1#
2# Unusual variables checked by this code:
3#	NOP - four byte opcode for no-op (defaults to 0)
4#	NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
5#		empty.
6#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
7#	INITIAL_READONLY_SECTIONS - at start of text segment
8#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
9#		(e.g., .PARISC.milli)
10#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
11#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
12#		(e.g., .PARISC.global)
13#	OTHER_BSS_SECTIONS - other than .bss .sbss ...
14#	OTHER_SECTIONS - at the end
15#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
16#		executable (e.g., _DYNAMIC_LINK)
17#	TEXT_START_SYMBOLS - symbols that appear at the start of the
18#		.text section.
19#	DATA_START_SYMBOLS - symbols that appear at the start of the
20#		.data section.
21#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
22#	OTHER_GOT_SECTIONS - sections just after .got.
23#	OTHER_SDATA_SECTIONS - sections just after .sdata.
24#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
25#		.bss section besides __bss_start.
26#	DATA_PLT - .plt should be in data segment, not text segment.
27#	BSS_PLT - .plt should be in bss segment
28#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
29#	EMBEDDED - whether this is for an embedded system.
30#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
31#		start address of shared library.
32#	INPUT_FILES - INPUT command of files to always include
33#	WRITABLE_RODATA - if set, the .rodata section should be writable
34#	INIT_START, INIT_END -  statements just before and just after
35# 	combination of .init sections.
36#	FINI_START, FINI_END - statements just before and just after
37# 	combination of .fini sections.
38#	STACK_ADDR - start of a .stack section.
39#	OTHER_END_SYMBOLS - symbols to place right at the end of the script.
40#
41# When adding sections, do note that the names of some sections are used
42# when specifying the start address of the next.
43#
44#  Many sections come in three flavours.  There is the 'real' section,
45#  like ".data".  Then there are the per-procedure or per-variable
46#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
47#  and useful for --gc-sections, which for a variable "foo" might be
48#  ".data.foo".  Then there are the linkonce sections, for which the linker
49#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
50#  The exact correspondences are:
51#
52#  Section	Linkonce section
53#  .text	.gnu.linkonce.t.foo
54#  .rodata	.gnu.linkonce.r.foo
55#  .data	.gnu.linkonce.d.foo
56#  .bss		.gnu.linkonce.b.foo
57#  .sdata	.gnu.linkonce.s.foo
58#  .sbss	.gnu.linkonce.sb.foo
59#  .sdata2	.gnu.linkonce.s2.foo
60#  .sbss2	.gnu.linkonce.sb2.foo
61#  .debug_info	.gnu.linkonce.wi.foo
62#  .tdata	.gnu.linkonce.td.foo
63#  .tbss	.gnu.linkonce.tb.foo
64#
65#  Each of these can also have corresponding .rel.* and .rela.* sections.
66test -z "$ENTRY" && ENTRY=_start
67test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
68test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
69if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
70test -z "${ELFSIZE}" && ELFSIZE=32
71test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
72test "$LD_FLAG" = "N" && DATA_ADDR=.
73test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
74test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
75DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
76DATA_SEGMENT_END=""
77if test -n "${COMMONPAGESIZE}"; then
78  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
79  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
80fi
81INTERP=".interp       ${RELOCATING-0} : { *(.interp) }"
82PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
83test -z "$GOT" && GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
84DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
85RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
86STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
87if test -z "${NO_SMALL_DATA}"; then
88  SBSS=".sbss         ${RELOCATING-0} :
89  {
90    ${RELOCATING+PROVIDE (__sbss_start = .);}
91    ${RELOCATING+PROVIDE (___sbss_start = .);}
92    *(.dynsbss)
93    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
94    *(.scommon)
95    ${RELOCATING+PROVIDE (__sbss_end = .);}
96    ${RELOCATING+PROVIDE (___sbss_end = .);}
97  }"
98  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
99  SDATA="/* We want the small data sections together, so single-instruction offsets
100     can access them all, and initialized data all before uninitialized, so
101     we can shorten the on-disk segment size.  */
102  .sdata        ${RELOCATING-0} :
103  {
104    ${RELOCATING+${SDATA_START_SYMBOLS}}
105    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
106  }"
107  SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
108  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
109  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
110  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
111  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
112  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
113  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
114  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
115  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
116fi
117CTOR=".ctors        ${CONSTRUCTING-0} :
118  {
119    ${CONSTRUCTING+${CTOR_START}}
120    /* gcc uses crtbegin.o to find the start of
121       the constructors, so we make sure it is
122       first.  Because this is a wildcard, it
123       doesn't matter if the user does not
124       actually link against crtbegin.o; the
125       linker won't look for a file to match a
126       wildcard.  The wildcard also means that it
127       doesn't matter which directory crtbegin.o
128       is in.  */
129
130    KEEP (*crtbegin*.o(.ctors))
131
132    /* We don't want to include the .ctor section from
133       from the crtend.o file until after the sorted ctors.
134       The .ctor section from the crtend file contains the
135       end of ctors marker and it must be last */
136
137    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
138    KEEP (*(SORT(.ctors.*)))
139    KEEP (*(.ctors))
140    ${CONSTRUCTING+${CTOR_END}}
141  }"
142DTOR=".dtors        ${CONSTRUCTING-0} :
143  {
144    ${CONSTRUCTING+${DTOR_START}}
145    KEEP (*crtbegin*.o(.dtors))
146    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
147    KEEP (*(SORT(.dtors.*)))
148    KEEP (*(.dtors))
149    ${CONSTRUCTING+${DTOR_END}}
150  }"
151STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
152  {
153    ${RELOCATING+_stack = .;}
154    *(.stack)
155  }"
156
157# if this is for an embedded system, don't add SIZEOF_HEADERS.
158if [ -z "$EMBEDDED" ]; then
159   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
160else
161   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
162fi
163
164cat <<EOF
165OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
166	      "${LITTLE_OUTPUT_FORMAT}")
167OUTPUT_ARCH(${OUTPUT_ARCH})
168SEARCH_DIR(.);
169ENTRY(${ENTRY})
170
171${RELOCATING+${LIB_SEARCH_DIRS}}
172${RELOCATING+/* Do we need any of these for elf?
173   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
174${RELOCATING+${EXECUTABLE_SYMBOLS}}
175${RELOCATING+${INPUT_FILES}}
176${RELOCATING- /* For some reason, the Solaris linker makes bad executables
177  if gld -r is used and the intermediate file has sections starting
178  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
179  bug.  But for now assigning the zero vmas works.  */}
180
181SECTIONS
182{
183  /* Read-only sections, merged into text segment: */
184  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
185  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
186  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
187  ${CREATE_SHLIB-${INTERP}}
188  ${INITIAL_READONLY_SECTIONS}
189  ${TEXT_DYNAMIC+${DYNAMIC}}
190  .hash         ${RELOCATING-0} : { *(.hash) }
191  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
192  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
193  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
194  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
195  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
196
197EOF
198if [ "x$COMBRELOC" = x ]; then
199  COMBRELOCCAT=cat
200else
201  COMBRELOCCAT="cat > $COMBRELOC"
202fi
203eval $COMBRELOCCAT <<EOF
204  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
205  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
206  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
207  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
208  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
209  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
210  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
211  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
212  ${OTHER_READONLY_RELOC_SECTIONS}
213  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
214  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
215  .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
216  .rela.tdata	${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
217  .rel.tbss	${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
218  .rela.tbss	${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
219  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
220  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
221  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
222  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
223  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
224  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
225  ${OTHER_GOT_RELOC_SECTIONS}
226  ${REL_SDATA}
227  ${REL_SBSS}
228  ${REL_SDATA2}
229  ${REL_SBSS2}
230  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
231  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
232EOF
233if [ -n "$COMBRELOC" ]; then
234cat <<EOF
235  .rel.dyn      ${RELOCATING-0} :
236    {
237EOF
238sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
239cat <<EOF
240    }
241  .rela.dyn     ${RELOCATING-0} :
242    {
243EOF
244sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
245cat <<EOF
246    }
247EOF
248fi
249cat <<EOF
250  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
251  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
252  ${OTHER_PLT_RELOC_SECTIONS}
253
254  .fixed_vectors ${RELOCATING-0} :
255  {
256	. = .;
257    KEEP (*(.fixed_vectors))
258  } =${NOP-0}
259
260
261  .init         ${RELOCATING-0} :
262  {
263    ${RELOCATING+${INIT_START}}
264    KEEP (*(.init))
265    ${RELOCATING+${INIT_END}}
266  } =${NOP-0}
267
268  ${DATA_PLT-${BSS_PLT-${PLT}}}
269  .text         ${RELOCATING-0} :
270  {
271    ${RELOCATING+${TEXT_START_SYMBOLS}}
272    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
273    /* .gnu.warning sections are handled specially by elf32.em.  */
274    *(.gnu.warning)
275    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
276  } =${NOP-0}
277  .fini         ${RELOCATING-0} :
278  {
279    ${RELOCATING+${FINI_START}}
280    KEEP (*(.fini))
281    ${RELOCATING+${FINI_END}}
282  } =${NOP-0}
283  ${RELOCATING+PROVIDE (__etext = .);}
284  ${RELOCATING+PROVIDE (_etext = .);}
285  ${RELOCATING+PROVIDE (etext = .);}
286  ${WRITABLE_RODATA-${RODATA}}
287  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
288  ${CREATE_SHLIB-${SDATA2}}
289  ${CREATE_SHLIB-${SBSS2}}
290  ${OTHER_READONLY_SECTIONS}
291  .eh_frame_hdr : { *(.eh_frame_hdr) }
292
293  /* Adjust the address for the data segment.  We want to adjust up to
294     the same address within the page on the next page up.  */
295  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
296  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
297  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
298
299  /* Ensure the __preinit_array_start label is properly aligned.  We
300     could instead move the label definition inside the section, but
301     the linker would then create the section even if it turns out to
302     be empty, which isn't pretty.  */
303  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
304  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}}
305  .preinit_array   ${RELOCATING-0} : { *(.preinit_array) }
306  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}}
307
308  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}}
309  .init_array   ${RELOCATING-0} : { *(.init_array) }
310  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}}
311
312  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}}
313  .fini_array   ${RELOCATING-0} : { *(.fini_array) }
314  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}}
315
316  .data         ${RELOCATING-0} :
317  {
318    ${RELOCATING+${DATA_START_SYMBOLS}}
319    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
320    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
321  }
322  .data1        ${RELOCATING-0} : { *(.data1) }
323  .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
324  .tbss		${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
325  .eh_frame     ${RELOCATING-0} : { KEEP (*(.eh_frame)) }
326  .gcc_except_table ${RELOCATING-0} : { *(.gcc_except_table) }
327  ${WRITABLE_RODATA+${RODATA}}
328  ${OTHER_READWRITE_SECTIONS}
329  ${TEXT_DYNAMIC-${DYNAMIC}}
330  ${RELOCATING+${CTOR}}
331  ${RELOCATING+${DTOR}}
332  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
333  ${DATA_PLT+${PLT}}
334  ${RELOCATING+${OTHER_GOT_SYMBOLS}}
335  ${GOT}
336  ${OTHER_GOT_SECTIONS}
337  ${CREATE_SHLIB+${SDATA2}}
338  ${CREATE_SHLIB+${SBSS2}}
339  ${SDATA}
340  ${OTHER_SDATA_SECTIONS}
341  ${RELOCATING+_edata = .;}
342  ${RELOCATING+PROVIDE (edata = .);}
343  ${RELOCATING+__bss_start = .;}
344  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
345  ${SBSS}
346  ${BSS_PLT+${PLT}}
347  .bss          ${RELOCATING-0} :
348  {
349   *(.dynbss)
350   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
351   *(COMMON)
352   /* Align here to ensure that the .bss section occupies space up to
353      _end.  Align after .bss to ensure correct alignment even if the
354      .bss section disappears because there are no input sections.  */
355   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
356  }
357  ${OTHER_BSS_SECTIONS}
358  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
359  ${RELOCATING+_end = .;}
360  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
361  ${RELOCATING+PROVIDE (end = .);}
362  ${RELOCATING+${DATA_SEGMENT_END}}
363
364  /* Stabs debugging sections.  */
365  .stab          0 : { *(.stab) }
366  .stabstr       0 : { *(.stabstr) }
367  .stab.excl     0 : { *(.stab.excl) }
368  .stab.exclstr  0 : { *(.stab.exclstr) }
369  .stab.index    0 : { *(.stab.index) }
370  .stab.indexstr 0 : { *(.stab.indexstr) }
371
372  .comment       0 : { *(.comment) }
373
374  /* DWARF debug sections.
375     Symbols in the DWARF debugging sections are relative to the beginning
376     of the section so we begin them at 0.  */
377
378  /* DWARF 1 */
379  .debug          0 : { *(.debug) }
380  .line           0 : { *(.line) }
381
382  /* GNU DWARF 1 extensions */
383  .debug_srcinfo  0 : { *(.debug_srcinfo) }
384  .debug_sfnames  0 : { *(.debug_sfnames) }
385
386  /* DWARF 1.1 and DWARF 2 */
387  .debug_aranges  0 : { *(.debug_aranges) }
388  .debug_pubnames 0 : { *(.debug_pubnames) }
389
390  /* DWARF 2 */
391  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
392  .debug_abbrev   0 : { *(.debug_abbrev) }
393  .debug_line     0 : { *(.debug_line) }
394  .debug_frame    0 : { *(.debug_frame) }
395  .debug_str      0 : { *(.debug_str) }
396  .debug_loc      0 : { *(.debug_loc) }
397  .debug_macinfo  0 : { *(.debug_macinfo) }
398
399  /* SGI/MIPS DWARF 2 extensions */
400  .debug_weaknames 0 : { *(.debug_weaknames) }
401  .debug_funcnames 0 : { *(.debug_funcnames) }
402  .debug_typenames 0 : { *(.debug_typenames) }
403  .debug_varnames  0 : { *(.debug_varnames) }
404
405  ${STACK_ADDR+${STACK}}
406  ${OTHER_SECTIONS}
407  ${RELOCATING+${OTHER_END_SYMBOLS}}
408  ${RELOCATING+${STACKNOTE}}
409}
410EOF
411