1 /*
2 * Copyright 2016-2020 Advanced Micro Devices, Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
21 *
22 * Authors: AMD
23 *
24 */
25
26 #include "dce110/dce110_hw_sequencer.h"
27 #include "dcn10/dcn10_hw_sequencer.h"
28 #include "dcn20/dcn20_hwseq.h"
29 #include "dcn21/dcn21_hwseq.h"
30 #include "dcn30/dcn30_hwseq.h"
31 #include "dcn301_hwseq.h"
32
33 #include "dcn301_init.h"
34
35 static const struct hw_sequencer_funcs dcn301_funcs = {
36 .program_gamut_remap = dcn10_program_gamut_remap,
37 .init_hw = dcn10_init_hw,
38 .power_down_on_boot = dcn10_power_down_on_boot,
39 .apply_ctx_to_hw = dce110_apply_ctx_to_hw,
40 .apply_ctx_for_surface = NULL,
41 .program_front_end_for_ctx = dcn20_program_front_end_for_ctx,
42 .wait_for_pending_cleared = dcn10_wait_for_pending_cleared,
43 .post_unlock_program_front_end = dcn20_post_unlock_program_front_end,
44 .update_plane_addr = dcn20_update_plane_addr,
45 .update_dchub = dcn10_update_dchub,
46 .update_pending_status = dcn10_update_pending_status,
47 .program_output_csc = dcn20_program_output_csc,
48 .enable_accelerated_mode = dce110_enable_accelerated_mode,
49 .enable_timing_synchronization = dcn10_enable_timing_synchronization,
50 .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset,
51 .update_info_frame = dcn30_update_info_frame,
52 .send_immediate_sdp_message = dcn10_send_immediate_sdp_message,
53 .enable_stream = dcn20_enable_stream,
54 .disable_stream = dce110_disable_stream,
55 .unblank_stream = dcn20_unblank_stream,
56 #ifdef FREESYNC_POWER_OPTIMIZE
57 .are_streams_coarse_grain_aligned = dcn20_are_streams_coarse_grain_aligned,
58 #endif
59 .blank_stream = dce110_blank_stream,
60 .enable_audio_stream = dce110_enable_audio_stream,
61 .disable_audio_stream = dce110_disable_audio_stream,
62 .disable_plane = dcn20_disable_plane,
63 .pipe_control_lock = dcn20_pipe_control_lock,
64 .interdependent_update_lock = dcn10_lock_all_pipes,
65 .cursor_lock = dcn10_cursor_lock,
66 .prepare_bandwidth = dcn20_prepare_bandwidth,
67 .optimize_bandwidth = dcn20_optimize_bandwidth,
68 .update_bandwidth = dcn20_update_bandwidth,
69 .set_drr = dcn10_set_drr,
70 .get_position = dcn10_get_position,
71 .set_static_screen_control = dcn10_set_static_screen_control,
72 .setup_stereo = dcn10_setup_stereo,
73 .set_avmute = dcn30_set_avmute,
74 .log_hw_state = dcn10_log_hw_state,
75 .get_hw_state = dcn10_get_hw_state,
76 .clear_status_bits = dcn10_clear_status_bits,
77 .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
78 .edp_backlight_control = dce110_edp_backlight_control,
79 .edp_power_control = dce110_edp_power_control,
80 .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
81 .set_cursor_position = dcn10_set_cursor_position,
82 .set_cursor_attribute = dcn10_set_cursor_attribute,
83 .set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
84 .setup_periodic_interrupt = dcn10_setup_periodic_interrupt,
85 .set_clock = dcn10_set_clock,
86 .get_clock = dcn10_get_clock,
87 .program_triplebuffer = dcn20_program_triple_buffer,
88 .enable_writeback = dcn30_enable_writeback,
89 .disable_writeback = dcn30_disable_writeback,
90 .update_writeback = dcn30_update_writeback,
91 .mmhubbub_warmup = dcn30_mmhubbub_warmup,
92 .dmdata_status_done = dcn20_dmdata_status_done,
93 .program_dmdata_engine = dcn30_program_dmdata_engine,
94 .set_dmdata_attributes = dcn20_set_dmdata_attributes,
95 .init_sys_ctx = dcn20_init_sys_ctx,
96 .init_vm_ctx = dcn20_init_vm_ctx,
97 .set_flip_control_gsl = dcn20_set_flip_control_gsl,
98 .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
99 .calc_vupdate_position = dcn10_calc_vupdate_position,
100 .set_backlight_level = dcn21_set_backlight_level,
101 .set_abm_immediate_disable = dcn21_set_abm_immediate_disable,
102 .set_pipe = dcn21_set_pipe,
103 .enable_lvds_link_output = dce110_enable_lvds_link_output,
104 .enable_tmds_link_output = dce110_enable_tmds_link_output,
105 .enable_dp_link_output = dce110_enable_dp_link_output,
106 .disable_link_output = dce110_disable_link_output,
107 .set_disp_pattern_generator = dcn30_set_disp_pattern_generator,
108 .get_dcc_en_bits = dcn10_get_dcc_en_bits,
109 .optimize_pwr_state = dcn21_optimize_pwr_state,
110 .exit_optimized_pwr_state = dcn21_exit_optimized_pwr_state,
111 .update_visual_confirm_color = dcn10_update_visual_confirm_color,
112 };
113
114 static const struct hwseq_private_funcs dcn301_private_funcs = {
115 .init_pipes = dcn10_init_pipes,
116 .update_plane_addr = dcn20_update_plane_addr,
117 .plane_atomic_disconnect = dcn10_plane_atomic_disconnect,
118 .update_mpcc = dcn20_update_mpcc,
119 .set_input_transfer_func = dcn30_set_input_transfer_func,
120 .set_output_transfer_func = dcn30_set_output_transfer_func,
121 .power_down = dce110_power_down,
122 .enable_display_power_gating = dcn10_dummy_display_power_gating,
123 .blank_pixel_data = dcn20_blank_pixel_data,
124 .reset_hw_ctx_wrap = dcn20_reset_hw_ctx_wrap,
125 .enable_stream_timing = dcn20_enable_stream_timing,
126 .edp_backlight_control = dce110_edp_backlight_control,
127 .disable_stream_gating = dcn20_disable_stream_gating,
128 .enable_stream_gating = dcn20_enable_stream_gating,
129 .setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt,
130 .did_underflow_occur = dcn10_did_underflow_occur,
131 .init_blank = dcn20_init_blank,
132 .disable_vga = dcn20_disable_vga,
133 .bios_golden_init = dcn10_bios_golden_init,
134 .plane_atomic_disable = dcn20_plane_atomic_disable,
135 .plane_atomic_power_down = dcn10_plane_atomic_power_down,
136 .enable_power_gating_plane = dcn20_enable_power_gating_plane,
137 .dpp_pg_control = dcn20_dpp_pg_control,
138 .hubp_pg_control = dcn20_hubp_pg_control,
139 .program_all_writeback_pipes_in_tree = dcn30_program_all_writeback_pipes_in_tree,
140 .update_odm = dcn20_update_odm,
141 .dsc_pg_control = dcn20_dsc_pg_control,
142 .set_hdr_multiplier = dcn10_set_hdr_multiplier,
143 .verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high,
144 .wait_for_blank_complete = dcn20_wait_for_blank_complete,
145 .dccg_init = dcn20_dccg_init,
146 .set_blend_lut = dcn30_set_blend_lut,
147 .set_shaper_3dlut = dcn20_set_shaper_3dlut,
148 };
149
dcn301_hw_sequencer_construct(struct dc * dc)150 void dcn301_hw_sequencer_construct(struct dc *dc)
151 {
152 dc->hwss = dcn301_funcs;
153 dc->hwseq->funcs = dcn301_private_funcs;
154 }
155