/dports/lang/python311/Python-3.11.0a3/Doc/distutils/ |
H A D | builtdist.rst | 17 your module distribution: for users of RPM-based Linux systems, it's a binary 18 RPM; for Windows users, it's an executable installer; for Debian-based Linux 58 built distributions, such as an RPM package or an executable installer for 93 | ``rpm`` | RPM | \(5) | 157 Creating RPM packages 161 SuSE, and Mandrake. If one of these (or any of the other RPM-based Linux 165 to create RPMs that work on different RPM-based distributions. 167 The usual way to create an RPM of your module distribution is to run the 182 Creating RPM packages is driven by a :file:`.spec` file, much as using the 248 There are three steps to building a binary RPM package, all of which are [all …]
|
/dports/multimedia/handbrake/HandBrake-1.4.2/pkg/linux/ |
H A D | module.rules | 26 # RPM binary package rules 43 -$(MKDIR.exe) -p $(RPM.out/)SOURCES 44 -$(MKDIR.exe) -p $(RPM.out/)SPECS 45 -$(MKDIR.exe) -p $(RPM.out/)BUILD 46 -$(MKDIR.exe) -p $(RPM.out/)RPMS 47 -$(MKDIR.exe) -p $(RPM.out/)SRPMS 49 echo "%define name $(HB.name.lower)" > $(RPM.out/)SPECS/ghb.spec 50 echo "%define release $(PKG.release)" >> $(RPM.out/)SPECS/ghb.spec 52 cat $(GTK.src/)ghb.spec >> $(RPM.out/)SPECS/ghb.spec 53 $(CP.exe) $(PKG.rpm.src.tar.bz2) $(RPM.out/)SOURCES [all …]
|
/dports/sysutils/webmin/webmin-1.981/webmin/lang/ |
H A D | ko | 169 …로 <tt>.wbm</tt> 파일로 배포됩니다. 각 파일에는 하나 이상의 모듈이 포함될 수 있습니다. 운영 체제에서 지원하는 경우에는 RPM 파일로부터 모듈을 설치할 수도 있습… 238 install_erpm=Webmin 모듈 RPM이 아닙니다 239 install_eirpm=RPM을 설치하지 못했습니다: $1 241 install_eneither=RPM 에 webmin 모듈 또는 테마가 포함이 되어 있지 않습니다. 381 upgrade_descrpm=이 양식에서는 RPM의 업그레이드 옵션을 사용하여 전체 Webmin 설치를 새 버전으로 업데이트할 수 있습니다. 로컬 RPM 파일, 업로드한 파일 또… 404 upgrade_erpm=유효한 Webmin RPM 파일이 아닙니다 412 upgrade_setuprpm=Webmin 업그레이드를 위해 RPM 실행 중.. 완료될 때까지 잠시 기다리십시오. 423 upgrade_echecksig=RPM 사인 검증 실패: $1 598 …새 Webmin 테마를 설치할 수 있습니다. 테마는 일반적으로 <tt>.wbt</tt> 파일로 배포되지만, 운영 체제에서 지원할 경우에는 RPM 파일로부터 설치할 수도 있습니다. 617 themes_erpm=Webmin 테마 RPM이 아닙니다 [all …]
|
H A D | ru | 170 …й. Кроме того, если это поддерживается вашей системой, модули могут быть установлены из файлов RPM. 238 install_erpm=Это не модуль Webmin или RPM 239 install_eirpm=Не удалось установить RPM : $1 241 install_eneither=RPM не содержит модулей Webmin 381 … до новой версии с помощью системы обновления RPM. Вы можете установить локальный или загруженный … 404 upgrade_erpm=Неверный файл RPM 412 upgrade_setuprpm=Для обновления Webmin запущен RPM .. Пожалуйста, подождите пару минут, пока он зав… 423 upgrade_echecksig=Ошибка при проверке подписи RPM : $1 602 …с расширением <tt>.wbt</tt>, однако также могут быть установлены из файлов RPM (если ваша система … 626 themes_erpm=RPM не является темой Webmin [all …]
|
/dports/net-p2p/zetacoin/zetacoin-0.13.2.1/contrib/rpm/ |
H A D | README.md | 1 RPM Spec File Notes 4 The RPM spec file provided here is for Bitcoin-Core 0.12.0 and builds on CentOS 7 difficult to port the RPM spec file to most RPM based Linux distributions. 33 release, the full URL specified in the RPM spec file will not work. You can get 75 The RPM spec file will by default build the GUI client linked against the Qt5 102 matters for the `bitcoin-server` package. At this point, most RPM based 105 The files to control the service are created in the RPM spec file itself using 118 The SELinux stuff in this RPM spec file *should* be correct for CentOS, RHEL, 152 At this time, this RPM spec file does not support the ZeroMQ build options. A 158 This RPM spec file is largely based upon the work of Michael Hampton at [all …]
|
/dports/net-p2p/zetacoin-daemon/zetacoin-0.13.2.1/contrib/rpm/ |
H A D | README.md | 1 RPM Spec File Notes 4 The RPM spec file provided here is for Bitcoin-Core 0.12.0 and builds on CentOS 7 difficult to port the RPM spec file to most RPM based Linux distributions. 33 release, the full URL specified in the RPM spec file will not work. You can get 75 The RPM spec file will by default build the GUI client linked against the Qt5 102 matters for the `bitcoin-server` package. At this point, most RPM based 105 The files to control the service are created in the RPM spec file itself using 118 The SELinux stuff in this RPM spec file *should* be correct for CentOS, RHEL, 152 At this time, this RPM spec file does not support the ZeroMQ build options. A 158 This RPM spec file is largely based upon the work of Michael Hampton at [all …]
|
/dports/net-p2p/zetacoin-utils/zetacoin-0.13.2.1/contrib/rpm/ |
H A D | README.md | 1 RPM Spec File Notes 4 The RPM spec file provided here is for Bitcoin-Core 0.12.0 and builds on CentOS 7 difficult to port the RPM spec file to most RPM based Linux distributions. 33 release, the full URL specified in the RPM spec file will not work. You can get 75 The RPM spec file will by default build the GUI client linked against the Qt5 102 matters for the `bitcoin-server` package. At this point, most RPM based 105 The files to control the service are created in the RPM spec file itself using 118 The SELinux stuff in this RPM spec file *should* be correct for CentOS, RHEL, 152 At this time, this RPM spec file does not support the ZeroMQ build options. A 158 This RPM spec file is largely based upon the work of Michael Hampton at [all …]
|
/dports/multimedia/v4l_compat/linux-5.13-rc2/drivers/soc/qcom/ |
H A D | Kconfig | 26 resource on a RPM-hardened platform must use this database to get 111 tristate "Qualcomm RPM-Hardened (RPMH) Communication" 115 Support for communication with the hardened-RPM blocks in 131 tristate "Qualcomm RPM Power domain driver" 134 QCOM RPM Power domain driver to support power-domains with 136 value to RPM which then translates it into corresponding voltage 149 tristate "Qualcomm Resource Power Manager (RPM) over SMD" 158 frequencies controlled by the RPM on these devices. 160 Say M here if you want to include support for the Qualcomm RPM as a
|
/dports/multimedia/libv4l/linux-5.13-rc2/drivers/soc/qcom/ |
H A D | Kconfig | 26 resource on a RPM-hardened platform must use this database to get 111 tristate "Qualcomm RPM-Hardened (RPMH) Communication" 115 Support for communication with the hardened-RPM blocks in 131 tristate "Qualcomm RPM Power domain driver" 134 QCOM RPM Power domain driver to support power-domains with 136 value to RPM which then translates it into corresponding voltage 149 tristate "Qualcomm Resource Power Manager (RPM) over SMD" 158 frequencies controlled by the RPM on these devices. 160 Say M here if you want to include support for the Qualcomm RPM as a
|
/dports/multimedia/v4l-utils/linux-5.13-rc2/drivers/soc/qcom/ |
H A D | Kconfig | 26 resource on a RPM-hardened platform must use this database to get 111 tristate "Qualcomm RPM-Hardened (RPMH) Communication" 115 Support for communication with the hardened-RPM blocks in 131 tristate "Qualcomm RPM Power domain driver" 134 QCOM RPM Power domain driver to support power-domains with 136 value to RPM which then translates it into corresponding voltage 149 tristate "Qualcomm Resource Power Manager (RPM) over SMD" 158 frequencies controlled by the RPM on these devices. 160 Say M here if you want to include support for the Qualcomm RPM as a
|
/dports/net/freeswitch/freeswitch-1.10.3.-release/yum/ |
H A D | freeswitch-testing.repo | 8 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-FREESWITCH 17 #gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-FREESWITCH 27 #gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-FREESWITCH
|
/dports/databases/slony1v2/slony1-2.2.10/redhat/ |
H A D | slony-I.specfile | 128 - Added a buildrhel3 macro to fix RHEL 3 RPM builds 148 - Added a line to check postgresql RPM version and tag SlonyI RPM with it. 162 - More fixes on RPM builds 165 - More fixes on RPM builds 168 - Fix RPM build errors, regarding to tools/ . 180 - Fix RPM builds 183 - Initial RPM packaging
|
/dports/devel/cmake-gui/cmake-3.22.1/Help/module/ |
H A D | CPackRPM.rst | 4 The documentation for the CPack RPM generator has moved here: :cpack_gen:`CPack RPM Generator`
|
/dports/devel/cmake/cmake-3.22.1/Help/module/ |
H A D | CPackRPM.rst | 4 The documentation for the CPack RPM generator has moved here: :cpack_gen:`CPack RPM Generator`
|
/dports/devel/cmake-doc/cmake-3.22.1/Help/module/ |
H A D | CPackRPM.rst | 4 The documentation for the CPack RPM generator has moved here: :cpack_gen:`CPack RPM Generator`
|
/dports/graphics/gmt/gmt-6.3.0/doc/rst/source/supplements/spotter/ |
H A D | rotconverter.rst | 141 gmt rotconverter DC85_stages.APM + Pac_Naz_stages.RPM -N -Ft > \ 153 zones) from a model of relative plate motions PL1-PL2.RPM, assuming 158 gmt rotconverter PL1-PL2.RPM -M -Fs > PL1-PL2_half.RPM 159 gmt rotconverter - PL1-PL2.RPM -M -Fs > PL2-PL1_half.RPM 167 gmt rotconverter IND-CIB CIB-ANT ANT-AFR > India_Africa.RPM
|
/dports/math/ess/ess-18.10.2/ |
H A D | RPM.spec.in | 1 # This is an RPM spec file that specifies how to package 56 # create a README.RPM file to document any quirks of this package 57 cat > README.RPM <<EOF 58 README for %{name}-%{version}-%{release} RPM package 91 # cat %{_defaultdocdir}/%{name}-%{version}/README.RPM 99 %doc README README.RPM ANNOUNCE COPYING VERSION ChangeLog doc
|
/dports/sysutils/webmin/webmin-1.981/webmin/ |
H A D | upgrade.cgi | 218 if (open(RPM, "<$root_directory/rpm-name")) { 219 chop($rpmname = <RPM>); 220 close(RPM); 255 if (open(RPM, "<$root_directory/deb-name")) { 256 chop($debname = <RPM>); 257 close(RPM);
|
/dports/security/gringotts/gringotts-1.2.10/ |
H A D | INSTALL | 5 CVS repository image, the tarball or an RPM file. Here is how to handle 85 To build an RPM package from the tarball, simply do: 95 source RPM. After this, read on. 97 -= RPM =- 99 Finally, let's suppose you have an RPM. Gringotts behave just normally, 100 so to compile a source RPM you'll do:
|
/dports/devel/doxygen/doxygen-1.9.3/cmake/ |
H A D | packaging.cmake | 41 # Variables specific to CPack RPM generator 90 set(CPACK_GENERATOR "RPM") 94 set(CPACK_GENERATOR "RPM") 98 set(CPACK_GENERATOR "RPM") 102 set(CPACK_GENERATOR "RPM") 106 set(CPACK_GENERATOR "RPM;TGZ;STGZ")
|
/dports/net/frr7-pythontools/frr-frr-7.5.1/doc/developer/ |
H A D | packaging-redhat.rst | 11 Newer automake/autoconf/bison is only needed to build the RPM and is **not** 12 needed to install the binary RPM package. 65 7. Create RPM directory structure and populate with sources:: 98 9. Build the RPM:: 107 :file:`rpmbuild/RPMS` and the source RPM under :file:`rpmbuild/SRPMS`.
|
/dports/net/frr7/frr-frr-7.5.1/doc/developer/ |
H A D | packaging-redhat.rst | 11 Newer automake/autoconf/bison is only needed to build the RPM and is **not** 12 needed to install the binary RPM package. 65 7. Create RPM directory structure and populate with sources:: 98 9. Build the RPM:: 107 :file:`rpmbuild/RPMS` and the source RPM under :file:`rpmbuild/SRPMS`.
|
/dports/security/samhain-server/samhain-4.4.3/scripts/ |
H A D | README | 78 samhain.spec: RPM spec file for building a vanilla single-host RPM 83 This is a spec file to produce a vanilla single-host samhain RPM 91 redhat_i386.client.spec: RPM spec file for building a RedHat client RPM
|
/dports/security/samhain/samhain-4.4.3/scripts/ |
H A D | README | 78 samhain.spec: RPM spec file for building a vanilla single-host RPM 83 This is a spec file to produce a vanilla single-host samhain RPM 91 redhat_i386.client.spec: RPM spec file for building a RedHat client RPM
|
/dports/security/samhain-client/samhain-4.4.3/scripts/ |
H A D | README | 78 samhain.spec: RPM spec file for building a vanilla single-host RPM 83 This is a spec file to produce a vanilla single-host samhain RPM 91 redhat_i386.client.spec: RPM spec file for building a RedHat client RPM
|