1-- *****************************************************************
2-- Descriptions of managed objects for ADSL DMT line interfaces.
3--
4-- March 1999, Patrick Gili
5--
6-- Copyright (c) 1999 by cisco Systems, Inc.
7-- All rights reserved.
8-- *****************************************************************
9--
10-- This mib was extracted from RFC xxxx
11
12
13ADSL-DMT-LINE-MIB DEFINITIONS ::= BEGIN
14IMPORTS
15    MODULE-IDENTITY, OBJECT-TYPE    FROM SNMPv2-SMI
16    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
17    ifIndex                         FROM IF-MIB
18    adslLCSMib,
19    adslLineConfProfileName         FROM ADSL-LINE-MIB;
20
21adslLineDmtMIB MODULE-IDENTITY
22    LAST-UPDATED   "9809251000Z"
23    ORGANIZATION   "ADSL Forum"
24    CONTACT-INFO   "Kevin Godfrey
25                    Motorola Inc.
26                    Colvilles Road, East Kilbride,
27                    Glasgow, United Kingdom.
28                    Tel: +44 1355 565597
29                    Fax: +44 1355 261790
30                    E-mail: ttz864@email.sps.mot.com"
31
32    DESCRIPTION
33        "Naming Conventions:
34        Atuc -- (ATUC) modem at near (Central) end of line
35        Atur -- (ATUR) modem at Remote end of line
36        ES  -- Errored Second.
37        LCS -- Line Code Specific
38        Lof -- Loss of Frame
39        Lol -- Loss of Link
40        Los -- Loss of Signal
41        Lpr -- Loss of Power"
42    ::= { adslLCSMib 2 }
43
44adslLineDmtMIBObjects OBJECT IDENTIFIER ::= { adslLineDmtMIB 1 }
45
46-- ADSL DMT Line Table
47
48adslLineDmtTable OBJECT-TYPE
49    SYNTAX      SEQUENCE OF AdslLineDmtEntry
50    MAX-ACCESS  not-accessible
51    STATUS      current
52    DESCRIPTION
53        "This table extends the adslLineTable and contains common attributes
54        describing both ends of ADSL lines supported by the system."
55    ::= { adslLineDmtMIBObjects 1 }
56
57adslLineDmtEntry OBJECT-TYPE
58    SYNTAX      AdslLineDmtEntry
59    MAX-ACCESS  not-accessible
60    STATUS      current
61    DESCRIPTION
62        "A set of common attributes describing both ends of an ADSL line
63        supported by the system.  There exist an entry for each ifEntry with
64        an ifType of adsl(94)."
65    INDEX       { ifIndex }
66    ::= { adslLineDmtTable 1 }
67
68AdslLineDmtEntry ::= SEQUENCE {
69    adslLineDmtTrellis INTEGER,
70    adslLineDmtEOC     INTEGER
71    }
72
73adslLineDmtTrellis OBJECT-TYPE
74    SYNTAX      INTEGER {
75                    trellisOn(1),
76                    trellisOff(2)
77                }
78    MAX-ACCESS  read-only
79    STATUS      current
80    DESCRIPTION
81        "Reports whether the Trellis coding is used on the DMT
82        line. Use of trellis coding is determined at line
83        initialization with C-MSGS1 and R-MSGS1 exchanges
84        and will not change until the line is re-initialized."
85    ::= { adslLineDmtEntry 1 }
86
87adslLineDmtEOC OBJECT-TYPE
88    SYNTAX      INTEGER {
89                    unknown(1),         -- eoc mode is unknown yet
90                    transaction(2),     -- eoc only operates in original
91                                        -- transaction mode
92                    streaming(3)        -- eoc supports autonomous data
93                                        -- streaming mode and original
94                                        -- transaction mode
95                }
96    MAX-ACCESS  read-only
97    STATUS      current
98    DESCRIPTION
99        "Reports whether the eoc can support autonomous data streaming
100        mode or only transaction mode. After initialization, unknown
101        is reported until sufficient autonomous eoc messages have been
102        transmitted to determine the true capability of both ATUs."
103    ::= { adslLineDmtEntry 2 }
104
105-- ADSL ATU-C DMT Physical-Layer Parameters Table
106
107adslAtucDmtPhysTable OBJECT-TYPE
108    SYNTAX      SEQUENCE OF AdslAtucDmtPhysEntry
109    MAX-ACCESS  not-accessible
110    STATUS      current
111    DESCRIPTION
112        "This table extends the adslAtucPhysTable and contains specific
113        physical layer parameters for the ATU-C class devices supported
114        by the system."
115    ::= { adslLineDmtMIBObjects 2 }
116
117adslAtucDmtPhysEntry OBJECT-TYPE
118    SYNTAX      AdslAtucDmtPhysEntry
119    MAX-ACCESS  not-accessible
120    STATUS      current
121    DESCRIPTION
122        "A set of physical-layer parameters for an ATU-C class device
123        supported by the system.  There exists an entry for each ifEntry
124        with an ifType of adsl(94)."
125    INDEX       { ifIndex }
126    ::= { adslAtucDmtPhysTable 1 }
127
128AdslAtucDmtPhysEntry ::= SEQUENCE {
129    adslAtucDmtIssue          INTEGER,
130    adslAtucDmtState          INTEGER,
131    adslAtucDmtInterleavePath INTEGER,
132    adslAtucDmtFastPath       INTEGER
133    }
134
135adslAtucDmtIssue OBJECT-TYPE
136    SYNTAX      INTEGER {
137                    other(1),           -- unknown or other
138                    t1413Issue1(2),   	-- ANSI T1.413 Issue 1
139                    t1413Issue2(3),   	-- ANSI T1.413 Issue 2
140                    t1413Issue3(4),   	-- ANSI T1.413 Issue 3
141                    gdmtIssue1(5),     	-- ITU G.dmt Issue 1
142                    etsiIssue1(6)     	-- ETSI DMT Issue 1
143                }
144    MAX-ACCESS  read-only
145    STATUS      current
146    DESCRIPTION
147        "Reports the issue number of the relevant standard that the
148        DMT ADSL transceiver at the ATU-C is currently operating to.
149        The issue number will be fixed by the hardware and is
150        transmitted by the ATU-C in C-MSGS1 during initialization."
151    ::= { adslAtucDmtPhysEntry 1 }
152
153adslAtucDmtState  OBJECT-TYPE
154    SYNTAX      INTEGER {
155                    other(1),           -- Unknown or other state
156                    powerUp(2),         -- DMT transceiver not yet
157                                        -- configured
158                    configure(3),       -- DMT transceiver being configured
159                    idle(4),            -- transceiver is initialized but
160                                        -- idle
161                    quiet(5),           -- awaiting activation request from
162                                        -- ATU-R
163                    tone(6),            -- requesting ATU-R to be silent
164                    activating(7),      -- activation in progress
165                    training(8),        -- transceiver training in progress
166                    analyzing(9),       -- channel analysis in progress
167                    exchange(10),       -- exchanging final operating
168                                        -- parameters
169                    steadyState(11),    -- normal operating mode
170                    notResponding(12)   -- DMT transceiver not responding
171                }
172    MAX-ACCESS  read-only
173    STATUS      current
174    DESCRIPTION
175        "Reports current state of the ATU-C DMT transceiver.  The
176        current state can change dynamically.  The SNMP agent
177        reports the state after querying the ATU-C state machine."
178    ::= { adslAtucDmtPhysEntry 2 }
179
180-- Report downstream path for each DMT bearer channel used by
181-- ADSL Forum ATM and packet mode specifications. Data rates are
182-- reported in the ADSL Line MIB. DMT bearer channel paths are
183-- known to the ATU-C by observing the C-RATES1, C-RATES-RA,
184-- R-RATES1, R-RATES-RA, R-RATES2 and C-RATES2 exchanges.
185
186adslAtucDmtInterleavePath OBJECT-TYPE
187    SYNTAX      INTEGER {
188                    none(1),            -- Downstream interleave path is unused
189                    as0(2),             -- AS0 channel uses the interleaved path
190                    as1(3)              -- AS1 channel uses the interleaved path
191                }
192    MAX-ACCESS  read-only
193    STATUS      current
194    DESCRIPTION
195        "Reports bearer channel of downstream interleaved path."
196    ::= { adslAtucDmtPhysEntry 3 }
197
198adslAtucDmtFastPath OBJECT-TYPE
199    SYNTAX      INTEGER {
200                   none(1),             -- Downstream fast path is unused
201                   as0(2),              -- AS0 channel uses the fast path
202                   as1(3)               -- AS1 channel uses the fast path
203                }
204    MAX-ACCESS  read-only
205    STATUS      current
206    DESCRIPTION
207        "Reports bearer channel of downstream fast path."
208    ::= { adslAtucDmtPhysEntry 4 }
209
210-- ADSL ATU-R DMT Physical-Layer Parameters Table
211
212adslAturDmtPhysTable OBJECT-TYPE
213    SYNTAX      SEQUENCE OF AdslAturDmtPhysEntry
214    MAX-ACCESS  not-accessible
215    STATUS      current
216    DESCRIPTION
217        "This table extends the adslAturPhysTable and contains physical
218        layer parameters for the ATU-R class devices supported by the
219        system."
220    ::= { adslLineDmtMIBObjects 3 }
221
222adslAturDmtPhysEntry OBJECT-TYPE
223    SYNTAX      AdslAturDmtPhysEntry
224    MAX-ACCESS  not-accessible
225    STATUS      current
226    DESCRIPTION
227        "A set of physical-layer parameters for an ATU-R class device
228        supported by the system.  There exists an entry for each ifEntry
229        with an ifType of adsl(94)."
230    INDEX       { ifIndex }
231    ::= { adslAturDmtPhysTable 1 }
232
233AdslAturDmtPhysEntry ::= SEQUENCE {
234    adslAturDmtIssue          INTEGER,
235    adslAturDmtState          INTEGER,
236    adslAturDmtInterleavePath INTEGER,
237    adslAturDmtFastPath       INTEGER
238    }
239
240adslAturDmtIssue OBJECT-TYPE
241    SYNTAX      INTEGER {
242                    other(1),           -- unknown or other
243                    t1413Issue1(2),   	-- ANSI T1.413 Issue 1
244                    t1413Issue2(3),   	-- ANSI T1.413 Issue 2
245                    t1413Issue3(4),   	-- ANSI T1.413 Issue 3
246                    gdmtIssue1(5),     	-- ITU G.dmt Issue 1
247                    etsiIssue1(6)      	-- ETSI DMT Issue 1
248                }
249    MAX-ACCESS  read-only
250    STATUS      current
251    DESCRIPTION
252        "Reports the issue number of the relevant standard that
253         the DMT ADSL transceiver at the ATU-R is currently
254         operating to. The issue number will be fixed by the
255         hardware and is transmitted by the ATU-R
256         in R-MSGS1 during initialization."
257    ::= { adslAturDmtPhysEntry 1 }
258
259adslAturDmtState OBJECT-TYPE
260    SYNTAX      INTEGER {
261                    other(1),           -- Unknown or other state
262                    activating(2),      -- activation in progress
263                    training(3),        -- transceiver training in
264                                        -- progress
265                    analyzing(4),       -- channel analysis in progress
266                    exchange(5),        -- exchanging final operating
267                                        -- parameters
268                    steadyState(6)      -- normal operating mode
269                }
270    MAX-ACCESS  read-only
271    STATUS      current
272    DESCRIPTION
273        "Reports current state of the ATU-R DMT transceiver.
274        The current state can change dynamically. ATU-R state
275        is reported by the SNMP agent at the ATU-C which infers
276        the state depending on the ATU-C state. When the inference
277        cannot be made, unknown state is returned."
278    ::= { adslAturDmtPhysEntry 2 }
279
280-- Report upstream path for each DMT bearer channel used by
281-- ADSL Forum ATM and packet mode specifications. Data rates are
282-- reported in the ADSL Line MIB. DMT bearer channel paths are
283-- known to the ATU-R by observing the C-RATES1, C-RATES-RA,
284-- R-RATES1, R-RATES-RA, R-RATES2 and C-RATES2 exchanges.
285
286adslAturDmtInterleavePath OBJECT-TYPE
287    SYNTAX      INTEGER {
288                    none(1),            -- Upstream interleave path is unused
289                    ls0(2),             -- LS0 channel uses the interleaved path
290                    ls1(3)              -- LS1 channel uses the interleaved path
291                }
292    MAX-ACCESS  read-only
293    STATUS      current
294    DESCRIPTION
295        "Reports bearer channel of upstream interleaved path."
296    ::= { adslAturDmtPhysEntry 3 }
297
298adslAturDmtFastPath OBJECT-TYPE
299    SYNTAX      INTEGER {
300                    none(1),            -- Upstream fast path is unused
301                    ls0(2),             -- LS0 channel uses the fast path
302                    ls1(3)              -- LS1 channel uses the fast path
303                }
304    MAX-ACCESS  read-only
305    STATUS      current
306    DESCRIPTION
307        "Reports bearer channel of upstream fast path."
308    ::= { adslAturDmtPhysEntry 4 }
309
310-- ADSL ATU-C DMT Channel Parameters Table
311
312adslAtucDmtChanTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 4 }
313
314-- ADSL ATU-R DMT Channel Parameters Table
315
316adslAturDmtChanTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 5 }
317
318-- ADSL ATU-C DMT Physical-Layer Statistics Table
319
320adslAtucDmtPerfDataTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 6 }
321
322-- ADSL ATU-R DMT Physical-Layer Statistics Table
323
324adslAturDmtPerfDataTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 7 }
325
326-- ADSL ATU-C DMT Physical-Layer Statistics 15-Minute Interval Table
327
328adslAtucDmtIntervalTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 8 }
329
330-- ADSL ATU-R DMT Physical-Layer Statistics 15-Minute Interval Table
331
332adslAturDmtIntervalTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 9 }
333
334-- ADSL ATU-C DMT Channel Statistics Table
335
336adslAtucDmtChanPerfDataTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 10 }
337
338-- ADSL ATU-R DMT Channel Statistics Table
339
340adslAturDmtChanPerfDataTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 11 }
341
342-- ADSL ATU-C DMT Channel Statistics 15-Minute Interval Table
343
344adslAtucDmtChanIntervalTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 12 }
345
346-- ADSL ATU-R DMT Channel Statistics 15-Minute Interval Table
347
348adslAturDmtChanIntervalTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 13 }
349
350-- Configuration Profile Table
351
352adslLineDmtConfProfileIndexNext OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 14 }
353
354adslLineDmtConfProfileTable OBJECT-TYPE
355    SYNTAX      SEQUENCE OF AdslLineDmtConfProfileEntry
356    MAX-ACCESS  not-accessible
357    STATUS      current
358    DESCRIPTION
359        "This table extends the adslLineConfProfileTable and contains
360        ADSL DMT line configuration information."
361    ::= { adslLineDmtMIBObjects 15 }
362
363adslLineDmtConfProfileEntry OBJECT-TYPE
364    SYNTAX      AdslLineDmtConfProfileEntry
365    MAX-ACCESS  not-accessible
366    STATUS      current
367    DESCRIPTION
368        "A configuration profile containing ADSL DMT line configuration
369        information."
370    INDEX       { IMPLIED adslLineConfProfileName }
371    ::= { adslLineDmtConfProfileTable 1 }
372
373AdslLineDmtConfProfileEntry ::= SEQUENCE {
374    adslAtucDmtConfFreqBins       OCTET STRING,
375    adslAturDmtConfFreqBins       OCTET STRING,
376    adslLineDmtConfMode           INTEGER,
377    adslLineDmtConfTrellis        INTEGER,
378    adslLineDmtConfEOC            INTEGER,
379    adslAtucDmtConfInterleavePath INTEGER,
380    adslAtucDmtConfFastPath       INTEGER,
381    adslAturDmtConfInterleavePath INTEGER,
382    adslAturDmtConfFastPath       INTEGER
383}
384
385-- Configuration profiles define the starting point for line
386-- initialization. After initialization is complete, the
387-- parameters may have changed due to the negotiation and rate
388-- options process. Check the adslAtucDMTPhysTable and
389-- adslLineDMTTable for the final settings.
390
391adslAtucDmtConfFreqBins OBJECT-TYPE
392    SYNTAX      OCTET STRING (SIZE(4))
393    MAX-ACCESS  read-create
394    STATUS      current
395    DESCRIPTION
396        "A string of 32 bits to enable/disable the incoming DMT
397        frequency bins that the ATU-C receiver monitors. Each bit
398        controls one bin with the first bit of the first octet
399        controlling sub-carrier zero (lowest frequency  bin).
400        A bit set to 1 disables reception of the specified sub-
401        carrier frequency bin end a 0 enables reception."
402    DEFVAL      { '00000000'H }
403    ::= { adslLineDmtConfProfileEntry 1 }
404
405adslAturDmtConfFreqBins  OBJECT-TYPE
406    SYNTAX      OCTET STRING (SIZE(32))
407    MAX-ACCESS  read-create
408    STATUS      current
409    DESCRIPTION
410        "A string of 256 bits to enable/disable the incoming DMT frequency
411        bins that the ATU-R receiver should monitor after the next activation.
412        The mechanism to pass adslAturDMTConfFreqBins to the ATU-R is vendor
413        specific.  Each bit controls one bin with the first bit of the first
414        octet controlling sub-carrier zero (lowest frequency bin). A bit set
415        to 1 disables reception of the specified sub-carrier frequency bin end
416        a 0 enables reception."
417    DEFVAL      { '0000000000000000000000000000000000000000000000000000000000000000'H }
418    ::= { adslLineDmtConfProfileEntry 2 }
419
420adslLineDmtConfMode OBJECT-TYPE
421    SYNTAX      INTEGER {
422                    echoCancel(1),      -- DMT line operates in echo
423                                        -- cancellation mode
424                    freqDivMux(2)       -- DMT line operates in frequency
425                                        -- division multiplex mode
426                }
427    MAX-ACCESS  read-create
428    STATUS      current
429    DESCRIPTION
430        "Defines the operational mode of the DMT ADSL transceiver.
431        Configured in the C-MSG1 and C-MSG-RA exchanges."
432    ::= { adslLineDmtConfProfileEntry 3 }
433
434adslLineDmtConfTrellis OBJECT-TYPE
435    SYNTAX      INTEGER {
436                    enable(1),          -- DMT line operates with
437                                        -- Trellis coder enabled
438                    disable(2)          -- DMT line operates with
439                                        -- Trellis coder disabled
440                }
441    MAX-ACCESS  read-create
442    STATUS      current
443    DESCRIPTION
444        "Enables the Trellis coder of the DMT transceiver.  Configured
445        in the C-MSG1 and C-MSG-RA exchanges."
446    DEFVAL      { disable }
447    ::= { adslLineDmtConfProfileEntry 4 }
448
449adslLineDmtConfEOC OBJECT-TYPE
450    SYNTAX      INTEGER {
451                    byte(1),            -- eoc operates in byte
452                                        -- transaction mode
453                    streaming(2)        -- eoc allows autonomous
454                                        -- data streaming mode in
455                                        -- addition to byte
456                                        -- transaction mode
457                }
458    MAX-ACCESS  read-create
459    STATUS      current
460    DESCRIPTION
461        "Defines the embedded operations channel mode for the DMT
462         ADSL line."
463    DEFVAL      { byte }
464    ::= { adslLineDmtConfProfileEntry 5 }
465
466-- Configure upstream and downstream paths for each DMT bearer
467-- channel used by ADSL Forum ATM and packet mode specifications.
468-- DMT bearer channel paths are fixed by the ATU-C in the
469-- C-RATES1 and C-RATES-RA rate option exchanges.
470
471adslAtucDmtConfInterleavePath OBJECT-TYPE
472    SYNTAX      INTEGER {
473                    none(1),            -- No downstream interleave path
474                    as0(2),             -- Downstream interleave path operates
475                                        -- over the AS0 bearer channel
476                    as1(3)              -- Downstream interleave path operates
477                                        -- over the AS1 bearer channel
478                }
479    MAX-ACCESS  read-create
480    STATUS      current
481    DESCRIPTION
482        "Target channel for downstream interleave data path."
483    ::= { adslLineDmtConfProfileEntry 6 }
484
485adslAtucDmtConfFastPath OBJECT-TYPE
486    SYNTAX      INTEGER {
487                    none(1),            -- No downstream fast path
488                    as0(2),             -- Downstream fast path operates over
489                                        -- the AS0 bearer channel
490                    as1(3)              -- Downstream fast path operates over
491                                        -- the AS1 bearer channel
492                }
493    MAX-ACCESS  read-create
494    STATUS      current
495    DESCRIPTION
496        "Target channel for downstream fast data path."
497    ::= { adslLineDmtConfProfileEntry 7 }
498
499adslAturDmtConfInterleavePath OBJECT-TYPE
500    SYNTAX      INTEGER {
501                    none(1),            -- No upstream interleave path
502                    ls0(2),             -- Upstream interleave path operates
503                                        -- over the LS0 bearer channel
504                    ls1(3)              -- Upstream interleave path operates
505                                        -- over the LS1 bearer channel
506                }
507    MAX-ACCESS  read-create
508    STATUS      current
509    DESCRIPTION
510        "Target channel for upstream interleave data path."
511    ::= { adslLineDmtConfProfileEntry 8 }
512
513adslAturDmtConfFastPath  OBJECT-TYPE
514    SYNTAX      INTEGER {
515                    none(1),            -- No upstream fast path
516                    ls0(2),             -- Upstream fast path operates over
517                                        -- the LS0 bearer channel
518                    ls1(3)              -- Upstream fast path operates over
519                                        -- the LS1 bearer channel
520                }
521    MAX-ACCESS  read-create
522    STATUS      current
523    DESCRIPTION
524        "Target channel for upstream fast data path."
525    ::= { adslLineDmtConfProfileEntry 9 }
526
527-- Alarm Configuration Profile Table
528
529adslLineDmtAlarmConfProfileIndexNext OBJECT IDENTIFIER ::=
530    { adslLineDmtMIBObjects 16 }
531
532adslLineDmtAlarmConfProfileTable OBJECT IDENTIFIER ::=
533    { adslLineDmtMIBObjects 17 }
534
535-- MIB Notifications Definitions
536
537adslDmtLineMIBNotificationsPrefix OBJECT IDENTIFIER ::= { adslLineDmtMIB 2 }
538adslDmtLineMIBNotifications       OBJECT IDENTIFIER ::=
539    { adslDmtLineMIBNotificationsPrefix 0 }
540
541-- MIB Conformance Statements
542
543adslLineDmtMIBConformance OBJECT IDENTIFIER ::= { adslLineDmtMIB 3 }
544
545adslLineDmtMIBCompliances OBJECT IDENTIFIER ::= { adslLineDmtMIBConformance 1 }
546adslLineDmtMIBGroups      OBJECT IDENTIFIER ::= { adslLineDmtMIBConformance 2 }
547
548-- Compliance
549
550adslDMTLineMibCompliance MODULE-COMPLIANCE
551    STATUS current
552    DESCRIPTION
553        "The compliance statement for SNMP entities which have ADSL DMT
554        interfaces."
555
556    MODULE -- this module
557        MANDATORY-GROUPS {
558            adslLineDmtGroup,
559            adslAtucDmtPhysGroup,
560            adslAturDmtPhysGroup,
561            adslLineDmtConfProfileGroup
562        }
563    ::= { adslLineDmtMIBCompliances 1 }
564
565adslLineDmtMIBAturCompliance MODULE-COMPLIANCE
566    STATUS current
567    DESCRIPTION
568        "The compliance statement for SNMP entities which manage ADSL DMT
569        ATU-R interfaces."
570
571    MODULE -- this module
572        MANDATORY-GROUPS {
573            adslLineDmtGroup,
574            adslAturDmtPhysGroup,
575            adslLineDmtConfProfileGroup
576        }
577    ::= { adslLineDmtMIBCompliances 2 }
578
579-- Units of Conformance
580
581adslLineDmtGroup OBJECT-GROUP
582    OBJECTS {
583        adslLineDmtTrellis,
584        adslLineDmtEOC
585        }
586    STATUS current
587    DESCRIPTION
588        "A collection of managed objects defining the attributes of an ADSL
589        line supportings modems using the DMT line code."
590    ::= { adslLineDmtMIBGroups 1 }
591
592adslAtucDmtPhysGroup OBJECT-GROUP
593    OBJECTS {
594        adslAtucDmtIssue,
595        adslAtucDmtState,
596        adslAtucDmtInterleavePath,
597        adslAtucDmtFastPath
598        }
599    STATUS current
600    DESCRIPTION
601        "A collection of managed objects defining the physical-layer
602        parameters of an ATU-C using the DMT line code."
603    ::= { adslLineDmtMIBGroups 2 }
604
605adslAturDmtPhysGroup OBJECT-GROUP
606    OBJECTS {
607        adslAturDmtIssue,
608        adslAturDmtState,
609        adslAturDmtInterleavePath,
610        adslAturDmtFastPath
611        }
612    STATUS current
613    DESCRIPTION
614        "A collection of managed objects defining the physical-layer
615        parameters of an ATU-R using the DMT line code."
616    ::= { adslLineDmtMIBGroups 3 }
617
618adslLineDmtConfProfileGroup OBJECT-GROUP
619    OBJECTS {
620        adslAtucDmtConfFreqBins,
621        adslAturDmtConfFreqBins,
622        adslLineDmtConfMode,
623        adslLineDmtConfTrellis,
624        adslLineDmtConfEOC,
625        adslAtucDmtConfInterleavePath,
626        adslAtucDmtConfFastPath,
627        adslAturDmtConfInterleavePath,
628        adslAturDmtConfFastPath
629        }
630    STATUS current
631    DESCRIPTION
632        "A collection of managed objects defining the line configuration
633        information associated with one or more ADSL ATU class devices
634	implementing the DMT line code."
635    ::= { adslLineDmtMIBGroups 4 }
636
637END
638