1 /** @file 2 Definitions related to IPSEC_CONFIG_PROTOCOL implementations. 3 4 Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR> 5 6 This program and the accompanying materials 7 are licensed and made available under the terms and conditions of the BSD License 8 which accompanies this distribution. The full text of the license may be found at 9 http://opensource.org/licenses/bsd-license.php. 10 11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 13 14 **/ 15 16 #ifndef _IPSEC_CONFIG_IMPL_H_ 17 #define _IPSEC_CONFIG_IMPL_H_ 18 19 #include <Protocol/IpSec.h> 20 #include <Protocol/IpSecConfig.h> 21 22 #include <Library/BaseLib.h> 23 #include <Library/BaseMemoryLib.h> 24 #include <Library/PrintLib.h> 25 #include <Library/MemoryAllocationLib.h> 26 #include <Library/UefiRuntimeServicesTableLib.h> 27 #include <Library/UefiBootServicesTableLib.h> 28 #include <Library/DebugLib.h> 29 30 #include "IpSecImpl.h" 31 32 #define EFI_IPSEC_ANY_PROTOCOL 0xFFFF 33 #define EFI_IPSEC_ANY_PORT 0 34 35 #define IPSEC_VAR_ITEM_HEADER_LOGO_BIT 0x80 36 #define IPSEC_VAR_ITEM_HEADER_CONTENT_BIT 0x7F 37 38 #define IPSECCONFIG_VARIABLE_NAME L"IpSecConfig" 39 #define IPSECCONFIG_STATUS_NAME L"IpSecStatus" 40 41 #define SIZE_OF_SPD_SELECTOR(x) (UINTN) (sizeof (EFI_IPSEC_SPD_SELECTOR) \ 42 + sizeof (EFI_IP_ADDRESS_INFO) * ((x)->LocalAddressCount + (x)->RemoteAddressCount)) 43 44 #define FIX_REF_BUF_ADDR(addr, base) addr = (VOID *) ((UINTN) (addr) - (UINTN) (base)) 45 #define UNFIX_REF_BUF_ADDR(addr, base) addr = (VOID *) ((UINTN) (addr) + (UINTN) (base)) 46 47 // 48 // The data structure used to store the genernall information of IPsec configuration. 49 // 50 typedef struct { 51 UINT32 VariableCount; // the total number of the IPsecConfig variables. 52 UINT32 VariableSize; // The total size of all IpsecConfig variables. 53 UINT32 SingleVariableSize; // The max size of single variable 54 } IP_SEC_VARIABLE_INFO; 55 56 typedef struct { 57 EFI_IPSEC_CONFIG_SELECTOR *Selector; 58 VOID *Data; 59 LIST_ENTRY List; 60 } IPSEC_COMMON_POLICY_ENTRY; 61 62 typedef struct { 63 UINT8 *Ptr; 64 UINTN Size; 65 UINTN Capacity; 66 } IPSEC_VARIABLE_BUFFER; 67 68 #pragma pack(1) 69 typedef struct { 70 UINT8 Type; 71 UINT16 Size; 72 } IPSEC_VAR_ITEM_HEADER; 73 #pragma pack() 74 75 /** 76 The prototype of Copy Source Selector to the Destination Selector. 77 78 @param[in, out] DstSel Pointer of Destination Selector. It would be 79 SPD Selector, or SAD Selector or PAD Selector. 80 @param[in] SrcSel Pointer of Source Selector. It would be 81 SPD Selector, or SAD Selector or PAD Selector. 82 @param[in, out] Size The size of the Destination Selector. If it 83 is not NULL and its value is less than the size of 84 Source Selector, the value of Source Selector's 85 size will be passed to the caller by this parameter. 86 87 @retval EFI_INVALID_PARAMETER If the Destination or Source Selector is NULL. 88 @retval EFI_BUFFER_TOO_SMALL If the input Size is less than size of Source Selector. 89 @retval EFI_SUCCESS Copy Source Selector to the Destination 90 Selector successfully. 91 92 **/ 93 typedef 94 EFI_STATUS 95 (*IPSEC_DUPLICATE_SELECTOR) ( 96 IN OUT EFI_IPSEC_CONFIG_SELECTOR *DstSel, 97 IN EFI_IPSEC_CONFIG_SELECTOR *SrcSel, 98 IN OUT UINTN *Size 99 ); 100 101 /** 102 It is prototype of compare two Selectors. The Selector would be SPD Selector, 103 or SAD Selector, or PAD selector. 104 105 @param[in] Selector1 Pointer of the first Selector. 106 @param[in] Selector2 Pointer of the second Selector. 107 108 @retval TRUE These two Selectors have the same value in certain fields. 109 @retval FALSE Not all fields have the same value in these two Selectors. 110 111 **/ 112 typedef 113 BOOLEAN 114 (*IPSEC_COMPARE_SELECTOR) ( 115 IN EFI_IPSEC_CONFIG_SELECTOR *Selector1, 116 IN EFI_IPSEC_CONFIG_SELECTOR *Selector2 117 ); 118 119 /** 120 The prototype of a function to check if the Selector is Zero by its certain fields. 121 122 @param[in] Selector Pointer of the Selector. 123 124 @retval TRUE If the Selector is Zero. 125 @retval FALSE If the Selector is not Zero. 126 127 **/ 128 typedef 129 BOOLEAN 130 (*IPSEC_IS_ZERO_SELECTOR) ( 131 IN EFI_IPSEC_CONFIG_SELECTOR *Selector 132 ); 133 134 /** 135 The prototype of a function to fix the value of particular members of the Selector. 136 137 @param[in] Selector Pointer of Selector. 138 @param[in] Data Pointer of Data. 139 140 **/ 141 typedef 142 VOID 143 (*IPSEC_FIX_POLICY_ENTRY) ( 144 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 145 IN VOID *Data 146 ); 147 148 /** 149 It is prototype function to define a routine function by the caller of IpSecVisitConfigData(). 150 151 @param[in] Type A specified IPSEC_CONFIG_DATA_TYPE. 152 @param[in] Selector Points to EFI_IPSEC_CONFIG_SELECTOR to be copied 153 to the buffer. 154 @param[in] Data Points to data to be copied to the buffer. The 155 Data type is related to the Type. 156 @param[in] SelectorSize The size of the Selector. 157 @param[in] DataSize The size of the Data. 158 @param[in, out] Buffer The buffer to store the Selector and Data. 159 160 @retval EFI_SUCCESS Copied the Selector and Data to a buffer successfully. 161 @retval EFI_OUT_OF_RESOURCES The required system resource could not be allocated. 162 163 **/ 164 typedef 165 EFI_STATUS 166 (*IPSEC_COPY_POLICY_ENTRY) ( 167 IN EFI_IPSEC_CONFIG_DATA_TYPE Type, 168 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 169 IN VOID *Data, 170 IN UINTN SelectorSize, 171 IN UINTN DataSize, 172 IN OUT VOID *Context 173 ); 174 175 /** 176 Set the security policy information for the EFI IPsec driver. 177 178 The IPsec configuration data has a unique selector/identifier separately to 179 identify a data entry. 180 181 @param[in] Selector Pointer to an entry selector on operated 182 configuration data specified by DataType. 183 A NULL Selector causes the entire specified-type 184 configuration information to be flushed. 185 @param[in] Data The data buffer to be set. 186 @param[in] Context Pointer to one entry selector that describes 187 the expected position the new data entry will 188 be added. If Context is NULL, the new entry will 189 be appended to the end of the database. 190 191 @retval EFI_INVALID_PARAMETER Certain Parameters are not correct. The Parameter 192 requiring a check depends on the Selector type. 193 @retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated. 194 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 195 196 **/ 197 typedef 198 EFI_STATUS 199 (*IPSEC_SET_POLICY_ENTRY) ( 200 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 201 IN VOID *Data, 202 IN VOID *Context OPTIONAL 203 ); 204 205 /** 206 A prototype function definition to lookup the data entry from IPsec. Return the configuration 207 value of the specified Entry. 208 209 @param[in] Selector Pointer to an entry selector that is an identifier 210 of the entry. 211 @param[in, out] DataSize On output, the size of data returned in Data. 212 @param[out] Data The buffer to return the contents of the IPsec 213 configuration data. The type of the data buffer 214 is associated with the DataType. 215 216 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 217 @retval EFI_INVALID_PARAMETER Data is NULL and *DataSize is not zero. 218 @retval EFI_NOT_FOUND The configuration data specified by Selector is not found. 219 @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been 220 updated with the size needed to complete the request. 221 222 **/ 223 typedef 224 EFI_STATUS 225 (*IPSEC_GET_POLICY_ENTRY) ( 226 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 227 IN OUT UINTN *DataSize, 228 IN VOID *Data 229 ); 230 231 /** 232 Compare two SPD Selectors. 233 234 Compare two SPD Selector by the fields of LocalAddressCount/RemoteAddressCount/ 235 NextLayerProtocol/LocalPort/LocalPortRange/RemotePort/RemotePortRange and the 236 Local Addresses and remote Addresses. 237 238 @param[in] Selector1 Pointer of the first SPD Selector. 239 @param[in] Selector2 Pointer of the second SPD Selector. 240 241 @retval TRUE These two Selectors have the same value in above fields. 242 @retval FALSE Not all of the above fields have the same value in these two Selectors. 243 244 **/ 245 BOOLEAN 246 CompareSpdSelector ( 247 IN EFI_IPSEC_CONFIG_SELECTOR *Selector1, 248 IN EFI_IPSEC_CONFIG_SELECTOR *Selector2 249 ); 250 251 252 /** 253 Visit all IPsec Configurations of specified Type and call the caller defined 254 interface. 255 256 @param[in] DataType The specified IPsec Config Data Type. 257 @param[in] Routine The function caller defined. 258 @param[in] Context The data passed to the Routine. 259 260 @retval EFI_OUT_OF_RESOURCES The required system resource could not be allocated. 261 @retval EFI_SUCCESS This function complete successfully. 262 263 **/ 264 EFI_STATUS 265 IpSecVisitConfigData ( 266 IN EFI_IPSEC_CONFIG_DATA_TYPE DataType, 267 IN IPSEC_COPY_POLICY_ENTRY Routine, 268 IN VOID *Context 269 ); 270 271 272 /** 273 This function is the subfunction of the EFIIpSecConfigSetData. 274 275 This function call IpSecSetVaraible to set the IPsec Configuration into the firmware. 276 277 @retval EFI_OUT_OF_RESOURCES The required system resource could not be allocated. 278 @retval EFI_SUCCESS Saved the configration successfully. 279 @retval Others Other errors were found while obtaining the variable. 280 281 **/ 282 EFI_STATUS 283 IpSecConfigSave ( 284 VOID 285 ); 286 287 /** 288 Initialize IPsecConfig protocol 289 290 @param[in, out] Private Pointer to IPSEC_PRIVATE_DATA. After this function finish, 291 the pointer of IPsecConfig Protocol implementation will copy 292 into its IPsecConfig member. 293 294 @retval EFI_SUCCESS Initialized the IPsecConfig Protocol successfully. 295 @retval Others Initializing the IPsecConfig Protocol failed. 296 297 **/ 298 EFI_STATUS 299 IpSecConfigInitialize ( 300 IN OUT IPSEC_PRIVATE_DATA *Private 301 ); 302 303 /** 304 Calculate the entire size of EFI_IPSEC_SPD_DATA, which includes the buffer size pointed 305 by the pointer members. 306 307 @param[in] SpdData Pointer to a specified EFI_IPSEC_SPD_DATA. 308 309 @return The entire size of the specified EFI_IPSEC_SPD_DATA. 310 311 **/ 312 UINTN 313 IpSecGetSizeOfEfiSpdData ( 314 IN EFI_IPSEC_SPD_DATA *SpdData 315 ); 316 317 /** 318 Calculate the a entire size of IPSEC_SPD_DATA, which includes the buffer size pointed 319 by the pointer members and the buffer size used by Sa List. 320 321 @param[in] SpdData Pointer to the specified IPSEC_SPD_DATA. 322 323 @return The entire size of IPSEC_SPD_DATA. 324 325 **/ 326 UINTN 327 IpSecGetSizeOfSpdData ( 328 IN IPSEC_SPD_DATA *SpdData 329 ); 330 331 /** 332 Copy Source Process Policy to the Destination Process Policy. 333 334 @param[in] Dst Pointer to the Source Process Policy. 335 @param[in] Src Pointer to the Destination Process Policy. 336 337 **/ 338 VOID 339 IpSecDuplicateProcessPolicy ( 340 IN EFI_IPSEC_PROCESS_POLICY *Dst, 341 IN EFI_IPSEC_PROCESS_POLICY *Src 342 ); 343 344 /** 345 Find if the two SPD Selectors has subordinative. 346 347 Compare two SPD Selector by the fields of LocalAddressCount/RemoteAddressCount/ 348 NextLayerProtocol/LocalPort/LocalPortRange/RemotePort/RemotePortRange and the 349 Local Addresses and remote Addresses. 350 351 @param[in] Selector1 Pointer of first SPD Selector. 352 @param[in] Selector2 Pointer of second SPD Selector. 353 354 @retval TRUE The first SPD Selector is subordinate Selector of second SPD Selector. 355 @retval FALSE The first SPD Selector is not subordinate Selector of second 356 SPD Selector. 357 358 **/ 359 BOOLEAN 360 IsSubSpdSelector ( 361 IN EFI_IPSEC_CONFIG_SELECTOR *Selector1, 362 IN EFI_IPSEC_CONFIG_SELECTOR *Selector2 363 ); 364 365 /** 366 Compare two SA IDs. 367 368 @param[in] Selector1 Pointer of the first SA ID. 369 @param[in] Selector2 Pointer of the second SA ID. 370 371 @retval TRUE This two Selectors have the same SA ID. 372 @retval FALSE This two Selecotrs don't have the same SA ID. 373 374 **/ 375 BOOLEAN 376 CompareSaId ( 377 IN EFI_IPSEC_CONFIG_SELECTOR *Selector1, 378 IN EFI_IPSEC_CONFIG_SELECTOR *Selector2 379 ); 380 381 /** 382 Compare two PAD IDs. 383 384 @param[in] Selector1 Pointer of the first PAD ID. 385 @param[in] Selector2 Pointer of the second PAD ID. 386 387 @retval TRUE This two Selectors have the same PAD ID. 388 @retval FALSE This two Selecotrs don't have the same PAD ID. 389 390 **/ 391 BOOLEAN 392 ComparePadId ( 393 IN EFI_IPSEC_CONFIG_SELECTOR *Selector1, 394 IN EFI_IPSEC_CONFIG_SELECTOR *Selector2 395 ); 396 397 /** 398 Check if the SPD Selector is Zero by its LocalAddressCount and RemoteAddressCount 399 fields. 400 401 @param[in] Selector Pointer of the SPD Selector. 402 403 @retval TRUE If the SPD Selector is Zero. 404 @retval FALSE If the SPD Selector is not Zero. 405 406 **/ 407 BOOLEAN 408 IsZeroSpdSelector ( 409 IN EFI_IPSEC_CONFIG_SELECTOR *Selector 410 ); 411 412 /** 413 Check if the SA ID is Zero by its DestAddress. 414 415 @param[in] Selector Pointer of the SA ID. 416 417 @retval TRUE If the SA ID is Zero. 418 @retval FALSE If the SA ID is not Zero. 419 420 **/ 421 BOOLEAN 422 IsZeroSaId ( 423 IN EFI_IPSEC_CONFIG_SELECTOR *Selector 424 ); 425 426 /** 427 Check if the PAD ID is Zero. 428 429 @param[in] Selector Pointer of the PAD ID. 430 431 @retval TRUE If the PAD ID is Zero. 432 @retval FALSE If the PAD ID is not Zero. 433 434 **/ 435 BOOLEAN 436 IsZeroPadId ( 437 IN EFI_IPSEC_CONFIG_SELECTOR *Selector 438 ); 439 440 /** 441 Copy Source SPD Selector to the Destination SPD Selector. 442 443 @param[in, out] DstSel Pointer of Destination SPD Selector. 444 @param[in] SrcSel Pointer of Source SPD Selector. 445 @param[in, out] Size The size of the Destination SPD Selector. If 446 it is not NULL and its value is less than the 447 size of Source SPD Selector, the value of 448 Source SPD Selector's size will be passed to 449 the caller by this parameter. 450 451 @retval EFI_INVALID_PARAMETER If the Destination or Source SPD Selector is NULL. 452 @retval EFI_BUFFER_TOO_SMALL If the input Size is less than size of Source SPD Selector. 453 @retval EFI_SUCCESS Copy Source SPD Selector to the Destination SPD 454 Selector successfully. 455 456 **/ 457 EFI_STATUS 458 DuplicateSpdSelector ( 459 IN OUT EFI_IPSEC_CONFIG_SELECTOR *DstSel, 460 IN EFI_IPSEC_CONFIG_SELECTOR *SrcSel, 461 IN OUT UINTN *Size 462 ); 463 464 /** 465 Copy Source SA ID to the Destination SA ID. 466 467 @param[in, out] DstSel Pointer of the Destination SA ID. 468 @param[in] SrcSel Pointer of the Source SA ID. 469 @param[in, out] Size The size of the Destination SA ID. If it 470 not NULL, and its value is less than the size of 471 Source SA ID, the value of Source SA ID's size 472 will be passed to the caller by this parameter. 473 474 @retval EFI_INVALID_PARAMETER If the Destination or Source SA ID is NULL. 475 @retval EFI_BUFFER_TOO_SMALL If the input Size less than size of source SA ID. 476 @retval EFI_SUCCESS Copied Source SA ID to the Destination SA ID successfully. 477 478 **/ 479 EFI_STATUS 480 DuplicateSaId ( 481 IN OUT EFI_IPSEC_CONFIG_SELECTOR *DstSel, 482 IN EFI_IPSEC_CONFIG_SELECTOR *SrcSel, 483 IN OUT UINTN *Size 484 ); 485 486 /** 487 Copy Source PAD ID to the Destination PAD ID. 488 489 @param[in, out] DstSel Pointer of Destination PAD ID. 490 @param[in] SrcSel Pointer of Source PAD ID. 491 @param[in, out] Size The size of the Destination PAD ID. If it 492 not NULL, and its value less than the size of 493 Source PAD ID, the value of Source PAD ID's size 494 will be passed to the caller by this parameter. 495 496 @retval EFI_INVALID_PARAMETER If the Destination or Source PAD ID is NULL. 497 @retval EFI_BUFFER_TOO_SMALL If the input Size less than size of source PAD ID. 498 @retval EFI_SUCCESS Copied Source PAD ID to the Destination PAD ID successfully. 499 500 **/ 501 EFI_STATUS 502 DuplicatePadId ( 503 IN OUT EFI_IPSEC_CONFIG_SELECTOR *DstSel, 504 IN EFI_IPSEC_CONFIG_SELECTOR *SrcSel, 505 IN OUT UINTN *Size 506 ); 507 508 /** 509 Fix the value of some members of the SPD Selector. 510 511 This function is called by IpSecCopyPolicyEntry(), which copies the Policy 512 Entry into the Variable. Since some members in SPD Selector are pointers, 513 a physical address to relative address conversion is required before copying 514 this SPD entry into the variable. 515 516 @param[in] Selector Pointer of SPD Selector. 517 @param[in, out] Data Pointer of SPD Data. 518 519 **/ 520 VOID 521 FixSpdEntry ( 522 IN EFI_IPSEC_SPD_SELECTOR *Selector, 523 IN OUT EFI_IPSEC_SPD_DATA *Data 524 ); 525 526 /** 527 Fix the value of some members of SA ID. 528 529 This function is called by IpSecCopyPolicyEntry(), which copies the Policy 530 Entry into the Variable. Since some members in SA ID are pointers, 531 a physical address to relative address conversion is required before copying 532 this SAD into the variable. 533 534 @param[in] SaId Pointer of SA ID. 535 @param[in, out] Data Pointer of SA Data. 536 537 **/ 538 VOID 539 FixSadEntry ( 540 IN EFI_IPSEC_SA_ID *SaId, 541 IN OUT EFI_IPSEC_SA_DATA2 *Data 542 ); 543 544 /** 545 Fix the value of some members of PAD ID. 546 547 This function is called by IpSecCopyPolicyEntry(), which copy the Policy 548 Entry into the Variable. Since some members in PAD ID are pointers, 549 a physical address to relative address conversion is required before copying 550 this PAD into the variable. 551 552 @param[in] PadId Pointer of PAD ID. 553 @param[in, out] Data Pointer of PAD Data. 554 555 **/ 556 VOID 557 FixPadEntry ( 558 IN EFI_IPSEC_PAD_ID *PadId, 559 IN OUT EFI_IPSEC_PAD_DATA *Data 560 ); 561 562 /** 563 Recover the value of some members of SPD Selector. 564 565 This function is corresponding to FixSpdEntry(). It recovers the value of members 566 of SPD Selector which fix by the FixSpdEntry(). 567 568 @param[in, out] Selector Pointer of SPD Selector. 569 @param[in, out] Data Pointer of SPD Data. 570 571 **/ 572 VOID 573 UnfixSpdEntry ( 574 IN OUT EFI_IPSEC_SPD_SELECTOR *Selector, 575 IN OUT EFI_IPSEC_SPD_DATA *Data 576 ); 577 578 579 /** 580 Recover the value of some members of SA ID. 581 582 This function is corresponding to FixSadEntry(). It recovers the value of members 583 of SAD ID which fix by the FixSadEntry(). 584 585 @param[in, out] SaId Pointer of SAD ID 586 @param[in, out] Data Pointer of SAD Data. 587 588 **/ 589 VOID 590 UnfixSadEntry ( 591 IN OUT EFI_IPSEC_SA_ID *SaId, 592 IN OUT EFI_IPSEC_SA_DATA2 *Data 593 ); 594 595 /** 596 Recover the value of some members of PAD ID. 597 598 This function is corresponding to FixPadEntry(). It recovers the value of members 599 of PAD ID which fix by the FixPadEntry(). 600 601 @param[in] PadId Pointer of PAD ID 602 @param[in, out] Data Pointer of PAD Data. 603 604 **/ 605 VOID 606 UnfixPadEntry ( 607 IN EFI_IPSEC_PAD_ID *PadId, 608 IN OUT EFI_IPSEC_PAD_DATA *Data 609 ); 610 611 /** 612 Set the security policy information for the EFI IPsec driver. 613 614 The IPsec configuration data has a unique selector/identifier separately to 615 identify a data entry. 616 617 @param[in] Selector Pointer to an entry selector on operated 618 configuration data specified by DataType. 619 A NULL Selector causes the entire specified-type 620 configuration information to be flushed. 621 @param[in] Data The data buffer to be set. The structure 622 of the data buffer should be EFI_IPSEC_SPD_DATA. 623 @param[in] Context Pointer to one entry selector that describes 624 the expected position the new data entry will 625 be added. If Context is NULL,the new entry will 626 be appended the end of database. 627 628 @retval EFI_INVALID_PARAMETER One or more of the following are TRUE: 629 - Selector is not NULL and its LocalAddress 630 is NULL or its RemoteAddress is NULL. 631 - Data is not NULL, its Action is Protected, 632 and its policy is NULL. 633 - Data is not NULL and its Action is not protected 634 and its policy is not NULL. 635 - The Action of Data is Protected, its policy 636 mode is Tunnel, and its tunnel option is NULL. 637 - The Action of Data is protected, its policy 638 mode is not Tunnel, and it tunnel option is not NULL. 639 @retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated. 640 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 641 642 **/ 643 EFI_STATUS 644 SetSpdEntry ( 645 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 646 IN VOID *Data, 647 IN VOID *Context OPTIONAL 648 ); 649 650 /** 651 Set the security association information for the EFI IPsec driver. 652 653 The IPsec configuration data has a unique selector/identifier separately to 654 identify a data entry. 655 656 @param[in] Selector Pointer to an entry selector on operated 657 configuration data specified by DataType. 658 A NULL Selector causes the entire specified-type 659 configuration information to be flushed. 660 @param[in] Data The data buffer to be set. The structure 661 of the data buffer should be EFI_IPSEC_SA_DATA. 662 @param[in] Context Pointer to one entry selector which describes 663 the expected position the new data entry will 664 be added. If Context is NULL,the new entry will 665 be appended to the end of database. 666 667 @retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated. 668 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 669 670 **/ 671 EFI_STATUS 672 SetSadEntry ( 673 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 674 IN VOID *Data, 675 IN VOID *Context OPTIONAL 676 ); 677 678 /** 679 Set the peer authorization configuration information for the EFI IPsec driver. 680 681 The IPsec configuration data has a unique selector/identifier separately to 682 identify a data entry. 683 684 @param[in] Selector Pointer to an entry selector on operated 685 configuration data specified by DataType. 686 A NULL Selector causes the entire specified-type 687 configuration information to be flushed. 688 @param[in] Data The data buffer to be set. The structure 689 of the data buffer should be EFI_IPSEC_PAD_DATA. 690 @param[in] Context Pointer to one entry selector that describes 691 the expected position where the new data entry will 692 be added. If Context is NULL, the new entry will 693 be appended the end of database. 694 695 @retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated. 696 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 697 698 **/ 699 EFI_STATUS 700 SetPadEntry ( 701 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 702 IN VOID *Data, 703 IN VOID *Context OPTIONAL 704 ); 705 706 /** 707 This function looks up the data entry from IPsec SPD, and returns the configuration 708 value of the specified SPD Entry. 709 710 @param[in] Selector Pointer to an entry selector which is an identifier 711 of the SPD entry. 712 @param[in, out] DataSize On output the size of data returned in Data. 713 @param[out] Data The buffer to return the contents of the IPsec 714 configuration data. The type of the data buffer 715 is associated with the DataType. 716 717 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 718 @retval EFI_INVALID_PARAMETER Data is NULL and *DataSize is not zero. 719 @retval EFI_NOT_FOUND The configuration data specified by Selector is not found. 720 @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been 721 updated with the size needed to complete the request. 722 723 **/ 724 EFI_STATUS 725 GetSpdEntry ( 726 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 727 IN OUT UINTN *DataSize, 728 OUT VOID *Data 729 ); 730 731 /** 732 This function looks up the data entry from IPsec SAD and returns the configuration 733 value of the specified SAD Entry. 734 735 @param[in] Selector Pointer to an entry selector that is an identifier 736 of the SAD entry. 737 @param[in, out] DataSize On output, the size of data returned in Data. 738 @param[out] Data The buffer to return the contents of the IPsec 739 configuration data. This type of the data buffer 740 is associated with the DataType. 741 742 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 743 @retval EFI_NOT_FOUND The configuration data specified by Selector is not found. 744 @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been 745 updated with the size needed to complete the request. 746 747 **/ 748 EFI_STATUS 749 GetSadEntry ( 750 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 751 IN OUT UINTN *DataSize, 752 OUT VOID *Data 753 ); 754 755 /** 756 This function looks up the data entry from IPsec PADand returns the configuration 757 value of the specified PAD Entry. 758 759 @param[in] Selector Pointer to an entry selector that is an identifier 760 of the PAD entry. 761 @param[in, out] DataSize On output the size of data returned in Data. 762 @param[out] Data The buffer to return the contents of the IPsec 763 configuration data. This type of the data buffer 764 is associated with the DataType. 765 766 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 767 @retval EFI_NOT_FOUND The configuration data specified by Selector is not found. 768 @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been 769 updated with the size needed to complete the request. 770 771 **/ 772 EFI_STATUS 773 GetPadEntry ( 774 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 775 IN OUT UINTN *DataSize, 776 OUT VOID *Data 777 ); 778 779 /** 780 Return the configuration value for the EFI IPsec driver. 781 782 This function lookup the data entry from IPsec database or IKEv2 configuration 783 information. The expected data type and unique identification are described in 784 DataType and Selector parameters. 785 786 @param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance. 787 @param[in] DataType The type of data to retrieve. 788 @param[in] Selector Pointer to an entry selector that is an identifier of the IPsec 789 configuration data entry. 790 @param[in, out] DataSize On output the size of data returned in Data. 791 @param[out] Data The buffer to return the contents of the IPsec configuration data. 792 The type of the data buffer is associated with the DataType. 793 794 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 795 @retval EFI_INVALID_PARAMETER One or more of the followings are TRUE: 796 - This is NULL. 797 - Selector is NULL. 798 - DataSize is NULL. 799 - Data is NULL and *DataSize is not zero 800 @retval EFI_NOT_FOUND The configuration data specified by Selector is not found. 801 @retval EFI_UNSUPPORTED The specified DataType is not supported. 802 @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been 803 updated with the size needed to complete the request. 804 805 **/ 806 EFI_STATUS 807 EFIAPI 808 EfiIpSecConfigGetData ( 809 IN EFI_IPSEC_CONFIG_PROTOCOL *This, 810 IN EFI_IPSEC_CONFIG_DATA_TYPE DataType, 811 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 812 IN OUT UINTN *DataSize, 813 OUT VOID *Data 814 ); 815 816 /** 817 Set the security association, security policy and peer authorization configuration 818 information for the EFI IPsec driver. 819 820 This function is used to set the IPsec configuration information of type DataType for 821 the EFI IPsec driver. 822 The IPsec configuration data has a unique selector/identifier separately to identify 823 a data entry. The selector structure depends on DataType's definition. 824 Using SetData() with a Data of NULL causes the IPsec configuration data entry identified 825 by DataType and Selector to be deleted. 826 827 @param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance. 828 @param[in] DataType The type of data to be set. 829 @param[in] Selector Pointer to an entry selector on operated configuration data 830 specified by DataType. A NULL Selector causes the entire 831 specified-type configuration information to be flushed. 832 @param[in] Data The data buffer to be set. The structure of the data buffer is 833 associated with the DataType. 834 @param[in] InsertBefore Pointer to one entry selector which describes the expected 835 position the new data entry will be added. If InsertBefore is NULL, 836 the new entry will be appended the end of database. 837 838 @retval EFI_SUCCESS The specified configuration entry data was set successfully. 839 @retval EFI_INVALID_PARAMETER One or more of the following are TRUE: 840 - This is NULL. 841 @retval EFI_UNSUPPORTED The specified DataType is not supported. 842 @retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated. 843 844 **/ 845 EFI_STATUS 846 EFIAPI 847 EfiIpSecConfigSetData ( 848 IN EFI_IPSEC_CONFIG_PROTOCOL *This, 849 IN EFI_IPSEC_CONFIG_DATA_TYPE DataType, 850 IN EFI_IPSEC_CONFIG_SELECTOR *Selector, 851 IN VOID *Data, 852 IN EFI_IPSEC_CONFIG_SELECTOR *InsertBefore OPTIONAL 853 ); 854 855 /** 856 Enumerates the current selector for IPsec configuration data entry. 857 858 This function is called multiple times to retrieve the entry Selector in IPsec 859 configuration database. On each call to GetNextSelector(), the next entry 860 Selector are retrieved into the output interface. 861 862 If the entire IPsec configuration database has been iterated, the error 863 EFI_NOT_FOUND is returned. 864 If the Selector buffer is too small for the next Selector copy, an 865 EFI_BUFFER_TOO_SMALL error is returned, and SelectorSize is updated to reflect 866 the size of buffer needed. 867 868 On the initial call to GetNextSelector() to start the IPsec configuration database 869 search, a pointer to the buffer with all zero value is passed in Selector. Calls 870 to SetData() between calls to GetNextSelector may produce unpredictable results. 871 872 @param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance. 873 @param[in] DataType The type of IPsec configuration data to retrieve. 874 @param[in, out] SelectorSize The size of the Selector buffer. 875 @param[in, out] Selector On input, supplies the pointer to last Selector that was 876 returned by GetNextSelector(). 877 On output, returns one copy of the current entry Selector 878 of a given DataType. 879 880 @retval EFI_SUCCESS The specified configuration data was obtained successfully. 881 @retval EFI_INVALID_PARAMETER One or more of the followings are TRUE: 882 - This is NULL. 883 - SelectorSize is NULL. 884 - Selector is NULL. 885 @retval EFI_NOT_FOUND The next configuration data entry was not found. 886 @retval EFI_UNSUPPORTED The specified DataType is not supported. 887 @retval EFI_BUFFER_TOO_SMALL The SelectorSize is too small for the result. This parameter 888 has been updated with the size needed to complete the search 889 request. 890 891 **/ 892 EFI_STATUS 893 EFIAPI 894 EfiIpSecConfigGetNextSelector ( 895 IN EFI_IPSEC_CONFIG_PROTOCOL *This, 896 IN EFI_IPSEC_CONFIG_DATA_TYPE DataType, 897 IN OUT UINTN *SelectorSize, 898 IN OUT EFI_IPSEC_CONFIG_SELECTOR *Selector 899 ); 900 901 /** 902 Register an event that is to be signaled whenever a configuration process on the 903 specified IPsec configuration information is done. 904 905 The register function is not surpport now and always returns EFI_UNSUPPORTED. 906 907 @param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance. 908 @param[in] DataType The type of data to be registered the event for. 909 @param[in] Event The event to be registered. 910 911 @retval EFI_SUCCESS The event is registered successfully. 912 @retval EFI_INVALID_PARAMETER This is NULL, or Event is NULL. 913 @retval EFI_ACCESS_DENIED The Event is already registered for the DataType. 914 @retval EFI_UNSUPPORTED The notify registration unsupported, or the specified 915 DataType is not supported. 916 917 **/ 918 EFI_STATUS 919 EFIAPI 920 EfiIpSecConfigRegisterNotify ( 921 IN EFI_IPSEC_CONFIG_PROTOCOL *This, 922 IN EFI_IPSEC_CONFIG_DATA_TYPE DataType, 923 IN EFI_EVENT Event 924 ); 925 926 927 /** 928 Remove the specified event that was previously registered on the specified IPsec 929 configuration data. 930 931 This function is not supported now and always returns EFI_UNSUPPORTED. 932 933 @param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance. 934 @param[in] DataType The configuration data type to remove the registered event for. 935 @param[in] Event The event to be unregistered. 936 937 @retval EFI_SUCCESS The event was removed successfully. 938 @retval EFI_NOT_FOUND The Event specified by DataType could not be found in the 939 database. 940 @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL. 941 @retval EFI_UNSUPPORTED The notify registration unsupported or the specified 942 DataType is not supported. 943 944 **/ 945 EFI_STATUS 946 EFIAPI 947 EfiIpSecConfigUnregisterNotify ( 948 IN EFI_IPSEC_CONFIG_PROTOCOL *This, 949 IN EFI_IPSEC_CONFIG_DATA_TYPE DataType, 950 IN EFI_EVENT Event 951 ); 952 953 extern LIST_ENTRY mConfigData[IPsecConfigDataTypeMaximum]; 954 955 #endif 956