1 /* 2 * (C) Copyright 2003 3 * EMK Elektronik GmbH <www.emk-elektronik.de> 4 * Reinhard Meyer <r.meyer@emk-elektronik.de> 5 * 6 * Configuation settings for the TOP860 board. 7 * 8 * ----------------------------------------------------------------- 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 */ 27 /* 28 * TOP860 is a simple module: 29 * 16-bit wide FLASH on CS0 (2MB or more) 30 * 32-bit wide DRAM on CS2 (either 4MB or 16MB) 31 * FEC with Am79C874 100-Base-T and Fiber Optic 32 * Ports available, but we choose SMC1 for Console 33 * 8k I2C EEPROM at address 0xae, 6k user available, 2k factory set 34 * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock 35 * 36 * This config has been copied from MBX.h / MBX860T.h 37 */ 38 /* 39 * board/config.h - configuration options, board specific 40 */ 41 42 #ifndef __CONFIG_H 43 #define __CONFIG_H 44 45 /* 46 * High Level Configuration Options 47 * (easy to change) 48 */ 49 50 /*----------------------------------------------------------------------- 51 * CPU and BOARD type 52 */ 53 #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ 54 #define CONFIG_MPC860T 1 /* even better... an FEC! */ 55 #define CONFIG_TOP860 1 /* ...on a TOP860 module */ 56 #undef CONFIG_WATCHDOG /* watchdog disabled */ 57 #define CONFIG_IDENT_STRING " EMK TOP860" 58 59 /*----------------------------------------------------------------------- 60 * CLOCK settings 61 */ 62 #define CONFIG_SYSCLK 49152000 63 #define CONFIG_SYS_XTAL 32768 64 #define CONFIG_EBDF 1 65 #define CONFIG_COM 3 66 #define CONFIG_RTC_MPC8xx 67 68 /*----------------------------------------------------------------------- 69 * Physical memory map as defined by EMK 70 */ 71 #define CONFIG_SYS_IMMR 0xFFF00000 /* Internal Memory Mapped Register */ 72 #define CONFIG_SYS_FLASH_BASE 0x80000000 /* FLASH in final mapping */ 73 #define CONFIG_SYS_DRAM_BASE 0x00000000 /* DRAM in final mapping */ 74 #define CONFIG_SYS_FLASH_MAX 0x00400000 /* max FLASH to expect */ 75 #define CONFIG_SYS_DRAM_MAX 0x01000000 /* max DRAM to expect */ 76 77 /*----------------------------------------------------------------------- 78 * derived values 79 */ 80 #define CONFIG_SYS_MF (CONFIG_SYSCLK/CONFIG_SYS_XTAL) 81 #define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK 82 #define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK 83 #define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) 84 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ 85 #define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK 86 87 /*----------------------------------------------------------------------- 88 * FLASH organization 89 */ 90 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 91 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ 92 93 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 94 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 95 96 #define CONFIG_SYS_FLASH_CFI 97 98 /*----------------------------------------------------------------------- 99 * Command interpreter 100 */ 101 #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ 102 #undef CONFIG_8xx_CONS_SMC2 103 #define CONFIG_BAUDRATE 9600 104 105 /* 106 * Allow partial commands to be matched to uniqueness. 107 */ 108 #define CONFIG_SYS_MATCH_PARTIAL_CMD 109 110 111 /* 112 * Command line configuration. 113 */ 114 #include <config_cmd_default.h> 115 116 #define CONFIG_CMD_ASKENV 117 #define CONFIG_CMD_DHCP 118 #define CONFIG_CMD_I2C 119 #define CONFIG_CMD_EEPROM 120 #define CONFIG_CMD_REGINFO 121 #define CONFIG_CMD_IMMAP 122 #define CONFIG_CMD_ELF 123 #define CONFIG_CMD_DATE 124 #define CONFIG_CMD_MII 125 #define CONFIG_CMD_BEDBUG 126 127 128 #define CONFIG_SOURCE 1 129 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 130 #undef CONFIG_LOADS_ECHO /* NO echo on for serial download */ 131 132 133 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 134 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 135 136 #undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot */ 137 138 #ifdef CONFIG_SYS_HUSH_PARSER 139 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 140 #endif 141 142 #if defined(CONFIG_CMD_KGDB) 143 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 144 #else 145 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 146 #endif 147 148 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 149 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 150 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 151 152 /*----------------------------------------------------------------------- 153 * Memory Test Command 154 */ 155 #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ 156 #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ 157 158 /*----------------------------------------------------------------------- 159 * Environment handler 160 * only the first 6k in EEPROM are available for user. Of that we use 256b 161 */ 162 #define CONFIG_SOFT_I2C 163 #define CONFIG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */ 164 #define CONFIG_ENV_OFFSET 0x1000 165 #define CONFIG_ENV_SIZE 0x0700 166 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 167 #define CONFIG_SYS_FACT_OFFSET 0x1800 168 #define CONFIG_SYS_FACT_SIZE 0x0800 169 #define CONFIG_SYS_I2C_FACT_ADDR 0x57 170 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 171 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 172 #define CONFIG_SYS_EEPROM_SIZE 0x2000 173 #define CONFIG_SYS_I2C_SPEED 100000 174 #define CONFIG_SYS_I2C_SLAVE 0xFE 175 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12 176 #define CONFIG_ENV_OVERWRITE 177 #define CONFIG_MISC_INIT_R 178 179 #if defined (CONFIG_SOFT_I2C) 180 #define SDA 0x00010 181 #define SCL 0x00020 182 #define __I2C_DIR immr->im_cpm.cp_pbdir 183 #define __I2C_DAT immr->im_cpm.cp_pbdat 184 #define __I2C_PAR immr->im_cpm.cp_pbpar 185 #define __I2C_ODR immr->im_cpm.cp_pbodr 186 #define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \ 187 __I2C_ODR &= ~(SDA|SCL); \ 188 __I2C_DAT |= (SDA|SCL); \ 189 __I2C_DIR|=(SDA|SCL); } 190 #define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0) 191 #define I2C_SDA(x) { if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; } 192 #define I2C_SCL(x) { if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; } 193 #define I2C_DELAY { udelay(5); } 194 #define I2C_ACTIVE { __I2C_DIR |= SDA; } 195 #define I2C_TRISTATE { __I2C_DIR &= ~SDA; } 196 #endif 197 198 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } 199 200 /*----------------------------------------------------------------------- 201 * defines we need to get FEC running 202 */ 203 #define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */ 204 #define CONFIG_FEC_ENET 1 /* Ethernet only via FEC */ 205 #define FEC_ENET 1 /* eth.c needs it that way... */ 206 #define CONFIG_SYS_DISCOVER_PHY 1 207 #define CONFIG_MII 1 208 #define CONFIG_MII_INIT 1 209 #define CONFIG_PHY_ADDR 31 210 211 /*----------------------------------------------------------------------- 212 * adresses 213 */ 214 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 215 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE 216 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 217 218 /*----------------------------------------------------------------------- 219 * Start addresses for the final memory configuration 220 * (Set up by the startup code) 221 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 222 */ 223 #define CONFIG_SYS_SDRAM_BASE 0x00000000 224 #define CONFIG_SYS_FLASH_BASE 0x80000000 225 226 /*----------------------------------------------------------------------- 227 * Definitions for initial stack pointer and data area (in DPRAM) 228 */ 229 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR 230 #define CONFIG_SYS_INIT_RAM_END 0x2f00 /* End of used area in DPRAM */ 231 #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ 232 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 233 #define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ 234 #define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) 235 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) 236 237 /*----------------------------------------------------------------------- 238 * Cache Configuration 239 */ 240 #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ 241 #if defined(CONFIG_CMD_KGDB) 242 #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ 243 #endif 244 245 /* Interrupt level assignments. 246 */ 247 #define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ 248 249 /* 250 * Internal Definitions 251 * 252 * Boot Flags 253 */ 254 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 255 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 256 257 /*----------------------------------------------------------------------- 258 * Debug Enable Register 259 *----------------------------------------------------------------------- 260 * 261 */ 262 #define CONFIG_SYS_DER 0 /* used in start.S */ 263 264 /*----------------------------------------------------------------------- 265 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 266 *----------------------------------------------------------------------- 267 * set up PLPRCR (PLL, Low-Power, and Reset Control Register) 268 * 12 MF calculated Multiplication factor 269 * 4 0 0000 270 * 1 SPLSS 0 System PLL lock status sticky 271 * 1 TEXPS 1 Timer expired status 272 * 1 0 0 273 * 1 TMIST 0 Timers interrupt status 274 * 1 0 0 275 * 1 CSRC 0 Clock source (0=DFNH, 1=DFNL) 276 * 2 LPM 00 Low-power modes 277 * 1 CSR 0 Checkstop reset enable 278 * 1 LOLRE 0 Loss-of-lock reset enable 279 * 1 FIOPD 0 Force I/O pull down 280 * 5 0 00000 281 */ 282 #define CONFIG_SYS_PLPRCR (PLPRCR_TEXPS | ((CONFIG_SYS_MF-1)<<20)) 283 284 /*----------------------------------------------------------------------- 285 * SYPCR - System Protection Control 11-9 286 * SYPCR can only be written once after reset! 287 *----------------------------------------------------------------------- 288 * set up SYPCR: 289 * 16 SWTC 0xffff Software watchdog timer count 290 * 8 BMT 0xff Bus monitor timing 291 * 1 BME 1 Bus monitor enable 292 * 3 0 000 293 * 1 SWF 1 Software watchdog freeze 294 * 1 SWE 0/1 Software watchdog enable 295 * 1 SWRI 0/1 Software watchdog reset/interrupt select (1=HRESET) 296 * 1 SWP 0/1 Software watchdog prescale (1=/2048) 297 */ 298 #if defined (CONFIG_WATCHDOG) 299 #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ 300 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) 301 #else 302 #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF) 303 #endif 304 305 /*----------------------------------------------------------------------- 306 * SIUMCR - SIU Module Configuration 11-6 307 *----------------------------------------------------------------------- 308 * set up SIUMCR 309 * 1 EARB 0 External arbitration 310 * 3 EARP 000 External arbitration request priority 311 * 4 0 0000 312 * 1 DSHW 0 Data show cycles 313 * 2 DBGC 00 Debug pin configuration 314 * 2 DBPC 00 Debug port pins configuration 315 * 1 0 0 316 * 1 FRC 0 FRZ pin configuration 317 * 1 DLK 0 Debug register lock 318 * 1 OPAR 0 Odd parity 319 * 1 PNCS 0 Parity enable for non memory controller regions 320 * 1 DPC 0 Data parity pins configuration 321 * 1 MPRE 0 Multiprocessor reservation enable 322 * 2 MLRC 11 Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT) 323 * 1 AEME 0 Async external master enable 324 * 1 SEME 0 Sync external master enable 325 * 1 BSC 0 Byte strobe configuration 326 * 1 GB5E 0 GPL_B5 enable 327 * 1 B2DD 0 Bank 2 double drive 328 * 1 B3DD 0 Bank 3 double drive 329 * 4 0 0000 330 */ 331 #define CONFIG_SYS_SIUMCR (SIUMCR_MLRC11) 332 333 /*----------------------------------------------------------------------- 334 * TBSCR - Time Base Status and Control 11-26 335 *----------------------------------------------------------------------- 336 * Clear Reference Interrupt Status, Timebase freezing enabled 337 */ 338 #define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) 339 340 /*----------------------------------------------------------------------- 341 * PISCR - Periodic Interrupt Status and Control 11-31 342 *----------------------------------------------------------------------- 343 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled 344 */ 345 #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) 346 347 /*----------------------------------------------------------------------- 348 * SCCR - System Clock and reset Control Register 15-27 349 *----------------------------------------------------------------------- 350 * set up SCCR (System Clock and Reset Control Register) 351 * 1 0 0 352 * 2 COM 11 Clock output module (00=full, 01=half, 11=off) 353 * 3 0 000 354 * 1 TBS 1 Timebase source (0=OSCCLK, 1=GCLK2) 355 * 1 RTDIV 0 Real-time clock divide (0=/4, 1=/512) 356 * 1 RTSEL 0 Real-time clock select (0=OSCM, 1=EXTCLK) 357 * 1 CRQEN 0 CPM request enable 358 * 1 PRQEN 0 Power management request enable 359 * 2 0 00 360 * 2 EBDF xx External bus division factor 361 * 2 0 00 362 * 2 DFSYNC 00 Division factor for SYNCLK 363 * 2 DFBRG 00 Division factor for BRGCLK 364 * 3 DFNL 000 Division factor low frequency 365 * 3 DFNH 000 Division factor high frequency 366 * 5 0 00000 367 */ 368 #define SCCR_MASK 0 369 #ifdef CONFIG_EBDF 370 #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01) 371 #else 372 #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS) 373 #endif 374 375 /*----------------------------------------------------------------------- 376 * Chip Select 0 - FLASH 377 *----------------------------------------------------------------------- 378 * Preliminary Values 379 */ 380 /* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1 */ 381 #define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR) 382 #define CONFIG_SYS_OR0_PRELIM (-CONFIG_SYS_FLASH_MAX | CONFIG_SYS_OR_TIMING_FLASH) 383 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V ) 384 385 /*----------------------------------------------------------------------- 386 * misc 387 *----------------------------------------------------------------------- 388 * 389 */ 390 /* 391 * Set the autoboot delay in seconds. A delay of -1 disables autoboot 392 */ 393 #define CONFIG_BOOTDELAY 5 394 395 /* 396 * Pass the clock frequency to the Linux kernel in units of MHz 397 */ 398 #define CONFIG_CLOCKS_IN_MHZ 399 400 #define CONFIG_PREBOOT \ 401 "echo;echo" 402 403 #undef CONFIG_BOOTARGS 404 #define CONFIG_BOOTCOMMAND \ 405 "bootp;" \ 406 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ 407 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ 408 "bootm" 409 410 /* 411 * BOOTP options 412 */ 413 #define CONFIG_BOOTP_SUBNETMASK 414 #define CONFIG_BOOTP_GATEWAY 415 #define CONFIG_BOOTP_HOSTNAME 416 #define CONFIG_BOOTP_BOOTPATH 417 #define CONFIG_BOOTP_BOOTFILESIZE 418 419 420 /* 421 * Set default IP stuff just to get bootstrap entries into the 422 * environment so that we can source the full default environment. 423 */ 424 #define CONFIG_ETHADDR 9a:52:63:15:85:25 425 #define CONFIG_SERVERIP 10.0.4.200 426 #define CONFIG_IPADDR 10.0.4.111 427 428 #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ 429 #define CONFIG_SYS_TFTP_LOADADDR 0x00100000 430 431 /* 432 * For booting Linux, the board info and command line data 433 * have to be in the first 8 MB of memory, since this is 434 * the maximum mapped by the Linux kernel during initialization. 435 */ 436 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ 437 438 #endif /* __CONFIG_H */ 439