1 /* 2 * (C) Copyright 2003 3 * MuLogic B.V. 4 * 5 * (C) Copyright 2002 6 * Simple Network Magic Corporation 7 * 8 * (C) Copyright 2000 9 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 10 * 11 * See file CREDITS for list of people who contributed to this 12 * project. 13 * 14 * This program is free software; you can redistribute it and/or 15 * modify it under the terms of the GNU General Public License as 16 * published by the Free Software Foundation; either version 2 of 17 * the License, or (at your option) any later version. 18 * 19 * This program is distributed in the hope that it will be useful, 20 * but WITHOUT ANY WARRANTY; without even the implied warranty of 21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 * GNU General Public License for more details. 23 * 24 * You should have received a copy of the GNU General Public License 25 * along with this program; if not, write to the Free Software 26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 27 * MA 02111-1307 USA 28 */ 29 30 /* 31 * board/config.h - configuration options, board specific 32 */ 33 34 #ifndef __CONFIG_H 35 #define __CONFIG_H 36 37 /* various debug settings */ 38 #undef CONFIG_SYS_DEVICE_NULLDEV /* null device */ 39 #undef CONFIG_SILENT_CONSOLE /* silent console */ 40 #undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */ 41 #undef DEBUG_FLASH /* debug flash code */ 42 #undef FLASH_DEBUG /* debug fash code */ 43 #undef DEBUG_ENV /* debug environment code */ 44 45 #define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */ 46 #define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */ 47 48 49 /* 50 * High Level Configuration Options 51 * (easy to change) 52 */ 53 54 #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ 55 #define CONFIG_QS860T 1 /* ...on a QS860T module */ 56 57 #define CONFIG_FEC_ENET 1 /* FEC 10/100BaseT ethernet */ 58 #define CONFIG_MII 59 #define FEC_INTERRUPT SIU_LEVEL1 60 #undef CONFIG_SCC1_ENET /* SCC1 10BaseT ethernet */ 61 #define CONFIG_SYS_DISCOVER_PHY 62 63 #undef CONFIG_8xx_CONS_SMC1 64 #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC */ 65 #undef CONFIG_8xx_CONS_NONE 66 67 #define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ 68 69 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ 70 71 /* Pass clocks to Linux 2.4.18 in Hz */ 72 #undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */ 73 74 #define CONFIG_PREBOOT "echo;" \ 75 "echo 'Type \\\"run flash_nfs\\\" to mount root filesystem over NFS';" \ 76 "echo" 77 78 #undef CONFIG_BOOTARGS 79 /* TODO compare against CADM860 */ 80 #define CONFIG_BOOTCOMMAND "bootp; " \ 81 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ 82 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ 83 "bootm" 84 85 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 86 #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ 87 88 #undef CONFIG_WATCHDOG /* watchdog disabled */ 89 90 #undef CONFIG_STATUS_LED /* Status LED disabled */ 91 92 #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ 93 94 /* 95 * BOOTP options 96 */ 97 #define CONFIG_BOOTP_SUBNETMASK 98 #define CONFIG_BOOTP_GATEWAY 99 #define CONFIG_BOOTP_HOSTNAME 100 #define CONFIG_BOOTP_BOOTPATH 101 #define CONFIG_BOOTP_BOOTFILESIZE 102 103 104 #define CONFIG_MAC_PARTITION 105 #define CONFIG_DOS_PARTITION 106 107 #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ 108 109 110 /* 111 * Command line configuration. 112 */ 113 #include <config_cmd_default.h> 114 115 #define CONFIG_CMD_REGINFO 116 #define CONFIG_CMD_IMMAP 117 #define CONFIG_CMD_ASKENV 118 #define CONFIG_CMD_NET 119 #define CONFIG_CMD_DHCP 120 #define CONFIG_CMD_DATE 121 122 123 /* TODO */ 124 #if 0 125 /* Look at these */ 126 CONFIG_IPADDR 127 CONFIG_SERVERIP 128 CONFIG_I2C 129 CONFIG_SPI 130 #endif 131 132 /* 133 * Environment variable storage is in NVRAM 134 */ 135 #define CONFIG_ENV_IS_IN_NVRAM 1 136 #define CONFIG_ENV_SIZE 0x00001000 /* We use only the last 4K for PPCBoot */ 137 #define CONFIG_ENV_ADDR 0xD100E000 138 139 /* 140 * Miscellaneous configurable options 141 */ 142 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 143 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 144 145 #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ 146 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 147 148 #if defined(CONFIG_CMD_KGDB) 149 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 150 #else 151 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 152 #endif 153 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 154 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 155 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 156 157 /* TODO - size? */ 158 #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */ 159 #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ 160 161 #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ 162 163 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ 164 165 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 166 167 /*----------------------------------------------------------------------- 168 * Low Level Configuration Settings 169 * (address mappings, register initial values, etc.) 170 * You should know what you are doing if you make changes here. 171 */ 172 /*----------------------------------------------------------------------- 173 * Internal Memory Mapped Register 174 */ 175 #define CONFIG_SYS_IMMR 0xF0000000 176 177 /*----------------------------------------------------------------------- 178 * Definitions for initial stack pointer and data area (in DPRAM) 179 */ 180 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR 181 #define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ 182 #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ 183 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 184 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 185 186 /*----------------------------------------------------------------------- 187 * Start addresses for the final memory configuration 188 * (Set up by the startup code) 189 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 190 */ 191 #define CONFIG_SYS_SDRAM_BASE 0x00000000 192 #define CONFIG_SYS_FLASH_BASE 0xFFF00000 193 194 #define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ 195 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 196 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 197 198 /* 199 * For booting Linux, the board info and command line data 200 * have to be in the first 8 MB of memory, since this is 201 * the maximum mapped by the Linux kernel during initialization. 202 */ 203 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ 204 205 /* TODO flash parameters */ 206 /*----------------------------------------------------------------------- 207 * FLASH organization for Intel Strataflash 208 */ 209 #define CONFIG_SYS_FLASH_16BIT 1 /* 16-bit wide flash memory */ 210 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 211 #define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ 212 213 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 214 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 215 216 #undef CONFIG_ENV_IS_IN_FLASH 217 218 /*----------------------------------------------------------------------- 219 * Cache Configuration 220 */ 221 #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ 222 #if defined(CONFIG_CMD_KGDB) 223 #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ 224 #endif 225 226 /*----------------------------------------------------------------------- 227 * SYPCR - System Protection Control 11-9 228 * SYPCR can only be written once after reset! 229 *----------------------------------------------------------------------- 230 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze 231 */ 232 #if defined(CONFIG_WATCHDOG) 233 #define CONFIG_SYS_SYPCR (0xFFFFFF88 | SYPCR_SWE | SYPCR_SWRI) 234 #else 235 #define CONFIG_SYS_SYPCR 0xFFFFFF88 236 #endif 237 238 /*----------------------------------------------------------------------- 239 * SIUMCR - SIU Module Configuration 11-6 240 *----------------------------------------------------------------------- 241 */ 242 #define CONFIG_SYS_SIUMCR 0x00620000 243 244 /*----------------------------------------------------------------------- 245 * TBSCR - Time Base Status and Control 11-26 246 *----------------------------------------------------------------------- 247 */ 248 #define CONFIG_SYS_TBSCR 0x00C3 249 250 /*----------------------------------------------------------------------- 251 * RTCSC - Real-Time Clock Status and Control Register 11-27 252 *----------------------------------------------------------------------- 253 */ 254 #define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) 255 256 /*----------------------------------------------------------------------- 257 * PISCR - Periodic Interrupt Status and Control 11-31 258 *----------------------------------------------------------------------- 259 */ 260 #define CONFIG_SYS_PISCR 0x0082 261 262 /*----------------------------------------------------------------------- 263 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 264 *----------------------------------------------------------------------- 265 */ 266 #define CONFIG_SYS_PLPRCR 0x0090D000 267 268 /*----------------------------------------------------------------------- 269 * SCCR - System Clock and reset Control Register 15-27 270 *----------------------------------------------------------------------- 271 */ 272 #define SCCR_MASK SCCR_EBDF11 273 #define CONFIG_SYS_SCCR 0x02000000 274 275 276 /*----------------------------------------------------------------------- 277 * Debug Enable Register 278 * 0x73E67C0F - All interrupts handled by BDM 279 * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM 280 *----------------------------------------------------------------------- 281 #define CONFIG_SYS_DER 0x73E67C0F 282 */ 283 #define CONFIG_SYS_DER 0x0082400F 284 285 286 /*----------------------------------------------------------------------- 287 * Memory Controller Initialization Constants 288 *----------------------------------------------------------------------- 289 */ 290 291 /* 292 * BR0 and OR0 (AMD 512K Socketed FLASH) 293 * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation) 294 */ 295 #define CONFIG_SYS_PRELIM_OR_AM 296 #define CONFIG_SYS_OR_TIMING_FLASH 297 298 #define FLASH_BASE0_PRELIM 0xFFF00001 299 #define CONFIG_SYS_OR0_PRELIM 0xFFF80D42 300 #define CONFIG_SYS_BR0_PRELIM 0xFFF00401 301 302 303 /* 304 * BR1 and OR1 (Intel 8M StrataFLASH) 305 * Base address = 0xD000_0000 - 0xD07F_FFFF 306 */ 307 308 #define FLASH_BASE1_PRELIM 0xD0000000 309 #define CONFIG_SYS_OR1_PRELIM 0xFF800D42 310 #define CONFIG_SYS_BR1_PRELIM 0xD0000801 311 /* #define CONFIG_SYS_OR1 0xFF800D42 */ 312 /* #define CONFIG_SYS_BR1 0xD0000801 */ 313 314 315 /* 316 * BR2 and OR2 (SDRAM) 317 * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation) 318 * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation) 319 * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation) 320 * 321 */ 322 #define SDRAM_BASE 0x00000000 /* SDRAM bank */ 323 #define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ 324 325 /* SDRAM timing */ 326 #define SDRAM_TIMING 0x00000A00 327 328 /* For boards with 16M of SDRAM */ 329 #define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */ 330 #define CONFIG_SYS_16M_MBMR 0x18802114 /* Mem Periodic Timer Prescaler */ 331 332 /* For boards with 64M of SDRAM */ 333 #define SDRAM_64M_MAX_SIZE 0x04000000 /* max 64MB SDRAM */ 334 /* TODO - determine real value */ 335 #define CONFIG_SYS_64M_MBMR 0x18802114 /* Mem Period Timer Prescaler */ 336 337 #define CONFIG_SYS_OR2 (SDRAM_PRELIM_OR_AM | SDRAM_TIMING) 338 #define CONFIG_SYS_BR2 (SDRAM_BASE | 0x000000C1) 339 340 341 /* 342 * BR3 and OR3 (NVRAM, Sipex, NAND Flash) 343 * Base address = 0xD100_0000 - 0xD100_FFFF (64K NVRAM) 344 * Base address = 0xD108_0000 - 0xD108_0000 (Sipex chip ctl register) 345 * Base address = 0xD110_0000 - 0xD110_0000 (NAND ctl register) 346 * Base address = 0xD138_0000 - 0xD138_0000 (LED ctl register) 347 * 348 */ 349 350 #define CONFIG_SYS_OR3_PRELIM 0xFFC00DF6 351 #define CONFIG_SYS_BR3_PRELIM 0xD1000401 352 /* #define CONFIG_SYS_OR3 0xFFC00DF6 */ 353 /* #define CONFIG_SYS_BR3 0xD1000401 */ 354 355 356 /* 357 * BR4 and OR4 (Unused) 358 * Base address = 0xE000_0000 - 0xE3FF_FFFF 359 * 360 */ 361 362 #define CONFIG_SYS_OR4_PRELIM 0xFF000000 363 #define CONFIG_SYS_BR4_PRELIM 0xE0000000 364 /* #define CONFIG_SYS_OR4 0xFF000000 */ 365 /* #define CONFIG_SYS_BR4 0xE0000000 */ 366 367 368 /* 369 * BR5 and OR5 (Expansion bus) 370 * Base address = 0xE400_0000 - 0xE7FF_FFFF 371 * 372 */ 373 374 #define CONFIG_SYS_OR5_PRELIM 0xFF000000 375 #define CONFIG_SYS_BR5_PRELIM 0xE4000000 376 /* #define CONFIG_SYS_OR5 0xFF000000 */ 377 /* #define CONFIG_SYS_BR5 0xE4000000 */ 378 379 380 /* 381 * BR6 and OR6 (Expansion bus) 382 * Base address = 0xE800_0000 - 0xEBFF_FFFF 383 * 384 */ 385 386 #define CONFIG_SYS_OR6_PRELIM 0xFF000000 387 #define CONFIG_SYS_BR6_PRELIM 0xE8000000 388 /* #define CONFIG_SYS_OR6 0xFF000000 */ 389 /* #define CONFIG_SYS_BR6 0xE8000000 */ 390 391 392 /* 393 * BR7 and OR7 (Expansion bus) 394 * Base address = 0xEC00_0000 - 0xEFFF_FFFF 395 * 396 */ 397 398 #define CONFIG_SYS_OR7_PRELIM 0xFF000000 399 #define CONFIG_SYS_BR7_PRELIM 0xE8000000 400 /* #define CONFIG_SYS_OR7 0xFF000000 */ 401 /* #define CONFIG_SYS_BR7 0xE8000000 */ 402 403 404 /* 405 * Internal Definitions 406 * 407 * Boot Flags 408 */ 409 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 410 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 411 412 /* 413 * Sanity checks 414 */ 415 #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) 416 #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured 417 #endif 418 419 #endif /* __CONFIG_H */ 420