| /freebsd/sys/contrib/device-tree/Bindings/arm/ |
| H A D | atmel-sysregs.txt | 5 - reg : Should contain registers location and length
8 - compatible: Should be "atmel,at91sam9260-pit"
9 - reg: Should contain registers location and length
14 - compatible: Should be "microchip,sam9x60-pit64b"
15 - reg: Should contain registers location and length
16 - interrupts: Should contain interrupt for PIT64B timer
21 - reg: Should contain registers location and length
35 - reg: Should contain registers location and length
46 - reg: Should contain registers location and length
66 - reg: Should contain registers location and length
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/arm/omap/ |
| H A D | l4.txt | 6 - compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
7 Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
8 Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
9 Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
10 Should be "ti,omap4-l4-per" for OMAP4 family l4 per bus
11 Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
12 Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
13 Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
14 Should be "ti,dra7-l4-cfg" for DRA7 family l4 cfg bus
15 Should be "ti,dra7-l4-wkup" for DRA7 family l4 wkup bus
[all …]
|
| H A D | l3-noc.txt | 7 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
8 Should be "ti,omap4-l3-noc" for OMAP4 family
9 Should be "ti,omap5-l3-noc" for OMAP5 family
10 Should be "ti,dra7-l3-noc" for DRA7 family
11 Should be "ti,am4372-l3-noc" for AM43 family
|
| /freebsd/sys/contrib/device-tree/Bindings/edac/ |
| H A D | socfpga-eccmgr.txt | 8 - compatible : Should be "altr,socfpga-ecc-manager"
17 - compatible : Should be "altr,socfpga-l2-ecc"
24 - compatible : Should be "altr,socfpga-ocram-ecc"
58 - compatible : Should be "altr,socfpga-a10-ecc-manager"
73 - compatible : Should be "altr,socfpga-a10-l2-ecc"
80 - compatible : Should be "altr,socfpga-a10-ocram-ecc"
95 - compatible : Should be "altr,socfpga-nand-ecc"
103 - compatible : Should be "altr,socfpga-dma-ecc"
111 - compatible : Should be "altr,socfpga-usb-ecc"
119 - compatible : Should be "altr,socfpga-qspi-ecc"
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/spi/ |
| H A D | atmel-quadspi.txt | 4 - compatible: Should be one of the following:
7 - reg: Should contain the locations and lengths of the base registers
9 - reg-names: Should contain the resource reg names:
12 - interrupts: Should contain the interrupt for the device.
13 - clocks: Should reference the peripheral clock and the QSPI system
15 - clock-names: Should contain "pclk" for the peripheral clock and "qspick"
17 - #address-cells: Should be <1>.
18 - #size-cells: Should be <0>.
|
| H A D | spi-sprd.txt | 4 - compatible: Should be "sprd,sc9860-spi".
6 - interrupts: Should contain SPI interrupt.
7 - clock-names: Should contain following entries:
14 address on the SPI bus. Should be set to 1.
15 - #size-cells: Should be set to 0.
18 dma-names: Should contain names of the SPI used DMA channel.
19 dmas: Should contain DMA channels and DMA slave ids which the SPI used
|
| /freebsd/sys/contrib/device-tree/Bindings/usb/ |
| H A D | atmel-usb.txt | 6 - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
9 - interrupts: Should contain ohci interrupt
11 - clock-names: Should contain three strings
36 - interrupts: Should contain ehci interrupt
38 - clock-names: Should contain two strings
57 - compatible: Should be one of the following
63 - interrupts: Should contain macb interrupt
65 - clock-names: Should contain two strings
85 - compatible: Should be one of the following
94 - interrupts: Should contain usba interrupt
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/clock/ |
| H A D | moxa,moxart-clock.txt | 15 - #clock-cells : Should be 0
16 - reg : Should contain registers location and length
17 - clocks : Should contain phandle + clock-specifier for the parent clock
20 - clock-output-names : Should contain clock name
27 - #clock-cells : Should be 0
28 - reg : Should contain registers location and length
29 - clocks : Should contain phandle + clock-specifier for the parent clock
32 - clock-output-names : Should contain clock name
|
| H A D | imx7ulp-clock.txt | 29 - compatible: Should be "fsl,imx7ulp-scg1".
30 - reg : Should contain registers location and length.
31 - #clock-cells: Should be <1>.
32 - clocks: Should contain the fixed input clocks.
33 - clock-names: Should contain the following clock names:
43 - compatible: Should be one of:
46 - reg : Should contain registers location and length.
47 - #clock-cells: Should be <1>.
48 - clocks: Should contain the fixed input clocks.
49 - clock-names: Should contain the following clock names:
|
| /freebsd/sys/contrib/device-tree/Bindings/phy/ |
| H A D | qcom,usb-hs-phy.txt | 8 Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
18 Definition: Should contain 0
23 Definition: Should contain clock specifier for the reference and sleep
29 Definition: Should contain "ref" and "sleep" for the reference and sleep
35 Definition: Should contain the phy and POR resets
40 Definition: Should contain "phy" and "por" for the phy and POR resets
46 Definition: Should contain a reference to the 3.3V supply
51 Definition: Should contain a reference to the 1.8V supply
56 Definition: Should contain the vbus extcon
61 Definition: Should contain a sequence of ULPI address and value pairs to
|
| /freebsd/sys/contrib/device-tree/Bindings/net/ |
| H A D | imx-dwmac.txt | 9 - compatible: Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
12 - clock-names: Should be "stmmaceth" for the host clock.
13 Should be "pclk" for the MAC apb clock.
14 Should be "ptp_ref" for the MAC timer clock.
15 Should be "tx" for the MAC RGMII TX clock:
16 Should be "mem" for EQOS MEM clock.
19 - interrupt-names: Should contain a list of interrupt names corresponding to
21 Should be "macirq" for the main MAC IRQ
22 Should be "eth_wake_irq" for the IT which wake up system
23 - intf_mode: Should be phandle/offset pair. The phandle to the syscon node which
|
| H A D | qcom,ethqos.txt | 10 - compatible: Should be one of:
16 - reg-names: Should contain register names "stmmaceth", "rgmii"
18 - clocks: Should contain phandle to clocks
20 - clock-names: Should contain clock names "stmmaceth", "pclk",
23 - interrupts: Should contain phandle to interrupts
25 - interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
|
| /freebsd/sys/contrib/device-tree/Bindings/crypto/ |
| H A D | fsl-imx-scc.txt | 4 - compatible : Should be "fsl,imx25-scc".
5 - reg : Should contain register location and length.
6 - interrupts : Should contain interrupt numbers for SCM IRQ and SMN IRQ.
7 - interrupt-names : Should specify the names "scm" and "smn" for the
9 - clocks: Should contain the clock driving the SCC core.
10 - clock-names: Should be set to "ipg".
|
| H A D | atmel-crypto.txt | 8 - compatible : Should be "atmel,at91sam9g46-aes".
9 - reg: Should contain AES registers location and length.
10 - interrupts: Should contain the IRQ line for the AES.
28 - compatible : Should be "atmel,at91sam9g46-tdes".
29 - reg: Should contain TDES registers location and length.
30 - interrupts: Should contain the IRQ line for the TDES.
51 - compatible : Should be "atmel,at91sam9g46-sha".
52 - reg: Should contain SHA registers location and length.
53 - interrupts: Should contain the IRQ line for the SHA.
|
| /freebsd/sys/contrib/device-tree/Bindings/i2c/ |
| H A D | qcom,i2c-qup.txt | 4 - compatible: Should be:
8 - reg: Should contain QUP register address and length.
9 - interrupts: Should contain I2C interrupt.
13 - clock-names: Should contain:
17 - #address-cells: Should be <1> Address cells for i2c device address
18 - #size-cells: Should be <0> as i2c addresses have no size component
21 - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
|
| H A D | i2c-sprd.txt | 4 - compatible: Should be "sprd,sc9860-i2c".
7 - interrupts: Should contain I2C interrupt.
8 - clock-names: Should contain following entries:
12 - clocks: Should contain a clock specifier for each entry in clock-names.
14 - #address-cells: Should be 1 to describe address cells for I2C device address.
15 - #size-cells: Should be 0 means no size cell for I2C device address.
|
| /freebsd/sys/contrib/device-tree/Bindings/mmc/ |
| H A D | sdhci-omap.txt | 8 - compatible: Should be "ti,omap2430-sdhci" for omap2430 controllers
9 Should be "ti,omap3-sdhci" for omap3 controllers
10 Should be "ti,omap4-sdhci" for omap4 and ti81 controllers
11 Should be "ti,omap5-sdhci" for omap5 controllers
12 Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
13 Should be "ti,k2g-sdhci" for K2G
14 Should be "ti,am335-sdhci" for am335x controllers
15 Should be "ti,am437-sdhci" for am437x controllers
18 - pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
|
| /freebsd/sys/contrib/device-tree/Bindings/dma/ |
| H A D | sprd-dma.txt | 6 - compatible: Should be "sprd,sc9860-dma".
7 - reg: Should contain DMA registers location and length.
8 - interrupts: Should contain one interrupt shared by all channel.
11 - dma-channels : Number of DMA channels supported. Should be 32.
12 - clock-names: Should contain the clock of the DMA controller.
13 - clocks: Should contain a clock specifier for each entry in clock-names.
16 - #dma-channels : Number of DMA channels supported. Should be 32.
|
| /freebsd/sys/contrib/device-tree/Bindings/sound/ |
| H A D | mchp-i2s-mcc.txt | 4 - compatible: Should be "microchip,sam9x60-i2smcc".
5 - reg: Should be the physical base address of the controller and the
7 - interrupts: Should contain the interrupt for the controller.
8 - dmas: Should be one per channel name listed in the dma-names property,
14 - clock-names: Should be one of each entry matching the clocks phandles list:
19 - pinctrl-0: Should specify pin control groups used for this controller.
20 - princtrl-names: Should contain only one value - "default".
|
| H A D | qcom,wcd9335.txt | 18 Should be:
24 Definition: Should be ('Device index', 'Instance ID')
35 Should be: "intr1", "intr2"
61 Definition: Should contain a reference to the 1.8V buck supply
66 Definition: Should contain a reference to the 1.8V SIDO buck supply
71 Definition: Should contain a reference to the 1.8V rx supply
76 Definition: Should contain a reference to the 1.8V tx supply
81 Definition: Should contain a reference to the vbat supply
86 Definition: Should contain a reference to the micbias supply
91 Definition: Should contain a reference to the 1.8V io supply
|
| H A D | atmel-i2s.txt | 4 - compatible: Should be "atmel,sama5d2-i2s".
5 - reg: Should be the physical base address of the controller and the
7 - interrupts: Should contain the interrupt for the controller.
8 - dmas: Should be one per channel name listed in the dma-names property,
15 - clock-names: Should be one of each entry matching the clocks phandles list:
21 - pinctrl-0: Should specify pin control groups used for this controller.
22 - princtrl-names: Should contain only one value - "default".
|
| /freebsd/sys/contrib/device-tree/Bindings/display/ |
| H A D | mxsfb.txt | 6 - compatible: Should be "fsl,imx23-lcdif" for i.MX23.
7 Should be "fsl,imx28-lcdif" for i.MX28.
8 Should be "fsl,imx6sx-lcdif" for i.MX6SX.
9 Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
11 - interrupts: Should contain LCDIF interrupt
42 - compatible: Should be "fsl,imx23-lcdif" for i.MX23.
43 Should be "fsl,imx28-lcdif" for i.MX28.
45 - interrupts: Should contain LCDIF interrupts
|
| /freebsd/sys/contrib/device-tree/Bindings/pci/ |
| H A D | qcom,pcie.txt | 65 Definition: Should contain "msi"
91 Definition: Should contain the following entries
97 Definition: Should contain the following entries
105 Definition: Should contain the following entries
113 Definition: Should contain the following entries
123 Definition: Should contain the following entries
133 Definition: Should contain the following entries
143 Definition: Should contain the following entries
152 Definition: Should contain the following entries
164 Definition: Should contain the following entries
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/watchdog/ |
| H A D | atmel-wdt.txt | 13 - interrupts : Should contain WDT interrupt.
14 - atmel,max-heartbeat-sec : Should contain the maximum heartbeat value in
17 - atmel,min-heartbeat-sec : Should contain the minimum heartbeat value in
20 - atmel,watchdog-type : Should be "hardware" or "software". Hardware watchdog
23 - atmel,reset-type : Should be "proc" or "all".
27 - atmel,disable : Should be present if you want to disable the watchdog.
28 - atmel,idle-halt : Should be present if you want to stop the watchdog when
35 - atmel,dbg-halt : Should be present if you want to stop the watchdog when
|
| /freebsd/sys/contrib/device-tree/Bindings/serial/ |
| H A D | qcom,msm-uart.txt | 9 - compatible: Should contain "qcom,msm-uart"
10 - reg: Should contain UART register location and length.
11 - interrupts: Should contain UART interrupt.
12 - clocks: Should contain the core clock.
13 - clock-names: Should be "core".
|