1 /* 2 * (C) Copyright 2001 3 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * board/config.h - configuration options, board specific 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 /* 32 * High Level Configuration Options 33 * (easy to change) 34 */ 35 36 #define CONFIG_405GP 1 /* This is a PPC405 CPU */ 37 #define CONFIG_4xx 1 /* ...member of PPC4xx family */ 38 #define CONFIG_ORSG 1 /* ...on a ORSG board */ 39 40 #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ 41 42 #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ 43 44 #define CONFIG_BAUDRATE 9600 45 #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ 46 47 #undef CONFIG_BOOTARGS 48 #define CONFIG_BOOTCOMMAND "go fff00100" 49 50 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 51 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 52 53 #define CONFIG_PPC4xx_EMAC 54 #define CONFIG_MII 1 /* MII PHY management */ 55 #define CONFIG_PHY_ADDR 0 /* PHY address */ 56 #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ 57 #define CONFIG_NET_MULTI 58 59 60 /* 61 * BOOTP options 62 */ 63 #define CONFIG_BOOTP_BOOTFILESIZE 64 #define CONFIG_BOOTP_BOOTPATH 65 #define CONFIG_BOOTP_GATEWAY 66 #define CONFIG_BOOTP_HOSTNAME 67 68 69 /* 70 * Command line configuration. 71 */ 72 #include <config_cmd_default.h> 73 74 #define CONFIG_CMD_PCI 75 #define CONFIG_CMD_IRQ 76 #define CONFIG_CMD_ASKENV 77 #define CONFIG_CMD_ELF 78 #define CONFIG_CMD_BSP 79 #define CONFIG_CMD_EEPROM 80 81 82 #define CONFIG_MAC_PARTITION 83 #define CONFIG_DOS_PARTITION 84 85 #undef CONFIG_WATCHDOG /* watchdog disabled */ 86 87 #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ 88 89 /* 90 * Miscellaneous configurable options 91 */ 92 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 93 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 94 #if defined(CONFIG_CMD_KGDB) 95 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 96 #else 97 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 98 #endif 99 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 100 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 101 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 102 103 #define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ 104 105 #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ 106 #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ 107 108 #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ 109 #define CONFIG_SYS_BASE_BAUD 691200 110 111 /* The following table includes the supported baudrates */ 112 #define CONFIG_SYS_BAUDRATE_TABLE \ 113 { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ 114 57600, 115200, 230400, 460800, 921600 } 115 116 #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ 117 #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ 118 119 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ 120 121 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ 122 123 /*----------------------------------------------------------------------- 124 * PCI stuff 125 *----------------------------------------------------------------------- 126 */ 127 #define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ 128 #define PCI_HOST_FORCE 1 /* configure as pci host */ 129 #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ 130 131 #define CONFIG_PCI /* include pci support */ 132 #define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */ 133 #undef CONFIG_PCI_PNP /* no pci plug-and-play */ 134 /* resource configuration */ 135 136 #undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ 137 138 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ 139 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0411 /* PCI Device ID: ORSG */ 140 #define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ 141 #define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ 142 #define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ 143 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ 144 #define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ 145 #define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ 146 #define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ 147 148 /*----------------------------------------------------------------------- 149 * Start addresses for the final memory configuration 150 * (Set up by the startup code) 151 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 152 */ 153 #define CONFIG_SYS_SDRAM_BASE 0x00000000 154 #define CONFIG_SYS_FLASH_BASE 0xFFFD0000 155 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 156 #define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */ 157 #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ 158 159 /* 160 * For booting Linux, the board info and command line data 161 * have to be in the first 8 MB of memory, since this is 162 * the maximum mapped by the Linux kernel during initialization. 163 */ 164 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ 165 /*----------------------------------------------------------------------- 166 * FLASH organization 167 */ 168 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 169 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ 170 171 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 172 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 173 174 #define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ 175 #define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ 176 #define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ 177 /* 178 * The following defines are added for buggy IOP480 byte interface. 179 * All other boards should use the standard values (CPCI405 etc.) 180 */ 181 #define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ 182 #define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ 183 #define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ 184 185 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ 186 187 #if 0 /* Use NVRAM for environment variables */ 188 /*----------------------------------------------------------------------- 189 * NVRAM organization 190 */ 191 #define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ 192 #define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */ 193 #define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ 194 #define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */ 195 #define CONFIG_ENV_ADDR \ 196 (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */ 197 #define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */ 198 199 #else /* Use EEPROM for environment variables */ 200 201 #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ 202 #define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ 203 #define CONFIG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */ 204 /* total size of a CAT24WC08 is 1024 bytes */ 205 #endif 206 207 /*----------------------------------------------------------------------- 208 * I2C EEPROM (CAT24WC08) for environment 209 */ 210 #define CONFIG_HARD_I2C /* I2c with hardware support */ 211 #define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ 212 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 213 #define CONFIG_SYS_I2C_SLAVE 0x7F 214 215 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ 216 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ 217 /* mask of address bits that overflow into the "EEPROM chip address" */ 218 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 219 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ 220 /* 16 byte page write mode using*/ 221 /* last 4 bits of the address */ 222 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ 223 224 /* 225 * Init Memory Controller: 226 * 227 * BR0/1 and OR0/1 (FLASH) 228 */ 229 230 #define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */ 231 #define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */ 232 233 /*----------------------------------------------------------------------- 234 * External Bus Controller (EBC) Setup 235 */ 236 237 /* Memory Bank 0 (Flash Bank 0) initialization */ 238 #define CONFIG_SYS_EBC_PB0AP 0x92015480 239 #define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ 240 241 /* Memory Bank 1 (Flash Bank 1) initialization */ 242 #define CONFIG_SYS_EBC_PB1AP 0x92015480 243 #define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */ 244 245 /* Memory Bank 2 (PLD - FPGA-boot) initialization */ 246 #define CONFIG_SYS_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ 247 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/ 248 #define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ 249 250 /* Memory Bank 3 (PLD - OSL) initialization */ 251 #define CONFIG_SYS_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ 252 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/ 253 #define CONFIG_SYS_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */ 254 255 /* Memory Bank 4 (Spartan2 1) initialization */ 256 #define CONFIG_SYS_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ 257 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ 258 #define CONFIG_SYS_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/ 259 260 /* Memory Bank 5 (Spartan2 2) initialization */ 261 #define CONFIG_SYS_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ 262 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ 263 #define CONFIG_SYS_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/ 264 265 /* Memory Bank 6 (Virtex 1) initialization */ 266 #define CONFIG_SYS_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ 267 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ 268 #define CONFIG_SYS_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/ 269 270 /* Memory Bank 7 (Virtex 2) initialization */ 271 #define CONFIG_SYS_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ 272 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ 273 #define CONFIG_SYS_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/ 274 275 276 #define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ 277 278 /*----------------------------------------------------------------------- 279 * Definitions for initial stack pointer and data area (in DPRAM) 280 */ 281 282 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */ 283 #define CONFIG_SYS_TEMP_STACK_OCM 1 284 285 /* On Chip Memory location */ 286 #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 287 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 288 289 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ 290 #define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ 291 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 292 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 293 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 294 295 296 /* 297 * Internal Definitions 298 * 299 * Boot Flags 300 */ 301 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 302 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 303 304 #endif /* __CONFIG_H */ 305