE DEFINITION" },
368 /* 41 O WRITE SAME(10) */
369 { 0x41, D, "WRITE SAME(10)" },
370 /* 42 O READ SUB-CHANNEL */
371 { 0x42, R, "READ SUB-CHANNEL" },
372 /* 43 O READ TOC/PMA/ATIP */
373 { 0x43, R, "READ TOC/PMA/ATIP" },
374 /* 44 M M REPORT DENSITY SUPPORT */
375 { 0x44, T | V, "REPORT DENSITY SUPPORT" },
376 /* 44 READ HEADER */
377 /* 45 O PLAY AUDIO(10) */
378 { 0x45, R, "PLAY AUDIO(10)" },
379 /* 46 M GET CONFIGURATION */
380 { 0x46, R, "GET CONFIGURATION" },
381 /* 47 O PLAY AUDIO MSF */
382 { 0x47, R, "PLAY AUDIO MSF" },
383 /* 48 */
384 /* 49 */
385 /* 4A M GET EVENT STATUS NOTIFICATION */
386 { 0x4A, R, "GET EVENT STATUS NOTIFICATION" },
387 /* 4B O PAUSE/RESUME */
388 { 0x4B, R, "PAUSE/RESUME" },
389 /* 4C OOOOO OOOO OOO LOG SELECT */
390 { 0x4C, ALL & ~(R | B), "LOG SELECT" },
391 /* 4D OOOOO OOOO OMO LOG SENSE */
392 { 0x4D, ALL & ~(R | B), "LOG SENSE" },
393 /* 4E O STOP PLAY/SCAN */
394 { 0x4E, R, "STOP PLAY/SCAN" },
395 /* 4F */
396 /* 50 O XDWRITE(10) */
397 { 0x50, D, "XDWRITE(10)" },
398 /* 51 O XPWRITE(10) */
399 { 0x51, D, "XPWRITE(10)" },
400 /* 51 O READ DISC INFORMATION */
401 { 0x51, R, "READ DISC INFORMATION" },
402 /* 52 O XDREAD(10) */
403 { 0x52, D, "XDREAD(10)" },
404 /* 52 O READ TRACK INFORMATION */
405 { 0x52, R, "READ TRACK INFORMATION" },
406 /* 53 O RESERVE TRACK */
407 { 0x53, R, "RESERVE TRACK" },
408 /* 54 O SEND OPC INFORMATION */
409 { 0x54, R, "SEND OPC INFORMATION" },
410 /* 55 OOO OMOOOOMOMO MODE SELECT(10) */
411 { 0x55, ALL & ~(P), "MODE SELECT(10)" },
412 /* 56 ZZMZO OOOZ RESERVE(10) */
413 { 0x56, ALL & ~(R | B | K | V | F | C), "RESERVE(10)" },
414 /* 56 Z RESERVE ELEMENT(10) */
415 { 0x56, M, "RESERVE ELEMENT(10)" },
416 /* 57 ZZMZO OOOZ RELEASE(10) */
417 { 0x57, ALL & ~(R | B | K | V | F | C), "RELEASE(10)" },
418 /* 57 Z RELEASE ELEMENT(10) */
419 { 0x57, M, "RELEASE ELEMENT(10)" },
420 /* 58 O REPAIR TRACK */
421 { 0x58, R, "REPAIR TRACK" },
422 /* 59 */
423 /* 5A OOO OMOOOOMOMO MODE SENSE(10) */
424 { 0x5A, ALL & ~(P), "MODE SENSE(10)" },
425 /* 5B O CLOSE TRACK/SESSION */
426 { 0x5B, R, "CLOSE TRACK/SESSION" },
427 /* 5C O READ BUFFER CAPACITY */
428 { 0x5C, R, "READ BUFFER CAPACITY" },
429 /* 5D O SEND CUE SHEET */
430 { 0x5D, R, "SEND CUE SHEET" },
431 /* 5E OOOOO OOOO M PERSISTENT RESERVE IN */
432 { 0x5E, ALL & ~(R | B | K | V | C), "PERSISTENT RESERVE IN" },
433 /* 5F OOOOO OOOO M PERSISTENT RESERVE OUT */
434 { 0x5F, ALL & ~(R | B | K | V | C), "PERSISTENT RESERVE OUT" },
435 /* 7E OO O OOOO O extended CDB */
436 { 0x7E, D | T | R | M | A | E | B | V, "extended CDB" },
437 /* 7F O M variable length CDB (more than 16 bytes) */
438 { 0x7F, D | F, "variable length CDB (more than 16 bytes)" },
439 /* 80 Z XDWRITE EXTENDED(16) */
440 { 0x80, D, "XDWRITE EXTENDED(16)" },
441 /* 80 M WRITE FILEMARKS(16) */
442 { 0x80, T, "WRITE FILEMARKS(16)" },
443 /* 81 Z REBUILD(16) */
444 { 0x81, D, "REBUILD(16)" },
445 /* 81 O READ REVERSE(16) */
446 { 0x81, T, "READ REVERSE(16)" },
447 /* 82 Z REGENERATE(16) */
448 { 0x82, D, "REGENERATE(16)" },
449 /* 83 OOOOO O OO EXTENDED COPY */
450 { 0x83, D | T | L | P | W | O | K | V, "EXTENDED COPY" },
451 /* 84 OOOOO O OO RECEIVE COPY RESULTS */
452 { 0x84, D | T | L | P | W | O | K | V, "RECEIVE COPY RESULTS" },
453 /* 85 O O O ATA COMMAND PASS THROUGH(16) */
454 { 0x85, D | R | B, "ATA COMMAND PASS THROUGH(16)" },
455 /* 86 OO OO OOOOOOO ACCESS CONTROL IN */
456 { 0x86, ALL & ~(L | R | F), "ACCESS CONTROL IN" },
457 /* 87 OO OO OOOOOOO ACCESS CONTROL OUT */
458 { 0x87, ALL & ~(L | R | F), "ACCESS CONTROL OUT" },
459 /*
460 * XXX READ(16)/WRITE(16) were not listed for CD/DVE in op-num.txt
461 * but we had it since r1.40. Do we really want them?
462 */
463 /* 88 MM O O O READ(16) */
464 { 0x88, D | T | W | O | B, "READ(16)" },
465 /* 89 */
466 /* 8A OM O O O WRITE(16) */
467 { 0x8A, D | T | W | O | B, "WRITE(16)" },
468 /* 8B O ORWRITE */
469 { 0x8B, D, "ORWRITE" },
470 /* 8C OO O OO O M READ ATTRIBUTE */
471 { 0x8C, D | T | W | O | M | B | V, "READ ATTRIBUTE" },
472 /* 8D OO O OO O O WRITE ATTRIBUTE */
473 { 0x8D, D | T | W | O | M | B | V, "WRITE ATTRIBUTE" },
474 /* 8E O O O O WRITE AND VERIFY(16) */
475 { 0x8E, D | W | O | B, "WRITE AND VERIFY(16)" },
476 /* 8F OO O O O VERIFY(16) */
477 { 0x8F, D | T | W | O | B, "VERIFY(16)" },
478 /* 90 O O O O PRE-FETCH(16) */
479 { 0x90, D | W | O | B, "PRE-FETCH(16)" },
480 /* 91 O O O O SYNCHRONIZE CACHE(16) */
481 { 0x91, D | W | O | B, "SYNCHRONIZE CACHE(16)" },
482 /* 91 O SPACE(16) */
483 { 0x91, T, "SPACE(16)" },
484 /* 92 Z O O LOCK UNLOCK CACHE(16) */
485 { 0x92, D | W | O, "LOCK UNLOCK CACHE(16)" },
486 /* 92 O LOCATE(16) */
487 { 0x92, T, "LOCATE(16)" },
488 /* 93 O WRITE SAME(16) */
489 { 0x93, D, "WRITE SAME(16)" },
490 /* 93 M ERASE(16) */
491 { 0x93, T, "ERASE(16)" },
492 /* 94 [usage proposed by SCSI Socket Services project] */
493 /* 95 [usage proposed by SCSI Socket Services project] */
494 /* 96 [usage proposed by SCSI Socket Services project] */
495 /* 97 [usage proposed by SCSI Socket Services project] */
496 /* 98 */
497 /* 99 */
498 /* 9A */
499 /* 9B */
500 /* 9C */
501 /* 9D */
502 /* XXX KDM ALL for this? op-num.txt defines it for none.. */
503 /* 9E SERVICE ACTION IN(16) */
504 { 0x9E, ALL, "SERVICE ACTION IN(16)" },
505 /* XXX KDM ALL for this? op-num.txt defines it for ADC.. */
506 /* 9F M SERVICE ACTION OUT(16) */
507 { 0x9F, ALL, "SERVICE ACTION OUT(16)" },
508 /* A0 MMOOO OMMM OMO REPORT LUNS */
509 { 0xA0, ALL & ~(R | B), "REPORT LUNS" },
510 /* A1 O BLANK */
511 { 0xA1, R, "BLANK" },
512 /* A1 O O ATA COMMAND PASS THROUGH(12) */
513 { 0xA1, D | B, "ATA COMMAND PASS THROUGH(12)" },
514 /* A2 OO O O SECURITY PROTOCOL IN */
515 { 0xA2, D | T | R | V, "SECURITY PROTOCOL IN" },
516 /* A3 OOO O OOMOOOM MAINTENANCE (IN) */
517 { 0xA3, ALL & ~(P | R | F), "MAINTENANCE (IN)" },
518 /* A3 O SEND KEY */
519 { 0xA3, R, "SEND KEY" },
520 /* A4 OOO O OOOOOOO MAINTENANCE (OUT) */
521 { 0xA4, ALL & ~(P | R | F), "MAINTENANCE (OUT)" },
522 /* A4 O REPORT KEY */
523 { 0xA4, R, "REPORT KEY" },
524 /* A5 O O OM MOVE MEDIUM */
525 { 0xA5, T | W | O | M, "MOVE MEDIUM" },
526 /* A5 O PLAY AUDIO(12) */
527 { 0xA5, R, "PLAY AUDIO(12)" },
528 /* A6 O EXCHANGE MEDIUM */
529 { 0xA6, M, "EXCHANGE MEDIUM" },
530 /* A6 O LOAD/UNLOAD C/DVD */
531 { 0xA6, R, "LOAD/UNLOAD C/DVD" },
532 /* A7 ZZ O O MOVE MEDIUM ATTACHED */
533 { 0xA7, D | T | W | O, "MOVE MEDIUM ATTACHED" },
534 /* A7 O SET READ AHEAD */
535 { 0xA7, R, "SET READ AHEAD" },
536 /* A8 O OOO READ(12) */
537 { 0xA8, D | W | R | O, "READ(12)" },
538 /* A8 GET MESSAGE(12) */
539 { 0xA8, C, "GET MESSAGE(12)" },
540 /* A9 O SERVICE ACTION OUT(12) */
541 { 0xA9, V, "SERVICE ACTION OUT(12)" },
542 /* AA O OOO WRITE(12) */
543 { 0xAA, D | W | R | O, "WRITE(12)" },
544 /* AA SEND MESSAGE(12) */
545 { 0xAA, C, "SEND MESSAGE(12)" },
546 /* AB O O SERVICE ACTION IN(12) */
547 { 0xAB, R | V, "SERVICE ACTION IN(12)" },
548 /* AC O ERASE(12) */
549 { 0xAC, O, "ERASE(12)" },
550 /* AC O GET PERFORMANCE */
551 { 0xAC, R, "GET PERFORMANCE" },
552 /* AD O READ DVD STRUCTURE */
553 { 0xAD, R, "READ DVD STRUCTURE" },
554 /* AE O O O WRITE AND VERIFY(12) */
555 { 0xAE, D | W | O, "WRITE AND VERIFY(12)" },
556 /* AF O OZO VERIFY(12) */
557 { 0xAF, D | W | R | O, "VERIFY(12)" },
558 /* B0 ZZZ SEARCH DATA HIGH(12) */
559 { 0xB0, W | R | O, "SEARCH DATA HIGH(12)" },
560 /* B1 ZZZ SEARCH DATA EQUAL(12) */
561 { 0xB1, W | R | O, "SEARCH DATA EQUAL(12)" },
562 /* B2 ZZZ SEARCH DATA LOW(12) */
563 { 0xB2, W | R | O, "SEARCH DATA LOW(12)" },
564 /* B3 Z OZO SET LIMITS(12) */
565 { 0xB3, D | W | R | O, "SET LIMITS(12)" },
566 /* B4 ZZ OZO READ ELEMENT STATUS ATTACHED */
567 { 0xB4, D | T | W | R | O, "READ ELEMENT STATUS ATTACHED" },
568 /* B5 OO O O SECURITY PROTOCOL OUT */
569 { 0xB5, D | T | R | V, "SECURITY PROTOCOL OUT" },
570 /* B5 O REQUEST VOLUME ELEMENT ADDRESS */
571 { 0xB5, M, "REQUEST VOLUME ELEMENT ADDRESS" },
572 /* B6 O SEND VOLUME TAG */
573 { 0xB6, M, "SEND VOLUME TAG" },
574 /* B6 O SET STREAMING */
575 { 0xB6, R, "SET STREAMING" },
576 /* B7 O O READ DEFECT DATA(12) */
577 { 0xB7, D | O, "READ DEFECT DATA(12)" },
578 /* B8 O OZOM READ ELEMENT STATUS */
579 { 0xB8, T | W | R | O | M, "READ ELEMENT STATUS" },
580 /* B9 O READ CD MSF */
581 { 0xB9, R, "READ CD MSF" },
582 /* BA O O OOMO REDUNDANCY GROUP (IN) */
583 { 0xBA, D | W | O | M | A | E, "REDUNDANCY GROUP (IN)" },
584 /* BA O SCAN */
585 { 0xBA, R, "SCAN" },
586 /* BB O O OOOO REDUNDANCY GROUP (OUT) */
587 { 0xBB, D | W | O | M | A | E, "REDUNDANCY GROUP (OUT)" },
588 /* BB O SET CD SPEED */
589 { 0xBB, R, "SET CD SPEED" },
590 /* BC O O OOMO SPARE (IN) */
591 { 0xBC, D | W | O | M | A | E, "SPARE (IN)" },
592 /* BD O O OOOO SPARE (OUT) */
593 { 0xBD, D | W | O | M | A | E, "SPARE (OUT)" },
594 /* BD O MECHANISM STATUS */
595 { 0xBD, R, "MECHANISM STATUS" },
596 /* BE O O OOMO VOLUME SET (IN) */
597 { 0xBE, D | W | O | M | A | E, "VOLUME SET (IN)" },
598 /* BE O READ CD */
599 { 0xBE, R, "READ CD" },
600 /* BF O O OOOO VOLUME SET (OUT) */
601 { 0xBF, D | W | O | M | A | E, "VOLUME SET (OUT)" },
602 /* BF O SEND DVD STRUCTURE */
603 { 0xBF, R, "SEND DVD STRUCTURE" }
604 };
605
606 const char *
scsi_op_desc(u_int16_t opcode,struct scsi_inquiry_data * inq_data)607 scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data)
608 {
609 caddr_t match;
610 int i, j;
611 u_int32_t opmask;
612 u_int16_t pd_type;
613 int num_ops[2];
614 struct op_table_entry *table[2];
615 int num_tables;
616
617 pd_type = SID_TYPE(inq_data);
618
619 match = cam_quirkmatch((caddr_t)inq_data,
620 (caddr_t)scsi_op_quirk_table,
621 NELEM(scsi_op_quirk_table),
622 sizeof(*scsi_op_quirk_table),
623 scsi_inquiry_match);
624
625 if (match != NULL) {
626 table[0] = ((struct scsi_op_quirk_entry *)match)->op_table;
627 num_ops[0] = ((struct scsi_op_quirk_entry *)match)->num_ops;
628 table[1] = scsi_op_codes;
629 num_ops[1] = NELEM(scsi_op_codes);
630 num_tables = 2;
631 } else {
632 /*
633 * If this is true, we have a vendor specific opcode that
634 * wasn't covered in the quirk table.
635 */
636 if ((opcode > 0xBF) || ((opcode > 0x5F) && (opcode < 0x80)))
637 return("Vendor Specific Command");
638
639 table[0] = scsi_op_codes;
640 num_ops[0] = NELEM(scsi_op_codes);
641 num_tables = 1;
642 }
643
644 /* RBC is 'Simplified' Direct Access Device */
645 if (pd_type == T_RBC)
646 pd_type = T_DIRECT;
647
648 opmask = 1 << pd_type;
649
650 for (j = 0; j < num_tables; j++) {
651 for (i = 0;i < num_ops[j] && table[j][i].opcode <= opcode; i++){
652 if ((table[j][i].opcode == opcode)
653 && ((table[j][i].opmask & opmask) != 0))
654 return(table[j][i].desc);
655 }
656 }
657
658 /*
659 * If we can't find a match for the command in the table, we just
660 * assume it's a vendor specifc command.
661 */
662 return("Vendor Specific Command");
663
664 }
665
666 #else /* SCSI_NO_OP_STRINGS */
667
668 const char *
scsi_op_desc(u_int16_t opcode,struct scsi_inquiry_data * inq_data)669 scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data)
670 {
671 return("");
672 }
673
674 #endif
675
676
677 #if !defined(SCSI_NO_SENSE_STRINGS)
678 #define SST(asc, ascq, action, desc) \
679 asc, ascq, action, desc
680 #else
681 const char empty_string[] = "";
682
683 #define SST(asc, ascq, action, desc) \
684 asc, ascq, action, empty_string
685 #endif
686
687 const struct sense_key_table_entry sense_key_table[] =
688 {
689 { SSD_KEY_NO_SENSE, SS_NOP, "NO SENSE" },
690 { SSD_KEY_RECOVERED_ERROR, SS_NOP|SSQ_PRINT_SENSE, "RECOVERED ERROR" },
691 {
692 SSD_KEY_NOT_READY, SS_TUR|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
693 "NOT READY"
694 },
695 { SSD_KEY_MEDIUM_ERROR, SS_RDEF, "MEDIUM ERROR" },
696 { SSD_KEY_HARDWARE_ERROR, SS_RDEF, "HARDWARE FAILURE" },
697 { SSD_KEY_ILLEGAL_REQUEST, SS_FATAL|EINVAL, "ILLEGAL REQUEST" },
698 { SSD_KEY_UNIT_ATTENTION, SS_FATAL|ENXIO, "UNIT ATTENTION" },
699 { SSD_KEY_DATA_PROTECT, SS_FATAL|EACCES, "DATA PROTECT" },
700 { SSD_KEY_BLANK_CHECK, SS_FATAL|ENOSPC, "BLANK CHECK" },
701 { SSD_KEY_Vendor_Specific, SS_FATAL|EIO, "Vendor Specific" },
702 { SSD_KEY_COPY_ABORTED, SS_FATAL|EIO, "COPY ABORTED" },
703 { SSD_KEY_ABORTED_COMMAND, SS_RDEF, "ABORTED COMMAND" },
704 { SSD_KEY_EQUAL, SS_NOP, "EQUAL" },
705 { SSD_KEY_VOLUME_OVERFLOW, SS_FATAL|EIO, "VOLUME OVERFLOW" },
706 { SSD_KEY_MISCOMPARE, SS_NOP, "MISCOMPARE" },
707 { SSD_KEY_RESERVED, SS_FATAL|EIO, "RESERVED" }
708 };
709
710 const int sense_key_table_size = NELEM(sense_key_table);
711
712 static struct asc_table_entry quantum_fireball_entries[] = {
713 { SST(0x04, 0x0b, SS_START | SSQ_DECREMENT_COUNT | ENXIO,
714 "Logical unit not ready, initializing cmd. required") }
715 };
716
717 static struct asc_table_entry sony_mo_entries[] = {
718 { SST(0x04, 0x00, SS_START | SSQ_DECREMENT_COUNT | ENXIO,
719 "Logical unit not ready, cause not reportable") }
720 };
721
722 static struct scsi_sense_quirk_entry sense_quirk_table[] = {
723 {
724 /*
725 * XXX The Quantum Fireball ST and SE like to return 0x04 0x0b
726 * when they really should return 0x04 0x02.
727 */
728 {T_DIRECT, SIP_MEDIA_FIXED, "QUANTUM", "FIREBALL S*", "*"},
729 /*num_sense_keys*/0,
730 NELEM(quantum_fireball_entries),
731 /*sense key entries*/NULL,
732 quantum_fireball_entries
733 },
734 {
735 /*
736 * This Sony MO drive likes to return 0x04, 0x00 when it
737 * isn't spun up.
738 */
739 {T_DIRECT, SIP_MEDIA_REMOVABLE, "SONY", "SMO-*", "*"},
740 /*num_sense_keys*/0,
741 NELEM(sony_mo_entries),
742 /*sense key entries*/NULL,
743 sony_mo_entries
744 }
745 };
746
747 const int sense_quirk_table_size = NELEM(sense_quirk_table);
748
749 static struct asc_table_entry asc_table[] = {
750 /*
751 * From: http://www.t10.org/lists/asc-num.txt
752 * Modifications by Jung-uk Kim (jkim@FreeBSD.org)
753 */
754 /*
755 * File: ASC-NUM.TXT
756 *
757 * SCSI ASC/ASCQ Assignments
758 * Numeric Sorted Listing
759 * as of 7/29/08
760 *
761 * D - DIRECT ACCESS DEVICE (SBC-2) device column key
762 * .T - SEQUENTIAL ACCESS DEVICE (SSC) -------------------
763 * . L - PRINTER DEVICE (SSC) blank = reserved
764 * . P - PROCESSOR DEVICE (SPC) not blank = allowed
765 * . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC-2)
766 * . . R - CD DEVICE (MMC)
767 * . . O - OPTICAL MEMORY DEVICE (SBC-2)
768 * . . .M - MEDIA CHANGER DEVICE (SMC)
769 * . . . A - STORAGE ARRAY DEVICE (SCC)
770 * . . . E - ENCLOSURE SERVICES DEVICE (SES)
771 * . . . .B - SIMPLIFIED DIRECT-ACCESS DEVICE (RBC)
772 * . . . . K - OPTICAL CARD READER/WRITER DEVICE (OCRW)
773 * . . . . V - AUTOMATION/DRIVE INTERFACE (ADC)
774 * . . . . .F - OBJECT-BASED STORAGE (OSD)
775 * DTLPWROMAEBKVF
776 * ASC ASCQ Action
777 * Description
778 */
779 /* DTLPWROMAEBKVF */
780 { SST(0x00, 0x00, SS_NOP,
781 "No additional sense information") },
782 /* T */
783 { SST(0x00, 0x01, SS_RDEF,
784 "Filemark detected") },
785 /* T */
786 { SST(0x00, 0x02, SS_RDEF,
787 "End-of-partition/medium detected") },
788 /* T */
789 { SST(0x00, 0x03, SS_RDEF,
790 "Setmark detected") },
791 /* T */
792 { SST(0x00, 0x04, SS_RDEF,
793 "Beginning-of-partition/medium detected") },
794 /* TL */
795 { SST(0x00, 0x05, SS_RDEF,
796 "End-of-data detected") },
797 /* DTLPWROMAEBKVF */
798 { SST(0x00, 0x06, SS_RDEF,
799 "I/O process terminated") },
800 /* T */
801 { SST(0x00, 0x07, SS_RDEF, /* XXX TBD */
802 "Programmable early warning detected") },
803 /* R */
804 { SST(0x00, 0x11, SS_FATAL | EBUSY,
805 "Audio play operation in progress") },
806 /* R */
807 { SST(0x00, 0x12, SS_NOP,
808 "Audio play operation paused") },
809 /* R */
810 { SST(0x00, 0x13, SS_NOP,
811 "Audio play operation successfully completed") },
812 /* R */
813 { SST(0x00, 0x14, SS_RDEF,
814 "Audio play operation stopped due to error") },
815 /* R */
816 { SST(0x00, 0x15, SS_NOP,
817 "No current audio status to return") },
818 /* DTLPWROMAEBKVF */
819 { SST(0x00, 0x16, SS_FATAL | EBUSY,
820 "Operation in progress") },
821 /* DTL WROMAEBKVF */
822 { SST(0x00, 0x17, SS_RDEF,
823 "Cleaning requested") },
824 /* T */
825 { SST(0x00, 0x18, SS_RDEF, /* XXX TBD */
826 "Erase operation in progress") },
827 /* T */
828 { SST(0x00, 0x19, SS_RDEF, /* XXX TBD */
829 "Locate operation in progress") },
830 /* T */
831 { SST(0x00, 0x1A, SS_RDEF, /* XXX TBD */
832 "Rewind operation in progress") },
833 /* T */
834 { SST(0x00, 0x1B, SS_RDEF, /* XXX TBD */
835 "Set capacity operation in progress") },
836 /* T */
837 { SST(0x00, 0x1C, SS_RDEF, /* XXX TBD */
838 "Verify operation in progress") },
839 /* DT B */
840 { SST(0x00, 0x1D, SS_RDEF, /* XXX TBD */
841 "ATA pass through information available") },
842 /* DT R MAEBKV */
843 { SST(0x00, 0x1E, SS_RDEF, /* XXX TBD */
844 "Conflicting SA creation request") },
845 /* D W O BK */
846 { SST(0x01, 0x00, SS_RDEF,
847 "No index/sector signal") },
848 /* D WRO BK */
849 { SST(0x02, 0x00, SS_RDEF,
850 "No seek complete") },
851 /* DTL W O BK */
852 { SST(0x03, 0x00, SS_RDEF,
853 "Peripheral device write fault") },
854 /* T */
855 { SST(0x03, 0x01, SS_RDEF,
856 "No write current") },
857 /* T */
858 { SST(0x03, 0x02, SS_RDEF,
859 "Excessive write errors") },
860 /* DTLPWROMAEBKVF */
861 { SST(0x04, 0x00, SS_TUR | SSQ_MANY | SSQ_DECREMENT_COUNT | EIO,
862 "Logical unit not ready, cause not reportable") },
863 /* DTLPWROMAEBKVF */
864 { SST(0x04, 0x01, SS_TUR | SSQ_MANY | SSQ_DECREMENT_COUNT | EBUSY,
865 "Logical unit is in process of becoming ready") },
866 /* DTLPWROMAEBKVF */
867 { SST(0x04, 0x02, SS_START | SSQ_DECREMENT_COUNT | ENXIO,
868 "Logical unit not ready, initializing command required") },
869 /* DTLPWROMAEBKVF */
870 { SST(0x04, 0x03, SS_FATAL | ENXIO,
871 "Logical unit not ready, manual intervention required") },
872 /* DTL RO B */
873 { SST(0x04, 0x04, SS_FATAL | EBUSY,
874 "Logical unit not ready, format in progress") },
875 /* DT W O A BK F */
876 { SST(0x04, 0x05, SS_FATAL | EBUSY,
877 "Logical unit not ready, rebuild in progress") },
878 /* DT W O A BK */
879 { SST(0x04, 0x06, SS_FATAL | EBUSY,
880 "Logical unit not ready, recalculation in progress") },
881 /* DTLPWROMAEBKVF */
882 { SST(0x04, 0x07, SS_FATAL | EBUSY,
883 "Logical unit not ready, operation in progress") },
884 /* R */
885 { SST(0x04, 0x08, SS_FATAL | EBUSY,
886 "Logical unit not ready, long write in progress") },
887 /* DTLPWROMAEBKVF */
888 { SST(0x04, 0x09, SS_RDEF, /* XXX TBD */
889 "Logical unit not ready, self-test in progress") },
890 /* DTLPWROMAEBKVF */
891 { SST(0x04, 0x0A, SS_RDEF, /* XXX TBD */
892 "Logical unit not accessible, asymmetric access state transition")},
893 /* DTLPWROMAEBKVF */
894 { SST(0x04, 0x0B, SS_RDEF, /* XXX TBD */
895 "Logical unit not accessible, target port in standby state") },
896 /* DTLPWROMAEBKVF */
897 { SST(0x04, 0x0C, SS_RDEF, /* XXX TBD */
898 "Logical unit not accessible, target port in unavailable state") },
899 /* F */
900 { SST(0x04, 0x0D, SS_RDEF, /* XXX TBD */
901 "Logical unit not ready, structure check required") },
902 /* DT WROM B */
903 { SST(0x04, 0x10, SS_RDEF, /* XXX TBD */
904 "Logical unit not ready, auxiliary memory not accessible") },
905 /* DT WRO AEB VF */
906 { SST(0x04, 0x11, SS_RDEF, /* XXX TBD */
907 "Logical unit not ready, notify (enable spinup) required") },
908 /* M V */
909 { SST(0x04, 0x12, SS_RDEF, /* XXX TBD */
910 "Logical unit not ready, offline") },
911 /* DT R MAEBKV */
912 { SST(0x04, 0x13, SS_RDEF, /* XXX TBD */
913 "Logical unit not ready, SA creation in progress") },
914 /* DTL WROMAEBKVF */
915 { SST(0x05, 0x00, SS_RDEF,
916 "Logical unit does not respond to selection") },
917 /* D WROM BK */
918 { SST(0x06, 0x00, SS_RDEF,
919 "No reference position found") },
920 /* DTL WROM BK */
921 { SST(0x07, 0x00, SS_RDEF,
922 "Multiple peripheral devices selected") },
923 /* DTL WROMAEBKVF */
924 { SST(0x08, 0x00, SS_RDEF,
925 "Logical unit communication failure") },
926 /* DTL WROMAEBKVF */
927 { SST(0x08, 0x01, SS_RDEF,
928 "Logical unit communication time-out") },
929 /* DTL WROMAEBKVF */
930 { SST(0x08, 0x02, SS_RDEF,
931 "Logical unit communication parity error") },
932 /* DT ROM BK */
933 { SST(0x08, 0x03, SS_RDEF,
934 "Logical unit communication CRC error (Ultra-DMA/32)") },
935 /* DTLPWRO K */
936 { SST(0x08, 0x04, SS_RDEF, /* XXX TBD */
937 "Unreachable copy target") },
938 /* DT WRO B */
939 { SST(0x09, 0x00, SS_RDEF,
940 "Track following error") },
941 /* WRO K */
942 { SST(0x09, 0x01, SS_RDEF,
943 "Tracking servo failure") },
944 /* WRO K */
945 { SST(0x09, 0x02, SS_RDEF,
946 "Focus servo failure") },
947 /* WRO */
948 { SST(0x09, 0x03, SS_RDEF,
949 "Spindle servo failure") },
950 /* DT WRO B */
951 { SST(0x09, 0x04, SS_RDEF,
952 "Head select fault") },
953 /* DTLPWROMAEBKVF */
954 { SST(0x0A, 0x00, SS_FATAL | ENOSPC,
955 "Error log overflow") },
956 /* DTLPWROMAEBKVF */
957 { SST(0x0B, 0x00, SS_RDEF,
958 "Warning") },
959 /* DTLPWROMAEBKVF */
960 { SST(0x0B, 0x01, SS_RDEF,
961 "Warning - specified temperature exceeded") },
962 /* DTLPWROMAEBKVF */
963 { SST(0x0B, 0x02, SS_RDEF,
964 "Warning - enclosure degraded") },
965 /* DTLPWROMAEBKVF */
966 { SST(0x0B, 0x03, SS_RDEF, /* XXX TBD */
967 "Warning - background self-test failed") },
968 /* DTLPWRO AEBKVF */
969 { SST(0x0B, 0x04, SS_RDEF, /* XXX TBD */
970 "Warning - background pre-scan detected medium error") },
971 /* DTLPWRO AEBKVF */
972 { SST(0x0B, 0x05, SS_RDEF, /* XXX TBD */
973 "Warning - background medium scan detected medium error") },
974 /* DTLPWROMAEBKVF */
975 { SST(0x0B, 0x06, SS_RDEF, /* XXX TBD */
976 "Warning - non-volatile cache now volatile") },
977 /* DTLPWROMAEBKVF */
978 { SST(0x0B, 0x07, SS_RDEF, /* XXX TBD */
979 "Warning - degraded power to non-volatile cache") },
980 /* T R */
981 { SST(0x0C, 0x00, SS_RDEF,
982 "Write error") },
983 /* K */
984 { SST(0x0C, 0x01, SS_NOP | SSQ_PRINT_SENSE,
985 "Write error - recovered with auto reallocation") },
986 /* D W O BK */
987 { SST(0x0C, 0x02, SS_RDEF,
988 "Write error - auto reallocation failed") },
989 /* D W O BK */
990 { SST(0x0C, 0x03, SS_RDEF,
991 "Write error - recommend reassignment") },
992 /* DT W O B */
993 { SST(0x0C, 0x04, SS_RDEF,
994 "Compression check miscompare error") },
995 /* DT W O B */
996 { SST(0x0C, 0x05, SS_RDEF,
997 "Data expansion occurred during compression") },
998 /* DT W O B */
999 { SST(0x0C, 0x06, SS_RDEF,
1000 "Block not compressible") },
1001 /* R */
1002 { SST(0x0C, 0x07, SS_RDEF,
1003 "Write error - recovery needed") },
1004 /* R */
1005 { SST(0x0C, 0x08, SS_RDEF,
1006 "Write error - recovery failed") },
1007 /* R */
1008 { SST(0x0C, 0x09, SS_RDEF,
1009 "Write error - loss of streaming") },
1010 /* R */
1011 { SST(0x0C, 0x0A, SS_RDEF,
1012 "Write error - padding blocks added") },
1013 /* DT WROM B */
1014 { SST(0x0C, 0x0B, SS_RDEF, /* XXX TBD */
1015 "Auxiliary memory write error") },
1016 /* DTLPWRO AEBKVF */
1017 { SST(0x0C, 0x0C, SS_RDEF, /* XXX TBD */
1018 "Write error - unexpected unsolicited data") },
1019 /* DTLPWRO AEBKVF */
1020 { SST(0x0C, 0x0D, SS_RDEF, /* XXX TBD */
1021 "Write error - not enough unsolicited data") },
1022 /* R */
1023 { SST(0x0C, 0x0F, SS_RDEF, /* XXX TBD */
1024 "Defects in error window") },
1025 /* DTLPWRO A K */
1026 { SST(0x0D, 0x00, SS_RDEF, /* XXX TBD */
1027 "Error detected by third party temporary initiator") },
1028 /* DTLPWRO A K */
1029 { SST(0x0D, 0x01, SS_RDEF, /* XXX TBD */
1030 "Third party device failure") },
1031 /* DTLPWRO A K */
1032 { SST(0x0D, 0x02, SS_RDEF, /* XXX TBD */
1033 "Copy target device not reachable") },
1034 /* DTLPWRO A K */
1035 { SST(0x0D, 0x03, SS_RDEF, /* XXX TBD */
1036 "Incorrect copy target device type") },
1037 /* DTLPWRO A K */
1038 { SST(0x0D, 0x04, SS_RDEF, /* XXX TBD */
1039 "Copy target device data underrun") },
1040 /* DTLPWRO A K */
1041 { SST(0x0D, 0x05, SS_RDEF, /* XXX TBD */
1042 "Copy target device data overrun") },
1043 /* DT PWROMAEBK F */
1044 { SST(0x0E, 0x00, SS_RDEF, /* XXX TBD */
1045 "Invalid information unit") },
1046 /* DT PWROMAEBK F */
1047 { SST(0x0E, 0x01, SS_RDEF, /* XXX TBD */
1048 "Information unit too short") },
1049 /* DT PWROMAEBK F */
1050 { SST(0x0E, 0x02, SS_RDEF, /* XXX TBD */
1051 "Information unit too long") },
1052 /* DT P R MAEBK F */
1053 { SST(0x0E, 0x03, SS_RDEF, /* XXX TBD */
1054 "Invalid field in command information unit") },
1055 /* D W O BK */
1056 { SST(0x10, 0x00, SS_RDEF,
1057 "ID CRC or ECC error") },
1058 /* DT W O */
1059 { SST(0x10, 0x01, SS_RDEF, /* XXX TBD */
1060 "Logical block guard check failed") },
1061 /* DT W O */
1062 { SST(0x10, 0x02, SS_RDEF, /* XXX TBD */
1063 "Logical block application tag check failed") },
1064 /* DT W O */
1065 { SST(0x10, 0x03, SS_RDEF, /* XXX TBD */
1066 "Logical block reference tag check failed") },
1067 /* DT WRO BK */
1068 { SST(0x11, 0x00, SS_RDEF,
1069 "Unrecovered read error") },
1070 /* DT WRO BK */
1071 { SST(0x11, 0x01, SS_RDEF,
1072 "Read retries exhausted") },
1073 /* DT WRO BK */
1074 { SST(0x11, 0x02, SS_RDEF,
1075 "Error too long to correct") },
1076 /* DT W O BK */
1077 { SST(0x11, 0x03, SS_RDEF,
1078 "Multiple read errors") },
1079 /* D W O BK */
1080 { SST(0x11, 0x04, SS_RDEF,
1081 "Unrecovered read error - auto reallocate failed") },
1082 /* WRO B */
1083 { SST(0x11, 0x05, SS_RDEF,
1084 "L-EC uncorrectable error") },
1085 /* WRO B */
1086 { SST(0x11, 0x06, SS_RDEF,
1087 "CIRC unrecovered error") },
1088 /* W O B */
1089 { SST(0x11, 0x07, SS_RDEF,
1090 "Data re-synchronization error") },
1091 /* T */
1092 { SST(0x11, 0x08, SS_RDEF,
1093 "Incomplete block read") },
1094 /* T */
1095 { SST(0x11, 0x09, SS_RDEF,
1096 "No gap found") },
1097 /* DT O BK */
1098 { SST(0x11, 0x0A, SS_RDEF,
1099 "Miscorrected error") },
1100 /* D W O BK */
1101 { SST(0x11, 0x0B, SS_RDEF,
1102 "Unrecovered read error - recommend reassignment") },
1103 /* D W O BK */
1104 { SST(0x11, 0x0C, SS_RDEF,
1105 "Unrecovered read error - recommend rewrite the data") },
1106 /* DT WRO B */
1107 { SST(0x11, 0x0D, SS_RDEF,
1108 "De-compression CRC error") },
1109 /* DT WRO B */
1110 { SST(0x11, 0x0E, SS_RDEF,
1111 "Cannot decompress using declared algorithm") },
1112 /* R */
1113 { SST(0x11, 0x0F, SS_RDEF,
1114 "Error reading UPC/EAN number") },
1115 /* R */
1116 { SST(0x11, 0x10, SS_RDEF,
1117 "Error reading ISRC number") },
1118 /* R */
1119 { SST(0x11, 0x11, SS_RDEF,
1120 "Read error - loss of streaming") },
1121 /* DT WROM B */
1122 { SST(0x11, 0x12, SS_RDEF, /* XXX TBD */
1123 "Auxiliary memory read error") },
1124 /* DTLPWRO AEBKVF */
1125 { SST(0x11, 0x13, SS_RDEF, /* XXX TBD */
1126 "Read error - failed retransmission request") },
1127 /* D */
1128 { SST(0x11, 0x14, SS_RDEF, /* XXX TBD */
1129 "Read error - LBA marked bad by application client") },
1130 /* D W O BK */
1131 { SST(0x12, 0x00, SS_RDEF,
1132 "Address mark not found for ID field") },
1133 /* D W O BK */
1134 { SST(0x13, 0x00, SS_RDEF,
1135 "Address mark not found for data field") },
1136 /* DTL WRO BK */
1137 { SST(0x14, 0x00, SS_RDEF,
1138 "Recorded entity not found") },
1139 /* DT WRO BK */
1140 { SST(0x14, 0x01, SS_RDEF,
1141 "Record not found") },
1142 /* T */
1143 { SST(0x14, 0x02, SS_RDEF,
1144 "Filemark or setmark not found") },
1145 /* T */
1146 { SST(0x14, 0x03, SS_RDEF,
1147 "End-of-data not found") },
1148 /* T */
1149 { SST(0x14, 0x04, SS_RDEF,
1150 "Block sequence error") },
1151 /* DT W O BK */
1152 { SST(0x14, 0x05, SS_RDEF,
1153 "Record not found - recommend reassignment") },
1154 /* DT W O BK */
1155 { SST(0x14, 0x06, SS_RDEF,
1156 "Record not found - data auto-reallocated") },
1157 /* T */
1158 { SST(0x14, 0x07, SS_RDEF, /* XXX TBD */
1159 "Locate operation failure") },
1160 /* DTL WROM BK */
1161 { SST(0x15, 0x00, SS_RDEF,
1162 "Random positioning error") },
1163 /* DTL WROM BK */
1164 { SST(0x15, 0x01, SS_RDEF,
1165 "Mechanical positioning error") },
1166 /* DT WRO BK */
1167 { SST(0x15, 0x02, SS_RDEF,
1168 "Positioning error detected by read of medium") },
1169 /* D W O BK */
1170 { SST(0x16, 0x00, SS_RDEF,
1171 "Data synchronization mark error") },
1172 /* D W O BK */
1173 { SST(0x16, 0x01, SS_RDEF,
1174 "Data sync error - data rewritten") },
1175 /* D W O BK */
1176 { SST(0x16, 0x02, SS_RDEF,
1177 "Data sync error - recommend rewrite") },
1178 /* D W O BK */
1179 { SST(0x16, 0x03, SS_NOP | SSQ_PRINT_SENSE,
1180 "Data sync error - data auto-reallocated") },
1181 /* D W O BK */
1182 { SST(0x16, 0x04, SS_RDEF,
1183 "Data sync error - recommend reassignment") },
1184 /* DT WRO BK */
1185 { SST(0x17, 0x00, SS_NOP | SSQ_PRINT_SENSE,
1186 "Recovered data with no error correction applied") },
1187 /* DT WRO BK */
1188 { SST(0x17, 0x01, SS_NOP | SSQ_PRINT_SENSE,
1189 "Recovered data with retries") },
1190 /* DT WRO BK */
1191 { SST(0x17, 0x02, SS_NOP | SSQ_PRINT_SENSE,
1192 "Recovered data with positive head offset") },
1193 /* DT WRO BK */
1194 { SST(0x17, 0x03, SS_NOP | SSQ_PRINT_SENSE,
1195 "Recovered data with negative head offset") },
1196 /* WRO B */
1197 { SST(0x17, 0x04, SS_NOP | SSQ_PRINT_SENSE,
1198 "Recovered data with retries and/or CIRC applied") },
1199 /* D WRO BK */
1200 { SST(0x17, 0x05, SS_NOP | SSQ_PRINT_SENSE,
1201 "Recovered data using previous sector ID") },
1202 /* D W O BK */
1203 { SST(0x17, 0x06, SS_NOP | SSQ_PRINT_SENSE,
1204 "Recovered data without ECC - data auto-reallocated") },
1205 /* D WRO BK */
1206 { SST(0x17, 0x07, SS_NOP | SSQ_PRINT_SENSE,
1207 "Recovered data without ECC - recommend reassignment") },
1208 /* D WRO BK */
1209 { SST(0x17, 0x08, SS_NOP | SSQ_PRINT_SENSE,
1210 "Recovered data without ECC - recommend rewrite") },
1211 /* D WRO BK */
1212 { SST(0x17, 0x09, SS_NOP | SSQ_PRINT_SENSE,
1213 "Recovered data without ECC - data rewritten") },
1214 /* DT WRO BK */
1215 { SST(0x18, 0x00, SS_NOP | SSQ_PRINT_SENSE,
1216 "Recovered data with error correction applied") },
1217 /* D WRO BK */
1218 { SST(0x18, 0x01, SS_NOP | SSQ_PRINT_SENSE,
1219 "Recovered data with error corr. & retries applied") },
1220 /* D WRO BK */
1221 { SST(0x18, 0x02, SS_NOP | SSQ_PRINT_SENSE,
1222 "Recovered data - data auto-reallocated") },
1223 /* R */
1224 { SST(0x18, 0x03, SS_NOP | SSQ_PRINT_SENSE,
1225 "Recovered data with CIRC") },
1226 /* R */
1227 { SST(0x18, 0x04, SS_NOP | SSQ_PRINT_SENSE,
1228 "Recovered data with L-EC") },
1229 /* D WRO BK */
1230 { SST(0x18, 0x05, SS_NOP | SSQ_PRINT_SENSE,
1231 "Recovered data - recommend reassignment") },
1232 /* D WRO BK */
1233 { SST(0x18, 0x06, SS_NOP | SSQ_PRINT_SENSE,
1234 "Recovered data - recommend rewrite") },
1235 /* D W O BK */
1236 { SST(0x18, 0x07, SS_NOP | SSQ_PRINT_SENSE,
1237 "Recovered data with ECC - data rewritten") },
1238 /* R */
1239 { SST(0x18, 0x08, SS_RDEF, /* XXX TBD */
1240 "Recovered data with linking") },
1241 /* D O K */
1242 { SST(0x19, 0x00, SS_RDEF,
1243 "Defect list error") },
1244 /* D O K */
1245 { SST(0x19, 0x01, SS_RDEF,
1246 "Defect list not available") },
1247 /* D O K */
1248 { SST(0x19, 0x02, SS_RDEF,
1249 "Defect list error in primary list") },
1250 /* D O K */
1251 { SST(0x19, 0x03, SS_RDEF,
1252 "Defect list error in grown list") },
1253 /* DTLPWROMAEBKVF */
1254 { SST(0x1A, 0x00, SS_RDEF,
1255 "Parameter list length error") },
1256 /* DTLPWROMAEBKVF */
1257 { SST(0x1B, 0x00, SS_RDEF,
1258 "Synchronous data transfer error") },
1259 /* D O BK */
1260 { SST(0x1C, 0x00, SS_RDEF,
1261 "Defect list not found") },
1262 /* D O BK */
1263 { SST(0x1C, 0x01, SS_RDEF,
1264 "Primary defect list not found") },
1265 /* D O BK */
1266 { SST(0x1C, 0x02, SS_RDEF,
1267 "Grown defect list not found") },
1268 /* DT WRO BK */
1269 { SST(0x1D, 0x00, SS_FATAL,
1270 "Miscompare during verify operation") },
1271 /* D W O BK */
1272 { SST(0x1E, 0x00, SS_NOP | SSQ_PRINT_SENSE,
1273 "Recovered ID with ECC correction") },
1274 /* D O K */
1275 { SST(0x1F, 0x00, SS_RDEF,
1276 "Partial defect list transfer") },
1277 /* DTLPWROMAEBKVF */
1278 { SST(0x20, 0x00, SS_FATAL | EINVAL,
1279 "Invalid command operation code") },
1280 /* DT PWROMAEBK */
1281 { SST(0x20, 0x01, SS_RDEF, /* XXX TBD */
1282 "Access denied - initiator pending-enrolled") },
1283 /* DT PWROMAEBK */
1284 { SST(0x20, 0x02, SS_RDEF, /* XXX TBD */
1285 "Access denied - no access rights") },
1286 /* DT PWROMAEBK */
1287 { SST(0x20, 0x03, SS_RDEF, /* XXX TBD */
1288 "Access denied - invalid mgmt ID key") },
1289 /* T */
1290 { SST(0x20, 0x04, SS_RDEF, /* XXX TBD */
1291 "Illegal command while in write capable state") },
1292 /* T */
1293 { SST(0x20, 0x05, SS_RDEF, /* XXX TBD */
1294 "Obsolete") },
1295 /* T */
1296 { SST(0x20, 0x06, SS_RDEF, /* XXX TBD */
1297 "Illegal command while in explicit address mode") },
1298 /* T */
1299 { SST(0x20, 0x07, SS_RDEF, /* XXX TBD */
1300 "Illegal command while in implicit address mode") },
1301 /* DT PWROMAEBK */
1302 { SST(0x20, 0x08, SS_RDEF, /* XXX TBD */
1303 "Access denied - enrollment conflict") },
1304 /* DT PWROMAEBK */
1305 { SST(0x20, 0x09, SS_RDEF, /* XXX TBD */
1306 "Access denied - invalid LU identifier") },
1307 /* DT PWROMAEBK */
1308 { SST(0x20, 0x0A, SS_RDEF, /* XXX TBD */
1309 "Access denied - invalid proxy token") },
1310 /* DT PWROMAEBK */
1311 { SST(0x20, 0x0B, SS_RDEF, /* XXX TBD */
1312 "Access denied - ACL LUN conflict") },
1313 /* DT WRO BK */
1314 { SST(0x21, 0x00, SS_FATAL | EINVAL,
1315 "Logical block address out of range") },
1316 /* DT WROM BK */
1317 { SST(0x21, 0x01, SS_FATAL | EINVAL,
1318 "Invalid element address") },
1319 /* R */
1320 { SST(0x21, 0x02, SS_RDEF, /* XXX TBD */
1321 "Invalid address for write") },
1322 /* R */
1323 { SST(0x21, 0x03, SS_RDEF, /* XXX TBD */
1324 "Invalid write crossing layer jump") },
1325 /* D */
1326 { SST(0x22, 0x00, SS_FATAL | EINVAL,
1327 "Illegal function (use 20 00, 24 00, or 26 00)") },
1328 /* DTLPWROMAEBKVF */
1329 { SST(0x24, 0x00, SS_FATAL | EINVAL,
1330 "Invalid field in CDB") },
1331 /* DTLPWRO AEBKVF */
1332 { SST(0x24, 0x01, SS_RDEF, /* XXX TBD */
1333 "CDB decryption error") },
1334 /* T */
1335 { SST(0x24, 0x02, SS_RDEF, /* XXX TBD */
1336 "Obsolete") },
1337 /* T */
1338 { SST(0x24, 0x03, SS_RDEF, /* XXX TBD */
1339 "Obsolete") },
1340 /* F */
1341 { SST(0x24, 0x04, SS_RDEF, /* XXX TBD */
1342 "Security audit value frozen") },
1343 /* F */
1344 { SST(0x24, 0x05, SS_RDEF, /* XXX TBD */
1345 "Security working key frozen") },
1346 /* F */
1347 { SST(0x24, 0x06, SS_RDEF, /* XXX TBD */
1348 "NONCE not unique") },
1349 /* F */
1350 { SST(0x24, 0x07, SS_RDEF, /* XXX TBD */
1351 "NONCE timestamp out of range") },
1352 /* DT R MAEBKV */
1353 { SST(0x24, 0x08, SS_RDEF, /* XXX TBD */
1354 "Invalid XCDB") },
1355 /* DTLPWROMAEBKVF */
1356 { SST(0x25, 0x00, SS_FATAL | ENXIO,
1357 "Logical unit not supported") },
1358 /* DTLPWROMAEBKVF */
1359 { SST(0x26, 0x00, SS_FATAL | EINVAL,
1360 "Invalid field in parameter list") },
1361 /* DTLPWROMAEBKVF */
1362 { SST(0x26, 0x01, SS_FATAL | EINVAL,
1363 "Parameter not supported") },
1364 /* DTLPWROMAEBKVF */
1365 { SST(0x26, 0x02, SS_FATAL | EINVAL,
1366 "Parameter value invalid") },
1367 /* DTLPWROMAE K */
1368 { SST(0x26, 0x03, SS_FATAL | EINVAL,
1369 "Threshold parameters not supported") },
1370 /* DTLPWROMAEBKVF */
1371 { SST(0x26, 0x04, SS_FATAL | EINVAL,
1372 "Invalid release of persistent reservation") },
1373 /* DTLPWRO A BK */
1374 { SST(0x26, 0x05, SS_RDEF, /* XXX TBD */
1375 "Data decryption error") },
1376 /* DTLPWRO K */
1377 { SST(0x26, 0x06, SS_RDEF, /* XXX TBD */
1378 "Too many target descriptors") },
1379 /* DTLPWRO K */
1380 { SST(0x26, 0x07, SS_RDEF, /* XXX TBD */
1381 "Unsupported target descriptor type code") },
1382 /* DTLPWRO K */
1383 { SST(0x26, 0x08, SS_RDEF, /* XXX TBD */
1384 "Too many segment descriptors") },
1385 /* DTLPWRO K */
1386 { SST(0x26, 0x09, SS_RDEF, /* XXX TBD */
1387 "Unsupported segment descriptor type code") },
1388 /* DTLPWRO K */
1389 { SST(0x26, 0x0A, SS_RDEF, /* XXX TBD */
1390 "Unexpected inexact segment") },
1391 /* DTLPWRO K */
1392 { SST(0x26, 0x0B, SS_RDEF, /* XXX TBD */
1393 "Inline data length exceeded") },
1394 /* DTLPWRO K */
1395 { SST(0x26, 0x0C, SS_RDEF, /* XXX TBD */
1396 "Invalid operation for copy source or destination") },
1397 /* DTLPWRO K */
1398 { SST(0x26, 0x0D, SS_RDEF, /* XXX TBD */
1399 "Copy segment granularity violation") },
1400 /* DT PWROMAEBK */
1401 { SST(0x26, 0x0E, SS_RDEF, /* XXX TBD */
1402 "Invalid parameter while port is enabled") },
1403 /* F */
1404 { SST(0x26, 0x0F, SS_RDEF, /* XXX TBD */
1405 "Invalid data-out buffer integrity check value") },
1406 /* T */
1407 { SST(0x26, 0x10, SS_RDEF, /* XXX TBD */
1408 "Data decryption key fail limit reached") },
1409 /* T */
1410 { SST(0x26, 0x11, SS_RDEF, /* XXX TBD */
1411 "Incomplete key-associated data set") },
1412 /* T */
1413 { SST(0x26, 0x12, SS_RDEF, /* XXX TBD */
1414 "Vendor specific key reference not found") },
1415 /* DT WRO BK */
1416 { SST(0x27, 0x00, SS_FATAL | EACCES,
1417 "Write protected") },
1418 /* DT WRO BK */
1419 { SST(0x27, 0x01, SS_FATAL | EACCES,
1420 "Hardware write protected") },
1421 /* DT WRO BK */
1422 { SST(0x27, 0x02, SS_FATAL | EACCES,
1423 "Logical unit software write protected") },
1424 /* T R */
1425 { SST(0x27, 0x03, SS_FATAL | EACCES,
1426 "Associated write protect") },
1427 /* T R */
1428 { SST(0x27, 0x04, SS_FATAL | EACCES,
1429 "Persistent write protect") },
1430 /* T R */
1431 { SST(0x27, 0x05, SS_FATAL | EACCES,
1432 "Permanent write protect") },
1433 /* R F */
1434 { SST(0x27, 0x06, SS_RDEF, /* XXX TBD */
1435 "Conditional write protect") },
1436 /* DTLPWROMAEBKVF */
1437 { SST(0x28, 0x00, SS_FATAL | ENXIO,
1438 "Not ready to ready change, medium may have changed") },
1439 /* DT WROM B */
1440 { SST(0x28, 0x01, SS_FATAL | ENXIO,
1441 "Import or export element accessed") },
1442 /* R */
1443 { SST(0x28, 0x02, SS_RDEF, /* XXX TBD */
1444 "Format-layer may have changed") },
1445 /* M */
1446 { SST(0x28, 0x03, SS_RDEF, /* XXX TBD */
1447 "Import/export element accessed, medium changed") },
1448 /*
1449 * XXX JGibbs - All of these should use the same errno, but I don't
1450 * think ENXIO is the correct choice. Should we borrow from
1451 * the networking errnos? ECONNRESET anyone?
1452 */
1453 /* DTLPWROMAEBKVF */
1454 { SST(0x29, 0x00, SS_FATAL | ENXIO,
1455 "Power on, reset, or bus device reset occurred") },
1456 /* DTLPWROMAEBKVF */
1457 { SST(0x29, 0x01, SS_RDEF,
1458 "Power on occurred") },
1459 /* DTLPWROMAEBKVF */
1460 { SST(0x29, 0x02, SS_RDEF,
1461 "SCSI bus reset occurred") },
1462 /* DTLPWROMAEBKVF */
1463 { SST(0x29, 0x03, SS_RDEF,
1464 "Bus device reset function occurred") },
1465 /* DTLPWROMAEBKVF */
1466 { SST(0x29, 0x04, SS_RDEF,
1467 "Device internal reset") },
1468 /* DTLPWROMAEBKVF */
1469 { SST(0x29, 0x05, SS_RDEF,
1470 "Transceiver mode changed to single-ended") },
1471 /* DTLPWROMAEBKVF */
1472 { SST(0x29, 0x06, SS_RDEF,
1473 "Transceiver mode changed to LVD") },
1474 /* DTLPWROMAEBKVF */
1475 { SST(0x29, 0x07, SS_RDEF, /* XXX TBD */
1476 "I_T nexus loss occurred") },
1477 /* DTL WROMAEBKVF */
1478 { SST(0x2A, 0x00, SS_RDEF,
1479 "Parameters changed") },
1480 /* DTL WROMAEBKVF */
1481 { SST(0x2A, 0x01, SS_RDEF,
1482 "Mode parameters changed") },
1483 /* DTL WROMAE K */
1484 { SST(0x2A, 0x02, SS_RDEF,
1485 "Log parameters changed") },
1486 /* DTLPWROMAE K */
1487 { SST(0x2A, 0x03, SS_RDEF,
1488 "Reservations preempted") },
1489 /* DTLPWROMAE */
1490 { SST(0x2A, 0x04, SS_RDEF, /* XXX TBD */
1491 "Reservations released") },
1492 /* DTLPWROMAE */
1493 { SST(0x2A, 0x05, SS_RDEF, /* XXX TBD */
1494 "Registrations preempted") },
1495 /* DTLPWROMAEBKVF */
1496 { SST(0x2A, 0x06, SS_RDEF, /* XXX TBD */
1497 "Asymmetric access state changed") },
1498 /* DTLPWROMAEBKVF */
1499 { SST(0x2A, 0x07, SS_RDEF, /* XXX TBD */
1500 "Implicit asymmetric access state transition failed") },
1501 /* DT WROMAEBKVF */
1502 { SST(0x2A, 0x08, SS_RDEF, /* XXX TBD */
1503 "Priority changed") },
1504 /* D */
1505 { SST(0x2A, 0x09, SS_RDEF, /* XXX TBD */
1506 "Capacity data has changed") },
1507 /* DT */
1508 { SST(0x2A, 0x0A, SS_RDEF, /* XXX TBD */
1509 "Error history I_T nexus cleared") },
1510 /* DT */
1511 { SST(0x2A, 0x0B, SS_RDEF, /* XXX TBD */
1512 "Error history snapshot released") },
1513 /* F */
1514 { SST(0x2A, 0x0C, SS_RDEF, /* XXX TBD */
1515 "Error recovery attributes have changed") },
1516 /* T */
1517 { SST(0x2A, 0x0D, SS_RDEF, /* XXX TBD */
1518 "Data encryption capabilities changed") },
1519 /* DT M E V */
1520 { SST(0x2A, 0x10, SS_RDEF, /* XXX TBD */
1521 "Timestamp changed") },
1522 /* T */
1523 { SST(0x2A, 0x11, SS_RDEF, /* XXX TBD */
1524 "Data encryption parameters changed by another I_T nexus") },
1525 /* T */
1526 { SST(0x2A, 0x12, SS_RDEF, /* XXX TBD */
1527 "Data encryption parameters changed by vendor specific event") },
1528 /* T */
1529 { SST(0x2A, 0x13, SS_RDEF, /* XXX TBD */
1530 "Data encryption key instance counter has changed") },
1531 /* DT R MAEBKV */
1532 { SST(0x2A, 0x14, SS_RDEF, /* XXX TBD */
1533 "SA creation capabilities data has changed") },
1534 /* DTLPWRO K */
1535 { SST(0x2B, 0x00, SS_RDEF,
1536 "Copy cannot execute since host cannot disconnect") },
1537 /* DTLPWROMAEBKVF */
1538 { SST(0x2C, 0x00, SS_RDEF,
1539 "Command sequence error") },
1540 /* */
1541 { SST(0x2C, 0x01, SS_RDEF,
1542 "Too many windows specified") },
1543 /* */
1544 { SST(0x2C, 0x02, SS_RDEF,
1545 "Invalid combination of windows specified") },
1546 /* R */
1547 { SST(0x2C, 0x03, SS_RDEF,
1548 "Current program area is not empty") },
1549 /* R */
1550 { SST(0x2C, 0x04, SS_RDEF,
1551 "Current program area is empty") },
1552 /* B */
1553 { SST(0x2C, 0x05, SS_RDEF, /* XXX TBD */
1554 "Illegal power condition request") },
1555 /* R */
1556 { SST(0x2C, 0x06, SS_RDEF, /* XXX TBD */
1557 "Persistent prevent conflict") },
1558 /* DTLPWROMAEBKVF */
1559 { SST(0x2C, 0x07, SS_RDEF, /* XXX TBD */
1560 "Previous busy status") },
1561 /* DTLPWROMAEBKVF */
1562 { SST(0x2C, 0x08, SS_RDEF, /* XXX TBD */
1563 "Previous task set full status") },
1564 /* DTLPWROM EBKVF */
1565 { SST(0x2C, 0x09, SS_RDEF, /* XXX TBD */
1566 "Previous reservation conflict status") },
1567 /* F */
1568 { SST(0x2C, 0x0A, SS_RDEF, /* XXX TBD */
1569 "Partition or collection contains user objects") },
1570 /* T */
1571 { SST(0x2C, 0x0B, SS_RDEF, /* XXX TBD */
1572 "Not reserved") },
1573 /* T */
1574 { SST(0x2D, 0x00, SS_RDEF,
1575 "Overwrite error on update in place") },
1576 /* R */
1577 { SST(0x2E, 0x00, SS_RDEF, /* XXX TBD */
1578 "Insufficient time for operation") },
1579 /* DTLPWROMAEBKVF */
1580 { SST(0x2F, 0x00, SS_RDEF,
1581 "Commands cleared by another initiator") },
1582 /* D */
1583 { SST(0x2F, 0x01, SS_RDEF, /* XXX TBD */
1584 "Commands cleared by power loss notification") },
1585 /* DTLPWROMAEBKVF */
1586 { SST(0x2F, 0x02, SS_RDEF, /* XXX TBD */
1587 "Commands cleared by device server") },
1588 /* DT WROM BK */
1589 { SST(0x30, 0x00, SS_RDEF,
1590 "Incompatible medium installed") },
1591 /* DT WRO BK */
1592 { SST(0x30, 0x01, SS_RDEF,
1593 "Cannot read medium - unknown format") },
1594 /* DT WRO BK */
1595 { SST(0x30, 0x02, SS_RDEF,
1596 "Cannot read medium - incompatible format") },
1597 /* DT R K */
1598 { SST(0x30, 0x03, SS_RDEF,
1599 "Cleaning cartridge installed") },
1600 /* DT WRO BK */
1601 { SST(0x30, 0x04, SS_RDEF,
1602 "Cannot write medium - unknown format") },
1603 /* DT WRO BK */
1604 { SST(0x30, 0x05, SS_RDEF,
1605 "Cannot write medium - incompatible format") },
1606 /* DT WRO B */
1607 { SST(0x30, 0x06, SS_RDEF,
1608 "Cannot format medium - incompatible medium") },
1609 /* DTL WROMAEBKVF */
1610 { SST(0x30, 0x07, SS_RDEF,
1611 "Cleaning failure") },
1612 /* R */
1613 { SST(0x30, 0x08, SS_RDEF,
1614 "Cannot write - application code mismatch") },
1615 /* R */
1616 { SST(0x30, 0x09, SS_RDEF,
1617 "Current session not fixated for append") },
1618 /* DT WRO AEBK */
1619 { SST(0x30, 0x0A, SS_RDEF, /* XXX TBD */
1620 "Cleaning request rejected") },
1621 /* T */
1622 { SST(0x30, 0x0C, SS_RDEF, /* XXX TBD */
1623 "WORM medium - overwrite attempted") },
1624 /* T */
1625 { SST(0x30, 0x0D, SS_RDEF, /* XXX TBD */
1626 "WORM medium - integrity check") },
1627 /* R */
1628 { SST(0x30, 0x10, SS_RDEF, /* XXX TBD */
1629 "Medium not formatted") },
1630 /* M */
1631 { SST(0x30, 0x11, SS_RDEF, /* XXX TBD */
1632 "Incompatible volume type") },
1633 /* M */
1634 { SST(0x30, 0x12, SS_RDEF, /* XXX TBD */
1635 "Incompatible volume qualifier") },
1636 /* DT WRO BK */
1637 { SST(0x31, 0x00, SS_RDEF,
1638 "Medium format corrupted") },
1639 /* D L RO B */
1640 { SST(0x31, 0x01, SS_RDEF,
1641 "Format command failed") },
1642 /* R */
1643 { SST(0x31, 0x02, SS_RDEF, /* XXX TBD */
1644 "Zoned formatting failed due to spare linking") },
1645 /* D W O BK */
1646 { SST(0x32, 0x00, SS_RDEF,
1647 "No defect spare location available") },
1648 /* D W O BK */
1649 { SST(0x32, 0x01, SS_RDEF,
1650 "Defect list update failure") },
1651 /* T */
1652 { SST(0x33, 0x00, SS_RDEF,
1653 "Tape length error") },
1654 /* DTLPWROMAEBKVF */
1655 { SST(0x34, 0x00, SS_RDEF,
1656 "Enclosure failure") },
1657 /* DTLPWROMAEBKVF */
1658 { SST(0x35, 0x00, SS_RDEF,
1659 "Enclosure services failure") },
1660 /* DTLPWROMAEBKVF */
1661 { SST(0x35, 0x01, SS_RDEF,
1662 "Unsupported enclosure function") },
1663 /* DTLPWROMAEBKVF */
1664 { SST(0x35, 0x02, SS_RDEF,
1665 "Enclosure services unavailable") },
1666 /* DTLPWROMAEBKVF */
1667 { SST(0x35, 0x03, SS_RDEF,
1668 "Enclosure services transfer failure") },
1669 /* DTLPWROMAEBKVF */
1670 { SST(0x35, 0x04, SS_RDEF,
1671 "Enclosure services transfer refused") },
1672 /* DTL WROMAEBKVF */
1673 { SST(0x35, 0x05, SS_RDEF, /* XXX TBD */
1674 "Enclosure services checksum error") },
1675 /* L */
1676 { SST(0x36, 0x00, SS_RDEF,
1677 "Ribbon, ink, or toner failure") },
1678 /* DTL WROMAEBKVF */
1679 { SST(0x37, 0x00, SS_RDEF,
1680 "Rounded parameter") },
1681 /* B */
1682 { SST(0x38, 0x00, SS_RDEF, /* XXX TBD */
1683 "Event status notification") },
1684 /* B */
1685 { SST(0x38, 0x02, SS_RDEF, /* XXX TBD */
1686 "ESN - power management class event") },
1687 /* B */
1688 { SST(0x38, 0x04, SS_RDEF, /* XXX TBD */
1689 "ESN - media class event") },
1690 /* B */
1691 { SST(0x38, 0x06, SS_RDEF, /* XXX TBD */
1692 "ESN - device busy class event") },
1693 /* DTL WROMAE K */
1694 { SST(0x39, 0x00, SS_RDEF,
1695 "Saving parameters not supported") },
1696 /* DTL WROM BK */
1697 { SST(0x3A, 0x00, SS_FATAL | ENXIO,
1698 "Medium not present") },
1699 /* DT WROM BK */
1700 { SST(0x3A, 0x01, SS_FATAL | ENXIO,
1701 "Medium not present - tray closed") },
1702 /* DT WROM BK */
1703 { SST(0x3A, 0x02, SS_FATAL | ENXIO,
1704 "Medium not present - tray open") },
1705 /* DT WROM B */
1706 { SST(0x3A, 0x03, SS_RDEF, /* XXX TBD */
1707 "Medium not present - loadable") },
1708 /* DT WRO B */
1709 { SST(0x3A, 0x04, SS_RDEF, /* XXX TBD */
1710 "Medium not present - medium auxiliary memory accessible") },
1711 /* TL */
1712 { SST(0x3B, 0x00, SS_RDEF,
1713 "Sequential positioning error") },
1714 /* T */
1715 { SST(0x3B, 0x01, SS_RDEF,
1716 "Tape position error at beginning-of-medium") },
1717 /* T */
1718 { SST(0x3B, 0x02, SS_RDEF,
1719 "Tape position error at end-of-medium") },
1720 /* L */
1721 { SST(0x3B, 0x03, SS_RDEF,
1722 "Tape or electronic vertical forms unit not ready") },
1723 /* L */
1724 { SST(0x3B, 0x04, SS_RDEF,
1725 "Slew failure") },
1726 /* L */
1727 { SST(0x3B, 0x05, SS_RDEF,
1728 "Paper jam") },
1729 /* L */
1730 { SST(0x3B, 0x06, SS_RDEF,
1731 "Failed to sense top-of-form") },
1732 /* L */
1733 { SST(0x3B, 0x07, SS_RDEF,
1734 "Failed to sense bottom-of-form") },
1735 /* T */
1736 { SST(0x3B, 0x08, SS_RDEF,
1737 "Reposition error") },
1738 /* */
1739 { SST(0x3B, 0x09, SS_RDEF,
1740 "Read past end of medium") },
1741 /* */
1742 { SST(0x3B, 0x0A, SS_RDEF,
1743 "Read past beginning of medium") },
1744 /* */
1745 { SST(0x3B, 0x0B, SS_RDEF,
1746 "Position past end of medium") },
1747 /* T */
1748 { SST(0x3B, 0x0C, SS_RDEF,
1749 "Position past beginning of medium") },
1750 /* DT WROM BK */
1751 { SST(0x3B, 0x0D, SS_FATAL | ENOSPC,
1752 "Medium destination element full") },
1753 /* DT WROM BK */
1754 { SST(0x3B, 0x0E, SS_RDEF,
1755 "Medium source element empty") },
1756 /* R */
1757 { SST(0x3B, 0x0F, SS_RDEF,
1758 "End of medium reached") },
1759 /* DT WROM BK */
1760 { SST(0x3B, 0x11, SS_RDEF,
1761 "Medium magazine not accessible") },
1762 /* DT WROM BK */
1763 { SST(0x3B, 0x12, SS_RDEF,
1764 "Medium magazine removed") },
1765 /* DT WROM BK */
1766 { SST(0x3B, 0x13, SS_RDEF,
1767 "Medium magazine inserted") },
1768 /* DT WROM BK */
1769 { SST(0x3B, 0x14, SS_RDEF,
1770 "Medium magazine locked") },
1771 /* DT WROM BK */
1772 { SST(0x3B, 0x15, SS_RDEF,
1773 "Medium magazine unlocked") },
1774 /* R */
1775 { SST(0x3B, 0x16, SS_RDEF, /* XXX TBD */
1776 "Mechanical positioning or changer error") },
1777 /* F */
1778 { SST(0x3B, 0x17, SS_RDEF, /* XXX TBD */
1779 "Read past end of user object") },
1780 /* M */
1781 { SST(0x3B, 0x18, SS_RDEF, /* XXX TBD */
1782 "Element disabled") },
1783 /* M */
1784 { SST(0x3B, 0x19, SS_RDEF, /* XXX TBD */
1785 "Element enabled") },
1786 /* M */
1787 { SST(0x3B, 0x1A, SS_RDEF, /* XXX TBD */
1788 "Data transfer device removed") },
1789 /* M */
1790 { SST(0x3B, 0x1B, SS_RDEF, /* XXX TBD */
1791 "Data transfer device inserted") },
1792 /* DTLPWROMAE K */
1793 { SST(0x3D, 0x00, SS_RDEF,
1794 "Invalid bits in IDENTIFY message") },
1795 /* DTLPWROMAEBKVF */
1796 { SST(0x3E, 0x00, SS_RDEF,
1797 "Logical unit has not self-configured yet") },
1798 /* DTLPWROMAEBKVF */
1799 { SST(0x3E, 0x01, SS_RDEF,
1800 "Logical unit failure") },
1801 /* DTLPWROMAEBKVF */
1802 { SST(0x3E, 0x02, SS_RDEF,
1803 "Timeout on logical unit") },
1804 /* DTLPWROMAEBKVF */
1805 { SST(0x3E, 0x03, SS_RDEF, /* XXX TBD */
1806 "Logical unit failed self-test") },
1807 /* DTLPWROMAEBKVF */
1808 { SST(0x3E, 0x04, SS_RDEF, /* XXX TBD */
1809 "Logical unit unable to update self-test log") },
1810 /* DTLPWROMAEBKVF */
1811 { SST(0x3F, 0x00, SS_RDEF,
1812 "Target operating conditions have changed") },
1813 /* DTLPWROMAEBKVF */
1814 { SST(0x3F, 0x01, SS_RDEF,
1815 "Microcode has been changed") },
1816 /* DTLPWROM BK */
1817 { SST(0x3F, 0x02, SS_RDEF,
1818 "Changed operating definition") },
1819 /* DTLPWROMAEBKVF */
1820 { SST(0x3F, 0x03, SS_RDEF,
1821 "INQUIRY data has changed") },
1822 /* DT WROMAEBK */
1823 { SST(0x3F, 0x04, SS_RDEF,
1824 "Component device attached") },
1825 /* DT WROMAEBK */
1826 { SST(0x3F, 0x05, SS_RDEF,
1827 "Device identifier changed") },
1828 /* DT WROMAEB */
1829 { SST(0x3F, 0x06, SS_RDEF,
1830 "Redundancy group created or modified") },
1831 /* DT WROMAEB */
1832 { SST(0x3F, 0x07, SS_RDEF,
1833 "Redundancy group deleted") },
1834 /* DT WROMAEB */
1835 { SST(0x3F, 0x08, SS_RDEF,
1836 "Spare created or modified") },
1837 /* DT WROMAEB */
1838 { SST(0x3F, 0x09, SS_RDEF,
1839 "Spare deleted") },
1840 /* DT WROMAEBK */
1841 { SST(0x3F, 0x0A, SS_RDEF,
1842 "Volume set created or modified") },
1843 /* DT WROMAEBK */
1844 { SST(0x3F, 0x0B, SS_RDEF,
1845 "Volume set deleted") },
1846 /* DT WROMAEBK */
1847 { SST(0x3F, 0x0C, SS_RDEF,
1848 "Volume set deassigned") },
1849 /* DT WROMAEBK */
1850 { SST(0x3F, 0x0D, SS_RDEF,
1851 "Volume set reassigned") },
1852 /* DTLPWROMAE */
1853 { SST(0x3F, 0x0E, SS_RDEF, /* XXX TBD */
1854 "Reported LUNs data has changed") },
1855 /* DTLPWROMAEBKVF */
1856 { SST(0x3F, 0x0F, SS_RDEF, /* XXX TBD */
1857 "Echo buffer overwritten") },
1858 /* DT WROM B */
1859 { SST(0x3F, 0x10, SS_RDEF, /* XXX TBD */
1860 "Medium loadable") },
1861 /* DT WROM B */
1862 { SST(0x3F, 0x11, SS_RDEF, /* XXX TBD */
1863 "Medium auxiliary memory accessible") },
1864 /* DTLPWR MAEBK F */
1865 { SST(0x3F, 0x12, SS_RDEF, /* XXX TBD */
1866 "iSCSI IP address added") },
1867 /* DTLPWR MAEBK F */
1868 { SST(0x3F, 0x13, SS_RDEF, /* XXX TBD */
1869 "iSCSI IP address removed") },
1870 /* DTLPWR MAEBK F */
1871 { SST(0x3F, 0x14, SS_RDEF, /* XXX TBD */
1872 "iSCSI IP address changed") },
1873 /* D */
1874 { SST(0x40, 0x00, SS_RDEF,
1875 "RAM failure") }, /* deprecated - use 40 NN instead */
1876 /* DTLPWROMAEBKVF */
1877 { SST(0x40, 0x80, SS_RDEF,
1878 "Diagnostic failure: ASCQ = Component ID") },
1879 /* DTLPWROMAEBKVF */
1880 { SST(0x40, 0xFF, SS_RDEF | SSQ_RANGE,
1881 NULL) }, /* Range 0x80->0xFF */
1882 /* D */
1883 { SST(0x41, 0x00, SS_RDEF,
1884 "Data path failure") }, /* deprecated - use 40 NN instead */
1885 /* D */
1886 { SST(0x42, 0x00, SS_RDEF,
1887 "Power-on or self-test failure") },
1888 /* deprecated - use 40 NN instead */
1889 /* DTLPWROMAEBKVF */
1890 { SST(0x43, 0x00, SS_RDEF,
1891 "Message error") },
1892 /* DTLPWROMAEBKVF */
1893 { SST(0x44, 0x00, SS_RDEF,
1894 "Internal target failure") },
1895 /* DT B */
1896 { SST(0x44, 0x71, SS_RDEF, /* XXX TBD */
1897 "ATA device failed set features") },
1898 /* DTLPWROMAEBKVF */
1899 { SST(0x45, 0x00, SS_RDEF,
1900 "Select or reselect failure") },
1901 /* DTLPWROM BK */
1902 { SST(0x46, 0x00, SS_RDEF,
1903 "Unsuccessful soft reset") },
1904 /* DTLPWROMAEBKVF */
1905 { SST(0x47, 0x00, SS_RDEF,
1906 "SCSI parity error") },
1907 /* DTLPWROMAEBKVF */
1908 { SST(0x47, 0x01, SS_RDEF, /* XXX TBD */
1909 "Data phase CRC error detected") },
1910 /* DTLPWROMAEBKVF */
1911 { SST(0x47, 0x02, SS_RDEF, /* XXX TBD */
1912 "SCSI parity error detected during ST data phase") },
1913 /* DTLPWROMAEBKVF */
1914 { SST(0x47, 0x03, SS_RDEF, /* XXX TBD */
1915 "Information unit iuCRC error detected") },
1916 /* DTLPWROMAEBKVF */
1917 { SST(0x47, 0x04, SS_RDEF, /* XXX TBD */
1918 "Asynchronous information protection error detected") },
1919 /* DTLPWROMAEBKVF */
1920 { SST(0x47, 0x05, SS_RDEF, /* XXX TBD */
1921 "Protocol service CRC error") },
1922 /* DT MAEBKVF */
1923 { SST(0x47, 0x06, SS_RDEF, /* XXX TBD */
1924 "PHY test function in progress") },
1925 /* DT PWROMAEBK */
1926 { SST(0x47, 0x7F, SS_RDEF, /* XXX TBD */
1927 "Some commands cleared by iSCSI protocol event") },
1928 /* DTLPWROMAEBKVF */
1929 { SST(0x48, 0x00, SS_RDEF,
1930 "Initiator detected error message received") },
1931 /* DTLPWROMAEBKVF */
1932 { SST(0x49, 0x00, SS_RDEF,
1933 "Invalid message error") },
1934 /* DTLPWROMAEBKVF */
1935 { SST(0x4A, 0x00, SS_RDEF,
1936 "Command phase error") },
1937 /* DTLPWROMAEBKVF */
1938 { SST(0x4B, 0x00, SS_RDEF,
1939 "Data phase error") },
1940 /* DT PWROMAEBK */
1941 { SST(0x4B, 0x01, SS_RDEF, /* XXX TBD */
1942 "Invalid target port transfer tag received") },
1943 /* DT PWROMAEBK */
1944 { SST(0x4B, 0x02, SS_RDEF, /* XXX TBD */
1945 "Too much write data") },
1946 /* DT PWROMAEBK */
1947 { SST(0x4B, 0x03, SS_RDEF, /* XXX TBD */
1948 "ACK/NAK timeout") },
1949 /* DT PWROMAEBK */
1950 { SST(0x4B, 0x04, SS_RDEF, /* XXX TBD */
1951 "NAK received") },
1952 /* DT PWROMAEBK */
1953 { SST(0x4B, 0x05, SS_RDEF, /* XXX TBD */
1954 "Data offset error") },
1955 /* DT PWROMAEBK */
1956 { SST(0x4B, 0x06, SS_RDEF, /* XXX TBD */
1957 "Initiator response timeout") },
1958 /* DTLPWROMAEBKVF */
1959 { SST(0x4C, 0x00, SS_RDEF,
1960 "Logical unit failed self-configuration") },
1961 /* DTLPWROMAEBKVF */
1962 { SST(0x4D, 0x00, SS_RDEF,
1963 "Tagged overlapped commands: ASCQ = Queue tag ID") },
1964 /* DTLPWROMAEBKVF */
1965 { SST(0x4D, 0xFF, SS_RDEF | SSQ_RANGE,
1966 NULL) }, /* Range 0x00->0xFF */
1967 /* DTLPWROMAEBKVF */
1968 { SST(0x4E, 0x00, SS_RDEF,
1969 "Overlapped commands attempted") },
1970 /* T */
1971 { SST(0x50, 0x00, SS_RDEF,
1972 "Write append error") },
1973 /* T */
1974 { SST(0x50, 0x01, SS_RDEF,
1975 "Write append position error") },
1976 /* T */
1977 { SST(0x50, 0x02, SS_RDEF,
1978 "Position error related to timing") },
1979 /* T RO */
1980 { SST(0x51, 0x00, SS_RDEF,
1981 "Erase failure") },
1982 /* R */
1983 { SST(0x51, 0x01, SS_RDEF, /* XXX TBD */
1984 "Erase failure - incomplete erase operation detected") },
1985 /* T */
1986 { SST(0x52, 0x00, SS_RDEF,
1987 "Cartridge fault") },
1988 /* DTL WROM BK */
1989 { SST(0x53, 0x00, SS_RDEF,
1990 "Media load or eject failed") },
1991 /* T */
1992 { SST(0x53, 0x01, SS_RDEF,
1993 "Unload tape failure") },
1994 /* DT WROM BK */
1995 { SST(0x53, 0x02, SS_RDEF,
1996 "Medium removal prevented") },
1997 /* M */
1998 { SST(0x53, 0x03, SS_RDEF, /* XXX TBD */
1999 "Medium removal prevented by data transfer element") },
2000 /* T */
2001 { SST(0x53, 0x04, SS_RDEF, /* XXX TBD */
2002 "Medium thread or unthread failure") },
2003 /* P */
2004 { SST(0x54, 0x00, SS_RDEF,
2005 "SCSI to host system interface failure") },
2006 /* P */
2007 { SST(0x55, 0x00, SS_RDEF,
2008 "System resource failure") },
2009 /* D O BK */
2010 { SST(0x55, 0x01, SS_FATAL | ENOSPC,
2011 "System buffer full") },
2012 /* DTLPWROMAE K */
2013 { SST(0x55, 0x02, SS_RDEF, /* XXX TBD */
2014 "Insufficient reservation resources") },
2015 /* DTLPWROMAE K */
2016 { SST(0x55, 0x03, SS_RDEF, /* XXX TBD */
2017 "Insufficient resources") },
2018 /* DTLPWROMAE K */
2019 { SST(0x55, 0x04, SS_RDEF, /* XXX TBD */
2020 "Insufficient registration resources") },
2021 /* DT PWROMAEBK */
2022 { SST(0x55, 0x05, SS_RDEF, /* XXX TBD */
2023 "Insufficient access control resources") },
2024 /* DT WROM B */
2025 { SST(0x55, 0x06, SS_RDEF, /* XXX TBD */
2026 "Auxiliary memory out of space") },
2027 /* F */
2028 { SST(0x55, 0x07, SS_RDEF, /* XXX TBD */
2029 "Quota error") },
2030 /* T */
2031 { SST(0x55, 0x08, SS_RDEF, /* XXX TBD */
2032 "Maximum number of supplemental decryption keys exceeded") },
2033 /* M */
2034 { SST(0x55, 0x09, SS_RDEF, /* XXX TBD */
2035 "Medium auxiliary memory not accessible") },
2036 /* M */
2037 { SST(0x55, 0x0A, SS_RDEF, /* XXX TBD */
2038 "Data currently unavailable") },
2039 /* R */
2040 { SST(0x57, 0x00, SS_RDEF,
2041 "Unable to recover table-of-contents") },
2042 /* O */
2043 { SST(0x58, 0x00, SS_RDEF,
2044 "Generation does not exist") },
2045 /* O */
2046 { SST(0x59, 0x00, SS_RDEF,
2047 "Updated block read") },
2048 /* DTLPWRO BK */
2049 { SST(0x5A, 0x00, SS_RDEF,
2050 "Operator request or state change input") },
2051 /* DT WROM BK */
2052 { SST(0x5A, 0x01, SS_RDEF,
2053 "Operator medium removal request") },
2054 /* DT WRO A BK */
2055 { SST(0x5A, 0x02, SS_RDEF,
2056 "Operator selected write protect") },
2057 /* DT WRO A BK */
2058 { SST(0x5A, 0x03, SS_RDEF,
2059 "Operator selected write permit") },
2060 /* DTLPWROM K */
2061 { SST(0x5B, 0x00, SS_RDEF,
2062 "Log exception") },
2063 /* DTLPWROM K */
2064 { SST(0x5B, 0x01, SS_RDEF,
2065 "Threshold condition met") },
2066 /* DTLPWROM K */
2067 { SST(0x5B, 0x02, SS_RDEF,
2068 "Log counter at maximum") },
2069 /* DTLPWROM K */
2070 { SST(0x5B, 0x03, SS_RDEF,
2071 "Log list codes exhausted") },
2072 /* D O */
2073 { SST(0x5C, 0x00, SS_RDEF,
2074 "RPL status change") },
2075 /* D O */
2076 { SST(0x5C, 0x01, SS_NOP | SSQ_PRINT_SENSE,
2077 "Spindles synchronized") },
2078 /* D O */
2079 { SST(0x5C, 0x02, SS_RDEF,
2080 "Spindles not synchronized") },
2081 /* DTLPWROMAEBKVF */
2082 { SST(0x5D, 0x00, SS_RDEF,
2083 "Failure prediction threshold exceeded") },
2084 /* R B */
2085 { SST(0x5D, 0x01, SS_RDEF, /* XXX TBD */
2086 "Media failure prediction threshold exceeded") },
2087 /* R */
2088 { SST(0x5D, 0x02, SS_RDEF, /* XXX TBD */
2089 "Logical unit failure prediction threshold exceeded") },
2090 /* R */
2091 { SST(0x5D, 0x03, SS_RDEF, /* XXX TBD */
2092 "Spare area exhaustion prediction threshold exceeded") },
2093 /* D B */
2094 { SST(0x5D, 0x10, SS_RDEF, /* XXX TBD */
2095 "Hardware impending failure general hard drive failure") },
2096 /* D B */
2097 { SST(0x5D, 0x11, SS_RDEF, /* XXX TBD */
2098 "Hardware impending failure drive error rate too high") },
2099 /* D B */
2100 { SST(0x5D, 0x12, SS_RDEF, /* XXX TBD */
2101 "Hardware impending failure data error rate too high") },
2102 /* D B */
2103 { SST(0x5D, 0x13, SS_RDEF, /* XXX TBD */
2104 "Hardware impending failure seek error rate too high") },
2105 /* D B */
2106 { SST(0x5D, 0x14, SS_RDEF, /* XXX TBD */
2107 "Hardware impending failure too many block reassigns") },
2108 /* D B */
2109 { SST(0x5D, 0x15, SS_RDEF, /* XXX TBD */
2110 "Hardware impending failure access times too high") },
2111 /* D B */
2112 { SST(0x5D, 0x16, SS_RDEF, /* XXX TBD */
2113 "Hardware impending failure start unit times too high") },
2114 /* D B */
2115 { SST(0x5D, 0x17, SS_RDEF, /* XXX TBD */
2116 "Hardware impending failure channel parametrics") },
2117 /* D B */
2118 { SST(0x5D, 0x18, SS_RDEF, /* XXX TBD */
2119 "Hardware impending failure controller detected") },
2120 /* D B */
2121 { SST(0x5D, 0x19, SS_RDEF, /* XXX TBD */
2122 "Hardware impending failure throughput performance") },
2123 /* D B */
2124 { SST(0x5D, 0x1A, SS_RDEF, /* XXX TBD */
2125 "Hardware impending failure seek time performance") },
2126 /* D B */
2127 { SST(0x5D, 0x1B, SS_RDEF, /* XXX TBD */
2128 "Hardware impending failure spin-up retry count") },
2129 /* D B */
2130 { SST(0x5D, 0x1C, SS_RDEF, /* XXX TBD */
2131 "Hardware impending failure drive calibration retry count") },
2132 /* D B */
2133 { SST(0x5D, 0x20, SS_RDEF, /* XXX TBD */
2134 "Controller impending failure general hard drive failure") },
2135 /* D B */
2136 { SST(0x5D, 0x21, SS_RDEF, /* XXX TBD */
2137 "Controller impending failure drive error rate too high") },
2138 /* D B */
2139 { SST(0x5D, 0x22, SS_RDEF, /* XXX TBD */
2140 "Controller impending failure data error rate too high") },
2141 /* D B */
2142 { SST(0x5D, 0x23, SS_RDEF, /* XXX TBD */
2143 "Controller impending failure seek error rate too high") },
2144 /* D B */
2145 { SST(0x5D, 0x24, SS_RDEF, /* XXX TBD */
2146 "Controller impending failure too many block reassigns") },
2147 /* D B */
2148 { SST(0x5D, 0x25, SS_RDEF, /* XXX TBD */
2149 "Controller impending failure access times too high") },
2150 /* D B */
2151 { SST(0x5D, 0x26, SS_RDEF, /* XXX TBD */
2152 "Controller impending failure start unit times too high") },
2153 /* D B */
2154 { SST(0x5D, 0x27, SS_RDEF, /* XXX TBD */
2155 "Controller impending failure channel parametrics") },
2156 /* D B */
2157 { SST(0x5D, 0x28, SS_RDEF, /* XXX TBD */
2158 "Controller impending failure controller detected") },
2159 /* D B */
2160 { SST(0x5D, 0x29, SS_RDEF, /* XXX TBD */
2161 "Controller impending failure throughput performance") },
2162 /* D B */
2163 { SST(0x5D, 0x2A, SS_RDEF, /* XXX TBD */
2164 "Controller impending failure seek time performance") },
2165 /* D B */
2166 { SST(0x5D, 0x2B, SS_RDEF, /* XXX TBD */
2167 "Controller impending failure spin-up retry count") },
2168 /* D B */
2169 { SST(0x5D, 0x2C, SS_RDEF, /* XXX TBD */
2170 "Controller impending failure drive calibration retry count") },
2171 /* D B */
2172 { SST(0x5D, 0x30, SS_RDEF, /* XXX TBD */
2173 "Data channel impending failure general hard drive failure") },
2174 /* D B */
2175 { SST(0x5D, 0x31, SS_RDEF, /* XXX TBD */
2176 "Data channel impending failure drive error rate too high") },
2177 /* D B */
2178 { SST(0x5D, 0x32, SS_RDEF, /* XXX TBD */
2179 "Data channel impending failure data error rate too high") },
2180 /* D B */
2181 { SST(0x5D, 0x33, SS_RDEF, /* XXX TBD */
2182 "Data channel impending failure seek error rate too high") },
2183 /* D B */
2184 { SST(0x5D, 0x34, SS_RDEF, /* XXX TBD */
2185 "Data channel impending failure too many block reassigns") },
2186 /* D B */
2187 { SST(0x5D, 0x35, SS_RDEF, /* XXX TBD */
2188 "Data channel impending failure access times too high") },
2189 /* D B */
2190 { SST(0x5D, 0x36, SS_RDEF, /* XXX TBD */
2191 "Data channel impending failure start unit times too high") },
2192 /* D B */
2193 { SST(0x5D, 0x37, SS_RDEF, /* XXX TBD */
2194 "Data channel impending failure channel parametrics") },
2195 /* D B */
2196 { SST(0x5D, 0x38, SS_RDEF, /* XXX TBD */
2197 "Data channel impending failure controller detected") },
2198 /* D B */
2199 { SST(0x5D, 0x39, SS_RDEF, /* XXX TBD */
2200 "Data channel impending failure throughput performance") },
2201 /* D B */
2202 { SST(0x5D, 0x3A, SS_RDEF, /* XXX TBD */
2203 "Data channel impending failure seek time performance") },
2204 /* D B */
2205 { SST(0x5D, 0x3B, SS_RDEF, /* XXX TBD */
2206 "Data channel impending failure spin-up retry count") },
2207 /* D B */
2208 { SST(0x5D, 0x3C, SS_RDEF, /* XXX TBD */
2209 "Data channel impending failure drive calibration retry count") },
2210 /* D B */
2211 { SST(0x5D, 0x40, SS_RDEF, /* XXX TBD */
2212 "Servo impending failure general hard drive failure") },
2213 /* D B */
2214 { SST(0x5D, 0x41, SS_RDEF, /* XXX TBD */
2215 "Servo impending failure drive error rate too high") },
2216 /* D B */
2217 { SST(0x5D, 0x42, SS_RDEF, /* XXX TBD */
2218 "Servo impending failure data error rate too high") },
2219 /* D B */
2220 { SST(0x5D, 0x43, SS_RDEF, /* XXX TBD */
2221 "Servo impending failure seek error rate too high") },
2222 /* D B */
2223 { SST(0x5D, 0x44, SS_RDEF, /* XXX TBD */
2224 "Servo impending failure too many block reassigns") },
2225 /* D B */
2226 { SST(0x5D, 0x45, SS_RDEF, /* XXX TBD */
2227 "Servo impending failure access times too high") },
2228 /* D B */
2229 { SST(0x5D, 0x46, SS_RDEF, /* XXX TBD */
2230 "Servo impending failure start unit times too high") },
2231 /* D B */
2232 { SST(0x5D, 0x47, SS_RDEF, /* XXX TBD */
2233 "Servo impending failure channel parametrics") },
2234 /* D B */
2235 { SST(0x5D, 0x48, SS_RDEF, /* XXX TBD */
2236 "Servo impending failure controller detected") },
2237 /* D B */
2238 { SST(0x5D, 0x49, SS_RDEF, /* XXX TBD */
2239 "Servo impending failure throughput performance") },
2240 /* D B */
2241 { SST(0x5D, 0x4A, SS_RDEF, /* XXX TBD */
2242 "Servo impending failure seek time performance") },
2243 /* D B */
2244 { SST(0x5D, 0x4B, SS_RDEF, /* XXX TBD */
2245 "Servo impending failure spin-up retry count") },
2246 /* D B */
2247 { SST(0x5D, 0x4C, SS_RDEF, /* XXX TBD */
2248 "Servo impending failure drive calibration retry count") },
2249 /* D B */
2250 { SST(0x5D, 0x50, SS_RDEF, /* XXX TBD */
2251 "Spindle impending failure general hard drive failure") },
2252 /* D B */
2253 { SST(0x5D, 0x51, SS_RDEF, /* XXX TBD */
2254 "Spindle impending failure drive error rate too high") },
2255 /* D B */
2256 { SST(0x5D, 0x52, SS_RDEF, /* XXX TBD */
2257 "Spindle impending failure data error rate too high") },
2258 /* D B */
2259 { SST(0x5D, 0x53, SS_RDEF, /* XXX TBD */
2260 "Spindle impending failure seek error rate too high") },
2261 /* D B */
2262 { SST(0x5D, 0x54, SS_RDEF, /* XXX TBD */
2263 "Spindle impending failure too many block reassigns") },
2264 /* D B */
2265 { SST(0x5D, 0x55, SS_RDEF, /* XXX TBD */
2266 "Spindle impending failure access times too high") },
2267 /* D B */
2268 { SST(0x5D, 0x56, SS_RDEF, /* XXX TBD */
2269 "Spindle impending failure start unit times too high") },
2270 /* D B */
2271 { SST(0x5D, 0x57, SS_RDEF, /* XXX TBD */
2272 "Spindle impending failure channel parametrics") },
2273 /* D B */
2274 { SST(0x5D, 0x58, SS_RDEF, /* XXX TBD */
2275 "Spindle impending failure controller detected") },
2276 /* D B */
2277 { SST(0x5D, 0x59, SS_RDEF, /* XXX TBD */
2278 "Spindle impending failure throughput performance") },
2279 /* D B */
2280 { SST(0x5D, 0x5A, SS_RDEF, /* XXX TBD */
2281 "Spindle impending failure seek time performance") },
2282 /* D B */
2283 { SST(0x5D, 0x5B, SS_RDEF, /* XXX TBD */
2284 "Spindle impending failure spin-up retry count") },
2285 /* D B */
2286 { SST(0x5D, 0x5C, SS_RDEF, /* XXX TBD */
2287 "Spindle impending failure drive calibration retry count") },
2288 /* D B */
2289 { SST(0x5D, 0x60, SS_RDEF, /* XXX TBD */
2290 "Firmware impending failure general hard drive failure") },
2291 /* D B */
2292 { SST(0x5D, 0x61, SS_RDEF, /* XXX TBD */
2293 "Firmware impending failure drive error rate too high") },
2294 /* D B */
2295 { SST(0x5D, 0x62, SS_RDEF, /* XXX TBD */
2296 "Firmware impending failure data error rate too high") },
2297 /* D B */
2298 { SST(0x5D, 0x63, SS_RDEF, /* XXX TBD */
2299 "Firmware impending failure seek error rate too high") },
2300 /* D B */
2301 { SST(0x5D, 0x64, SS_RDEF, /* XXX TBD */
2302 "Firmware impending failure too many block reassigns") },
2303 /* D B */
2304 { SST(0x5D, 0x65, SS_RDEF, /* XXX TBD */
2305 "Firmware impending failure access times too high") },
2306 /* D B */
2307 { SST(0x5D, 0x66, SS_RDEF, /* XXX TBD */
2308 "Firmware impending failure start unit times too high") },
2309 /* D B */
2310 { SST(0x5D, 0x67, SS_RDEF, /* XXX TBD */
2311 "Firmware impending failure channel parametrics") },
2312 /* D B */
2313 { SST(0x5D, 0x68, SS_RDEF, /* XXX TBD */
2314 "Firmware impending failure controller detected") },
2315 /* D B */
2316 { SST(0x5D, 0x69, SS_RDEF, /* XXX TBD */
2317 "Firmware impending failure throughput performance") },
2318 /* D B */
2319 { SST(0x5D, 0x6A, SS_RDEF, /* XXX TBD */
2320 "Firmware impending failure seek time performance") },
2321 /* D B */
2322 { SST(0x5D, 0x6B, SS_RDEF, /* XXX TBD */
2323 "Firmware impending failure spin-up retry count") },
2324 /* D B */
2325 { SST(0x5D, 0x6C, SS_RDEF, /* XXX TBD */
2326 "Firmware impending failure drive calibration retry count") },
2327 /* DTLPWROMAEBKVF */
2328 { SST(0x5D, 0xFF, SS_RDEF,
2329 "Failure prediction threshold exceeded (false)") },
2330 /* DTLPWRO A K */
2331 { SST(0x5E, 0x00, SS_RDEF,
2332 "Low power condition on") },
2333 /* DTLPWRO A K */
2334 { SST(0x5E, 0x01, SS_RDEF,
2335 "Idle condition activated by timer") },
2336 /* DTLPWRO A K */
2337 { SST(0x5E, 0x02, SS_RDEF,
2338 "Standby condition activated by timer") },
2339 /* DTLPWRO A K */
2340 { SST(0x5E, 0x03, SS_RDEF,
2341 "Idle condition activated by command") },
2342 /* DTLPWRO A K */
2343 { SST(0x5E, 0x04, SS_RDEF,
2344 "Standby condition activated by command") },
2345 /* B */
2346 { SST(0x5E, 0x41, SS_RDEF, /* XXX TBD */
2347 "Power state change to active") },
2348 /* B */
2349 { SST(0x5E, 0x42, SS_RDEF, /* XXX TBD */
2350 "Power state change to idle") },
2351 /* B */
2352 { SST(0x5E, 0x43, SS_RDEF, /* XXX TBD */
2353 "Power state change to standby") },
2354 /* B */
2355 { SST(0x5E, 0x45, SS_RDEF, /* XXX TBD */
2356 "Power state change to sleep") },
2357 /* BK */
2358 { SST(0x5E, 0x47, SS_RDEF, /* XXX TBD */
2359 "Power state change to device control") },
2360 /* */
2361 { SST(0x60, 0x00, SS_RDEF,
2362 "Lamp failure") },
2363 /* */
2364 { SST(0x61, 0x00, SS_RDEF,
2365 "Video acquisition error") },
2366 /* */
2367 { SST(0x61, 0x01, SS_RDEF,
2368 "Unable to acquire video") },
2369 /* */
2370 { SST(0x61, 0x02, SS_RDEF,
2371 "Out of focus") },
2372 /* */
2373 { SST(0x62, 0x00, SS_RDEF,
2374 "Scan head positioning error") },
2375 /* R */
2376 { SST(0x63, 0x00, SS_RDEF,
2377 "End of user area encountered on this track") },
2378 /* R */
2379 { SST(0x63, 0x01, SS_FATAL | ENOSPC,
2380 "Packet does not fit in available space") },
2381 /* R */
2382 { SST(0x64, 0x00, SS_FATAL | ENXIO,
2383 "Illegal mode for this track") },
2384 /* R */
2385 { SST(0x64, 0x01, SS_RDEF,
2386 "Invalid packet size") },
2387 /* DTLPWROMAEBKVF */
2388 { SST(0x65, 0x00, SS_RDEF,
2389 "Voltage fault") },
2390 /* */
2391 { SST(0x66, 0x00, SS_RDEF,
2392 "Automatic document feeder cover up") },
2393 /* */
2394 { SST(0x66, 0x01, SS_RDEF,
2395 "Automatic document feeder lift up") },
2396 /* */
2397 { SST(0x66, 0x02, SS_RDEF,
2398 "Document jam in automatic document feeder") },
2399 /* */
2400 { SST(0x66, 0x03, SS_RDEF,
2401 "Document miss feed automatic in document feeder") },
2402 /* A */
2403 { SST(0x67, 0x00, SS_RDEF,
2404 "Configuration failure") },
2405 /* A */
2406 { SST(0x67, 0x01, SS_RDEF,
2407 "Configuration of incapable logical units failed") },
2408 /* A */
2409 { SST(0x67, 0x02, SS_RDEF,
2410 "Add logical unit failed") },
2411 /* A */
2412 { SST(0x67, 0x03, SS_RDEF,
2413 "Modification of logical unit failed") },
2414 /* A */
2415 { SST(0x67, 0x04, SS_RDEF,
2416 "Exchange of logical unit failed") },
2417 /* A */
2418 { SST(0x67, 0x05, SS_RDEF,
2419 "Remove of logical unit failed") },
2420 /* A */
2421 { SST(0x67, 0x06, SS_RDEF,
2422 "Attachment of logical unit failed") },
2423 /* A */
2424 { SST(0x67, 0x07, SS_RDEF,
2425 "Creation of logical unit failed") },
2426 /* A */
2427 { SST(0x67, 0x08, SS_RDEF, /* XXX TBD */
2428 "Assign failure occurred") },
2429 /* A */
2430 { SST(0x67, 0x09, SS_RDEF, /* XXX TBD */
2431 "Multiply assigned logical unit") },
2432 /* DTLPWROMAEBKVF */
2433 { SST(0x67, 0x0A, SS_RDEF, /* XXX TBD */
2434 "Set target port groups command failed") },
2435 /* DT B */
2436 { SST(0x67, 0x0B, SS_RDEF, /* XXX TBD */
2437 "ATA device feature not enabled") },
2438 /* A */
2439 { SST(0x68, 0x00, SS_RDEF,
2440 "Logical unit not configured") },
2441 /* A */
2442 { SST(0x69, 0x00, SS_RDEF,
2443 "Data loss on logical unit") },
2444 /* A */
2445 { SST(0x69, 0x01, SS_RDEF,
2446 "Multiple logical unit failures") },
2447 /* A */
2448 { SST(0x69, 0x02, SS_RDEF,
2449 "Parity/data mismatch") },
2450 /* A */
2451 { SST(0x6A, 0x00, SS_RDEF,
2452 "Informational, refer to log") },
2453 /* A */
2454 { SST(0x6B, 0x00, SS_RDEF,
2455 "State change has occurred") },
2456 /* A */
2457 { SST(0x6B, 0x01, SS_RDEF,
2458 "Redundancy level got better") },
2459 /* A */
2460 { SST(0x6B, 0x02, SS_RDEF,
2461 "Redundancy level got worse") },
2462 /* A */
2463 { SST(0x6C, 0x00, SS_RDEF,
2464 "Rebuild failure occurred") },
2465 /* A */
2466 { SST(0x6D, 0x00, SS_RDEF,
2467 "Recalculate failure occurred") },
2468 /* A */
2469 { SST(0x6E, 0x00, SS_RDEF,
2470 "Command to logical unit failed") },
2471 /* R */
2472 { SST(0x6F, 0x00, SS_RDEF, /* XXX TBD */
2473 "Copy protection key exchange failure - authentication failure") },
2474 /* R */
2475 { SST(0x6F, 0x01, SS_RDEF, /* XXX TBD */
2476 "Copy protection key exchange failure - key not present") },
2477 /* R */
2478 { SST(0x6F, 0x02, SS_RDEF, /* XXX TBD */
2479 "Copy protection key exchange failure - key not established") },
2480 /* R */
2481 { SST(0x6F, 0x03, SS_RDEF, /* XXX TBD */
2482 "Read of scrambled sector without authentication") },
2483 /* R */
2484 { SST(0x6F, 0x04, SS_RDEF, /* XXX TBD */
2485 "Media region code is mismatched to logical unit region") },
2486 /* R */
2487 { SST(0x6F, 0x05, SS_RDEF, /* XXX TBD */
2488 "Drive region must be permanent/region reset count error") },
2489 /* R */
2490 { SST(0x6F, 0x06, SS_RDEF, /* XXX TBD */
2491 "Insufficient block count for binding NONCE recording") },
2492 /* R */
2493 { SST(0x6F, 0x07, SS_RDEF, /* XXX TBD */
2494 "Conflict in binding NONCE recording") },
2495 /* T */
2496 { SST(0x70, 0x00, SS_RDEF,
2497 "Decompression exception short: ASCQ = Algorithm ID") },
2498 /* T */
2499 { SST(0x70, 0xFF, SS_RDEF | SSQ_RANGE,
2500 NULL) }, /* Range 0x00 -> 0xFF */
2501 /* T */
2502 { SST(0x71, 0x00, SS_RDEF,
2503 "Decompression exception long: ASCQ = Algorithm ID") },
2504 /* T */
2505 { SST(0x71, 0xFF, SS_RDEF | SSQ_RANGE,
2506 NULL) }, /* Range 0x00 -> 0xFF */
2507 /* R */
2508 { SST(0x72, 0x00, SS_RDEF,
2509 "Session fixation error") },
2510 /* R */
2511 { SST(0x72, 0x01, SS_RDEF,
2512 "Session fixation error writing lead-in") },
2513 /* R */
2514 { SST(0x72, 0x02, SS_RDEF,
2515 "Session fixation error writing lead-out") },
2516 /* R */
2517 { SST(0x72, 0x03, SS_RDEF,
2518 "Session fixation error - incomplete track in session") },
2519 /* R */
2520 { SST(0x72, 0x04, SS_RDEF,
2521 "Empty or partially written reserved track") },
2522 /* R */
2523 { SST(0x72, 0x05, SS_RDEF, /* XXX TBD */
2524 "No more track reservations allowed") },
2525 /* R */
2526 { SST(0x72, 0x06, SS_RDEF, /* XXX TBD */
2527 "RMZ extension is not allowed") },
2528 /* R */
2529 { SST(0x72, 0x07, SS_RDEF, /* XXX TBD */
2530 "No more test zone extensions are allowed") },
2531 /* R */
2532 { SST(0x73, 0x00, SS_RDEF,
2533 "CD control error") },
2534 /* R */
2535 { SST(0x73, 0x01, SS_RDEF,
2536 "Power calibration area almost full") },
2537 /* R */
2538 { SST(0x73, 0x02, SS_FATAL | ENOSPC,
2539 "Power calibration area is full") },
2540 /* R */
2541 { SST(0x73, 0x03, SS_RDEF,
2542 "Power calibration area error") },
2543 /* R */
2544 { SST(0x73, 0x04, SS_RDEF,
2545 "Program memory area update failure") },
2546 /* R */
2547 { SST(0x73, 0x05, SS_RDEF,
2548 "Program memory area is full") },
2549 /* R */
2550 { SST(0x73, 0x06, SS_RDEF, /* XXX TBD */
2551 "RMA/PMA is almost full") },
2552 /* R */
2553 { SST(0x73, 0x10, SS_RDEF, /* XXX TBD */
2554 "Current power calibration area almost full") },
2555 /* R */
2556 { SST(0x73, 0x11, SS_RDEF, /* XXX TBD */
2557 "Current power calibration area is full") },
2558 /* R */
2559 { SST(0x73, 0x17, SS_RDEF, /* XXX TBD */
2560 "RDZ is full") },
2561 /* T */
2562 { SST(0x74, 0x00, SS_RDEF, /* XXX TBD */
2563 "Security error") },
2564 /* T */
2565 { SST(0x74, 0x01, SS_RDEF, /* XXX TBD */
2566 "Unable to decrypt data") },
2567 /* T */
2568 { SST(0x74, 0x02, SS_RDEF, /* XXX TBD */
2569 "Unencrypted data encountered while decrypting") },
2570 /* T */
2571 { SST(0x74, 0x03, SS_RDEF, /* XXX TBD */
2572 "Incorrect data encryption key") },
2573 /* T */
2574 { SST(0x74, 0x04, SS_RDEF, /* XXX TBD */
2575 "Cryptographic integrity validation failed") },
2576 /* T */
2577 { SST(0x74, 0x05, SS_RDEF, /* XXX TBD */
2578 "Error decrypting data") },
2579 /* T */
2580 { SST(0x74, 0x06, SS_RDEF, /* XXX TBD */
2581 "Unknown signature verification key") },
2582 /* T */
2583 { SST(0x74, 0x07, SS_RDEF, /* XXX TBD */
2584 "Encryption parameters not usable") },
2585 /* DT R M E VF */
2586 { SST(0x74, 0x08, SS_RDEF, /* XXX TBD */
2587 "Digital signature validation failure") },
2588 /* T */
2589 { SST(0x74, 0x09, SS_RDEF, /* XXX TBD */
2590 "Encryption mode mismatch on read") },
2591 /* T */
2592 { SST(0x74, 0x0A, SS_RDEF, /* XXX TBD */
2593 "Encrypted block not raw read enabled") },
2594 /* T */
2595 { SST(0x74, 0x0B, SS_RDEF, /* XXX TBD */
2596 "Incorrect encryption parameters") },
2597 /* DT R MAEBKV */
2598 { SST(0x74, 0x0C, SS_RDEF, /* XXX TBD */
2599 "Unable to decrypt parameter list") },
2600 /* T */
2601 { SST(0x74, 0x0D, SS_RDEF, /* XXX TBD */
2602 "Encryption algorithm disabled") },
2603 /* DT R MAEBKV */
2604 { SST(0x74, 0x10, SS_RDEF, /* XXX TBD */
2605 "SA creation parameter value invalid") },
2606 /* DT R MAEBKV */
2607 { SST(0x74, 0x11, SS_RDEF, /* XXX TBD */
2608 "SA creation parameter value rejected") },
2609 /* DT R MAEBKV */
2610 { SST(0x74, 0x12, SS_RDEF, /* XXX TBD */
2611 "Invalid SA usage") },
2612 /* T */
2613 { SST(0x74, 0x21, SS_RDEF, /* XXX TBD */
2614 "Data encryption configuration prevented") },
2615 /* DT R MAEBKV */
2616 { SST(0x74, 0x30, SS_RDEF, /* XXX TBD */
2617 "SA creation parameter not supported") },
2618 /* DT R MAEBKV */
2619 { SST(0x74, 0x40, SS_RDEF, /* XXX TBD */
2620 "Authentication failed") },
2621 /* V */
2622 { SST(0x74, 0x61, SS_RDEF, /* XXX TBD */
2623 "External data encryption key manager access error") },
2624 /* V */
2625 { SST(0x74, 0x62, SS_RDEF, /* XXX TBD */
2626 "External data encryption key manager error") },
2627 /* V */
2628 { SST(0x74, 0x63, SS_RDEF, /* XXX TBD */
2629 "External data encryption key not found") },
2630 /* V */
2631 { SST(0x74, 0x64, SS_RDEF, /* XXX TBD */
2632 "External data encryption request not authorized") },
2633 /* T */
2634 { SST(0x74, 0x6E, SS_RDEF, /* XXX TBD */
2635 "External data encryption control timeout") },
2636 /* T */
2637 { SST(0x74, 0x6F, SS_RDEF, /* XXX TBD */
2638 "External data encryption control error") },
2639 /* DT R M E V */
2640 { SST(0x74, 0x71, SS_RDEF, /* XXX TBD */
2641 "Logical unit access not authorized") },
2642 /* D */
2643 { SST(0x74, 0x79, SS_RDEF, /* XXX TBD */
2644 "Security conflict in translated device") }
2645 };
2646
2647 const int asc_table_size = NELEM(asc_table);
2648
2649 struct asc_key
2650 {
2651 int asc;
2652 int ascq;
2653 };
2654
2655 static int
ascentrycomp(const void * key,const void * member)2656 ascentrycomp(const void *key, const void *member)
2657 {
2658 int asc;
2659 int ascq;
2660 const struct asc_table_entry *table_entry;
2661
2662 asc = ((const struct asc_key *)key)->asc;
2663 ascq = ((const struct asc_key *)key)->ascq;
2664 table_entry = (const struct asc_table_entry *)member;
2665
2666 if (asc >= table_entry->asc) {
2667
2668 if (asc > table_entry->asc)
2669 return (1);
2670
2671 if (ascq <= table_entry->ascq) {
2672 /* Check for ranges */
2673 if (ascq == table_entry->ascq
2674 || ((table_entry->action & SSQ_RANGE) != 0
2675 && ascq >= (table_entry - 1)->ascq))
2676 return (0);
2677 return (-1);
2678 }
2679 return (1);
2680 }
2681 return (-1);
2682 }
2683
2684 static int
senseentrycomp(const void * key,const void * member)2685 senseentrycomp(const void *key, const void *member)
2686 {
2687 int sense_key;
2688 const struct sense_key_table_entry *table_entry;
2689
2690 sense_key = *((const int *)key);
2691 table_entry = (const struct sense_key_table_entry *)member;
2692
2693 if (sense_key >= table_entry->sense_key) {
2694 if (sense_key == table_entry->sense_key)
2695 return (0);
2696 return (1);
2697 }
2698 return (-1);
2699 }
2700
2701 static void
fetchtableentries(int sense_key,int asc,int ascq,struct scsi_inquiry_data * inq_data,const struct sense_key_table_entry ** sense_entry,const struct asc_table_entry ** asc_entry)2702 fetchtableentries(int sense_key, int asc, int ascq,
2703 struct scsi_inquiry_data *inq_data,
2704 const struct sense_key_table_entry **sense_entry,
2705 const struct asc_table_entry **asc_entry)
2706 {
2707 caddr_t match;
2708 const struct asc_table_entry *asc_tables[2];
2709 const struct sense_key_table_entry *sense_tables[2];
2710 struct asc_key asc_ascq;
2711 size_t asc_tables_size[2];
2712 size_t sense_tables_size[2];
2713 int num_asc_tables;
2714 int num_sense_tables;
2715 int i;
2716
2717 /* Default to failure */
2718 *sense_entry = NULL;
2719 *asc_entry = NULL;
2720 match = NULL;
2721 if (inq_data != NULL)
2722 match = cam_quirkmatch((caddr_t)inq_data,
2723 (caddr_t)sense_quirk_table,
2724 sense_quirk_table_size,
2725 sizeof(*sense_quirk_table),
2726 scsi_inquiry_match);
2727
2728 if (match != NULL) {
2729 struct scsi_sense_quirk_entry *quirk;
2730
2731 quirk = (struct scsi_sense_quirk_entry *)match;
2732 asc_tables[0] = quirk->asc_info;
2733 asc_tables_size[0] = quirk->num_ascs;
2734 asc_tables[1] = asc_table;
2735 asc_tables_size[1] = asc_table_size;
2736 num_asc_tables = 2;
2737 sense_tables[0] = quirk->sense_key_info;
2738 sense_tables_size[0] = quirk->num_sense_keys;
2739 sense_tables[1] = sense_key_table;
2740 sense_tables_size[1] = sense_key_table_size;
2741 num_sense_tables = 2;
2742 } else {
2743 asc_tables[0] = asc_table;
2744 asc_tables_size[0] = asc_table_size;
2745 num_asc_tables = 1;
2746 sense_tables[0] = sense_key_table;
2747 sense_tables_size[0] = sense_key_table_size;
2748 num_sense_tables = 1;
2749 }
2750
2751 asc_ascq.asc = asc;
2752 asc_ascq.ascq = ascq;
2753 for (i = 0; i < num_asc_tables; i++) {
2754 void *found_entry;
2755
2756 found_entry = kbsearch(&asc_ascq, asc_tables[i],
2757 asc_tables_size[i],
2758 sizeof(**asc_tables),
2759 ascentrycomp);
2760
2761 if (found_entry) {
2762 *asc_entry = (struct asc_table_entry *)found_entry;
2763 break;
2764 }
2765 }
2766
2767 for (i = 0; i < num_sense_tables; i++) {
2768 void *found_entry;
2769
2770 found_entry = kbsearch(&sense_key, sense_tables[i],
2771 sense_tables_size[i],
2772 sizeof(**sense_tables),
2773 senseentrycomp);
2774
2775 if (found_entry) {
2776 *sense_entry =
2777 (struct sense_key_table_entry *)found_entry;
2778 break;
2779 }
2780 }
2781 }
2782
2783 void
scsi_sense_desc(int sense_key,int asc,int ascq,struct scsi_inquiry_data * inq_data,const char ** sense_key_desc,const char ** asc_desc)2784 scsi_sense_desc(int sense_key, int asc, int ascq,
2785 struct scsi_inquiry_data *inq_data,
2786 const char **sense_key_desc, const char **asc_desc)
2787 {
2788 const struct asc_table_entry *asc_entry;
2789 const struct sense_key_table_entry *sense_entry;
2790
2791 fetchtableentries(sense_key, asc, ascq,
2792 inq_data,
2793 &sense_entry,
2794 &asc_entry);
2795
2796 *sense_key_desc = sense_entry->desc;
2797
2798 if (asc_entry != NULL)
2799 *asc_desc = asc_entry->desc;
2800 else if (asc >= 0x80 && asc <= 0xff)
2801 *asc_desc = "Vendor Specific ASC";
2802 else if (ascq >= 0x80 && ascq <= 0xff)
2803 *asc_desc = "Vendor Specific ASCQ";
2804 else
2805 *asc_desc = "Reserved ASC/ASCQ pair";
2806 }
2807
2808 /*
2809 * Given sense and device type information, return the appropriate action.
2810 * If we do not understand the specific error as identified by the ASC/ASCQ
2811 * pair, fall back on the more generic actions derived from the sense key.
2812 */
2813 scsi_sense_action
scsi_error_action(struct ccb_scsiio * csio,struct scsi_inquiry_data * inq_data,u_int32_t sense_flags)2814 scsi_error_action(struct ccb_scsiio *csio, struct scsi_inquiry_data *inq_data,
2815 u_int32_t sense_flags)
2816 {
2817 const struct asc_table_entry *asc_entry;
2818 const struct sense_key_table_entry *sense_entry;
2819 int error_code, sense_key, asc, ascq;
2820 scsi_sense_action action;
2821
2822 scsi_extract_sense(&csio->sense_data, &error_code,
2823 &sense_key, &asc, &ascq);
2824
2825 if (error_code == SSD_DEFERRED_ERROR) {
2826 /*
2827 * XXX dufault@FreeBSD.org
2828 * This error doesn't relate to the command associated
2829 * with this request sense. A deferred error is an error
2830 * for a command that has already returned GOOD status
2831 * (see SCSI2 8.2.14.2).
2832 *
2833 * By my reading of that section, it looks like the current
2834 * command has been cancelled, we should now clean things up
2835 * (hopefully recovering any lost data) and then retry the
2836 * current command. There are two easy choices, both wrong:
2837 *
2838 * 1. Drop through (like we had been doing), thus treating
2839 * this as if the error were for the current command and
2840 * return and stop the current command.
2841 *
2842 * 2. Issue a retry (like I made it do) thus hopefully
2843 * recovering the current transfer, and ignoring the
2844 * fact that we've dropped a command.
2845 *
2846 * These should probably be handled in a device specific
2847 * sense handler or punted back up to a user mode daemon
2848 */
2849 action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE;
2850 } else {
2851 fetchtableentries(sense_key, asc, ascq,
2852 inq_data,
2853 &sense_entry,
2854 &asc_entry);
2855
2856 /*
2857 * Override the 'No additional Sense' entry (0,0)
2858 * with the error action of the sense key.
2859 */
2860 if (asc_entry != NULL
2861 && (asc != 0 || ascq != 0))
2862 action = asc_entry->action;
2863 else
2864 action = sense_entry->action;
2865
2866 if (sense_key == SSD_KEY_RECOVERED_ERROR) {
2867 /*
2868 * The action succeeded but the device wants
2869 * the user to know that some recovery action
2870 * was required.
2871 */
2872 action &= ~(SS_MASK|SSQ_MASK|SS_ERRMASK);
2873 action |= SS_NOP|SSQ_PRINT_SENSE;
2874 } else if (sense_key == SSD_KEY_ILLEGAL_REQUEST) {
2875 if ((sense_flags & SF_QUIET_IR) != 0)
2876 action &= ~SSQ_PRINT_SENSE;
2877 } else if (sense_key == SSD_KEY_UNIT_ATTENTION) {
2878 if ((sense_flags & SF_RETRY_UA) != 0
2879 && (action & SS_MASK) == SS_FAIL) {
2880 action &= ~(SS_MASK|SSQ_MASK);
2881 action |= SS_RETRY|SSQ_DECREMENT_COUNT|
2882 SSQ_PRINT_SENSE;
2883 }
2884 }
2885 }
2886 #if 0 /* XXX KERNEL */
2887 if (bootverbose)
2888 sense_flags |= SF_PRINT_ALWAYS;
2889 #endif
2890 if ((sense_flags & SF_PRINT_ALWAYS) != 0)
2891 action |= SSQ_PRINT_SENSE;
2892 else if ((sense_flags & SF_NO_PRINT) != 0)
2893 action &= ~SSQ_PRINT_SENSE;
2894
2895 return (action);
2896 }
2897
2898 char *
scsi_cdb_string(u_int8_t * cdb_ptr,char * cdb_string,size_t len)2899 scsi_cdb_string(u_int8_t *cdb_ptr, char *cdb_string, size_t len)
2900 {
2901 u_int8_t cdb_len;
2902 int i;
2903
2904 if (cdb_ptr == NULL)
2905 return("");
2906
2907 /* Silence warnings */
2908 cdb_len = 0;
2909
2910 /*
2911 * This is taken from the SCSI-3 draft spec.
2912 * (T10/1157D revision 0.3)
2913 * The top 3 bits of an opcode are the group code. The next 5 bits
2914 * are the command code.
2915 * Group 0: six byte commands
2916 * Group 1: ten byte commands
2917 * Group 2: ten byte commands
2918 * Group 3: reserved
2919 * Group 4: sixteen byte commands
2920 * Group 5: twelve byte commands
2921 * Group 6: vendor specific
2922 * Group 7: vendor specific
2923 */
2924 switch((*cdb_ptr >> 5) & 0x7) {
2925 case 0:
2926 cdb_len = 6;
2927 break;
2928 case 1:
2929 case 2:
2930 cdb_len = 10;
2931 break;
2932 case 3:
2933 case 6:
2934 case 7:
2935 /* in this case, just print out the opcode */
2936 cdb_len = 1;
2937 break;
2938 case 4:
2939 cdb_len = 16;
2940 break;
2941 case 5:
2942 cdb_len = 12;
2943 break;
2944 }
2945 *cdb_string = '\0';
2946 for (i = 0; i < cdb_len; i++)
2947 ksnprintf(cdb_string + strlen(cdb_string),
2948 len - strlen(cdb_string), "%x ", cdb_ptr[i]);
2949
2950 return(cdb_string);
2951 }
2952
2953 const char *
scsi_status_string(struct ccb_scsiio * csio)2954 scsi_status_string(struct ccb_scsiio *csio)
2955 {
2956 switch(csio->scsi_status) {
2957 case SCSI_STATUS_OK:
2958 return("OK");
2959 case SCSI_STATUS_CHECK_COND:
2960 return("Check Condition");
2961 case SCSI_STATUS_BUSY:
2962 return("Busy");
2963 case SCSI_STATUS_INTERMED:
2964 return("Intermediate");
2965 case SCSI_STATUS_INTERMED_COND_MET:
2966 return("Intermediate-Condition Met");
2967 case SCSI_STATUS_RESERV_CONFLICT:
2968 return("Reservation Conflict");
2969 case SCSI_STATUS_CMD_TERMINATED:
2970 return("Command Terminated");
2971 case SCSI_STATUS_QUEUE_FULL:
2972 return("Queue Full");
2973 case SCSI_STATUS_ACA_ACTIVE:
2974 return("ACA Active");
2975 case SCSI_STATUS_TASK_ABORTED:
2976 return("Task Aborted");
2977 default: {
2978 static char unkstr[64];
2979 ksnprintf(unkstr, sizeof(unkstr), "Unknown %#x",
2980 csio->scsi_status);
2981 return(unkstr);
2982 }
2983 }
2984 }
2985
2986 /*
2987 * scsi_command_string() returns 0 for success and -1 for failure.
2988 */
2989 #ifdef _KERNEL
2990 int
scsi_command_string(struct ccb_scsiio * csio,struct sbuf * sb)2991 scsi_command_string(struct ccb_scsiio *csio, struct sbuf *sb)
2992 #else
2993 int
2994 scsi_command_string(struct cam_device *device, struct ccb_scsiio *csio,
2995 struct sbuf *sb)
2996 #endif
2997 {
2998 struct scsi_inquiry_data *inq_data;
2999 char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1];
3000 #ifdef _KERNEL
3001 struct ccb_getdev *cgd;
3002 struct scsi_inquiry_data copy_data;
3003 #endif
3004
3005 #ifdef _KERNEL
3006 /*
3007 * Get the device information.
3008 */
3009 cgd = &xpt_alloc_ccb()->cgd;
3010 xpt_setup_ccb(&cgd->ccb_h,
3011 csio->ccb_h.path,
3012 /*priority*/ 1);
3013 cgd->ccb_h.func_code = XPT_GDEV_TYPE;
3014 xpt_action((union ccb *)cgd);
3015
3016 /*
3017 * If the device is unconfigured, just pretend that it is a hard
3018 * drive. scsi_op_desc() needs this.
3019 */
3020 if (cgd->ccb_h.status == CAM_DEV_NOT_THERE)
3021 cgd->inq_data.device = T_DIRECT;
3022
3023 copy_data = cgd->inq_data;
3024 inq_data = ©_data;
3025 xpt_free_ccb(&cgd->ccb_h);
3026
3027 #else /* !_KERNEL */
3028
3029 inq_data = &device->inq_data;
3030
3031 #endif /* _KERNEL/!_KERNEL */
3032
3033 if ((csio->ccb_h.flags & CAM_CDB_POINTER) != 0) {
3034 sbuf_printf(sb, "%s. CDB: %s",
3035 scsi_op_desc(csio->cdb_io.cdb_ptr[0], inq_data),
3036 scsi_cdb_string(csio->cdb_io.cdb_ptr, cdb_str,
3037 sizeof(cdb_str)));
3038 } else {
3039 sbuf_printf(sb, "%s. CDB: %s",
3040 scsi_op_desc(csio->cdb_io.cdb_bytes[0], inq_data),
3041 scsi_cdb_string(csio->cdb_io.cdb_bytes, cdb_str,
3042 sizeof(cdb_str)));
3043 }
3044
3045 return(0);
3046 }
3047
3048 /*
3049 * scsi_sense_sbuf() returns 0 for success and -1 for failure.
3050 */
3051 #ifdef _KERNEL
3052 int
scsi_sense_sbuf(struct ccb_scsiio * csio,struct sbuf * sb,scsi_sense_string_flags flags)3053 scsi_sense_sbuf(struct ccb_scsiio *csio, struct sbuf *sb,
3054 scsi_sense_string_flags flags)
3055 #else /* !_KERNEL */
3056 int
3057 scsi_sense_sbuf(struct cam_device *device, struct ccb_scsiio *csio,
3058 struct sbuf *sb, scsi_sense_string_flags flags)
3059 #endif /* _KERNEL/!_KERNEL */
3060 {
3061 struct scsi_sense_data *sense;
3062 struct scsi_inquiry_data *inq_data;
3063 #ifdef _KERNEL
3064 struct ccb_getdev *cgd;
3065 struct scsi_inquiry_data copy_data;
3066 #endif /* _KERNEL */
3067 u_int32_t info;
3068 int error_code;
3069 int sense_key;
3070 int asc, ascq;
3071 char path_str[64];
3072
3073 #ifndef _KERNEL
3074 if (device == NULL)
3075 return(-1);
3076 #endif /* !_KERNEL */
3077 if ((csio == NULL) || (sb == NULL))
3078 return(-1);
3079
3080 /*
3081 * If the CDB is a physical address, we can't deal with it..
3082 */
3083 if ((csio->ccb_h.flags & CAM_CDB_PHYS) != 0)
3084 flags &= ~SSS_FLAG_PRINT_COMMAND;
3085
3086 #ifdef _KERNEL
3087 xpt_path_string(csio->ccb_h.path, path_str, sizeof(path_str));
3088 #else /* !_KERNEL */
3089 cam_path_string(device, path_str, sizeof(path_str));
3090 #endif /* _KERNEL/!_KERNEL */
3091
3092 #ifdef _KERNEL
3093 /*
3094 * Get the device information.
3095 */
3096 cgd = &xpt_alloc_ccb()->cgd;
3097 xpt_setup_ccb(&cgd->ccb_h, csio->ccb_h.path, /*priority*/ 1);
3098 cgd->ccb_h.func_code = XPT_GDEV_TYPE;
3099 xpt_action((union ccb *)cgd);
3100
3101 /*
3102 * If the device is unconfigured, just pretend that it is a hard
3103 * drive. scsi_op_desc() needs this.
3104 */
3105 if (cgd->ccb_h.status == CAM_DEV_NOT_THERE)
3106 cgd->inq_data.device = T_DIRECT;
3107
3108 copy_data = cgd->inq_data;
3109 inq_data = ©_data;
3110 xpt_free_ccb(&cgd->ccb_h);
3111
3112 #else /* !_KERNEL */
3113
3114 inq_data = &device->inq_data;
3115
3116 #endif /* _KERNEL/!_KERNEL */
3117
3118 sense = NULL;
3119
3120 if (flags & SSS_FLAG_PRINT_COMMAND) {
3121
3122 sbuf_cat(sb, path_str);
3123
3124 #ifdef _KERNEL
3125 scsi_command_string(csio, sb);
3126 #else /* !_KERNEL */
3127 scsi_command_string(device, csio, sb);
3128 #endif /* _KERNEL/!_KERNEL */
3129 }
3130
3131 /*
3132 * If the sense data is a physical pointer, forget it.
3133 */
3134 if (csio->ccb_h.flags & CAM_SENSE_PTR) {
3135 if (csio->ccb_h.flags & CAM_SENSE_PHYS)
3136 return(-1);
3137 else {
3138 /*
3139 * bcopy the pointer to avoid unaligned access
3140 * errors on finicky architectures. We don't
3141 * ensure that the sense data is pointer aligned.
3142 */
3143 bcopy(&csio->sense_data, &sense,
3144 sizeof(struct scsi_sense_data *));
3145 }
3146 } else {
3147 /*
3148 * If the physical sense flag is set, but the sense pointer
3149 * is not also set, we assume that the user is an idiot and
3150 * return. (Well, okay, it could be that somehow, the
3151 * entire csio is physical, but we would have probably core
3152 * dumped on one of the bogus pointer deferences above
3153 * already.)
3154 */
3155 if (csio->ccb_h.flags & CAM_SENSE_PHYS)
3156 return(-1);
3157 else
3158 sense = &csio->sense_data;
3159 }
3160
3161
3162 sbuf_cat(sb, path_str);
3163
3164 error_code = sense->error_code & SSD_ERRCODE;
3165 sense_key = sense->flags & SSD_KEY;
3166
3167 switch (error_code) {
3168 case SSD_DEFERRED_ERROR:
3169 sbuf_printf(sb, "Deferred Error: ");
3170
3171 /* FALLTHROUGH */
3172 case SSD_CURRENT_ERROR:
3173 {
3174 const char *sense_key_desc;
3175 const char *asc_desc;
3176
3177 asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0;
3178 ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0;
3179 scsi_sense_desc(sense_key, asc, ascq, inq_data,
3180 &sense_key_desc, &asc_desc);
3181 sbuf_cat(sb, sense_key_desc);
3182
3183 info = scsi_4btoul(sense->info);
3184
3185 if (sense->error_code & SSD_ERRCODE_VALID) {
3186
3187 switch (sense_key) {
3188 case SSD_KEY_NOT_READY:
3189 case SSD_KEY_ILLEGAL_REQUEST:
3190 case SSD_KEY_UNIT_ATTENTION:
3191 case SSD_KEY_DATA_PROTECT:
3192 break;
3193 case SSD_KEY_BLANK_CHECK:
3194 sbuf_printf(sb, " req sz: %d (decimal)", info);
3195 break;
3196 default:
3197 if (info) {
3198 if (sense->flags & SSD_ILI) {
3199 sbuf_printf(sb, " ILI (length "
3200 "mismatch): %d", info);
3201
3202 } else {
3203 sbuf_printf(sb, " info:%x",
3204 info);
3205 }
3206 }
3207 }
3208 } else if (info) {
3209 sbuf_printf(sb, " info?:%x", info);
3210 }
3211
3212 if (sense->extra_len >= 4) {
3213 if (bcmp(sense->cmd_spec_info, "\0\0\0\0", 4)) {
3214 sbuf_printf(sb, " csi:%x,%x,%x,%x",
3215 sense->cmd_spec_info[0],
3216 sense->cmd_spec_info[1],
3217 sense->cmd_spec_info[2],
3218 sense->cmd_spec_info[3]);
3219 }
3220 }
3221
3222 sbuf_printf(sb, " asc:%x,%x\n%s%s", asc, ascq,
3223 path_str, asc_desc);
3224
3225 if (sense->extra_len >= 7 && sense->fru) {
3226 sbuf_printf(sb, " field replaceable unit: %x",
3227 sense->fru);
3228 }
3229
3230 if ((sense->extra_len >= 10)
3231 && (sense->sense_key_spec[0] & SSD_SCS_VALID) != 0) {
3232 switch(sense_key) {
3233 case SSD_KEY_ILLEGAL_REQUEST: {
3234 int bad_command;
3235 char tmpstr2[40];
3236
3237 if (sense->sense_key_spec[0] & 0x40)
3238 bad_command = 1;
3239 else
3240 bad_command = 0;
3241
3242 tmpstr2[0] = '\0';
3243
3244 /* Bit pointer is valid */
3245 if (sense->sense_key_spec[0] & 0x08)
3246 ksnprintf(tmpstr2, sizeof(tmpstr2),
3247 "bit %d",
3248 sense->sense_key_spec[0] & 0x7);
3249 sbuf_printf(sb, ": %s byte %d %s is invalid",
3250 bad_command ? "Command" : "Data",
3251 scsi_2btoul(&sense->sense_key_spec[1]),
3252 tmpstr2);
3253 break;
3254 }
3255 case SSD_KEY_RECOVERED_ERROR:
3256 case SSD_KEY_HARDWARE_ERROR:
3257 case SSD_KEY_MEDIUM_ERROR:
3258 sbuf_printf(sb, " actual retry count: %d",
3259 scsi_2btoul(
3260 &sense->sense_key_spec[1]));
3261 break;
3262 default:
3263 sbuf_printf(sb, " sks:%#x,%#x",
3264 sense->sense_key_spec[0],
3265 scsi_2btoul(
3266 &sense->sense_key_spec[1]));
3267 break;
3268 }
3269 }
3270 break;
3271
3272 }
3273 default:
3274 sbuf_printf(sb, "Sense Error Code 0x%x", sense->error_code);
3275 if (sense->error_code & SSD_ERRCODE_VALID) {
3276 sbuf_printf(sb, " at block no. %d (decimal)",
3277 info = scsi_4btoul(sense->info));
3278 }
3279 }
3280
3281 sbuf_printf(sb, "\n");
3282
3283 return(0);
3284 }
3285
3286 #ifdef _KERNEL
3287 char *
scsi_sense_string(struct ccb_scsiio * csio,char * str,int str_len)3288 scsi_sense_string(struct ccb_scsiio *csio, char *str, int str_len)
3289 #else /* !_KERNEL */
3290 char *
3291 scsi_sense_string(struct cam_device *device, struct ccb_scsiio *csio,
3292 char *str, int str_len)
3293 #endif /* _KERNEL/!_KERNEL */
3294 {
3295 struct sbuf sb;
3296
3297 sbuf_new(&sb, str, str_len, 0);
3298
3299 #ifdef _KERNEL
3300 scsi_sense_sbuf(csio, &sb, SSS_FLAG_PRINT_COMMAND);
3301 #else /* !_KERNEL */
3302 scsi_sense_sbuf(device, csio, &sb, SSS_FLAG_PRINT_COMMAND);
3303 #endif /* _KERNEL/!_KERNEL */
3304
3305 sbuf_finish(&sb);
3306
3307 return(sbuf_data(&sb));
3308 }
3309
3310 #ifdef _KERNEL
3311 void
scsi_sense_print(struct ccb_scsiio * csio)3312 scsi_sense_print(struct ccb_scsiio *csio)
3313 {
3314 struct sbuf sb;
3315 char str[512];
3316
3317 sbuf_new(&sb, str, sizeof(str), 0);
3318
3319 scsi_sense_sbuf(csio, &sb, SSS_FLAG_PRINT_COMMAND);
3320
3321 sbuf_finish(&sb);
3322
3323 kprintf("%s", sbuf_data(&sb));
3324 }
3325
3326 #else /* !_KERNEL */
3327 void
scsi_sense_print(struct cam_device * device,struct ccb_scsiio * csio,FILE * ofile)3328 scsi_sense_print(struct cam_device *device, struct ccb_scsiio *csio,
3329 FILE *ofile)
3330 {
3331 struct sbuf sb;
3332 char str[512];
3333
3334 if ((device == NULL) || (csio == NULL) || (ofile == NULL))
3335 return;
3336
3337 sbuf_new(&sb, str, sizeof(str), 0);
3338
3339 scsi_sense_sbuf(device, csio, &sb, SSS_FLAG_PRINT_COMMAND);
3340
3341 sbuf_finish(&sb);
3342
3343 fprintf(ofile, "%s", sbuf_data(&sb));
3344 }
3345
3346 #endif /* _KERNEL/!_KERNEL */
3347
3348 /*
3349 * This function currently requires at least 36 bytes, or
3350 * SHORT_INQUIRY_LENGTH, worth of data to function properly. If this
3351 * function needs more or less data in the future, another length should be
3352 * defined in scsi_all.h to indicate the minimum amount of data necessary
3353 * for this routine to function properly.
3354 */
3355 void
scsi_print_inquiry(struct scsi_inquiry_data * inq_data)3356 scsi_print_inquiry(struct scsi_inquiry_data *inq_data)
3357 {
3358 u_int8_t type;
3359 char *dtype, *qtype;
3360 char vendor[16], product[48], revision[16], rstr[4];
3361
3362 type = SID_TYPE(inq_data);
3363
3364 /*
3365 * Figure out basic device type and qualifier.
3366 */
3367 if (SID_QUAL_IS_VENDOR_UNIQUE(inq_data)) {
3368 qtype = "(vendor-unique qualifier)";
3369 } else {
3370 switch (SID_QUAL(inq_data)) {
3371 case SID_QUAL_LU_CONNECTED:
3372 qtype = "";
3373 break;
3374
3375 case SID_QUAL_LU_OFFLINE:
3376 qtype = "(offline)";
3377 break;
3378
3379 case SID_QUAL_RSVD:
3380 qtype = "(reserved qualifier)";
3381 break;
3382 default:
3383 case SID_QUAL_BAD_LU:
3384 qtype = "(LUN not supported)";
3385 break;
3386 }
3387 }
3388
3389 switch (type) {
3390 case T_DIRECT:
3391 dtype = "Direct Access";
3392 break;
3393 case T_SEQUENTIAL:
3394 dtype = "Sequential Access";
3395 break;
3396 case T_PRINTER:
3397 dtype = "Printer";
3398 break;
3399 case T_PROCESSOR:
3400 dtype = "Processor";
3401 break;
3402 case T_WORM:
3403 dtype = "WORM";
3404 break;
3405 case T_CDROM:
3406 dtype = "CD-ROM";
3407 break;
3408 case T_SCANNER:
3409 dtype = "Scanner";
3410 break;
3411 case T_OPTICAL:
3412 dtype = "Optical";
3413 break;
3414 case T_CHANGER:
3415 dtype = "Changer";
3416 break;
3417 case T_COMM:
3418 dtype = "Communication";
3419 break;
3420 case T_STORARRAY:
3421 dtype = "Storage Array";
3422 break;
3423 case T_ENCLOSURE:
3424 dtype = "Enclosure Services";
3425 break;
3426 case T_RBC:
3427 dtype = "Simplified Direct Access";
3428 break;
3429 case T_OCRW:
3430 dtype = "Optical Card Read/Write";
3431 break;
3432 case T_OSD:
3433 dtype = "Object-Based Storage";
3434 break;
3435 case T_ADC:
3436 dtype = "Automation/Drive Interface";
3437 break;
3438 case T_NODEVICE:
3439 dtype = "Uninstalled";
3440 break;
3441 default:
3442 dtype = "unknown";
3443 break;
3444 }
3445
3446 cam_strvis(vendor, inq_data->vendor, sizeof(inq_data->vendor),
3447 sizeof(vendor));
3448 cam_strvis(product, inq_data->product, sizeof(inq_data->product),
3449 sizeof(product));
3450 cam_strvis(revision, inq_data->revision, sizeof(inq_data->revision),
3451 sizeof(revision));
3452
3453 if (SID_ANSI_REV(inq_data) == SCSI_REV_CCS)
3454 bcopy("CCS", rstr, 4);
3455 else
3456 ksnprintf(rstr, sizeof (rstr), "%d", SID_ANSI_REV(inq_data));
3457 kprintf("<%s %s %s> %s %s SCSI-%s device %s\n",
3458 vendor, product, revision,
3459 SID_IS_REMOVABLE(inq_data) ? "Removable" : "Fixed",
3460 dtype, rstr, qtype);
3461 }
3462
3463 /*
3464 * Table of syncrates that don't follow the "divisible by 4"
3465 * rule. This table will be expanded in future SCSI specs.
3466 */
3467 static struct {
3468 u_int period_factor;
3469 u_int period; /* in 100ths of ns */
3470 } scsi_syncrates[] = {
3471 { 0x08, 625 }, /* FAST-160 */
3472 { 0x09, 1250 }, /* FAST-80 */
3473 { 0x0a, 2500 }, /* FAST-40 40MHz */
3474 { 0x0b, 3030 }, /* FAST-40 33MHz */
3475 { 0x0c, 5000 } /* FAST-20 */
3476 };
3477
3478 /*
3479 * Return the frequency in kHz corresponding to the given
3480 * sync period factor.
3481 */
3482 u_int
scsi_calc_syncsrate(u_int period_factor)3483 scsi_calc_syncsrate(u_int period_factor)
3484 {
3485 int i;
3486 int num_syncrates;
3487
3488 /*
3489 * It's a bug if period is zero, but if it is anyway, don't
3490 * die with a divide fault- instead return something which
3491 * 'approximates' async
3492 */
3493 if (period_factor == 0) {
3494 return (3300);
3495 }
3496
3497 num_syncrates = NELEM(scsi_syncrates);
3498 /* See if the period is in the "exception" table */
3499 for (i = 0; i < num_syncrates; i++) {
3500
3501 if (period_factor == scsi_syncrates[i].period_factor) {
3502 /* Period in kHz */
3503 return (100000000 / scsi_syncrates[i].period);
3504 }
3505 }
3506
3507 /*
3508 * Wasn't in the table, so use the standard
3509 * 4 times conversion.
3510 */
3511 return (10000000 / (period_factor * 4 * 10));
3512 }
3513
3514 /*
3515 * Return the SCSI sync parameter that corresponsd to
3516 * the passed in period in 10ths of ns.
3517 */
3518 u_int
scsi_calc_syncparam(u_int period)3519 scsi_calc_syncparam(u_int period)
3520 {
3521 int i;
3522 int num_syncrates;
3523
3524 if (period == 0)
3525 return (~0); /* Async */
3526
3527 /* Adjust for exception table being in 100ths. */
3528 period *= 10;
3529 num_syncrates = NELEM(scsi_syncrates);
3530 /* See if the period is in the "exception" table */
3531 for (i = 0; i < num_syncrates; i++) {
3532
3533 if (period <= scsi_syncrates[i].period) {
3534 /* Period in 100ths of ns */
3535 return (scsi_syncrates[i].period_factor);
3536 }
3537 }
3538
3539 /*
3540 * Wasn't in the table, so use the standard
3541 * 1/4 period in ns conversion.
3542 */
3543 return (period/400);
3544 }
3545
3546 void
scsi_test_unit_ready(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,u_int8_t sense_len,u_int32_t timeout)3547 scsi_test_unit_ready(struct ccb_scsiio *csio, u_int32_t retries,
3548 void (*cbfcnp)(struct cam_periph *, union ccb *),
3549 u_int8_t tag_action, u_int8_t sense_len, u_int32_t timeout)
3550 {
3551 struct scsi_test_unit_ready *scsi_cmd;
3552
3553 cam_fill_csio(csio,
3554 retries,
3555 cbfcnp,
3556 CAM_DIR_NONE,
3557 tag_action,
3558 /*data_ptr*/NULL,
3559 /*dxfer_len*/0,
3560 sense_len,
3561 sizeof(*scsi_cmd),
3562 timeout);
3563
3564 scsi_cmd = (struct scsi_test_unit_ready *)&csio->cdb_io.cdb_bytes;
3565 bzero(scsi_cmd, sizeof(*scsi_cmd));
3566 scsi_cmd->opcode = TEST_UNIT_READY;
3567 }
3568
3569 void
scsi_request_sense(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),void * data_ptr,u_int8_t dxfer_len,u_int8_t tag_action,u_int8_t sense_len,u_int32_t timeout)3570 scsi_request_sense(struct ccb_scsiio *csio, u_int32_t retries,
3571 void (*cbfcnp)(struct cam_periph *, union ccb *),
3572 void *data_ptr, u_int8_t dxfer_len, u_int8_t tag_action,
3573 u_int8_t sense_len, u_int32_t timeout)
3574 {
3575 struct scsi_request_sense *scsi_cmd;
3576
3577 cam_fill_csio(csio,
3578 retries,
3579 cbfcnp,
3580 CAM_DIR_IN,
3581 tag_action,
3582 data_ptr,
3583 dxfer_len,
3584 sense_len,
3585 sizeof(*scsi_cmd),
3586 timeout);
3587
3588 scsi_cmd = (struct scsi_request_sense *)&csio->cdb_io.cdb_bytes;
3589 bzero(scsi_cmd, sizeof(*scsi_cmd));
3590 scsi_cmd->opcode = REQUEST_SENSE;
3591 scsi_cmd->length = dxfer_len;
3592 }
3593
3594 void
scsi_inquiry(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,u_int8_t * inq_buf,u_int32_t inq_len,int evpd,u_int8_t page_code,u_int8_t sense_len,u_int32_t timeout)3595 scsi_inquiry(struct ccb_scsiio *csio, u_int32_t retries,
3596 void (*cbfcnp)(struct cam_periph *, union ccb *),
3597 u_int8_t tag_action, u_int8_t *inq_buf, u_int32_t inq_len,
3598 int evpd, u_int8_t page_code, u_int8_t sense_len,
3599 u_int32_t timeout)
3600 {
3601 struct scsi_inquiry *scsi_cmd;
3602
3603 cam_fill_csio(csio,
3604 retries,
3605 cbfcnp,
3606 /*flags*/CAM_DIR_IN,
3607 tag_action,
3608 /*data_ptr*/inq_buf,
3609 /*dxfer_len*/inq_len,
3610 sense_len,
3611 sizeof(*scsi_cmd),
3612 timeout);
3613
3614 scsi_cmd = (struct scsi_inquiry *)&csio->cdb_io.cdb_bytes;
3615 bzero(scsi_cmd, sizeof(*scsi_cmd));
3616 scsi_cmd->opcode = INQUIRY;
3617 if (evpd) {
3618 scsi_cmd->byte2 |= SI_EVPD;
3619 scsi_cmd->page_code = page_code;
3620 }
3621 /*
3622 * A 'transfer units' count of 256 is coded as
3623 * zero for all commands with a single byte count
3624 * field.
3625 */
3626 if (inq_len == 256)
3627 inq_len = 0;
3628 scsi_cmd->length = inq_len;
3629 }
3630
3631 void
scsi_mode_sense(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,int dbd,u_int8_t page_code,u_int8_t page,u_int8_t * param_buf,u_int32_t param_len,u_int8_t sense_len,u_int32_t timeout)3632 scsi_mode_sense(struct ccb_scsiio *csio, u_int32_t retries,
3633 void (*cbfcnp)(struct cam_periph *, union ccb *),
3634 u_int8_t tag_action, int dbd, u_int8_t page_code,
3635 u_int8_t page, u_int8_t *param_buf, u_int32_t param_len,
3636 u_int8_t sense_len, u_int32_t timeout)
3637 {
3638 scsi_mode_sense_len(csio, retries, cbfcnp, tag_action, dbd,
3639 page_code, page, param_buf, param_len, 0,
3640 sense_len, timeout);
3641 }
3642
3643 void
scsi_mode_sense_len(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,int dbd,u_int8_t page_code,u_int8_t page,u_int8_t * param_buf,u_int32_t param_len,int minimum_cmd_size,u_int8_t sense_len,u_int32_t timeout)3644 scsi_mode_sense_len(struct ccb_scsiio *csio, u_int32_t retries,
3645 void (*cbfcnp)(struct cam_periph *, union ccb *),
3646 u_int8_t tag_action, int dbd, u_int8_t page_code,
3647 u_int8_t page, u_int8_t *param_buf, u_int32_t param_len,
3648 int minimum_cmd_size, u_int8_t sense_len, u_int32_t timeout)
3649 {
3650 u_int8_t cdb_len;
3651
3652 /*
3653 * Use the smallest possible command to perform the operation.
3654 */
3655 if ((param_len < 256) && (minimum_cmd_size < 10)) {
3656 /*
3657 * We can fit in a 6 byte cdb.
3658 */
3659 struct scsi_mode_sense_6 *scsi_cmd;
3660
3661 scsi_cmd = (struct scsi_mode_sense_6 *)&csio->cdb_io.cdb_bytes;
3662 bzero(scsi_cmd, sizeof(*scsi_cmd));
3663 scsi_cmd->opcode = MODE_SENSE_6;
3664 if (dbd != 0)
3665 scsi_cmd->byte2 |= SMS_DBD;
3666 scsi_cmd->page = page_code | page;
3667 scsi_cmd->length = param_len;
3668 cdb_len = sizeof(*scsi_cmd);
3669 } else {
3670 /*
3671 * Need a 10 byte cdb.
3672 */
3673 struct scsi_mode_sense_10 *scsi_cmd;
3674
3675 scsi_cmd = (struct scsi_mode_sense_10 *)&csio->cdb_io.cdb_bytes;
3676 bzero(scsi_cmd, sizeof(*scsi_cmd));
3677 scsi_cmd->opcode = MODE_SENSE_10;
3678 if (dbd != 0)
3679 scsi_cmd->byte2 |= SMS_DBD;
3680 scsi_cmd->page = page_code | page;
3681 scsi_ulto2b(param_len, scsi_cmd->length);
3682 cdb_len = sizeof(*scsi_cmd);
3683 }
3684 cam_fill_csio(csio,
3685 retries,
3686 cbfcnp,
3687 CAM_DIR_IN,
3688 tag_action,
3689 param_buf,
3690 param_len,
3691 sense_len,
3692 cdb_len,
3693 timeout);
3694 }
3695
3696 void
scsi_mode_select(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,int scsi_page_fmt,int save_pages,u_int8_t * param_buf,u_int32_t param_len,u_int8_t sense_len,u_int32_t timeout)3697 scsi_mode_select(struct ccb_scsiio *csio, u_int32_t retries,
3698 void (*cbfcnp)(struct cam_periph *, union ccb *),
3699 u_int8_t tag_action, int scsi_page_fmt, int save_pages,
3700 u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len,
3701 u_int32_t timeout)
3702 {
3703 scsi_mode_select_len(csio, retries, cbfcnp, tag_action,
3704 scsi_page_fmt, save_pages, param_buf,
3705 param_len, 0, sense_len, timeout);
3706 }
3707
3708 void
scsi_mode_select_len(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,int scsi_page_fmt,int save_pages,u_int8_t * param_buf,u_int32_t param_len,int minimum_cmd_size,u_int8_t sense_len,u_int32_t timeout)3709 scsi_mode_select_len(struct ccb_scsiio *csio, u_int32_t retries,
3710 void (*cbfcnp)(struct cam_periph *, union ccb *),
3711 u_int8_t tag_action, int scsi_page_fmt, int save_pages,
3712 u_int8_t *param_buf, u_int32_t param_len,
3713 int minimum_cmd_size, u_int8_t sense_len,
3714 u_int32_t timeout)
3715 {
3716 u_int8_t cdb_len;
3717
3718 /*
3719 * Use the smallest possible command to perform the operation.
3720 */
3721 if ((param_len < 256) && (minimum_cmd_size < 10)) {
3722 /*
3723 * We can fit in a 6 byte cdb.
3724 */
3725 struct scsi_mode_select_6 *scsi_cmd;
3726
3727 scsi_cmd = (struct scsi_mode_select_6 *)&csio->cdb_io.cdb_bytes;
3728 bzero(scsi_cmd, sizeof(*scsi_cmd));
3729 scsi_cmd->opcode = MODE_SELECT_6;
3730 if (scsi_page_fmt != 0)
3731 scsi_cmd->byte2 |= SMS_PF;
3732 if (save_pages != 0)
3733 scsi_cmd->byte2 |= SMS_SP;
3734 scsi_cmd->length = param_len;
3735 cdb_len = sizeof(*scsi_cmd);
3736 } else {
3737 /*
3738 * Need a 10 byte cdb.
3739 */
3740 struct scsi_mode_select_10 *scsi_cmd;
3741
3742 scsi_cmd =
3743 (struct scsi_mode_select_10 *)&csio->cdb_io.cdb_bytes;
3744 bzero(scsi_cmd, sizeof(*scsi_cmd));
3745 scsi_cmd->opcode = MODE_SELECT_10;
3746 if (scsi_page_fmt != 0)
3747 scsi_cmd->byte2 |= SMS_PF;
3748 if (save_pages != 0)
3749 scsi_cmd->byte2 |= SMS_SP;
3750 scsi_ulto2b(param_len, scsi_cmd->length);
3751 cdb_len = sizeof(*scsi_cmd);
3752 }
3753 cam_fill_csio(csio,
3754 retries,
3755 cbfcnp,
3756 CAM_DIR_OUT,
3757 tag_action,
3758 param_buf,
3759 param_len,
3760 sense_len,
3761 cdb_len,
3762 timeout);
3763 }
3764
3765 void
scsi_read_capacity_16(struct ccb_scsiio * csio,uint32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),uint8_t tag_action,uint64_t lba,int reladr,int pmi,struct scsi_read_capacity_data_16 * rcap_buf,uint8_t sense_len,uint32_t timeout)3766 scsi_read_capacity_16(struct ccb_scsiio *csio, uint32_t retries,
3767 void (*cbfcnp)(struct cam_periph *, union ccb *),
3768 uint8_t tag_action, uint64_t lba, int reladr, int pmi,
3769 struct scsi_read_capacity_data_16 *rcap_buf,
3770 uint8_t sense_len, uint32_t timeout)
3771 {
3772 struct scsi_read_capacity_16 *scsi_cmd;
3773
3774 cam_fill_csio(csio,
3775 retries,
3776 cbfcnp,
3777 /*flags*/CAM_DIR_IN,
3778 tag_action,
3779 /*data_ptr*/(u_int8_t *)rcap_buf,
3780 /*dxfer_len*/sizeof(*rcap_buf),
3781 sense_len,
3782 sizeof(*scsi_cmd),
3783 timeout);
3784 scsi_cmd = (struct scsi_read_capacity_16 *)&csio->cdb_io.cdb_bytes;
3785 bzero(scsi_cmd, sizeof(*scsi_cmd));
3786 scsi_cmd->opcode = READ_CAPACITY_16;
3787 scsi_cmd->service_action = SRC16_SERVICE_ACTION;
3788 scsi_u64to8b(lba, scsi_cmd->addr);
3789 scsi_ulto4b(sizeof(*rcap_buf), scsi_cmd->alloc_len);
3790 if (pmi)
3791 reladr |= SRC16_PMI;
3792 if (reladr)
3793 reladr |= SRC16_RELADR;
3794 }
3795
3796 /*
3797 * Prevent or allow the user to remove the media
3798 */
3799 void
scsi_prevent(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,u_int8_t action,u_int8_t sense_len,u_int32_t timeout)3800 scsi_prevent(struct ccb_scsiio *csio, u_int32_t retries,
3801 void (*cbfcnp)(struct cam_periph *, union ccb *),
3802 u_int8_t tag_action, u_int8_t action,
3803 u_int8_t sense_len, u_int32_t timeout)
3804 {
3805 struct scsi_prevent *scsi_cmd;
3806
3807 cam_fill_csio(csio,
3808 retries,
3809 cbfcnp,
3810 /*flags*/CAM_DIR_NONE,
3811 tag_action,
3812 /*data_ptr*/NULL,
3813 /*dxfer_len*/0,
3814 sense_len,
3815 sizeof(*scsi_cmd),
3816 timeout);
3817
3818 scsi_cmd = (struct scsi_prevent *)&csio->cdb_io.cdb_bytes;
3819 bzero(scsi_cmd, sizeof(*scsi_cmd));
3820 scsi_cmd->opcode = PREVENT_ALLOW;
3821 scsi_cmd->how = action;
3822 }
3823
3824 /* XXX allow specification of address and PMI bit and LBA */
3825 void
scsi_read_capacity(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,struct scsi_read_capacity_data * rcap_buf,u_int8_t sense_len,u_int32_t timeout)3826 scsi_read_capacity(struct ccb_scsiio *csio, u_int32_t retries,
3827 void (*cbfcnp)(struct cam_periph *, union ccb *),
3828 u_int8_t tag_action,
3829 struct scsi_read_capacity_data *rcap_buf,
3830 u_int8_t sense_len, u_int32_t timeout)
3831 {
3832 struct scsi_read_capacity *scsi_cmd;
3833
3834 cam_fill_csio(csio,
3835 retries,
3836 cbfcnp,
3837 /*flags*/CAM_DIR_IN,
3838 tag_action,
3839 /*data_ptr*/(u_int8_t *)rcap_buf,
3840 /*dxfer_len*/sizeof(*rcap_buf),
3841 sense_len,
3842 sizeof(*scsi_cmd),
3843 timeout);
3844
3845 scsi_cmd = (struct scsi_read_capacity *)&csio->cdb_io.cdb_bytes;
3846 bzero(scsi_cmd, sizeof(*scsi_cmd));
3847 scsi_cmd->opcode = READ_CAPACITY;
3848 }
3849
3850 void
scsi_report_luns(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,u_int8_t select_report,struct scsi_report_luns_data * rpl_buf,u_int32_t alloc_len,u_int8_t sense_len,u_int32_t timeout)3851 scsi_report_luns(struct ccb_scsiio *csio, u_int32_t retries,
3852 void (*cbfcnp)(struct cam_periph *, union ccb *),
3853 u_int8_t tag_action, u_int8_t select_report,
3854 struct scsi_report_luns_data *rpl_buf, u_int32_t alloc_len,
3855 u_int8_t sense_len, u_int32_t timeout)
3856 {
3857 struct scsi_report_luns *scsi_cmd;
3858
3859 cam_fill_csio(csio,
3860 retries,
3861 cbfcnp,
3862 /*flags*/CAM_DIR_IN,
3863 tag_action,
3864 /*data_ptr*/(u_int8_t *)rpl_buf,
3865 /*dxfer_len*/alloc_len,
3866 sense_len,
3867 sizeof(*scsi_cmd),
3868 timeout);
3869 scsi_cmd = (struct scsi_report_luns *)&csio->cdb_io.cdb_bytes;
3870 bzero(scsi_cmd, sizeof(*scsi_cmd));
3871 scsi_cmd->opcode = REPORT_LUNS;
3872 scsi_cmd->select_report = select_report;
3873 scsi_ulto4b(alloc_len, scsi_cmd->length);
3874 }
3875
3876 /*
3877 * Syncronize the media to the contents of the cache for
3878 * the given lba/count pair. Specifying 0/0 means sync
3879 * the whole cache.
3880 */
3881 void
scsi_synchronize_cache(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,u_int32_t begin_lba,u_int16_t lb_count,u_int8_t sense_len,u_int32_t timeout)3882 scsi_synchronize_cache(struct ccb_scsiio *csio, u_int32_t retries,
3883 void (*cbfcnp)(struct cam_periph *, union ccb *),
3884 u_int8_t tag_action, u_int32_t begin_lba,
3885 u_int16_t lb_count, u_int8_t sense_len,
3886 u_int32_t timeout)
3887 {
3888 struct scsi_sync_cache *scsi_cmd;
3889
3890 cam_fill_csio(csio,
3891 retries,
3892 cbfcnp,
3893 /*flags*/CAM_DIR_NONE,
3894 tag_action,
3895 /*data_ptr*/NULL,
3896 /*dxfer_len*/0,
3897 sense_len,
3898 sizeof(*scsi_cmd),
3899 timeout);
3900
3901 scsi_cmd = (struct scsi_sync_cache *)&csio->cdb_io.cdb_bytes;
3902 bzero(scsi_cmd, sizeof(*scsi_cmd));
3903 scsi_cmd->opcode = SYNCHRONIZE_CACHE;
3904 scsi_ulto4b(begin_lba, scsi_cmd->begin_lba);
3905 scsi_ulto2b(lb_count, scsi_cmd->lb_count);
3906 }
3907
3908 void
scsi_read_write(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,int readop,u_int8_t byte2,int minimum_cmd_size,u_int64_t lba,u_int32_t block_count,u_int8_t * data_ptr,u_int32_t dxfer_len,u_int8_t sense_len,u_int32_t timeout)3909 scsi_read_write(struct ccb_scsiio *csio, u_int32_t retries,
3910 void (*cbfcnp)(struct cam_periph *, union ccb *),
3911 u_int8_t tag_action, int readop, u_int8_t byte2,
3912 int minimum_cmd_size, u_int64_t lba, u_int32_t block_count,
3913 u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len,
3914 u_int32_t timeout)
3915 {
3916 u_int8_t cdb_len;
3917
3918 /*
3919 * Use the smallest possible command to perform the operation
3920 * as some legacy hardware does not support the 10 byte commands.
3921 * If any of the bits in byte2 is set, we have to go with a larger
3922 * command.
3923 */
3924 if ((minimum_cmd_size < 10)
3925 && ((lba & 0x1fffff) == lba)
3926 && ((block_count & 0xff) == block_count)
3927 && (byte2 == 0)) {
3928 /*
3929 * We can fit in a 6 byte cdb.
3930 */
3931 struct scsi_rw_6 *scsi_cmd;
3932
3933 scsi_cmd = (struct scsi_rw_6 *)&csio->cdb_io.cdb_bytes;
3934 scsi_cmd->opcode = readop ? READ_6 : WRITE_6;
3935 scsi_ulto3b(lba, scsi_cmd->addr);
3936 scsi_cmd->length = block_count & 0xff;
3937 scsi_cmd->control = 0;
3938 cdb_len = sizeof(*scsi_cmd);
3939
3940 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE,
3941 ("6byte: %x%x%x:%d:%d\n", scsi_cmd->addr[0],
3942 scsi_cmd->addr[1], scsi_cmd->addr[2],
3943 scsi_cmd->length, dxfer_len));
3944 } else if ((minimum_cmd_size < 12)
3945 && ((block_count & 0xffff) == block_count)
3946 && ((lba & 0xffffffffU) == lba)) {
3947 /*
3948 * Need a 10 byte cdb.
3949 */
3950 struct scsi_rw_10 *scsi_cmd;
3951
3952 scsi_cmd = (struct scsi_rw_10 *)&csio->cdb_io.cdb_bytes;
3953 scsi_cmd->opcode = readop ? READ_10 : WRITE_10;
3954 scsi_cmd->byte2 = byte2;
3955 scsi_ulto4b(lba, scsi_cmd->addr);
3956 scsi_cmd->reserved = 0;
3957 scsi_ulto2b(block_count, scsi_cmd->length);
3958 scsi_cmd->control = 0;
3959 cdb_len = sizeof(*scsi_cmd);
3960
3961 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE,
3962 ("10byte: %x%x%x%x:%x%x: %d\n", scsi_cmd->addr[0],
3963 scsi_cmd->addr[1], scsi_cmd->addr[2],
3964 scsi_cmd->addr[3], scsi_cmd->length[0],
3965 scsi_cmd->length[1], dxfer_len));
3966 } else if ((minimum_cmd_size < 16)
3967 && ((block_count & 0xffffffffU) == block_count)
3968 && ((lba & 0xffffffffU) == lba)) {
3969 /*
3970 * The block count is too big for a 10 byte CDB, use a 12
3971 * byte CDB.
3972 */
3973 struct scsi_rw_12 *scsi_cmd;
3974
3975 scsi_cmd = (struct scsi_rw_12 *)&csio->cdb_io.cdb_bytes;
3976 scsi_cmd->opcode = readop ? READ_12 : WRITE_12;
3977 scsi_cmd->byte2 = byte2;
3978 scsi_ulto4b(lba, scsi_cmd->addr);
3979 scsi_cmd->reserved = 0;
3980 scsi_ulto4b(block_count, scsi_cmd->length);
3981 scsi_cmd->control = 0;
3982 cdb_len = sizeof(*scsi_cmd);
3983
3984 CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE,
3985 ("12byte: %x%x%x%x:%x%x%x%x: %d\n", scsi_cmd->addr[0],
3986 scsi_cmd->addr[1], scsi_cmd->addr[2],
3987 scsi_cmd->addr[3], scsi_cmd->length[0],
3988 scsi_cmd->length[1], scsi_cmd->length[2],
3989 scsi_cmd->length[3], dxfer_len));
3990 } else {
3991 /*
3992 * 16 byte CDB. We'll only get here if the LBA is larger
3993 * than 2^32, or if the user asks for a 16 byte command.
3994 */
3995 struct scsi_rw_16 *scsi_cmd;
3996
3997 scsi_cmd = (struct scsi_rw_16 *)&csio->cdb_io.cdb_bytes;
3998 scsi_cmd->opcode = readop ? READ_16 : WRITE_16;
3999 scsi_cmd->byte2 = byte2;
4000 scsi_u64to8b(lba, scsi_cmd->addr);
4001 scsi_cmd->reserved = 0;
4002 scsi_ulto4b(block_count, scsi_cmd->length);
4003 scsi_cmd->control = 0;
4004 cdb_len = sizeof(*scsi_cmd);
4005 }
4006 cam_fill_csio(csio,
4007 retries,
4008 cbfcnp,
4009 /*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT,
4010 tag_action,
4011 data_ptr,
4012 dxfer_len,
4013 sense_len,
4014 cdb_len,
4015 timeout);
4016 }
4017
4018 void
scsi_start_stop(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,int start,int load_eject,int immediate,u_int8_t sense_len,u_int32_t timeout)4019 scsi_start_stop(struct ccb_scsiio *csio, u_int32_t retries,
4020 void (*cbfcnp)(struct cam_periph *, union ccb *),
4021 u_int8_t tag_action, int start, int load_eject,
4022 int immediate, u_int8_t sense_len, u_int32_t timeout)
4023 {
4024 struct scsi_start_stop_unit *scsi_cmd;
4025 int extra_flags = 0;
4026
4027 scsi_cmd = (struct scsi_start_stop_unit *)&csio->cdb_io.cdb_bytes;
4028 bzero(scsi_cmd, sizeof(*scsi_cmd));
4029 scsi_cmd->opcode = START_STOP_UNIT;
4030 if (start != 0) {
4031 scsi_cmd->how |= SSS_START;
4032 /* it takes a lot of power to start a drive */
4033 extra_flags |= CAM_HIGH_POWER;
4034 }
4035 if (load_eject != 0)
4036 scsi_cmd->how |= SSS_LOEJ;
4037 if (immediate != 0)
4038 scsi_cmd->byte2 |= SSS_IMMED;
4039
4040 cam_fill_csio(csio,
4041 retries,
4042 cbfcnp,
4043 /*flags*/CAM_DIR_NONE | extra_flags,
4044 tag_action,
4045 /*data_ptr*/NULL,
4046 /*dxfer_len*/0,
4047 sense_len,
4048 sizeof(*scsi_cmd),
4049 timeout);
4050
4051 }
4052
4053 void
scsi_log_sense(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,u_int8_t page_code,u_int8_t page,int save_pages,int ppc,u_int32_t paramptr,u_int8_t * param_buf,u_int32_t param_len,u_int8_t sense_len,u_int32_t timeout)4054 scsi_log_sense(struct ccb_scsiio *csio, u_int32_t retries,
4055 void (*cbfcnp)(struct cam_periph *, union ccb *),
4056 u_int8_t tag_action, u_int8_t page_code, u_int8_t page,
4057 int save_pages, int ppc, u_int32_t paramptr,
4058 u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len,
4059 u_int32_t timeout)
4060 {
4061 struct scsi_log_sense *scsi_cmd;
4062 u_int8_t cdb_len;
4063
4064 scsi_cmd = (struct scsi_log_sense *)&csio->cdb_io.cdb_bytes;
4065 bzero(scsi_cmd, sizeof(*scsi_cmd));
4066 scsi_cmd->opcode = LOG_SENSE;
4067 scsi_cmd->page = page_code | page;
4068 if (save_pages != 0)
4069 scsi_cmd->byte2 |= SLS_SP;
4070 if (ppc != 0)
4071 scsi_cmd->byte2 |= SLS_PPC;
4072 scsi_ulto2b(paramptr, scsi_cmd->paramptr);
4073 scsi_ulto2b(param_len, scsi_cmd->length);
4074 cdb_len = sizeof(*scsi_cmd);
4075
4076 cam_fill_csio(csio,
4077 retries,
4078 cbfcnp,
4079 /*flags*/CAM_DIR_IN,
4080 tag_action,
4081 /*data_ptr*/param_buf,
4082 /*dxfer_len*/param_len,
4083 sense_len,
4084 cdb_len,
4085 timeout);
4086 }
4087
4088 void
scsi_log_select(struct ccb_scsiio * csio,u_int32_t retries,void (* cbfcnp)(struct cam_periph *,union ccb *),u_int8_t tag_action,u_int8_t page_code,int save_pages,int pc_reset,u_int8_t * param_buf,u_int32_t param_len,u_int8_t sense_len,u_int32_t timeout)4089 scsi_log_select(struct ccb_scsiio *csio, u_int32_t retries,
4090 void (*cbfcnp)(struct cam_periph *, union ccb *),
4091 u_int8_t tag_action, u_int8_t page_code, int save_pages,
4092 int pc_reset, u_int8_t *param_buf, u_int32_t param_len,
4093 u_int8_t sense_len, u_int32_t timeout)
4094 {
4095 struct scsi_log_select *scsi_cmd;
4096 u_int8_t cdb_len;
4097
4098 scsi_cmd = (struct scsi_log_select *)&csio->cdb_io.cdb_bytes;
4099 bzero(scsi_cmd, sizeof(*scsi_cmd));
4100 scsi_cmd->opcode = LOG_SELECT;
4101 scsi_cmd->page = page_code & SLS_PAGE_CODE;
4102 if (save_pages != 0)
4103 scsi_cmd->byte2 |= SLS_SP;
4104 if (pc_reset != 0)
4105 scsi_cmd->byte2 |= SLS_PCR;
4106 scsi_ulto2b(param_len, scsi_cmd->length);
4107 cdb_len = sizeof(*scsi_cmd);
4108
4109 cam_fill_csio(csio,
4110 retries,
4111 cbfcnp,
4112 /*flags*/CAM_DIR_OUT,
4113 tag_action,
4114 /*data_ptr*/param_buf,
4115 /*dxfer_len*/param_len,
4116 sense_len,
4117 cdb_len,
4118 timeout);
4119 }
4120
4121 /*
4122 * Try make as good a match as possible with
4123 * available sub drivers
4124 */
4125 int
scsi_inquiry_match(caddr_t inqbuffer,caddr_t table_entry)4126 scsi_inquiry_match(caddr_t inqbuffer, caddr_t table_entry)
4127 {
4128 struct scsi_inquiry_pattern *entry;
4129 struct scsi_inquiry_data *inq;
4130
4131 entry = (struct scsi_inquiry_pattern *)table_entry;
4132 inq = (struct scsi_inquiry_data *)inqbuffer;
4133
4134 if (((SID_TYPE(inq) == entry->type)
4135 || (entry->type == T_ANY))
4136 && (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE
4137 : entry->media_type & SIP_MEDIA_FIXED)
4138 && (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0)
4139 && (cam_strmatch(inq->product, entry->product,
4140 sizeof(inq->product)) == 0)
4141 && (cam_strmatch(inq->revision, entry->revision,
4142 sizeof(inq->revision)) == 0)) {
4143 return (0);
4144 }
4145 return (-1);
4146 }
4147
4148 #ifdef _KERNEL
4149 static void
init_scsi_delay(void)4150 init_scsi_delay(void)
4151 {
4152 int delay;
4153
4154 delay = SCSI_DELAY;
4155 TUNABLE_INT_FETCH("kern.cam.scsi_delay", &delay);
4156
4157 if (set_scsi_delay(delay) != 0) {
4158 kprintf("cam: invalid value for tunable kern.cam.scsi_delay\n");
4159 set_scsi_delay(SCSI_DELAY);
4160 }
4161 }
4162 SYSINIT(scsi_delay, SI_BOOT1_TUNABLES, SI_ORDER_ANY, init_scsi_delay, NULL);
4163
4164 static int
sysctl_scsi_delay(SYSCTL_HANDLER_ARGS)4165 sysctl_scsi_delay(SYSCTL_HANDLER_ARGS)
4166 {
4167 int error, delay;
4168
4169 delay = scsi_delay;
4170 error = sysctl_handle_int(oidp, &delay, 0, req);
4171 if (error != 0 || req->newptr == NULL)
4172 return (error);
4173 return (set_scsi_delay(delay));
4174 }
4175 SYSCTL_PROC(_kern_cam, OID_AUTO, scsi_delay, CTLTYPE_INT|CTLFLAG_RW,
4176 0, 0, sysctl_scsi_delay, "I",
4177 "Delay to allow devices to settle after a SCSI bus reset (ms)");
4178
4179 static int
set_scsi_delay(int delay)4180 set_scsi_delay(int delay)
4181 {
4182 /*
4183 * If someone sets this to 0, we assume that they want the
4184 * minimum allowable bus settle delay.
4185 */
4186 if (delay == 0) {
4187 kprintf("cam: using minimum scsi_delay (%dms)\n",
4188 SCSI_MIN_DELAY);
4189 delay = SCSI_MIN_DELAY;
4190 }
4191 if (delay < SCSI_MIN_DELAY)
4192 return (EINVAL);
4193 scsi_delay = delay;
4194 return (0);
4195 }
4196 #endif /* _KERNEL */
4197
4198 /*
4199 * Try make as good a match as possible with
4200 * available sub drivers
4201 */
4202 int
scsi_static_inquiry_match(caddr_t inqbuffer,caddr_t table_entry)4203 scsi_static_inquiry_match(caddr_t inqbuffer, caddr_t table_entry)
4204 {
4205 struct scsi_static_inquiry_pattern *entry;
4206 struct scsi_inquiry_data *inq;
4207
4208 entry = (struct scsi_static_inquiry_pattern *)table_entry;
4209 inq = (struct scsi_inquiry_data *)inqbuffer;
4210
4211 if (((SID_TYPE(inq) == entry->type)
4212 || (entry->type == T_ANY))
4213 && (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE
4214 : entry->media_type & SIP_MEDIA_FIXED)
4215 && (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0)
4216 && (cam_strmatch(inq->product, entry->product,
4217 sizeof(inq->product)) == 0)
4218 && (cam_strmatch(inq->revision, entry->revision,
4219 sizeof(inq->revision)) == 0)) {
4220 return (0);
4221 }
4222 return (-1);
4223 }
4224