xref: /netbsd/sys/external/bsd/dwc2/dwc2.h (revision 64c87ee3)
1 /*	$NetBSD: dwc2.h,v 1.12 2022/03/18 23:32:59 riastradh Exp $	*/
2 
3 /*-
4  * Copyright (c) 2013 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Nick Hudson
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 #ifndef _EXTERNAL_BSD_DWC2_DWC2_H_
33 #define _EXTERNAL_BSD_DWC2_DWC2_H_
34 
35 #include <sys/param.h>
36 
37 #include <sys/callout.h>
38 #include <sys/kernel.h>
39 #include <sys/proc.h>
40 #include <sys/workqueue.h>
41 
42 #include <linux/list.h>
43 #include <linux/workqueue.h>
44 #include <linux/bug.h>
45 
46 #include "opt_usb.h"
47 // #define VERBOSE_DEBUG
48 // #define DWC2_DUMP_FRREM
49 // #define CONFIG_USB_DWC2_TRACK_MISSED_SOFS
50 
51 #define CONFIG_USB_DWC2_HOST		1
52 #define CONFIG_USB_DWC2_DUAL_ROLE	0
53 #define CONFIG_USB_DWC2_PERIPHERAL	0
54 
55 typedef int irqreturn_t;
56 #define	IRQ_NONE 0
57 #define IRQ_HANDLED 1
58 
59 #define	u8	uint8_t
60 #define	u16	uint16_t
61 #define	s16	int16_t
62 #define	u32	uint32_t
63 #define	u64	uint64_t
64 
65 #define	dma_addr_t	bus_addr_t
66 
67 #define DWC2_READ_4(hsotg, reg) \
68     bus_space_read_4((hsotg)->hsotg_sc->sc_iot, (hsotg)->hsotg_sc->sc_ioh, (reg))
69 #define DWC2_WRITE_4(hsotg, reg, data)  \
70     bus_space_write_4((hsotg)->hsotg_sc->sc_iot, (hsotg)->hsotg_sc->sc_ioh, (reg), (data));
71 
72 #ifdef DWC2_DEBUG
73 extern int dwc2debug;
74 
75 #define	dev_info(d,fmt,...) do {			\
76 	printf("%s: " fmt, device_xname(d), 		\
77 	    ## __VA_ARGS__);				\
78 } while (0)
79 #define	dev_warn(d,fmt,...) do {			\
80 	printf("%s: " fmt, device_xname(d), 		\
81 	    ## __VA_ARGS__);				\
82 } while (0)
83 #define	dev_err(d,fmt,...) do {				\
84 	printf("%s: " fmt, device_xname(d), 		\
85 	    ## __VA_ARGS__);				\
86 } while (0)
87 #define	dev_dbg(d,fmt,...) do {				\
88 	if (dwc2debug >= 1) {				\
89 	    printf("%s: " fmt, device_xname(d), 	\
90 		    ## __VA_ARGS__);			\
91 	}						\
92 } while (0)
93 #define	dev_vdbg(d,fmt,...) do {			\
94 	if (dwc2debug >= 2) {				\
95 	    printf("%s: " fmt, device_xname(d), 	\
96 		    ## __VA_ARGS__);			\
97 	}						\
98 } while (0)
99 #else
100 #define	dev_info(...) do { } while (0)
101 #define	dev_warn(...) do { } while (0)
102 #define	dev_err(...) do { } while (0)
103 #define	dev_dbg(...) do { } while (0)
104 #define	dev_vdbg(...) do { } while (0)
105 #endif
106 
107 #define jiffies			getticks()
108 #define msecs_to_jiffies	mstohz
109 
110 enum usb_otg_state {
111 	OTG_STATE_RESERVED = 0,
112 
113 	OTG_STATE_A_HOST,
114 	OTG_STATE_A_PERIPHERAL,
115 	OTG_STATE_A_SUSPEND,
116 	OTG_STATE_B_HOST,
117 	OTG_STATE_B_PERIPHERAL,
118 };
119 
120 #define usleep_range(l, u)	do { DELAY(u); } while (0)
121 
122 #define spinlock_t		kmutex_t
123 #define spin_lock_init(lock)	mutex_init(lock, MUTEX_DEFAULT, IPL_VM)
124 #define	spin_lock(l)		do { mutex_spin_enter(l); } while (0)
125 #define	spin_unlock(l)		do { mutex_spin_exit(l); } while (0)
126 
127 #define	spin_lock_irqsave(l, f)		\
128 	do { mutex_spin_enter(l); (void)(f); } while (0)
129 
130 #define	spin_unlock_irqrestore(l, f)	\
131 	do { mutex_spin_exit(l); (void)(f); } while (0)
132 
133 #define	IRQ_RETVAL(r)	(r)
134 
135 #define	USB_ENDPOINT_XFER_CONTROL	UE_CONTROL		/* 0 */
136 #define	USB_ENDPOINT_XFER_ISOC		UE_ISOCHRONOUS		/* 1 */
137 #define	USB_ENDPOINT_XFER_BULK		UE_BULK			/* 2 */
138 #define	USB_ENDPOINT_XFER_INT		UE_INTERRUPT		/* 3 */
139 
140 #define USB_DIR_IN			UE_DIR_IN
141 #define USB_DIR_OUT			UE_DIR_OUT
142 
143 #define	USB_PORT_FEAT_CONNECTION	UHF_PORT_CONNECTION
144 #define	USB_PORT_FEAT_ENABLE		UHF_PORT_ENABLE
145 #define	USB_PORT_FEAT_SUSPEND		UHF_PORT_SUSPEND
146 #define	USB_PORT_FEAT_OVER_CURRENT	UHF_PORT_OVER_CURRENT
147 #define	USB_PORT_FEAT_RESET		UHF_PORT_RESET
148 // #define	USB_PORT_FEAT_L1		5	/* L1 suspend */
149 #define	USB_PORT_FEAT_POWER		UHF_PORT_POWER
150 #define	USB_PORT_FEAT_LOWSPEED		UHF_PORT_LOW_SPEED
151 #define	USB_PORT_FEAT_C_CONNECTION	UHF_C_PORT_CONNECTION
152 #define	USB_PORT_FEAT_C_ENABLE		UHF_C_PORT_ENABLE
153 #define	USB_PORT_FEAT_C_SUSPEND		UHF_C_PORT_SUSPEND
154 #define	USB_PORT_FEAT_C_OVER_CURRENT	UHF_C_PORT_OVER_CURRENT
155 #define	USB_PORT_FEAT_C_RESET		UHF_C_PORT_RESET
156 #define	USB_PORT_FEAT_TEST              UHF_PORT_TEST
157 #define	USB_PORT_FEAT_INDICATOR         UHF_PORT_INDICATOR
158 #define	USB_PORT_FEAT_C_PORT_L1         UHF_C_PORT_L1
159 
160 #define	C_HUB_LOCAL_POWER		UHF_C_HUB_LOCAL_POWER
161 #define	C_HUB_OVER_CURRENT		UHF_C_HUB_OVER_CURRENT
162 
163 #define USB_REQ_GET_STATUS		UR_GET_STATUS
164 #define USB_REQ_CLEAR_FEATURE		UR_CLEAR_FEATURE
165 #define USB_REQ_SET_FEATURE		UR_SET_FEATURE
166 #define USB_REQ_GET_DESCRIPTOR		UR_GET_DESCRIPTOR
167 
168 #define	ClearHubFeature		((UT_WRITE_CLASS_DEVICE << 8) | USB_REQ_CLEAR_FEATURE)
169 #define	ClearPortFeature	((UT_WRITE_CLASS_OTHER << 8) | USB_REQ_CLEAR_FEATURE)
170 #define	GetHubDescriptor	((UT_READ_CLASS_DEVICE << 8) | USB_REQ_GET_DESCRIPTOR)
171 #define	GetHubStatus		((UT_READ_CLASS_DEVICE << 8) | USB_REQ_GET_STATUS)
172 #define	GetPortStatus		((UT_READ_CLASS_OTHER << 8) | USB_REQ_GET_STATUS)
173 #define	SetHubFeature		((UT_WRITE_CLASS_DEVICE << 8) | USB_REQ_SET_FEATURE)
174 #define	SetPortFeature		((UT_WRITE_CLASS_OTHER << 8) | USB_REQ_SET_FEATURE)
175 
176 #define	USB_PORT_STAT_CONNECTION	UPS_CURRENT_CONNECT_STATUS
177 #define	USB_PORT_STAT_ENABLE		UPS_PORT_ENABLED
178 #define	USB_PORT_STAT_SUSPEND		UPS_SUSPEND
179 #define	USB_PORT_STAT_OVERCURRENT	UPS_OVERCURRENT_INDICATOR
180 #define	USB_PORT_STAT_RESET		UPS_RESET
181 #define	USB_PORT_STAT_L1		UPS_PORT_L1
182 #define	USB_PORT_STAT_POWER		UPS_PORT_POWER
183 #define	USB_PORT_STAT_LOW_SPEED		UPS_LOW_SPEED
184 #define	USB_PORT_STAT_HIGH_SPEED        UPS_HIGH_SPEED
185 #define	USB_PORT_STAT_TEST              UPS_PORT_TEST
186 #define	USB_PORT_STAT_INDICATOR         UPS_PORT_INDICATOR
187 
188 #define	USB_PORT_STAT_C_CONNECTION	UPS_C_CONNECT_STATUS
189 #define	USB_PORT_STAT_C_ENABLE		UPS_C_PORT_ENABLED
190 #define	USB_PORT_STAT_C_SUSPEND		UPS_C_SUSPEND
191 #define	USB_PORT_STAT_C_OVERCURRENT	UPS_C_OVERCURRENT_INDICATOR
192 #define	USB_PORT_STAT_C_RESET		UPS_C_PORT_RESET
193 #define	USB_PORT_STAT_C_L1		UPS_C_PORT_L1
194 
195 #define	USB_DT_HUB			UDESC_HUB
196 
197 /* See USB 2.0 spec Table 11-13, offset 3 */
198 #define HUB_CHAR_LPSM		UHD_PWR
199 #define HUB_CHAR_COMMON_LPSM	UHD_PWR_GANGED
200 #define HUB_CHAR_INDV_PORT_LPSM	UHD_PWR_INDIVIDUAL
201 #define HUB_CHAR_NO_LPSM	UHD_PWR_NO_SWITCH
202 
203 #define HUB_CHAR_COMPOUND	UHD_COMPOUND
204 
205 #define HUB_CHAR_OCPM		UHD_OC
206 #define HUB_CHAR_COMMON_OCPM	UHD_OC_GLOBAL
207 #define HUB_CHAR_INDV_PORT_OCPM	UHD_OC_INDIVIDUAL
208 #define HUB_CHAR_NO_OCPM	UHD_OC_NONE
209 
210 #define HUB_CHAR_TTTT		UHD_TT_THINK
211 #define HUB_CHAR_PORTIND	UHD_PORT_IND
212 
213 enum usb_dr_mode {
214 	USB_DR_MODE_UNKNOWN,
215 	USB_DR_MODE_HOST,
216 	USB_DR_MODE_PERIPHERAL,
217 	USB_DR_MODE_OTG,
218 };
219 
220 struct usb_phy;
221 struct usb_hcd;
222 
223 static inline int
usb_phy_set_suspend(struct usb_phy * x,int suspend)224 usb_phy_set_suspend(struct usb_phy *x, int suspend)
225 {
226 
227 	return 0;
228 }
229 
230 static inline void
usb_hcd_resume_root_hub(struct usb_hcd * hcd)231 usb_hcd_resume_root_hub(struct usb_hcd *hcd)
232 {
233 
234 	return;
235 }
236 
237 static inline int
usb_disabled(void)238 usb_disabled(void)
239 {
240 
241 	return 0;
242 }
243 
244 static inline void
udelay(unsigned long usecs)245 udelay(unsigned long usecs)
246 {
247 
248 	DELAY(usecs);
249 }
250 
251 static inline void
ndelay(unsigned long nsecs)252 ndelay(unsigned long nsecs)
253 {
254 
255 	DELAY(nsecs / 1000);
256 }
257 
258 static inline void
msleep(unsigned int msec)259 msleep(unsigned int msec)
260 {
261 	if (cold ||
262 	    ((hz < 1000) && (msec < (1000/hz))))
263 		udelay(msec * 1000);
264 	else
265 		(void)kpause("mdelay", false, mstohz(msec), NULL);
266 }
267 
268 #define	EREMOTEIO	EIO
269 #define	ECOMM		EIO
270 #define	ENOTSUPP	ENOTSUP
271 
272 #define NS_TO_US(ns)	((ns + 500L) / 1000L)
273 
274 #define USB_RESUME_TIMEOUT	40 /* ms */
275 
276 #endif
277