1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_HOST_H
3 #define _SCSI_SCSI_HOST_H
4
5 #include <linux/device.h>
6 #include <linux/list.h>
7 #include <linux/types.h>
8 #include <linux/workqueue.h>
9 #include <linux/mutex.h>
10 #include <linux/seq_file.h>
11 #include <linux/blk-mq.h>
12 #include <scsi/scsi.h>
13
14 struct block_device;
15 struct completion;
16 struct module;
17 struct scsi_cmnd;
18 struct scsi_device;
19 struct scsi_target;
20 struct Scsi_Host;
21 struct scsi_transport_template;
22
23
24 #define SG_ALL SG_CHUNK_SIZE
25
26 #define MODE_UNKNOWN 0x00
27 #define MODE_INITIATOR 0x01
28 #define MODE_TARGET 0x02
29
30 /**
31 * enum scsi_timeout_action - How to handle a command that timed out.
32 * @SCSI_EH_DONE: The command has already been completed.
33 * @SCSI_EH_RESET_TIMER: Reset the timer and continue waiting for completion.
34 * @SCSI_EH_NOT_HANDLED: The command has not yet finished. Abort the command.
35 */
36 enum scsi_timeout_action {
37 SCSI_EH_DONE,
38 SCSI_EH_RESET_TIMER,
39 SCSI_EH_NOT_HANDLED,
40 };
41
42 struct scsi_host_template {
43 /*
44 * Put fields referenced in IO submission path together in
45 * same cacheline
46 */
47
48 /*
49 * Additional per-command data allocated for the driver.
50 */
51 unsigned int cmd_size;
52
53 /*
54 * The queuecommand function is used to queue up a scsi
55 * command block to the LLDD. When the driver finished
56 * processing the command the done callback is invoked.
57 *
58 * If queuecommand returns 0, then the driver has accepted the
59 * command. It must also push it to the HBA if the scsi_cmnd
60 * flag SCMD_LAST is set, or if the driver does not implement
61 * commit_rqs. The done() function must be called on the command
62 * when the driver has finished with it. (you may call done on the
63 * command before queuecommand returns, but in this case you
64 * *must* return 0 from queuecommand).
65 *
66 * Queuecommand may also reject the command, in which case it may
67 * not touch the command and must not call done() for it.
68 *
69 * There are two possible rejection returns:
70 *
71 * SCSI_MLQUEUE_DEVICE_BUSY: Block this device temporarily, but
72 * allow commands to other devices serviced by this host.
73 *
74 * SCSI_MLQUEUE_HOST_BUSY: Block all devices served by this
75 * host temporarily.
76 *
77 * For compatibility, any other non-zero return is treated the
78 * same as SCSI_MLQUEUE_HOST_BUSY.
79 *
80 * NOTE: "temporarily" means either until the next command for#
81 * this device/host completes, or a period of time determined by
82 * I/O pressure in the system if there are no other outstanding
83 * commands.
84 *
85 * STATUS: REQUIRED
86 */
87 int (* queuecommand)(struct Scsi_Host *, struct scsi_cmnd *);
88
89 /*
90 * The commit_rqs function is used to trigger a hardware
91 * doorbell after some requests have been queued with
92 * queuecommand, when an error is encountered before sending
93 * the request with SCMD_LAST set.
94 *
95 * STATUS: OPTIONAL
96 */
97 void (*commit_rqs)(struct Scsi_Host *, u16);
98
99 struct module *module;
100 const char *name;
101
102 /*
103 * The info function will return whatever useful information the
104 * developer sees fit. If not provided, then the name field will
105 * be used instead.
106 *
107 * Status: OPTIONAL
108 */
109 const char *(*info)(struct Scsi_Host *);
110
111 /*
112 * Ioctl interface
113 *
114 * Status: OPTIONAL
115 */
116 int (*ioctl)(struct scsi_device *dev, unsigned int cmd,
117 void __user *arg);
118
119
120 #ifdef CONFIG_COMPAT
121 /*
122 * Compat handler. Handle 32bit ABI.
123 * When unknown ioctl is passed return -ENOIOCTLCMD.
124 *
125 * Status: OPTIONAL
126 */
127 int (*compat_ioctl)(struct scsi_device *dev, unsigned int cmd,
128 void __user *arg);
129 #endif
130
131 int (*init_cmd_priv)(struct Scsi_Host *shost, struct scsi_cmnd *cmd);
132 int (*exit_cmd_priv)(struct Scsi_Host *shost, struct scsi_cmnd *cmd);
133
134 /*
135 * This is an error handling strategy routine. You don't need to
136 * define one of these if you don't want to - there is a default
137 * routine that is present that should work in most cases. For those
138 * driver authors that have the inclination and ability to write their
139 * own strategy routine, this is where it is specified. Note - the
140 * strategy routine is *ALWAYS* run in the context of the kernel eh
141 * thread. Thus you are guaranteed to *NOT* be in an interrupt
142 * handler when you execute this, and you are also guaranteed to
143 * *NOT* have any other commands being queued while you are in the
144 * strategy routine. When you return from this function, operations
145 * return to normal.
146 *
147 * See scsi_error.c scsi_unjam_host for additional comments about
148 * what this function should and should not be attempting to do.
149 *
150 * Status: REQUIRED (at least one of them)
151 */
152 int (* eh_abort_handler)(struct scsi_cmnd *);
153 int (* eh_device_reset_handler)(struct scsi_cmnd *);
154 int (* eh_target_reset_handler)(struct scsi_cmnd *);
155 int (* eh_bus_reset_handler)(struct scsi_cmnd *);
156 int (* eh_host_reset_handler)(struct scsi_cmnd *);
157
158 /*
159 * Before the mid layer attempts to scan for a new device where none
160 * currently exists, it will call this entry in your driver. Should
161 * your driver need to allocate any structs or perform any other init
162 * items in order to send commands to a currently unused target/lun
163 * combo, then this is where you can perform those allocations. This
164 * is specifically so that drivers won't have to perform any kind of
165 * "is this a new device" checks in their queuecommand routine,
166 * thereby making the hot path a bit quicker.
167 *
168 * Return values: 0 on success, non-0 on failure
169 *
170 * Deallocation: If we didn't find any devices at this ID, you will
171 * get an immediate call to slave_destroy(). If we find something
172 * here then you will get a call to slave_configure(), then the
173 * device will be used for however long it is kept around, then when
174 * the device is removed from the system (or * possibly at reboot
175 * time), you will then get a call to slave_destroy(). This is
176 * assuming you implement slave_configure and slave_destroy.
177 * However, if you allocate memory and hang it off the device struct,
178 * then you must implement the slave_destroy() routine at a minimum
179 * in order to avoid leaking memory
180 * each time a device is tore down.
181 *
182 * Status: OPTIONAL
183 */
184 int (* slave_alloc)(struct scsi_device *);
185
186 /*
187 * Once the device has responded to an INQUIRY and we know the
188 * device is online, we call into the low level driver with the
189 * struct scsi_device *. If the low level device driver implements
190 * this function, it *must* perform the task of setting the queue
191 * depth on the device. All other tasks are optional and depend
192 * on what the driver supports and various implementation details.
193 *
194 * Things currently recommended to be handled at this time include:
195 *
196 * 1. Setting the device queue depth. Proper setting of this is
197 * described in the comments for scsi_change_queue_depth.
198 * 2. Determining if the device supports the various synchronous
199 * negotiation protocols. The device struct will already have
200 * responded to INQUIRY and the results of the standard items
201 * will have been shoved into the various device flag bits, eg.
202 * device->sdtr will be true if the device supports SDTR messages.
203 * 3. Allocating command structs that the device will need.
204 * 4. Setting the default timeout on this device (if needed).
205 * 5. Anything else the low level driver might want to do on a device
206 * specific setup basis...
207 * 6. Return 0 on success, non-0 on error. The device will be marked
208 * as offline on error so that no access will occur. If you return
209 * non-0, your slave_destroy routine will never get called for this
210 * device, so don't leave any loose memory hanging around, clean
211 * up after yourself before returning non-0
212 *
213 * Status: OPTIONAL
214 *
215 * Note: slave_configure is the legacy version, use device_configure for
216 * all new code. A driver must never define both.
217 */
218 int (* device_configure)(struct scsi_device *, struct queue_limits *lim);
219 int (* slave_configure)(struct scsi_device *);
220
221 /*
222 * Immediately prior to deallocating the device and after all activity
223 * has ceased the mid layer calls this point so that the low level
224 * driver may completely detach itself from the scsi device and vice
225 * versa. The low level driver is responsible for freeing any memory
226 * it allocated in the slave_alloc or slave_configure calls.
227 *
228 * Status: OPTIONAL
229 */
230 void (* slave_destroy)(struct scsi_device *);
231
232 /*
233 * Before the mid layer attempts to scan for a new device attached
234 * to a target where no target currently exists, it will call this
235 * entry in your driver. Should your driver need to allocate any
236 * structs or perform any other init items in order to send commands
237 * to a currently unused target, then this is where you can perform
238 * those allocations.
239 *
240 * Return values: 0 on success, non-0 on failure
241 *
242 * Status: OPTIONAL
243 */
244 int (* target_alloc)(struct scsi_target *);
245
246 /*
247 * Immediately prior to deallocating the target structure, and
248 * after all activity to attached scsi devices has ceased, the
249 * midlayer calls this point so that the driver may deallocate
250 * and terminate any references to the target.
251 *
252 * Note: This callback is called with the host lock held and hence
253 * must not sleep.
254 *
255 * Status: OPTIONAL
256 */
257 void (* target_destroy)(struct scsi_target *);
258
259 /*
260 * If a host has the ability to discover targets on its own instead
261 * of scanning the entire bus, it can fill in this function and
262 * call scsi_scan_host(). This function will be called periodically
263 * until it returns 1 with the scsi_host and the elapsed time of
264 * the scan in jiffies.
265 *
266 * Status: OPTIONAL
267 */
268 int (* scan_finished)(struct Scsi_Host *, unsigned long);
269
270 /*
271 * If the host wants to be called before the scan starts, but
272 * after the midlayer has set up ready for the scan, it can fill
273 * in this function.
274 *
275 * Status: OPTIONAL
276 */
277 void (* scan_start)(struct Scsi_Host *);
278
279 /*
280 * Fill in this function to allow the queue depth of this host
281 * to be changeable (on a per device basis). Returns either
282 * the current queue depth setting (may be different from what
283 * was passed in) or an error. An error should only be
284 * returned if the requested depth is legal but the driver was
285 * unable to set it. If the requested depth is illegal, the
286 * driver should set and return the closest legal queue depth.
287 *
288 * Status: OPTIONAL
289 */
290 int (* change_queue_depth)(struct scsi_device *, int);
291
292 /*
293 * This functions lets the driver expose the queue mapping
294 * to the block layer.
295 *
296 * Status: OPTIONAL
297 */
298 void (* map_queues)(struct Scsi_Host *shost);
299
300 /*
301 * SCSI interface of blk_poll - poll for IO completions.
302 * Only applicable if SCSI LLD exposes multiple h/w queues.
303 *
304 * Return value: Number of completed entries found.
305 *
306 * Status: OPTIONAL
307 */
308 int (* mq_poll)(struct Scsi_Host *shost, unsigned int queue_num);
309
310 /*
311 * Check if scatterlists need to be padded for DMA draining.
312 *
313 * Status: OPTIONAL
314 */
315 bool (* dma_need_drain)(struct request *rq);
316
317 /*
318 * This function determines the BIOS parameters for a given
319 * harddisk. These tend to be numbers that are made up by
320 * the host adapter. Parameters:
321 * size, device, list (heads, sectors, cylinders)
322 *
323 * Status: OPTIONAL
324 */
325 int (* bios_param)(struct scsi_device *, struct block_device *,
326 sector_t, int []);
327
328 /*
329 * This function is called when one or more partitions on the
330 * device reach beyond the end of the device.
331 *
332 * Status: OPTIONAL
333 */
334 void (*unlock_native_capacity)(struct scsi_device *);
335
336 /*
337 * Can be used to export driver statistics and other infos to the
338 * world outside the kernel ie. userspace and it also provides an
339 * interface to feed the driver with information.
340 *
341 * Status: OBSOLETE
342 */
343 int (*show_info)(struct seq_file *, struct Scsi_Host *);
344 int (*write_info)(struct Scsi_Host *, char *, int);
345
346 /*
347 * This is an optional routine that allows the transport to become
348 * involved when a scsi io timer fires. The return value tells the
349 * timer routine how to finish the io timeout handling.
350 *
351 * Status: OPTIONAL
352 */
353 enum scsi_timeout_action (*eh_timed_out)(struct scsi_cmnd *);
354 /*
355 * Optional routine that allows the transport to decide if a cmd
356 * is retryable. Return true if the transport is in a state the
357 * cmd should be retried on.
358 */
359 bool (*eh_should_retry_cmd)(struct scsi_cmnd *scmd);
360
361 /* This is an optional routine that allows transport to initiate
362 * LLD adapter or firmware reset using sysfs attribute.
363 *
364 * Return values: 0 on success, -ve value on failure.
365 *
366 * Status: OPTIONAL
367 */
368
369 int (*host_reset)(struct Scsi_Host *shost, int reset_type);
370 #define SCSI_ADAPTER_RESET 1
371 #define SCSI_FIRMWARE_RESET 2
372
373
374 /*
375 * Name of proc directory
376 */
377 const char *proc_name;
378
379 /*
380 * This determines if we will use a non-interrupt driven
381 * or an interrupt driven scheme. It is set to the maximum number
382 * of simultaneous commands a single hw queue in HBA will accept.
383 */
384 int can_queue;
385
386 /*
387 * In many instances, especially where disconnect / reconnect are
388 * supported, our host also has an ID on the SCSI bus. If this is
389 * the case, then it must be reserved. Please set this_id to -1 if
390 * your setup is in single initiator mode, and the host lacks an
391 * ID.
392 */
393 int this_id;
394
395 /*
396 * This determines the degree to which the host adapter is capable
397 * of scatter-gather.
398 */
399 unsigned short sg_tablesize;
400 unsigned short sg_prot_tablesize;
401
402 /*
403 * Set this if the host adapter has limitations beside segment count.
404 */
405 unsigned int max_sectors;
406
407 /*
408 * Maximum size in bytes of a single segment.
409 */
410 unsigned int max_segment_size;
411
412 unsigned int dma_alignment;
413
414 /*
415 * DMA scatter gather segment boundary limit. A segment crossing this
416 * boundary will be split in two.
417 */
418 unsigned long dma_boundary;
419
420 unsigned long virt_boundary_mask;
421
422 /*
423 * This specifies "machine infinity" for host templates which don't
424 * limit the transfer size. Note this limit represents an absolute
425 * maximum, and may be over the transfer limits allowed for
426 * individual devices (e.g. 256 for SCSI-1).
427 */
428 #define SCSI_DEFAULT_MAX_SECTORS 1024
429
430 /*
431 * True if this host adapter can make good use of linked commands.
432 * This will allow more than one command to be queued to a given
433 * unit on a given host. Set this to the maximum number of command
434 * blocks to be provided for each device. Set this to 1 for one
435 * command block per lun, 2 for two, etc. Do not set this to 0.
436 * You should make sure that the host adapter will do the right thing
437 * before you try setting this above 1.
438 */
439 short cmd_per_lun;
440
441 /* If use block layer to manage tags, this is tag allocation policy */
442 int tag_alloc_policy;
443
444 /*
445 * Track QUEUE_FULL events and reduce queue depth on demand.
446 */
447 unsigned track_queue_depth:1;
448
449 /*
450 * This specifies the mode that a LLD supports.
451 */
452 unsigned supported_mode:2;
453
454 /*
455 * True for emulated SCSI host adapters (e.g. ATAPI).
456 */
457 unsigned emulated:1;
458
459 /*
460 * True if the low-level driver performs its own reset-settle delays.
461 */
462 unsigned skip_settle_delay:1;
463
464 /* True if the controller does not support WRITE SAME */
465 unsigned no_write_same:1;
466
467 /* True if the host uses host-wide tagspace */
468 unsigned host_tagset:1;
469
470 /* The queuecommand callback may block. See also BLK_MQ_F_BLOCKING. */
471 unsigned queuecommand_may_block:1;
472
473 /*
474 * Countdown for host blocking with no commands outstanding.
475 */
476 unsigned int max_host_blocked;
477
478 /*
479 * Default value for the blocking. If the queue is empty,
480 * host_blocked counts down in the request_fn until it restarts
481 * host operations as zero is reached.
482 *
483 * FIXME: This should probably be a value in the template
484 */
485 #define SCSI_DEFAULT_HOST_BLOCKED 7
486
487 /*
488 * Pointer to the SCSI host sysfs attribute groups, NULL terminated.
489 */
490 const struct attribute_group **shost_groups;
491
492 /*
493 * Pointer to the SCSI device attribute groups for this host,
494 * NULL terminated.
495 */
496 const struct attribute_group **sdev_groups;
497
498 /*
499 * Vendor Identifier associated with the host
500 *
501 * Note: When specifying vendor_id, be sure to read the
502 * Vendor Type and ID formatting requirements specified in
503 * scsi_netlink.h
504 */
505 u64 vendor_id;
506 };
507
508 /*
509 * Temporary #define for host lock push down. Can be removed when all
510 * drivers have been updated to take advantage of unlocked
511 * queuecommand.
512 *
513 */
514 #define DEF_SCSI_QCMD(func_name) \
515 int func_name(struct Scsi_Host *shost, struct scsi_cmnd *cmd) \
516 { \
517 unsigned long irq_flags; \
518 int rc; \
519 spin_lock_irqsave(shost->host_lock, irq_flags); \
520 rc = func_name##_lck(cmd); \
521 spin_unlock_irqrestore(shost->host_lock, irq_flags); \
522 return rc; \
523 }
524
525
526 /*
527 * shost state: If you alter this, you also need to alter scsi_sysfs.c
528 * (for the ascii descriptions) and the state model enforcer:
529 * scsi_host_set_state()
530 */
531 enum scsi_host_state {
532 SHOST_CREATED = 1,
533 SHOST_RUNNING,
534 SHOST_CANCEL,
535 SHOST_DEL,
536 SHOST_RECOVERY,
537 SHOST_CANCEL_RECOVERY,
538 SHOST_DEL_RECOVERY,
539 };
540
541 struct Scsi_Host {
542 /*
543 * __devices is protected by the host_lock, but you should
544 * usually use scsi_device_lookup / shost_for_each_device
545 * to access it and don't care about locking yourself.
546 * In the rare case of being in irq context you can use
547 * their __ prefixed variants with the lock held. NEVER
548 * access this list directly from a driver.
549 */
550 struct list_head __devices;
551 struct list_head __targets;
552
553 struct list_head starved_list;
554
555 spinlock_t default_lock;
556 spinlock_t *host_lock;
557
558 struct mutex scan_mutex;/* serialize scanning activity */
559
560 struct list_head eh_abort_list;
561 struct list_head eh_cmd_q;
562 struct task_struct * ehandler; /* Error recovery thread. */
563 struct completion * eh_action; /* Wait for specific actions on the
564 host. */
565 wait_queue_head_t host_wait;
566 const struct scsi_host_template *hostt;
567 struct scsi_transport_template *transportt;
568
569 struct kref tagset_refcnt;
570 struct completion tagset_freed;
571 /* Area to keep a shared tag map */
572 struct blk_mq_tag_set tag_set;
573
574 atomic_t host_blocked;
575
576 unsigned int host_failed; /* commands that failed.
577 protected by host_lock */
578 unsigned int host_eh_scheduled; /* EH scheduled without command */
579
580 unsigned int host_no; /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
581
582 /* next two fields are used to bound the time spent in error handling */
583 int eh_deadline;
584 unsigned long last_reset;
585
586
587 /*
588 * These three parameters can be used to allow for wide scsi,
589 * and for host adapters that support multiple busses
590 * The last two should be set to 1 more than the actual max id
591 * or lun (e.g. 8 for SCSI parallel systems).
592 */
593 unsigned int max_channel;
594 unsigned int max_id;
595 u64 max_lun;
596
597 /*
598 * This is a unique identifier that must be assigned so that we
599 * have some way of identifying each detected host adapter properly
600 * and uniquely. For hosts that do not support more than one card
601 * in the system at one time, this does not need to be set. It is
602 * initialized to 0 in scsi_register.
603 */
604 unsigned int unique_id;
605
606 /*
607 * The maximum length of SCSI commands that this host can accept.
608 * Probably 12 for most host adapters, but could be 16 for others.
609 * or 260 if the driver supports variable length cdbs.
610 * For drivers that don't set this field, a value of 12 is
611 * assumed.
612 */
613 unsigned short max_cmd_len;
614
615 int this_id;
616 int can_queue;
617 short cmd_per_lun;
618 short unsigned int sg_tablesize;
619 short unsigned int sg_prot_tablesize;
620 unsigned int max_sectors;
621 unsigned int opt_sectors;
622 unsigned int max_segment_size;
623 unsigned int dma_alignment;
624 unsigned long dma_boundary;
625 unsigned long virt_boundary_mask;
626 /*
627 * In scsi-mq mode, the number of hardware queues supported by the LLD.
628 *
629 * Note: it is assumed that each hardware queue has a queue depth of
630 * can_queue. In other words, the total queue depth per host
631 * is nr_hw_queues * can_queue. However, for when host_tagset is set,
632 * the total queue depth is can_queue.
633 */
634 unsigned nr_hw_queues;
635 unsigned nr_maps;
636 unsigned active_mode:2;
637
638 /*
639 * Host has requested that no further requests come through for the
640 * time being.
641 */
642 unsigned host_self_blocked:1;
643
644 /*
645 * Host uses correct SCSI ordering not PC ordering. The bit is
646 * set for the minority of drivers whose authors actually read
647 * the spec ;).
648 */
649 unsigned reverse_ordering:1;
650
651 /* Task mgmt function in progress */
652 unsigned tmf_in_progress:1;
653
654 /* Asynchronous scan in progress */
655 unsigned async_scan:1;
656
657 /* Don't resume host in EH */
658 unsigned eh_noresume:1;
659
660 /* The controller does not support WRITE SAME */
661 unsigned no_write_same:1;
662
663 /* True if the host uses host-wide tagspace */
664 unsigned host_tagset:1;
665
666 /* The queuecommand callback may block. See also BLK_MQ_F_BLOCKING. */
667 unsigned queuecommand_may_block:1;
668
669 /* Host responded with short (<36 bytes) INQUIRY result */
670 unsigned short_inquiry:1;
671
672 /* The transport requires the LUN bits NOT to be stored in CDB[1] */
673 unsigned no_scsi2_lun_in_cdb:1;
674
675 unsigned no_highmem:1;
676
677 /*
678 * Optional work queue to be utilized by the transport
679 */
680 struct workqueue_struct *work_q;
681
682 /*
683 * Task management function work queue
684 */
685 struct workqueue_struct *tmf_work_q;
686
687 /*
688 * Value host_blocked counts down from
689 */
690 unsigned int max_host_blocked;
691
692 /* Protection Information */
693 unsigned int prot_capabilities;
694 unsigned char prot_guard_type;
695
696 /* legacy crap */
697 unsigned long base;
698 unsigned long io_port;
699 unsigned char n_io_port;
700 unsigned char dma_channel;
701 unsigned int irq;
702
703
704 enum scsi_host_state shost_state;
705
706 /* ldm bits */
707 struct device shost_gendev, shost_dev;
708
709 /*
710 * Points to the transport data (if any) which is allocated
711 * separately
712 */
713 void *shost_data;
714
715 /*
716 * Points to the physical bus device we'd use to do DMA
717 * Needed just in case we have virtual hosts.
718 */
719 struct device *dma_dev;
720
721 /* Delay for runtime autosuspend */
722 int rpm_autosuspend_delay;
723
724 /*
725 * We should ensure that this is aligned, both for better performance
726 * and also because some compilers (m68k) don't automatically force
727 * alignment to a long boundary.
728 */
729 unsigned long hostdata[] /* Used for storage of host specific stuff */
730 __attribute__ ((aligned (sizeof(unsigned long))));
731 };
732
733 #define class_to_shost(d) \
734 container_of(d, struct Scsi_Host, shost_dev)
735
736 #define shost_printk(prefix, shost, fmt, a...) \
737 dev_printk(prefix, &(shost)->shost_gendev, fmt, ##a)
738
shost_priv(struct Scsi_Host * shost)739 static inline void *shost_priv(struct Scsi_Host *shost)
740 {
741 return (void *)shost->hostdata;
742 }
743
744 int scsi_is_host_device(const struct device *);
745
dev_to_shost(struct device * dev)746 static inline struct Scsi_Host *dev_to_shost(struct device *dev)
747 {
748 while (!scsi_is_host_device(dev)) {
749 if (!dev->parent)
750 return NULL;
751 dev = dev->parent;
752 }
753 return container_of(dev, struct Scsi_Host, shost_gendev);
754 }
755
scsi_host_in_recovery(struct Scsi_Host * shost)756 static inline int scsi_host_in_recovery(struct Scsi_Host *shost)
757 {
758 return shost->shost_state == SHOST_RECOVERY ||
759 shost->shost_state == SHOST_CANCEL_RECOVERY ||
760 shost->shost_state == SHOST_DEL_RECOVERY ||
761 shost->tmf_in_progress;
762 }
763
764 extern int scsi_queue_work(struct Scsi_Host *, struct work_struct *);
765 extern void scsi_flush_work(struct Scsi_Host *);
766
767 extern struct Scsi_Host *scsi_host_alloc(const struct scsi_host_template *, int);
768 extern int __must_check scsi_add_host_with_dma(struct Scsi_Host *,
769 struct device *,
770 struct device *);
771 #if defined(CONFIG_SCSI_PROC_FS)
772 struct proc_dir_entry *
773 scsi_template_proc_dir(const struct scsi_host_template *sht);
774 #else
775 #define scsi_template_proc_dir(sht) NULL
776 #endif
777 extern void scsi_scan_host(struct Scsi_Host *);
778 extern int scsi_resume_device(struct scsi_device *sdev);
779 extern int scsi_rescan_device(struct scsi_device *sdev);
780 extern void scsi_remove_host(struct Scsi_Host *);
781 extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
782 extern int scsi_host_busy(struct Scsi_Host *shost);
783 extern void scsi_host_put(struct Scsi_Host *t);
784 extern struct Scsi_Host *scsi_host_lookup(unsigned int hostnum);
785 extern const char *scsi_host_state_name(enum scsi_host_state);
786 extern void scsi_host_complete_all_commands(struct Scsi_Host *shost,
787 enum scsi_host_status status);
788
scsi_add_host(struct Scsi_Host * host,struct device * dev)789 static inline int __must_check scsi_add_host(struct Scsi_Host *host,
790 struct device *dev)
791 {
792 return scsi_add_host_with_dma(host, dev, dev);
793 }
794
scsi_get_device(struct Scsi_Host * shost)795 static inline struct device *scsi_get_device(struct Scsi_Host *shost)
796 {
797 return shost->shost_gendev.parent;
798 }
799
800 /**
801 * scsi_host_scan_allowed - Is scanning of this host allowed
802 * @shost: Pointer to Scsi_Host.
803 **/
scsi_host_scan_allowed(struct Scsi_Host * shost)804 static inline int scsi_host_scan_allowed(struct Scsi_Host *shost)
805 {
806 return shost->shost_state == SHOST_RUNNING ||
807 shost->shost_state == SHOST_RECOVERY;
808 }
809
810 extern void scsi_unblock_requests(struct Scsi_Host *);
811 extern void scsi_block_requests(struct Scsi_Host *);
812 extern int scsi_host_block(struct Scsi_Host *shost);
813 extern int scsi_host_unblock(struct Scsi_Host *shost, int new_state);
814
815 void scsi_host_busy_iter(struct Scsi_Host *,
816 bool (*fn)(struct scsi_cmnd *, void *), void *priv);
817
818 struct class_container;
819
820 /*
821 * DIF defines the exchange of protection information between
822 * initiator and SBC block device.
823 *
824 * DIX defines the exchange of protection information between OS and
825 * initiator.
826 */
827 enum scsi_host_prot_capabilities {
828 SHOST_DIF_TYPE1_PROTECTION = 1 << 0, /* T10 DIF Type 1 */
829 SHOST_DIF_TYPE2_PROTECTION = 1 << 1, /* T10 DIF Type 2 */
830 SHOST_DIF_TYPE3_PROTECTION = 1 << 2, /* T10 DIF Type 3 */
831
832 SHOST_DIX_TYPE0_PROTECTION = 1 << 3, /* DIX between OS and HBA only */
833 SHOST_DIX_TYPE1_PROTECTION = 1 << 4, /* DIX with DIF Type 1 */
834 SHOST_DIX_TYPE2_PROTECTION = 1 << 5, /* DIX with DIF Type 2 */
835 SHOST_DIX_TYPE3_PROTECTION = 1 << 6, /* DIX with DIF Type 3 */
836 };
837
838 /*
839 * SCSI hosts which support the Data Integrity Extensions must
840 * indicate their capabilities by setting the prot_capabilities using
841 * this call.
842 */
scsi_host_set_prot(struct Scsi_Host * shost,unsigned int mask)843 static inline void scsi_host_set_prot(struct Scsi_Host *shost, unsigned int mask)
844 {
845 shost->prot_capabilities = mask;
846 }
847
scsi_host_get_prot(struct Scsi_Host * shost)848 static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost)
849 {
850 return shost->prot_capabilities;
851 }
852
scsi_host_prot_dma(struct Scsi_Host * shost)853 static inline int scsi_host_prot_dma(struct Scsi_Host *shost)
854 {
855 return shost->prot_capabilities >= SHOST_DIX_TYPE0_PROTECTION;
856 }
857
scsi_host_dif_capable(struct Scsi_Host * shost,unsigned int target_type)858 static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
859 {
860 static unsigned char cap[] = { 0,
861 SHOST_DIF_TYPE1_PROTECTION,
862 SHOST_DIF_TYPE2_PROTECTION,
863 SHOST_DIF_TYPE3_PROTECTION };
864
865 if (target_type >= ARRAY_SIZE(cap))
866 return 0;
867
868 return shost->prot_capabilities & cap[target_type] ? target_type : 0;
869 }
870
scsi_host_dix_capable(struct Scsi_Host * shost,unsigned int target_type)871 static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
872 {
873 #if defined(CONFIG_BLK_DEV_INTEGRITY)
874 static unsigned char cap[] = { SHOST_DIX_TYPE0_PROTECTION,
875 SHOST_DIX_TYPE1_PROTECTION,
876 SHOST_DIX_TYPE2_PROTECTION,
877 SHOST_DIX_TYPE3_PROTECTION };
878
879 if (target_type >= ARRAY_SIZE(cap))
880 return 0;
881
882 return shost->prot_capabilities & cap[target_type];
883 #endif
884 return 0;
885 }
886
887 /*
888 * All DIX-capable initiators must support the T10-mandated CRC
889 * checksum. Controllers can optionally implement the IP checksum
890 * scheme which has much lower impact on system performance. Note
891 * that the main rationale for the checksum is to match integrity
892 * metadata with data. Detecting bit errors are a job for ECC memory
893 * and buses.
894 */
895
896 enum scsi_host_guard_type {
897 SHOST_DIX_GUARD_CRC = 1 << 0,
898 SHOST_DIX_GUARD_IP = 1 << 1,
899 };
900
scsi_host_set_guard(struct Scsi_Host * shost,unsigned char type)901 static inline void scsi_host_set_guard(struct Scsi_Host *shost, unsigned char type)
902 {
903 shost->prot_guard_type = type;
904 }
905
scsi_host_get_guard(struct Scsi_Host * shost)906 static inline unsigned char scsi_host_get_guard(struct Scsi_Host *shost)
907 {
908 return shost->prot_guard_type;
909 }
910
911 extern int scsi_host_set_state(struct Scsi_Host *, enum scsi_host_state);
912
913 #endif /* _SCSI_SCSI_HOST_H */
914