1# Print profiles for the FLSun Delta printers. 2## 3# Author: https://github.com/Foxies-CSTL/PrusaSlicer 4## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/5582 5[vendor] 6# Vendor name will be shown by the Config Wizard. 7name = FLSun 8# Configuration version of this file. Config file will only be installed, if the config_version differs. 9# This means, the server may force the PrusaSlicer configuration to be downgraded. 10config_version = 0.0.1 11# Where to get the updates from? 12config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/ 13# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% 14 15# The printer models will be shown by the Configuration Wizard in this order, 16# also the first model installed & the first nozzle installed will be activated after install. 17# Printer model name will be shown by the installation wizard. 18 19[printer_model:QQSP] 20name = FLSun QQS Pro 21variants = 0.4; 0.6 22technology = FFF 23bed_model = QQSP_bed.stl 24bed_texture = QQSP.svg 25default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN 26 27[printer_model:Q5] 28name = FLSun Q5 29variants = 0.4; 0.6 30technology = FFF 31bed_model = Q5_bed.stl 32bed_texture = Q5.svg 33default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN 34 35######################################### 36###### begin Common print presets ####### 37######################################### 38 39# Common print preset 40[print:*common_flsunq*] 41avoid_crossing_perimeters = 1 42avoid_crossing_perimeters_max_detour = 0 43bottom_solid_min_thickness = 0.5 44bridge_acceleration = 800 45bridge_angle = 0 46bridge_flow_ratio = 0.8 47bridge_speed = 30 48brim_width = 0 49clip_multipart_objects = 1 50compatible_printers = 51complete_objects = 0 52default_acceleration = 800 53dont_support_bridges = 1 54elefant_foot_compensation = 0.2 55ensure_vertical_shell_thickness = 1 56external_fill_pattern = rectilinear 57external_perimeters_first = 0 58external_perimeter_extrusion_width = 0.45 59extra_perimeters = 0 60extruder_clearance_height = 45 61extruder_clearance_radius = 45 62extrusion_width = 0.45 63fill_angle = 45 64fill_density = 15% 65fill_pattern = gyroid 66first_layer_acceleration = 800 67first_layer_extrusion_width = 0.42 68first_layer_height = 0.2 69first_layer_speed = 20 70gap_fill_speed = 40 71gcode_comments = 0 72infill_acceleration = 800 73infill_every_layers = 1 74infill_extruder = 1 75infill_extrusion_width = 0.45 76infill_first = 0 77infill_only_where_needed = 0 78infill_overlap = 25% 79interface_shells = 0 80ironing = 0 81ironing_flowrate = 15% 82ironing_spacing = 0.1 83ironing_speed = 15 84ironing_type = top 85max_print_speed = 200 86max_volumetric_extrusion_rate_slope_negative = 0 87max_volumetric_extrusion_rate_slope_positive = 0 88max_volumetric_speed = 0 89min_skirt_length = 4 90notes = 91overhangs = 1 92only_retract_when_crossing_perimeters = 0 93ooze_prevention = 0 94output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gco 95perimeters = 3 96perimeter_acceleration = 800 97perimeter_extruder = 1 98perimeter_extrusion_width = 0.45 99perimeter_speed = 45 100post_process = 101print_settings_id = 102raft_layers = 0 103resolution = 0 104seam_position = nearest 105single_extruder_multi_material_priming = 0 106skirts = 2 107skirt_distance = 5 108skirt_height = 1 109small_perimeter_speed = 25 110solid_infill_below_area = 0 111solid_infill_every_layers = 0 112solid_infill_extruder = 1 113solid_infill_extrusion_width = 0.45 114spiral_vase = 0 115standby_temperature_delta = -5 116support_material = 1 117support_material_auto = 0 118support_material_extruder = 1 119support_material_extrusion_width = 0.38 120support_material_interface_extruder = 0 121support_material_angle = 0 122support_material_buildplate_only = 0 123support_material_enforce_layers = 0 124support_material_contact_distance = 0.2 125support_material_interface_contact_loops = 0 126support_material_interface_layers = 2 127support_material_interface_spacing = 0.2 128support_material_interface_speed = 100% 129support_material_pattern = rectilinear 130support_material_spacing = 2.5 131support_material_speed = 60 132support_material_synchronize_layers = 0 133support_material_threshold = 45 134support_material_with_sheath = 0 135support_material_xy_spacing = 60% 136thin_walls = 0 137top_infill_extrusion_width = 0.4 138top_solid_infill_speed = 40 139top_solid_min_thickness = 0.6 140travel_speed = 150 141wipe_tower = 0 142wipe_tower_bridging = 10 143wipe_tower_rotation_angle = 0 144wipe_tower_width = 60 145wipe_tower_x = 170 146wipe_tower_y = 140 147xy_size_compensation = 0 148 149## QQS 150 151[print:*QQSP*] 152bridge_acceleration = 1000 153default_acceleration = 1500 154first_layer_acceleration = 1000 155infill_acceleration = 800 156max_print_speed = 200 157perimeter_acceleration = 800 158 159## Q5 160 161[print:*Q5*] 162bridge_acceleration = 1000 163default_acceleration = 800 164first_layer_acceleration = 800 165infill_acceleration = 1000 166max_print_speed = 150 167perimeter_acceleration = 800 168 169# Print parameters common to a 0.6mm diameter nozzle. 170 171[print:*0.6nozzleFLSUN*] 172bridge_acceleration = 1000 173bridge_flow_ratio = 0.95 174bridge_speed = 25 175default_acceleration = 1000 176external_perimeter_extrusion_width = 0.65 177extrusion_width = 0.65 178first_layer_acceleration = 1000 179first_layer_extrusion_width = 0.65 180fill_density = 15% 181fill_pattern = gyroid 182infill_acceleration = 1000 183infill_extrusion_width = 0.68 184perimeter_acceleration = 800 185perimeter_extrusion_width = 0.65 186solid_infill_extrusion_width = 0.68 187support_material_speed = 40 188support_material_contact_distance = 0.15 189support_material_extrusion_width = 0.55 190support_material_xy_spacing = 80% 191top_infill_extrusion_width = 0.6 192travel_speed = 150 193output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{print_time}.gco 194 195 196# XXXXXXXXXXXXXXXXXXXX 197# XXX--- 0.08mm ---XXX 198# XXXXXXXXXXXXXXXXXXXX 199 200[print:*0.08mm_flsunq*] 201inherits = *common_flsunq* 202bottom_solid_layers = 10 203bridge_flow_ratio = 0.7 204layer_height = 0.08 205support_material_contact_distance = 0.06 206support_material_spacing = 1.5 207top_solid_layers = 12 208 209[print:0.08mm DETAIL @FLSUN] 210inherits = *0.08mm_flsunq*; *QQSP* 211compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 212bridge_acceleration = 200 213bridge_speed = 20 214external_perimeter_speed = 70% 215first_layer_acceleration = 500 216first_layer_speed = 40% 217gap_fill_speed = 20 218infill_acceleration = 800 219infill_speed = 40 220max_print_speed = 80 221perimeter_acceleration = 300 222perimeter_speed = 30 223small_perimeter_speed = 70% 224solid_infill_speed = 95% 225support_material_speed = 40 226top_solid_infill_speed = 60% 227 228# XXXXXXXXXXXXXXXXXXXX 229# XXX--- 0.15mm ---XXX 230# XXXXXXXXXXXXXXXXXXXX 231 232[print:*0.15mm_vase_flsunq*] 233inherits = *common_flsunq* 234avoid_crossing_perimeters = 1 235bottom_solid_min_thickness = 0.5 236bridge_flow_ratio = 0.9 237elefant_foot_compensation = 0.15 238ensure_vertical_shell_thickness = 1 239external_perimeter_extrusion_width = 0.9 240extra_perimeters = 1 241extrusion_width = 0.9 242first_layer_acceleration = 1000 243first_layer_height = 0.3 244first_layer_extrusion_width = 0.9 245first_layer_speed = 20 246fill_density = 0% 247infill_extrusion_width = 0.9 248ironing = 0 249layer_height = 0.15 250min_skirt_length = 4 251max_print_speed = 100 252only_retract_when_crossing_perimeters = 0 253perimeters = 1 254perimeter_extrusion_width = 0.9 255seam_position = aligned 256slice_closing_radius = 0.049 257solid_infill_extrusion_width = 0.6 258spiral_vase = 1 259support_material = 0 260top_solid_infill_speed = 40% 261top_solid_min_thickness = 0.6 262thin_walls = 0 263top_fill_pattern = rectilinear 264top_solid_layers = 0 265 266[print:0.15mm VASE @FLSUN] 267inherits = *0.15mm_vase_flsunq* 268compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 269bottom_solid_layers = 5 270external_perimeter_speed = 50% 271gap_fill_speed = 40 272infill_speed = 100 273perimeter_speed = 80 274small_perimeter_speed = 25% 275solid_infill_speed = 33% 276 277[print:0.15mm VASE SPEED @FLSUN] 278inherits = *0.15mm_vase_flsunq* 279compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 280bridge_speed = 80 281bottom_solid_layers = 3 282external_perimeter_speed = 60% 283gap_fill_speed = 30 284infill_speed = 80 285perimeter_speed = 90 286small_perimeter_speed = 50% 287solid_infill_speed = 80% 288 289# XXXXXXXXXXXXXXXXXXXX 290# XXX--- 0.16mm ---XXX 291# XXXXXXXXXXXXXXXXXXXX 292 293[print:*0.16mm_flsunq*] 294inherits = *common_flsunq* 295bottom_solid_layers = 5 296bridge_flow_ratio = 0.9 297layer_height = 0.16 298support_material_contact_distance = 0.12 299top_solid_layers = 6 300 301[print:0.16mm QUALITY @FLSUN] 302inherits = *0.16mm_flsunq*; *QQSP* 303compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 304external_perimeter_speed = 50% 305fill_density = 15% 306fill_pattern = gyroid 307infill_speed = 80 308ironing = 0 309perimeter_speed = 90 310small_perimeter_speed = 25% 311solid_infill_speed = 50% 312top_solid_infill_speed = 30% 313 314[print:0.16mm SPEED @FLSUN] 315inherits = *0.16mm_flsunq*; *QQSP* 316compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 317external_perimeter_speed = 50% 318infill_speed = 120 319perimeter_speed = 60 320small_perimeter_speed = 25% 321solid_infill_speed = 85% 322top_solid_infill_speed = 30% 323 324[print:0.16mm DETAIL @0.6 nozzle FLSUN] 325inherits = *0.16mm_flsunq*; *0.6nozzleFLSUN* 326# alias = 0.16mm DETAIL 327compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6 328external_perimeter_speed = 35 329infill_speed = 70 330max_print_speed = 80 331perimeter_speed = 40 332solid_infill_speed = 60 333top_solid_infill_speed = 45 334infill_extrusion_width = 0.65 335solid_infill_extrusion_width = 0.65 336 337# XXXXXXXXXXXXXXXXXXXX 338# XXX--- 0.20mm ---XXX 339# XXXXXXXXXXXXXXXXXXXX 340 341[print:*0.20mm_flsunq*] 342inherits = *common_flsunq* 343bottom_solid_layers = 4 344bridge_flow_ratio = 0.95 345layer_height = 0.20 346support_material_contact_distance = 0.2 347top_solid_layers = 5 348 349[print:0.20mm QUALITY @FLSUN] 350inherits = *0.20mm_flsunq*; *QQSP* 351avoid_crossing_perimeters = 1 352bridge_speed = 60 353compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 354external_perimeter_speed = 50% 355fill_density = 15% 356gap_fill_speed = 30 357infill_speed = 80 358ironing = 0 359ironing_speed = 20 360perimeter_speed = 50 361small_perimeter_speed = 85% 362solid_infill_speed = 90% 363thin_walls = 0 364top_solid_infill_speed = 50% 365 366[print:0.20mm DETAIL @0.6 nozzle FLSUN] 367inherits = *0.20mm_flsunq*; *0.6nozzleFLSUN* 368# alias = 0.20mm DETAIL 369compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6 370external_perimeter_speed = 35 371infill_speed = 70 372max_print_speed = 80 373perimeter_speed = 45 374solid_infill_speed = 60 375top_solid_infill_speed = 45 376infill_extrusion_width = 0.65 377solid_infill_extrusion_width = 0.65 378 379[print:0.20mm SPEED @FLSUN] 380inherits = *0.20mm_flsunq*; *QQSP* 381compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 382external_perimeter_speed = 50 383extra_perimeters = 1 384first_layer_speed = 35 385infill_speed = 90 386perimeter_speed = 60 387small_perimeter_speed = 50% 388solid_infill_speed = 85% 389top_solid_infill_speed = 40% 390 391# XXXXXXXXXXXXXXXXXXXX 392# XXX--- 0.24mm ---XXX 393# XXXXXXXXXXXXXXXXXXXX 394 395[print:*0.24mm_flsunq*] 396inherits = *common_flsunq* 397bottom_solid_layers = 4 398bridge_flow_ratio = 0.95 399layer_height = 0.24 400support_material_contact_distance = 0.18 401top_solid_layers = 4 402 403[print:0.24mm DRAFT @FLSUN] 404inherits = *0.24mm_flsunq*; *QQSP* 405compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 406external_perimeter_speed = 50% 407first_layer_speed = 20% 408infill_speed = 120 409perimeter_speed = 60 410small_perimeter_speed = 50% 411solid_infill_speed = 95% 412top_solid_infill_speed = 50% 413 414# XXXXXXXXXXXXXXXXXXXX 415# XXX--- 0.30mm ---XXX 416# XXXXXXXXXXXXXXXXXXXX 417 418[print:*0.30mm_flsunq*] 419inherits = *common_flsunq* 420bottom_solid_layers = 3 421bridge_flow_ratio = 0.95 422external_perimeter_extrusion_width = 0.6 423extrusion_width = 0.5 424infill_extrusion_width = 0.5 425layer_height = 0.30 426perimeter_extrusion_width = 0.5 427solid_infill_extrusion_width = 0.5 428support_material_contact_distance = 0.22 429top_infill_extrusion_width = 0.45 430top_solid_layers = 4 431 432[print:0.30mm QUALITY @0.6 nozzle FLSUN] 433inherits = *0.30mm_flsunq*; *0.6nozzleFLSUN* 434# alias = 0.30mm QUALITY 435compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6 436external_perimeter_speed = 35 437infill_speed = 90 438max_print_speed = 100 439perimeter_speed = 45 440solid_infill_speed = 65 441top_solid_infill_speed = 45 442external_perimeter_extrusion_width = 0.68 443perimeter_extrusion_width = 0.68 444 445[print:0.30mm SPEED @FLSUN] 446inherits = *0.30mm_flsunq*; *QQSP* 447compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4 448external_perimeter_speed = 50% 449first_layer_speed = 20% 450infill_speed = 120 451perimeter_speed = 80 452small_perimeter_speed = 50% 453solid_infill_speed = 85% 454top_solid_infill_speed = 50% 455 456# XXXXXXXXXXXXXXXXXXXX 457# XXX--- 0.35mm ---XXX 458# XXXXXXXXXXXXXXXXXXXX 459 460[print:*0.35mm_flsunq*] 461inherits = *common_flsunq* 462bottom_solid_layers = 3 463external_perimeter_extrusion_width = 0.6 464external_perimeter_speed = 40 465first_layer_extrusion_width = 0.75 466layer_height = 0.35 467perimeter_extrusion_width = 0.65 468solid_infill_extrusion_width = 0.65 469solid_infill_speed = 60 470top_solid_infill_speed = 50 471top_solid_layers = 4 472 473[print:0.35mm SPEED @0.6 nozzle FLSUN] 474inherits = *0.35mm_flsunq*; *0.6nozzleFLSUN* 475# alias = 0.35mm SPEED 476compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6 477external_perimeter_speed = 45 478infill_speed = 100 479max_print_speed = 120 480perimeter_speed = 65 481solid_infill_speed = 60 482top_solid_infill_speed = 45 483external_perimeter_extrusion_width = 0.68 484perimeter_extrusion_width = 0.68 485 486# XXXXXXXXXXXXXXXXXXXX 487# XXX--- 0.40mm ---XXX 488# XXXXXXXXXXXXXXXXXXXX 489 490[print:*0.40mm_flsunq*] 491inherits = *common_flsunq* 492bottom_solid_layers = 3 493external_perimeter_extrusion_width = 0.6 494external_perimeter_speed = 40 495first_layer_extrusion_width = 0.65 496infill_acceleration = 2000 497infill_speed = 60 498layer_height = 0.4 499perimeter_acceleration = 800 500perimeter_extrusion_width = 0.65 501perimeter_speed = 50 502solid_infill_extrusion_width = 0.65 503solid_infill_speed = 60 504top_solid_infill_speed = 40 505top_solid_layers = 4 506 507[print:0.40mm DRAFT @0.6 nozzle FLSUN] 508inherits = *0.40mm_flsunq*; *0.6nozzleFLSUN* 509# alias = 0.40mm DRAFT 510compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6 511external_perimeter_speed = 60 512infill_speed = 100 513max_print_speed = 120 514perimeter_speed = 60 515solid_infill_speed = 60 516top_solid_infill_speed = 60 517external_perimeter_extrusion_width = 0.68 518perimeter_extrusion_width = 0.68 519infill_extrusion_width = 0.68 520solid_infill_extrusion_width = 0.68 521 522######################################### 523########### end print presets ########### 524######################################### 525 526######################################### 527######## begin filament presets ######### 528######################################### 529 530# Common filament preset 531[filament:*common_flsunq*] 532cooling = 0 533compatible_printers = 534compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ 535end_filament_gcode = "; Filament-specific end gcode" 536extrusion_multiplier = 1 537filament_cost = 0 538filament_density = 0 539filament_diameter = 1.75 540filament_notes = "" 541filament_settings_id = "" 542filament_soluble = 0 543min_fan_speed = 20 544min_print_speed = 15 545slowdown_below_layer_time = 15 546start_filament_gcode = "; Filament gcode\n;M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.22{endif} ; Linear Advance 1.5\n" 547 548[filament:*PLA_flsunq*] 549inherits = *common_flsunq* 550bed_temperature = 60 551bridge_fan_speed = 95 552cooling = 1 553disable_fan_first_layers = 1 554fan_always_on = 1 555fan_below_layer_time = 100 556filament_colour = #FF3232 557filament_density = 1.24 558filament_deretract_speed = 30 559filament_retract_length = 3 560filament_retract_lift = nil 561filament_retract_speed = 30 562filament_max_volumetric_speed = 10 563filament_type = PLA 564filament_wipe = nil 565first_layer_bed_temperature = 60 566first_layer_temperature = 205 567max_fan_speed = 90 568min_fan_speed = 50 569temperature = 200 570 571[filament:*PLA_VASE_flsunq*] 572inherits = *PLA_flsunq* 573bridge_fan_speed = 100 574disable_fan_first_layers = 3 575fan_below_layer_time = 60 576max_fan_speed = 100 577min_fan_speed = 35 578min_print_speed = 10 579slowdown_below_layer_time = 5 580 581[filament:*SPLA_flsunq*] 582inherits = *common_flsunq* 583bed_temperature = 80 584bridge_fan_speed = 100 585cooling = 1 586disable_fan_first_layers = 1 587fan_always_on = 1 588fan_below_layer_time = 100 589filament_colour = #008000 590filament_density = 1.24 591filament_deretract_speed = 70 592filament_max_volumetric_speed = 8 593filament_retract_length = 7.5 594filament_retract_lift = nil 595filament_retract_speed = 70 596filament_type = PLA 597filament_wipe = nil 598first_layer_bed_temperature = 80 599first_layer_temperature = 230 600max_fan_speed = 70 601min_fan_speed = 50 602temperature = 215 603 604[filament:*PET_flsunq*] 605inherits = *common_flsunq* 606bed_temperature = 80 607bridge_fan_speed = 100 608cooling = 1 609disable_fan_first_layers = 3 610fan_always_on = 1 611fan_below_layer_time = 20 612filament_colour = #FFFFFF 613filament_density = 1.27 614filament_deretract_speed = 25 615filament_max_volumetric_speed = 8 616filament_retract_length = 4 617filament_retract_lift = 0.2 618filament_retract_speed = 45 619filament_type = PETG 620filament_wipe = 1 621first_layer_bed_temperature =80 622first_layer_temperature = 240 623max_fan_speed = 50 624min_fan_speed = 20 625temperature = 230 626 627[filament:*FLEX_flsunq*] 628inherits = *common_flsunq* 629bed_temperature = 50 630bridge_fan_speed = 80 631compatible_printers_condition = nozzle_diameter[0]>0.35 632cooling = 1 633disable_fan_first_layers = 3 634extrusion_multiplier = 1.15 635fan_always_on = 0 636fan_below_layer_time = 100 637filament_colour = #0000FF 638filament_density = 1.22 639filament_deretract_speed = 25 640filament_max_volumetric_speed = 1.35 641filament_retract_length = 0.8 642filament_retract_lift = nil 643filament_retract_speed = nil 644filament_type = FLEX 645filament_wipe = 0 646first_layer_bed_temperature = 50 647first_layer_temperature = 240 648slowdown_below_layer_time = 10 649start_filament_gcode = "; Filament gcode\n;M900 K0; Disable Linear Advance 1.5\n" 650temperature = 240 651 652[filament:*ABS_flsunq*] 653inherits = *common_flsunq* 654bed_temperature = 90 655bridge_fan_speed = 30 656cooling = 0 657disable_fan_first_layers = 3 658fan_always_on = 0 659fan_below_layer_time = 20 660filament_colour = #FF8000 661filament_density = 1.04 662filament_deretract_speed = nil 663filament_retract_length = 5 664filament_retract_lift = nil 665filament_retract_speed = 50 666filament_max_volumetric_speed = 10 667filament_type = ABS 668filament_wipe = nil 669first_layer_bed_temperature = 90 670first_layer_temperature = 245 671max_fan_speed = 0 672min_fan_speed = 0 673slowdown_below_layer_time = 20 674temperature = 245 675top_fan_speed = 0 676 677[filament:Generic PLA @FLSUN] 678inherits = *PLA_flsunq* 679filament_vendor = Generic 680 681[filament:Generic PLA VASE @FLSUN] 682inherits = *PLA_VASE_flsunq* 683filament_vendor = Generic 684 685[filament:Generic PETG @FLSUN] 686inherits = *PET_flsunq* 687filament_vendor = Generic 688 689[filament:Generic ABS @FLSUN] 690inherits = *ABS_flsunq* 691filament_vendor = Generic 692 693[filament:Generic FLEX @FLSUN] 694inherits = *FLEX_flsunq* 695filament_vendor = Generic 696 697[filament:Generic SPLA @FLSUN] 698inherits = *SPLA_flsunq* 699filament_vendor = Generic 700 701######################################### 702######### end filament presets ########## 703######################################### 704 705######################################### 706######### begin printer presets ######### 707######################################### 708 709# Common printer preset 710[printer:*common_flsunq*] 711printer_technology = FFF 712before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n 713between_objects_gcode = 714deretract_speed = 40 715end_gcode = 716extruder_colour = "" 717extruder_offset = 0x0 718gcode_flavor = marlin 719layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] 720machine_min_extruding_rate = 0,0 721machine_min_travel_rate = 0,0 722max_layer_height = 0.32 723min_layer_height = 0.08 724nozzle_diameter = 0.4 725printer_notes = 726printer_settings_id = 727remaining_times = 0 728retract_before_travel = 2 729retract_before_wipe = 70% 730retract_layer_change = 0 731retract_length = 0 732retract_length_toolchange = 1 733retract_lift = 0 734retract_lift_above = 0 735retract_lift_below = 0 736retract_restart_extra = 0 737retract_restart_extra_toolchange = 0 738silent_mode = 0 739single_extruder_multi_material = 0 740start_gcode = 741toolchange_gcode = 742use_firmware_retraction = 0 743use_relative_e_distances = 1 744variable_layer_height = 1 745wipe = 1 746z_offset = 0 747default_print_profile = 0.20mm QUALITY @FLSUN 748default_filament_profile = Generic PLA @FLSUN 749 750[printer:FLSun QQS Pro] 751inherits = *common_flsunq* 752bed_shape = 129.505x11.3302,128.025x22.5743,125.57x33.6465,122.16x44.4626,117.82x54.9404,112.583x65,106.49x74.5649,99.5858x83.5624,91.9239x91.9239,83.5624x99.5858,74.5649x106.49,65x112.583,54.9404x117.82,44.4626x122.16,33.6465x125.57,22.5743x128.025,11.3302x129.505,7.9602e-15x130,-11.3302x129.505,-22.5743x128.025,-33.6465x125.57,-44.4626x122.16,-54.9404x117.82,-65x112.583,-74.5649x106.49,-83.5624x99.5858,-91.9239x91.9239,-99.5858x83.5624,-106.49x74.5649,-112.583x65,-117.82x54.9404,-122.16x44.4626,-125.57x33.6465,-128.025x22.5743,-129.505x11.3302,-130x1.59204e-14,-129.505x-11.3302,-128.025x-22.5743,-125.57x-33.6465,-122.16x-44.4626,-117.82x-54.9404,-112.583x-65,-106.49x-74.5649,-99.5858x-83.5624,-91.9239x-91.9239,-83.5624x-99.5858,-74.5649x-106.49,-65x-112.583,-54.9404x-117.82,-44.4626x-122.16,-33.6465x-125.57,-22.5743x-128.025,-11.3302x-129.505,-2.38806e-14x-130,11.3302x-129.505,22.5743x-128.025,33.6465x-125.57,44.4626x-122.16,54.9404x-117.82,65x-112.583,74.5649x-106.49,83.5624x-99.5858,91.9239x-91.9239,99.5858x-83.5624,106.49x-74.5649,112.583x-65,117.82x-54.9404,122.16x-44.4626,125.57x-33.6465,128.025x-22.5743,129.505x-11.3302,130x-3.18408e-14 753end_gcode = ; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up\nG1 X0 Y120 F3000 ; present print\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\n;M900 K0 ; reset linear acceleration(Marlin)\n; Shut down printer\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM18 S180 ;disable motors after 180s\nM300 S40 P10 ; Bip\nM117 Print finish. 754machine_max_acceleration_e = 3000,800 755machine_max_acceleration_extruding = 1500,800 756machine_max_acceleration_retracting = 2000,800 757machine_max_acceleration_x = 1500,800 758machine_max_acceleration_y = 1500,800 759machine_max_acceleration_z = 1500,800 760machine_max_feedrate_e = 60,30 761machine_max_feedrate_x = 200,150 762machine_max_feedrate_y = 200,150 763machine_max_feedrate_z = 200,150 764machine_max_jerk_e = 5,5 765machine_max_jerk_x = 5,10 766machine_max_jerk_y = 5,10 767machine_max_jerk_z = 5,10 768max_print_height = 360 769nozzle_diameter = 0.4 770printer_model = QQSP 771printer_variant = 0.4 772printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_QQSP\nPRINTER_HAS_BOWDEN\n 773retract_length = 5 774retract_speed = 30 775retract_lift = 0.4 776silent_mode = 1 777start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200 ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250 ; wait between dual beep\nM300 S440 P200 ; 2nd beep for printer ready\nG4 S10 ; wait to clean the nozzle\nM300 S440 P200 ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started... 778thumbnails = 16x16,260x260 779use_relative_e_distances = 1 780use_volumetric_e = 0 781 782[printer:FLSun QQS Pro 0.6 nozzle] 783inherits = FLSun QQS Pro 784printer_variant = 0.6 785nozzle_diameter = 0.6 786max_layer_height = 0.40 787min_layer_height = 0.15 788default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN 789retract_length = 3.5 790retract_lift = 0.4 791retract_speed = 30 792deretract_speed = 40 793retract_before_wipe = 70% 794retract_before_travel = 1 795 796[printer:FLSun Q5] 797inherits = *common_flsunq* 798bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14 799end_gcode = M107\nM104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\n;M84\nM18 S180 ;disable motors after 180s\n 800machine_max_acceleration_e = 3000 801machine_max_acceleration_extruding = 1500 802machine_max_acceleration_retracting = 2000 803machine_max_acceleration_x = 1500 804machine_max_acceleration_y = 1500 805machine_max_acceleration_z = 1500 806machine_max_feedrate_e = 60 807machine_max_feedrate_x = 200 808machine_max_feedrate_y = 200 809machine_max_feedrate_z = 200 810machine_max_jerk_e = 5 811machine_max_jerk_x = 5 812machine_max_jerk_y = 5 813machine_max_jerk_z = 5 814max_print_height = 200 815nozzle_diameter = 0.4 816printer_model = Q5 817printer_variant = 0.4 818printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_Q5\nPRINTER_HAS_BOWDEN\n 819retract_length = 3 820retract_lift = 0.3 821start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n 822thumbnails = 16x16,200x200 823use_relative_e_distances = 1 824use_volumetric_e = 0 825 826[printer:FLSun Q5 0.6 nozzle] 827inherits = FLSun Q5 828printer_variant = 0.6 829nozzle_diameter = 0.6 830max_layer_height = 0.40 831min_layer_height = 0.15 832default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN 833retract_length = 3 834retract_lift = 0.4 835retract_speed = 50 836deretract_speed = 40 837retract_before_wipe = 0 838retract_before_travel = 1 839 840######################################### 841####### end common print presets ######## 842######################################### 843
