1 /*- 2 * Copyright (c) 1996-1999 Distributed Processing Technology Corporation 3 * All rights reserved. 4 * 5 * Redistribution and use in source form, with or without modification, are 6 * permitted provided that redistributions of source code must retain the 7 * above copyright notice, this list of conditions and the following disclaimer. 8 * 9 * This software is provided `as is' by Distributed Processing Technology and 10 * any express or implied warranties, including, but not limited to, the 11 * implied warranties of merchantability and fitness for a particular purpose, 12 * are disclaimed. In no event shall Distributed Processing Technology be 13 * liable for any direct, indirect, incidental, special, exemplary or 14 * consequential damages (including, but not limited to, procurement of 15 * substitute goods or services; loss of use, data, or profits; or business 16 * interruptions) however caused and on any theory of liability, whether in 17 * contract, strict liability, or tort (including negligence or otherwise) 18 * arising in any way out of the use of this driver software, even if advised 19 * of the possibility of such damage. 20 * 21 * $FreeBSD: src/sys/dev/asr/osd_unix.h,v 1.9 2005/01/06 01:42:29 imp Exp $ 22 */ 23 24 #ifndef __OSD_UNIX_H 25 #define __OSD_UNIX_H 26 27 #include <sys/ioccom.h> 28 29 /*File - OSD_UNIX.H */ 30 /*****************************************************************************/ 31 /* */ 32 /*Description: */ 33 /* */ 34 /* This file contains definitions for the UNIX OS dependent layer of the */ 35 /*DPT engine. */ 36 /* */ 37 /*Copyright Distributed Processing Technology, Corp. */ 38 /* 140 Candace Dr. */ 39 /* Maitland, Fl. 32751 USA */ 40 /* Phone: (407) 830-5522 Fax: (407) 260-5366 */ 41 /* All Rights Reserved */ 42 /* */ 43 /*Author: Bob Pasteur */ 44 /*Date: 5/28/93 */ 45 /* */ 46 /*Editors: */ 47 /* 3/7/96 salyzyn@dpt.com */ 48 /* Added BSDi extensions */ 49 /* 30/9/99 salyzyn@dpt.com */ 50 /* Added I2ORESCANCMD */ 51 /* 7/12/99 salyzyn@dpt.com */ 52 /* Added I2ORESETCMD */ 53 /* */ 54 /*Remarks: */ 55 /* */ 56 /* */ 57 /*****************************************************************************/ 58 59 /* Definitions - Defines & Constants ---------------------------------------*/ 60 61 #define DPT_TurnAroundKey 0x01 /* TurnAround Message Type for engine */ 62 #define DPT_EngineKey 0x02 /* Message Que and Type for engine */ 63 #define DPT_LoggerKey 0x03 /* Message Type For Logger */ 64 #define DPT_CommEngineKey 0x04 /* Message Que Type Created */ 65 66 #define MSG_RECEIVE 0x40000000 /* Ored Into Logger PID For Return Msg */ 67 68 #define ENGMSG_ECHO 0x00 /* Turnarround Echo Engine Message */ 69 #define ENGMSG_OPEN 0x01 /* Turnarround Open Engine Message */ 70 #define ENGMSG_CLOSE 0x02 /* Turnarround Close Engine Message */ 71 72 /* Message Que Creation Flags */ 73 74 #define MSG_URD 00400 75 #define MSG_UWR 00200 76 #define MSG_GRD 00040 77 #define MSG_GWR 00020 78 #define MSG_ORD 00004 79 #define MSG_OWR 00002 80 #define MSG_ALLRD 00444 81 #define MSG_ALLWR 00222 82 83 /* Message Que Creation Flags */ 84 85 #define SHM_URD 00400 86 #define SHM_UWR 00200 87 #define SHM_GRD 00040 88 #define SHM_GWR 00020 89 #define SHM_ORD 00004 90 #define SHM_OWR 00002 91 #define SHM_ALLRD 00444 92 #define SHM_ALLWR 00222 93 94 /* Program Exit Codes */ 95 96 #define ExitGoodStatus 0 97 #define ExitBadParameter 1 98 #define ExitSignalFail 3 99 #define ExitMsqAllocFail 5 100 #define ExitBuffAllocFail 6 101 #define ExitMsgSendFail 8 102 #define ExitMsgReceiveFail 9 103 104 #define ExitEngOpenFail 10 105 #define ExitDuplicateEngine 11 106 107 #define ExitCommAllocFail 12 108 #define ExitDuplicateCommEng 13 109 #define ExitCommConnectFail 14 110 111 #ifndef MAX_HAS 112 113 #define MAX_HAS 18 114 #define MAX_NAME 100 115 116 #endif /* ifndef MAX_HAS */ 117 118 119 typedef struct { 120 uCHAR ConfigLength[4]; /* Len in bytes after this field. */ 121 uCHAR EATAsignature[4]; 122 uCHAR EATAversion; 123 uCHAR Flags1; 124 uCHAR PadLength[2]; 125 uCHAR HBA[4]; 126 uCHAR CPlength[4]; /* Command Packet Length */ 127 uCHAR SPlength[4]; /* Status Packet Length */ 128 uCHAR QueueSize[2]; /* Controller Que depth */ 129 uCHAR SG_Size[4]; 130 uCHAR Flags2; 131 uCHAR Reserved0; /* Reserved Field */ 132 uCHAR Flags3; 133 uCHAR ScsiValues; 134 uCHAR MaxLUN; /* Maximun LUN Supported */ 135 uCHAR Flags4; 136 uCHAR RaidNum; /* RAID HBA Number For Stripping */ 137 uCHAR Reserved3; /* Reserved Field */ 138 } DptReadConfig_t; 139 140 #if defined(_DPT_SOLARIS) 141 142 #include <sys/types.h> 143 #include <sys/ddidmareq.h> 144 #include <sys/scsi/scsi.h> 145 /*#define _KERNEL */ 146 #include <sys/dditypes.h> 147 #include <sys/ddi_impldefs.h> 148 #include <sys/scsi/impl/transport.h> 149 /* #undef _KERNEL */ 150 151 #undef MSG_DISCONNECT 152 #define MSG_DISCONNECT 0x11L 153 154 #define EATAUSRCMD 1 155 #define DPT_SIGNATURE 2 156 #define DPT_NUMCTRLS 3 157 #define DPT_CTRLINFO 4 158 #define DPT_SYSINFO 5 159 #define DPT_BLINKLED 6 160 #define I2OUSRCMD 7 161 /* #define I2ORESCANCMD 8 */ /* Use DPT_IO_ACCESS instead */ 162 /* #define I2ORESETCMD 9 */ /* Use DPT_IO_ACCESS instead */ 163 164 #define DPT_MAX_DMA_SEGS 32 /* Max used Scatter/Gather seg */ 165 166 struct dpt_sg { 167 paddr_t data_addr; 168 uLONG data_len; 169 }; 170 171 typedef struct { 172 uSHORT NumHBAs; 173 uLONG IOAddrs[18]; 174 } GetHbaInfo_t; 175 176 #elif defined(_DPT_DGUX) 177 178 #ifndef _IOWR 179 # define _IOWR(x,y,z) (0x0fff3900|y) 180 #endif 181 #ifndef _IOW 182 # define _IOW(x,y,z) (0x0fff3900|y) 183 #endif 184 #ifndef _IOR 185 # define _IOR(x,y,z) (0x0fff3900|y) 186 #endif 187 #ifndef _IO 188 # define _IO(x,y) (0x0fff3900|y) 189 #endif 190 /* EATA PassThrough Command */ 191 #define EATAUSRCMD _IOWR('D',65,EATA_CP) 192 /* Get Signature Structure */ 193 #define DPT_SIGNATURE _IOR('D',67,dpt_sig_S) 194 /* Get Number Of DPT Adapters */ 195 #define DPT_NUMCTRLS _IOR('D',68,int) 196 /* Get Adapter Info Structure */ 197 #define DPT_CTRLINFO _IOR('D',69,CtrlInfo) 198 /* Get System Info Structure */ 199 #define DPT_SYSINFO _IOR('D',72,sysInfo_S) 200 /* Get Blink LED Code */ 201 #define DPT_BLINKLED _IOR('D',75,int) 202 /* Get Statistical information (if available) */ 203 #define DPT_STATS_INFO _IOR('D',80,STATS_DATA) 204 /* Clear the statistical information */ 205 #define DPT_STATS_CLEAR _IO('D',81) 206 /* Send an I2O command */ 207 #define I2OUSRCMD _IO('D',76) 208 /* Inform driver to re-acquire LCT information */ 209 #define I2ORESCANCMD _IO('D',77) 210 /* Inform driver to reset adapter */ 211 #define I2ORESETCMD _IO('D',78) 212 213 #elif defined(SNI_MIPS) 214 /* Unix Ioctl Command definitions */ 215 216 #define EATAUSRCMD (('D'<<8)|65) 217 #define DPT_DEBUG (('D'<<8)|66) 218 #define DPT_SIGNATURE (('D'<<8)|67) 219 #define DPT_NUMCTRLS (('D'<<8)|68) 220 #define DPT_CTRLINFO (('D'<<8)|69) 221 #define DPT_STATINFO (('D'<<8)|70) 222 #define DPT_CLRSTAT (('D'<<8)|71) 223 #define DPT_SYSINFO (('D'<<8)|72) 224 /* Set Timeout Value */ 225 #define DPT_TIMEOUT (('D'<<8)|73) 226 /* Get config Data */ 227 #define DPT_CONFIG (('D'<<8)|74) 228 /* Get config Data */ 229 #define DPT_BLINKLED (('D'<<8)|75) 230 /* Get Statistical information (if available) */ 231 #define DPT_STATS_INFO (('D'<<8)|80) 232 /* Clear the statistical information */ 233 #define DPT_STATS_CLEAR (('D'<<8)|81) 234 /* Send an I2O command */ 235 #define I2OUSRCMD (('D'<<8)|76) 236 /* Inform driver to re-acquire LCT information */ 237 #define I2ORESCANCMD (('D'<<8)|77) 238 /* Inform driver to reset adapter */ 239 #define I2ORESETCMD (('D'<<8)|78) 240 241 #else 242 243 /* Unix Ioctl Command definitions */ 244 245 #ifdef _DPT_AIX 246 247 #undef _IOWR 248 #undef _IOW 249 #undef _IOR 250 #undef _IO 251 #endif 252 253 #ifndef _IOWR 254 # define _IOWR(x,y,z) (((x)<<8)|y) 255 #endif 256 #ifndef _IOW 257 # define _IOW(x,y,z) (((x)<<8)|y) 258 #endif 259 #ifndef _IOR 260 # define _IOR(x,y,z) (((x)<<8)|y) 261 #endif 262 #ifndef _IO 263 # define _IO(x,y) (((x)<<8)|y) 264 #endif 265 /* EATA PassThrough Command */ 266 #define EATAUSRCMD _IOWR('D',65,EATA_CP) 267 /* Set Debug Level If Enabled */ 268 #define DPT_DEBUG _IOW('D',66,int) 269 /* Get Signature Structure */ 270 #define DPT_SIGNATURE _IOR('D',67,dpt_sig_S) 271 #if defined __bsdi__ 272 #define DPT_SIGNATURE_PACKED _IOR('D',67,dpt_sig_S_Packed) 273 #endif 274 /* Get Number Of DPT Adapters */ 275 #define DPT_NUMCTRLS _IOR('D',68,int) 276 /* Get Adapter Info Structure */ 277 #define DPT_CTRLINFO _IOR('D',69,CtrlInfo) 278 /* Get Statistics If Enabled */ 279 #define DPT_STATINFO _IO('D',70) 280 /* Clear Stats If Enabled */ 281 #define DPT_CLRSTAT _IO('D',71) 282 /* Get System Info Structure */ 283 #define DPT_SYSINFO _IOR('D',72,sysInfo_S) 284 /* Set Timeout Value */ 285 #define DPT_TIMEOUT _IO('D',73) 286 /* Get config Data */ 287 #define DPT_CONFIG _IO('D',74) 288 /* Get Blink LED Code */ 289 #define DPT_BLINKLED _IOR('D',75,int) 290 /* Get Statistical information (if available) */ 291 #define DPT_STATS_INFO _IOR('D',80,STATS_DATA) 292 /* Clear the statistical information */ 293 #define DPT_STATS_CLEAR _IO('D',81) 294 /* Get Performance metrics */ 295 #define DPT_PERF_INFO _IOR('D',82,dpt_perf_t) 296 /* Send an I2O command */ 297 #define I2OUSRCMD _IO('D',76) 298 /* Inform driver to re-acquire LCT information */ 299 #define I2ORESCANCMD _IO('D',77) 300 /* Inform driver to reset adapter */ 301 #define I2ORESETCMD _IO('D',78) 302 #if defined _DPT_LINUX 303 /* See if the target is mounted */ 304 #define DPT_TARGET_BUSY _IOR('D',79, TARGET_BUSY_T) 305 #endif 306 307 308 #endif /* _DPT_SOLARIS else */ 309 310 /* Adapter Flags Field Bit Definitions */ 311 312 #define CTLR_INSTALLED 0x00000001 /* Adapter Was Installed */ 313 #define CTLR_DMA 0x00000002 /* DMA Supported */ 314 #define CTLR_OVERLAP 0x00000004 /* Overlapped Commands Support */ 315 #define CTLR_SECONDARY 0x00000008 /* I/O Address Not 0x1f0 */ 316 #define CTLR_BLINKLED 0x00000010 /* Adapter In Blink LED State */ 317 #define CTLR_HBACI 0x00000020 /* Cache Inhibit Supported */ 318 #define CTLR_CACHE 0x00000040 /* Adapter Has Cache */ 319 #define CTLR_SANE 0x00000080 /* Adapter Functioning OK */ 320 #define CTLR_BUS_QUIET 0x00000100 /* Bus Quite On This Adapter */ 321 #define CTLR_ABOVE_16 0x00000200 /* Support For Mem. Above 16 MB */ 322 #define CTLR_SCAT_GATH 0x00000400 /* Scatter Gather Supported */ 323 324 325 /* Definitions - Structure & Typedef ---------------------------------------*/ 326 327 typedef struct { 328 uLONG MsgID; 329 DPT_TAG_T engineTag; 330 DPT_TAG_T targetTag; 331 DPT_MSG_T engEvent; 332 long BufferID; 333 uLONG FromEngBuffOffset; 334 uLONG callerID; 335 DPT_RTN_T result; 336 uLONG timeOut; 337 } MsgHdr; 338 339 #define MsgDataSize sizeof(MsgHdr) - 4 340 341 #ifndef SNI_MIPS 342 343 /*-------------------------------------------------------------------------*/ 344 /* EATA Command Packet definition */ 345 /*-------------------------------------------------------------------------*/ 346 347 typedef struct EATACommandPacket { 348 349 #ifdef _DPT_UNIXWARE 350 351 uCHAR EataID[4]; 352 uINT EataCmd; 353 uCHAR *CmdBuffer; 354 355 #endif /* _DPT_UNIXWARE */ 356 357 #ifdef _DPT_AIX 358 359 uCHAR HbaTargetID; 360 uCHAR HbaLUN; 361 362 #endif /* _DPT_AIX */ 363 364 uCHAR cp_Flags1; /* Command Flags */ 365 uCHAR cp_Req_Len; /* AutoRequestSense Data length. */ 366 uCHAR cp_Resv1[3]; /* Reserved Fields */ 367 uCHAR cp_Flags2; 368 uCHAR cp_Flags3; 369 uCHAR cp_ScsiAddr; 370 uCHAR cp_msg0; /* Identify and Disconnect Message. */ 371 uCHAR cp_msg1; 372 uCHAR cp_msg2; 373 uCHAR cp_msg3; 374 uCHAR cp_cdb[12]; /* SCSI cdb for command. */ 375 uLONG cp_dataLen; /* Data length in Bytes for command. */ 376 uLONG cp_Vue; /* Vendor Unique Area */ 377 uCHAR *cp_DataAddr; /* Data Address For The Command. */ 378 uCHAR *cp_SpAddr; /* Status Packet Physical Address. */ 379 uCHAR *cp_SenseAddr; /* AutoRequestSense Data Phy Address. */ 380 381 #ifdef _DPT_SOLARIS 382 383 uCHAR HostStatus; 384 uCHAR TargetStatus; 385 uCHAR CdbLength; 386 uCHAR SG_Size; 387 struct scsi_arq_status ReqSenseData; 388 struct dpt_sg SG_List[DPT_MAX_DMA_SEGS]; 389 union { 390 char *b_scratch; 391 struct scsi_cmd *b_ownerp; 392 } cc; 393 paddr_t ccb_paddr; 394 uSHORT IOAddress; 395 396 #else /* _DPT_SOLARIS */ 397 398 uLONG TimeOut ; 399 uCHAR HostStatus; 400 uCHAR TargetStatus; 401 uCHAR Retries; 402 403 #endif /* _DPT_SOLARIS else */ 404 405 } EATA_CP; 406 #endif /* SNI_MIPS */ 407 408 409 /* Control Flags 1 Definitions */ 410 411 #define SCSI_RESET 0x01 /* Cause a SCSI Bus reset on the cmd */ 412 #define HBA_INIT 0x02 /* Cause Controller to reInitialize */ 413 #define AUTO_REQ_SENSE 0x04 /* Do Auto Request Sense on errors */ 414 #define SCATTER_GATHER 0x08 /* Data Ptr points to a SG Packet */ 415 #define INTERPRET 0x20 /* Interpret the SCSI cdb of own use */ 416 #define DATA_OUT 0x04 /* Data Out phase with command */ 417 #define DATA_IN 0x08 /* Data In phase with command */ 418 419 /* Control Flags 2 Definitions */ 420 421 #define FIRMWARE_NESTED 0x01 422 423 424 /* Control Flags 3 Definitions */ 425 426 #define PHYSICAL_UNIT 0x01 /* Send Command Directly To Target */ 427 #define IAT 0x02 /* Inhibit Address Translation */ 428 #define HBACI 0x04 /* Inhibit Caching */ 429 430 431 /* Structure Returned From Get Controller Info */ 432 433 typedef struct { 434 435 uCHAR state; /* Operational state */ 436 uCHAR id; /* Host adapter SCSI id */ 437 int vect; /* Interrupt vector number */ 438 int base; /* Base I/O address */ 439 int njobs; /* # of jobs sent to HA */ 440 int qdepth; /* Controller queue depth. */ 441 int wakebase; /* mpx wakeup base index. */ 442 uLONG SGsize; /* Scatter/Gather list size. */ 443 unsigned heads; /* heads for drives on cntlr. */ 444 unsigned sectors; /* sectors for drives on cntlr. */ 445 uCHAR do_drive32; /* Flag for Above 16 MB Ability */ 446 uCHAR BusQuiet; /* SCSI Bus Quiet Flag */ 447 char idPAL[4]; /* 4 Bytes Of The ID Pal */ 448 uCHAR primary; /* 1 For Primary, 0 For Secondary */ 449 uCHAR eataVersion; /* EATA Version */ 450 uLONG cpLength; /* EATA Command Packet Length */ 451 uLONG spLength; /* EATA Status Packet Length */ 452 uCHAR drqNum; /* DRQ Index (0,5,6,7) */ 453 uCHAR flag1; /* EATA Flags 1 (Byte 9) */ 454 uCHAR flag2; /* EATA Flags 2 (Byte 30) */ 455 456 } CtrlInfo; 457 458 #ifndef SNI_MIPS 459 #ifdef _DPT_UNIXWARE 460 461 typedef struct { 462 463 uINT state; /* Operational state */ 464 uCHAR id[4]; /* Host adapter SCSI id */ 465 uINT vect; /* Interrupt vector number */ 466 uLONG base; /* Base I/O address */ 467 int ha_max_jobs; /* Max number of Active Jobs */ 468 uLONG ha_cacheParams; 469 int ha_nbus; /* Number Of Busses on HBA */ 470 int ha_ntargets; /* Number Of Targets Supported */ 471 int ha_nluns; /* Number Of LUNs Supported */ 472 int ha_tshift; /* Shift value for target */ 473 int ha_bshift; /* Shift value for bus */ 474 uINT ha_npend; /* # of jobs sent to HA */ 475 int ha_active_jobs; /* Number Of Active Jobs */ 476 477 } HbaInfo; 478 479 /* SDI ioctl prefix for hba specific ioctl's */ 480 481 #define SDI_IOC (('S'<<24)|('D'<<16)|('I'<<8)) 482 483 #define SDI_HBANAME ((SDI_IOC)|0x14) /* Get HBA module name */ 484 #define SDI_SEND 0x0081 /* Send a SCSI command */ 485 486 #else 487 488 typedef struct { 489 490 uLONG flags; /* Operational State Flags */ 491 uCHAR id[4]; /* Host Adapter SCSI ID */ 492 int vect; /* Interrupt Vector Number */ 493 int base; /* Base I/O Address */ 494 int njobs; /* # Of CCBs Outstanding To HBA */ 495 int qdepth; /* Controller Queue depth. */ 496 uLONG SGsize; /* Scatter/Gather List Size. */ 497 char idPAL[4]; /* 4 Bytes Of The ID Pal */ 498 uCHAR eataVersion; /* EATA Version */ 499 uLONG cpLength; /* EATA Command Packet Length */ 500 uLONG spLength; /* EATA Status Packet Length */ 501 uCHAR drqNum; /* DRQ Index (0,5,6,7) */ 502 uCHAR eataflag1; /* EATA Flags 1 (Byte 9) */ 503 uCHAR eataflag2; /* EATA Flags 2 (Byte 30) */ 504 uCHAR maxChannel; /* Maximum Channel Number */ 505 uCHAR maxID; /* Maximum Target ID */ 506 uCHAR maxLUN; /* Maximum LUN */ 507 uCHAR HbaBusType; /* HBA Bus Type, EISA, PCI, etc */ 508 uCHAR RaidNum; /* Host Adapter RAID Number */ 509 510 } HbaInfo; 511 512 #endif /* _DPT_UNIXWARE */ 513 #endif /* SNI_MIPS */ 514 515 516 #ifdef _DPT_AIX 517 518 /* 519 * DPT Host Adapter config information structure - this structure contains 520 * configuration information about an adapter. It is imbedded into the 521 * dpt_ctl structure. 522 */ 523 524 typedef struct dpt_cfg { 525 uchar flags; /* Operational state flags */ 526 uchar id[4]; /* Host adapter SCSI IDs */ 527 int vect; /* Interrupt vector number */ 528 ulong base_addr; /* Base I/O address */ 529 int qdepth; /* Controller queue depth. */ 530 ulong SGsize; /* Max scatter/gather list sz */ 531 ulong SGmax; /* Max s/g we can use per req */ 532 uchar eataVersion; /* EATA version */ 533 ushort cpPadLen; /* # of pad bytes sent to HA for 534 PIO commands */ 535 ulong cpLength; /* EATA Command Packet length */ 536 ulong spLength; /* EATA Status Packet length */ 537 uchar eataflag1; /* EATA Flags 1 (Byte 9) */ 538 uchar eataflag2; /* EATA Flags 2 (Byte 30) */ 539 uchar maxChan; /* Maximum Channel number */ 540 uchar maxID; /* Maximum target ID */ 541 uchar maxLUN; /* Maximum LUN */ 542 uchar HbaBusType; /* HBA bus type, EISA, PCI, etc */ 543 uchar RaidNum; /* Host adapter RAID number */ 544 } DptCfg_t; 545 546 #endif /* _DPT_AIX */ 547 548 549 #define MAX_ELEMENT_COUNT 64 550 #define MAX_BUCKET_COUNT 10 551 552 /* 553 * DPT statistics structure definitions 554 */ 555 typedef struct IO_SIZE_STATS 556 { 557 uLONG TotalIoCount; 558 uLONG IoCountRead; 559 uLONG IoCountReadSg; 560 uLONG IoCountWrite; 561 uLONG IoCountWriteSg; 562 uLONG UnalignedIoAddress; 563 uLONG SgElementCount[MAX_ELEMENT_COUNT]; 564 565 } IO_SIZE_STATS_T, *pIO_SIZE_STATS_T; 566 567 typedef struct STATS_DATA 568 { 569 uLONG TotalIoCount; 570 uLONG TotalUnCachedIoCount; 571 uLONG MaxOutstandingIoCount; 572 uLONG CurrentOutstandingIoCount; 573 uLONG OutstandingIoRunningCount; 574 uLONG UnalignedPktCount; 575 uLONG UnalignedSgCount; 576 uLONG NonPageListAddressSgCount; 577 uLONG MaxMessagesPerInterrupt; 578 IO_SIZE_STATS_T IoSize[MAX_BUCKET_COUNT]; 579 580 } STATS_DATA_T, *pSTATS_DATA_T; 581 582 typedef struct TARGET_BUSY 583 { 584 uLONG channel; 585 uLONG id; 586 uLONG lun; 587 uLONG isBusy; 588 } TARGET_BUSY_T; 589 #endif /* __OSD_UNIX_H */ 590