/linux/Documentation/devicetree/bindings/iio/adc/ |
H A D | xlnx,zynqmp-ams.yaml | 28 AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage 29 |1 |Battery voltage measurement, VCC_PSBATT. |Voltage 30 |2 |PL Internal voltage measurement, VCCINT. |Voltage 31 |3 |Block RAM voltage measurement, VCCBRAM. |Voltage 32 |4 |PL Aux voltage measurement, VCCAUX. |Voltage 33 |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage 34 |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage 38 |9 |VCC PS LPD voltage measurement (supply1). |Voltage 39 |10 |VCC PS FPD voltage measurement (supply2). |Voltage 41 |12 |DDR I/O VCC voltage measurement. |Voltage [all …]
|
/linux/Documentation/userspace-api/media/dvb/ |
H A D | frontend-stat-properties.rst | 64 measurement was not complete yet. 83 measurement was not complete yet. 114 measurement was not complete yet. 128 measurement was taken. 133 measurement interval. 142 measurement was not complete yet. 171 measurement was not complete yet. 185 measurement was taken. 190 measurement interval. 199 measurement was not complete yet. [all …]
|
/linux/Documentation/hwmon/ |
H A D | adm9240.rst | 52 microprocessor-based systems, providing measurement and limit comparison 59 measurement. 68 The measurement cycle 70 The adm9240 driver will take a measurement reading no faster than once 72 measurement update rate and will receive cached data from the most 73 recent measurement. 79 DS1780 measurement cycle is about once per second including fan speed. 81 LM81 measurement cycle is about once per 400ms including fan speed. 132 range, this will occur within a few measurement cycles. 144 Voltage (IN) measurement is internally scaled: [all …]
|
H A D | sht3x.rst | 53 2000 0.5 Hz periodic measurement 54 1000 1 Hz periodic measurement 55 500 2 Hz periodic measurement 56 250 4 Hz periodic measurement 57 100 10 Hz periodic measurement 60 In the periodic measure mode, the sensor automatically triggers a measurement 96 for periodic measurement. If the interval is not supported 99 longer measurement duration, lower noise level and
|
H A D | da9052.rst | 26 Channel 0 VDDOUT - measurement of the system voltage 27 Channel 1 ICH - internal battery charger current measurement 29 Channel 3 VBAT - measurement of the battery voltage 36 Channel 9 VBBAT - measurement of the backup battery voltage
|
H A D | ina238.rst | 47 power1_input Power measurement (uW) 51 curr1_input Current measurement (mA) 53 temp1_input Die temperature measurement (mC)
|
H A D | max34440.rst | 90 voltage measurement is enabled for a given channel. Voltage measurement is 91 enabled if currX_crit is set to 0; current measurement is enabled if the 92 attribute is set to a positive value. Power measurement is only enabled if 93 channel 1 (3) is configured for voltage measurement, and channel 2 (4) is 94 configured for current measurement.
|
/linux/tools/testing/selftests/kvm/lib/x86_64/ |
H A D | sev.c | 87 void sev_vm_launch_measure(struct kvm_vm *vm, uint8_t *measurement) in sev_vm_launch_measure() argument 93 launch_measure.uaddr = (__u64)measurement; in sev_vm_launch_measure() 131 void vm_sev_launch(struct kvm_vm *vm, uint32_t policy, uint8_t *measurement) in vm_sev_launch() argument 135 if (!measurement) in vm_sev_launch() 136 measurement = alloca(256); in vm_sev_launch() 138 sev_vm_launch_measure(vm, measurement); in vm_sev_launch()
|
/linux/net/mac80211/ |
H A D | spectmgmt.c | 431 skb_put(skb, 1 + sizeof(msr_report->u.action.u.measurement)); in ieee80211_send_refuse_measurement_request() 433 msr_report->u.action.u.measurement.action_code = in ieee80211_send_refuse_measurement_request() 435 msr_report->u.action.u.measurement.dialog_token = dialog_token; in ieee80211_send_refuse_measurement_request() 437 msr_report->u.action.u.measurement.element_id = WLAN_EID_MEASURE_REPORT; in ieee80211_send_refuse_measurement_request() 438 msr_report->u.action.u.measurement.length = in ieee80211_send_refuse_measurement_request() 441 memset(&msr_report->u.action.u.measurement.msr_elem, 0, in ieee80211_send_refuse_measurement_request() 443 msr_report->u.action.u.measurement.msr_elem.token = request_ie->token; in ieee80211_send_refuse_measurement_request() 444 msr_report->u.action.u.measurement.msr_elem.mode |= in ieee80211_send_refuse_measurement_request() 446 msr_report->u.action.u.measurement.msr_elem.type = request_ie->type; in ieee80211_send_refuse_measurement_request() 463 &mgmt->u.action.u.measurement.msr_elem, in ieee80211_process_measurement_req() [all …]
|
/linux/drivers/s390/char/ |
H A D | uvdevice.c | 108 u8 *measurement, u8 *add_data, in uvio_copy_attest_result_to_user() argument 117 if (copy_to_user(user_buf_meas, measurement, uvio_attest->meas_len)) in uvio_copy_attest_result_to_user() 186 u8 *measurement = NULL; in uvio_attestation() local 206 measurement = kvzalloc(uvio_attest->meas_len, GFP_KERNEL); in uvio_attestation() 207 if (!arcb || !measurement) in uvio_attestation() 220 ret = uvio_build_uvcb_attest(uvcb_attest, arcb, measurement, add_data, uvio_attest); in uvio_attestation() 229 ret = uvio_copy_attest_result_to_user(uvcb_attest, uv_ioctl, measurement, add_data, in uvio_attestation() 233 kvfree(measurement); in uvio_attestation()
|
/linux/Documentation/misc-devices/ |
H A D | apds990x.rst | 20 functionality are highly connected. ALS measurement path must be running 23 ALS produces raw measurement values for two channels: Clear channel 35 selects suitable gain step. After each measurement, reliability of the results 36 is estimated and new measurement is triggered if necessary. 72 RW - measurement rate in Hz 75 RO - supported measurement rates
|
H A D | bh1770glc.rst | 46 so that measurement produces about the expected lux value. 71 RW - measurement rate in Hz 74 RO - supported measurement rates 127 RO - Supported proximity measurement rates in Hz
|
/linux/Documentation/devicetree/bindings/iio/magnetometer/ |
H A D | ti,tmag5273.yaml | 19 on-axis and off-axis angle measurement topologies. The angle calculation is 32 ti,angle-measurement: 35 Enables angle measurement in the selected plane. 71 ti,angle-measurement = "x-z";
|
/linux/security/integrity/ima/ |
H A D | Kconfig | 36 bool "Enable carrying the IMA measurement list across a soft boot" 41 a TPM's quote after a soft boot, the IMA measurement list of the 44 Depending on the IMA policy, the measurement list can grow to 54 measurement list. If unsure, use the default 10. 67 Select the default IMA measurement template. 69 The original 'ima' measurement list template contains a 71 limited to 255 characters. The 'ima-ng' measurement list 91 Select the default hash algorithm used for the measurement 148 This option enables local measurement integrity appraisal. 150 attribute containing the file hash measurement. To protect [all …]
|
/linux/Documentation/admin-guide/device-mapper/ |
H A D | dm-ima.rst | 52 Then IMA ASCII measurement log has the following format: 103 The IMA measurement log has the following format for 'dm_table_load': 156 Then IMA ASCII measurement log will have the following entry: 173 The IMA measurement log has the following format for 'dm_device_resume': 197 then IMA ASCII measurement log will have an entry with: 211 The IMA measurement log has the following format for 'dm_device_remove': 235 then IMA ASCII measurement log will have the following entry: 252 The IMA measurement log has the following format for 'dm_table_clear': 269 then IMA ASCII measurement log will have an entry with: 302 then IMA ASCII measurement log will have an entry with: [all …]
|
/linux/drivers/hwmon/ |
H A D | chipcap2.c | 419 long *hyst, long *measurement) in cc2_read_hyst_and_measure() argument 434 ret = cc2_read_measurement(data, hwmon_humidity, measurement); in cc2_read_hyst_and_measure() 517 long measurement, min_hyst; in cc2_humidity_min_alarm_status() local 521 &measurement); in cc2_humidity_min_alarm_status() 526 *val = (measurement < min_hyst) ? 1 : 0; in cc2_humidity_min_alarm_status() 537 long measurement, max_hyst; in cc2_humidity_max_alarm_status() local 541 &measurement); in cc2_humidity_max_alarm_status() 546 *val = (measurement > max_hyst) ? 1 : 0; in cc2_humidity_max_alarm_status()
|
/linux/Documentation/devicetree/bindings/sound/ |
H A D | cs43130.txt | 29 Boolean, define to enable headphone DC impedance measurement. 32 Boolean, define to enable headphone AC impedance measurement. 33 DC impedance must also be enabled for AC impedance measurement.
|
/linux/Documentation/userspace-api/media/v4l/ |
H A D | dev-touch.rst | 30 A touch input may be determined by comparing the raw capacitance measurement to 31 a no-touch reference (or "baseline") measurement: 35 The reference measurement takes account of variations in the capacitance across
|
/linux/Documentation/devicetree/bindings/iio/temperature/ |
H A D | melexis,mlx90632.yaml | 18 Celsius with relative error of measurement below 1 degree Celsius in 34 Celsius with relative error of measurement 2 degree Celsius in 36 degree Celsius for human body measurement applications. Since it can
|
/linux/tools/testing/selftests/kvm/include/x86_64/ |
H A D | sev.h | 31 void sev_vm_launch_measure(struct kvm_vm *vm, uint8_t *measurement); 36 void vm_sev_launch(struct kvm_vm *vm, uint32_t policy, uint8_t *measurement);
|
/linux/Documentation/ABI/testing/ |
H A D | sysfs-bus-iio-chemical-sunrise-co2 | 29 - 'error_no_measurement': Cleared at first measurement 31 - 'error_measurement_timeout': Unable to complete measurement
|
/linux/Documentation/security/tpm/ |
H A D | tpm_event_log.rst | 26 are accompanied by a measurement log. While not trusted on their own, 27 the measurement log contains a richer set of information than do the PCR 29 measurement log."
|
/linux/Documentation/driver-api/iio/ |
H A D | intro.rst | 13 or temperature measurement. :doc:`Input <../input>` is, as its name suggests, 24 * inertial measurement units (IMUs)
|
/linux/drivers/greybus/ |
H A D | interface.c | 461 u32 measurement; in voltage_now_show() local 465 &measurement); in voltage_now_show() 471 return sprintf(buf, "%u\n", measurement); in voltage_now_show() 480 u32 measurement; in current_now_show() local 484 &measurement); in current_now_show() 490 return sprintf(buf, "%u\n", measurement); in current_now_show() 499 u32 measurement; in power_now_show() local 503 &measurement); in power_now_show() 509 return sprintf(buf, "%u\n", measurement); in power_now_show()
|
/linux/Documentation/security/ |
H A D | IMA-templates.rst | 26 which information should be included in the measurement list; a template 32 measurement entries. Defining a new template descriptor requires 41 mechanism) to generate a new measurement entry by using the template 48 (pointer to allocated data and data length) in the measurement entry structure. 103 To specify the template descriptor to be used to generate measurement entries,
|