1 /*
2  *  Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
3  *  Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License as
7  * published by the Free Software Foundation; either version 2 of
8  * the License, or (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18  * MA 02111-1307 USA
19  */
20 
21 #include <common.h>
22 #include <div64.h>
23 #include <netdev.h>
24 #include <asm/io.h>
25 #include <asm/arch/imx-regs.h>
26 #ifdef CONFIG_MXC_MMC
27 #include <asm/arch/mxcmmc.h>
28 #endif
29 
30 /*
31  *  get the system pll clock in Hz
32  *
33  *                  mfi + mfn / (mfd +1)
34  *  f = 2 * f_ref * --------------------
35  *                        pd + 1
36  */
imx_decode_pll(unsigned int pll,unsigned int f_ref)37 unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
38 {
39 	unsigned int mfi = (pll >> 10) & 0xf;
40 	unsigned int mfn = pll & 0x3ff;
41 	unsigned int mfd = (pll >> 16) & 0x3ff;
42 	unsigned int pd =  (pll >> 26) & 0xf;
43 
44 	mfi = mfi <= 5 ? 5 : mfi;
45 
46 	return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn),
47 			(mfd + 1) * (pd + 1));
48 }
49 
clk_in_32k(void)50 static ulong clk_in_32k(void)
51 {
52 	return 1024 * CONFIG_MX27_CLK32;
53 }
54 
clk_in_26m(void)55 static ulong clk_in_26m(void)
56 {
57 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
58 
59 	if (readl(&pll->cscr) & CSCR_OSC26M_DIV1P5) {
60 		/* divide by 1.5 */
61 		return 26000000 * 2 / 3;
62 	} else {
63 		return 26000000;
64 	}
65 }
66 
imx_get_mpllclk(void)67 ulong imx_get_mpllclk(void)
68 {
69 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
70 	ulong cscr = readl(&pll->cscr);
71 	ulong fref;
72 
73 	if (cscr & CSCR_MCU_SEL)
74 		fref = clk_in_26m();
75 	else
76 		fref = clk_in_32k();
77 
78 	return imx_decode_pll(readl(&pll->mpctl0), fref);
79 }
80 
imx_get_armclk(void)81 ulong imx_get_armclk(void)
82 {
83 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
84 	ulong cscr = readl(&pll->cscr);
85 	ulong fref = imx_get_mpllclk();
86 	ulong div;
87 
88 	if (!(cscr & CSCR_ARM_SRC_MPLL))
89 		fref = lldiv((fref * 2), 3);
90 
91 	div = ((cscr >> 12) & 0x3) + 1;
92 
93 	return lldiv(fref, div);
94 }
95 
imx_get_ahbclk(void)96 ulong imx_get_ahbclk(void)
97 {
98 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
99 	ulong cscr = readl(&pll->cscr);
100 	ulong fref = imx_get_mpllclk();
101 	ulong div;
102 
103 	div = ((cscr >> 8) & 0x3) + 1;
104 
105 	return lldiv(fref * 2, 3 * div);
106 }
107 
imx_get_spllclk(void)108 ulong imx_get_spllclk(void)
109 {
110 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
111 	ulong cscr = readl(&pll->cscr);
112 	ulong fref;
113 
114 	if (cscr & CSCR_SP_SEL)
115 		fref = clk_in_26m();
116 	else
117 		fref = clk_in_32k();
118 
119 	return imx_decode_pll(readl(&pll->spctl0), fref);
120 }
121 
imx_decode_perclk(ulong div)122 static ulong imx_decode_perclk(ulong div)
123 {
124 	return lldiv((imx_get_mpllclk() * 2), (div * 3));
125 }
126 
imx_get_perclk1(void)127 ulong imx_get_perclk1(void)
128 {
129 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
130 
131 	return imx_decode_perclk((readl(&pll->pcdr1) & 0x3f) + 1);
132 }
133 
imx_get_perclk2(void)134 ulong imx_get_perclk2(void)
135 {
136 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
137 
138 	return imx_decode_perclk(((readl(&pll->pcdr1) >> 8) & 0x3f) + 1);
139 }
140 
imx_get_perclk3(void)141 ulong imx_get_perclk3(void)
142 {
143 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
144 
145 	return imx_decode_perclk(((readl(&pll->pcdr1) >> 16) & 0x3f) + 1);
146 }
147 
imx_get_perclk4(void)148 ulong imx_get_perclk4(void)
149 {
150 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
151 
152 	return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1);
153 }
154 
155 #if defined(CONFIG_DISPLAY_CPUINFO)
print_cpuinfo(void)156 int print_cpuinfo (void)
157 {
158 	char buf[32];
159 
160 	printf("CPU:   Freescale i.MX27 at %s MHz\n\n",
161 			strmhz(buf, imx_get_mpllclk()));
162 	return 0;
163 }
164 #endif
165 
cpu_eth_init(bd_t * bis)166 int cpu_eth_init(bd_t *bis)
167 {
168 #if defined(CONFIG_FEC_MXC)
169 	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
170 
171 	/* enable FEC clock */
172 	writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
173 	writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
174 	return fecmxc_initialize(bis);
175 #else
176 	return 0;
177 #endif
178 }
179 
180 /*
181  * Initializes on-chip MMC controllers.
182  * to override, implement board_mmc_init()
183  */
cpu_mmc_init(bd_t * bis)184 int cpu_mmc_init(bd_t *bis)
185 {
186 #ifdef CONFIG_MXC_MMC
187 	return mxc_mmc_init(bis);
188 #else
189 	return 0;
190 #endif
191 }
192 
imx_gpio_mode(int gpio_mode)193 void imx_gpio_mode(int gpio_mode)
194 {
195 	struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
196 	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
197 	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
198 	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
199 	unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT;
200 	unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT;
201 	unsigned int tmp;
202 
203 	/* Pullup enable */
204 	if (gpio_mode & GPIO_PUEN) {
205 		writel(readl(&regs->port[port].puen) | (1 << pin),
206 				&regs->port[port].puen);
207 	} else {
208 		writel(readl(&regs->port[port].puen) & ~(1 << pin),
209 				&regs->port[port].puen);
210 	}
211 
212 	/* Data direction */
213 	if (gpio_mode & GPIO_OUT) {
214 		writel(readl(&regs->port[port].ddir) | 1 << pin,
215 				&regs->port[port].ddir);
216 	} else {
217 		writel(readl(&regs->port[port].ddir) & ~(1 << pin),
218 				&regs->port[port].ddir);
219 	}
220 
221 	/* Primary / alternate function */
222 	if (gpio_mode & GPIO_AF) {
223 		writel(readl(&regs->port[port].gpr) | (1 << pin),
224 				&regs->port[port].gpr);
225 	} else {
226 		writel(readl(&regs->port[port].gpr) & ~(1 << pin),
227 				&regs->port[port].gpr);
228 	}
229 
230 	/* use as gpio? */
231 	if (!(gpio_mode & (GPIO_PF | GPIO_AF))) {
232 		writel(readl(&regs->port[port].gius) | (1 << pin),
233 				&regs->port[port].gius);
234 	} else {
235 		writel(readl(&regs->port[port].gius) & ~(1 << pin),
236 				&regs->port[port].gius);
237 	}
238 
239 	/* Output / input configuration */
240 	if (pin < 16) {
241 		tmp = readl(&regs->port[port].ocr1);
242 		tmp &= ~(3 << (pin * 2));
243 		tmp |= (ocr << (pin * 2));
244 		writel(tmp, &regs->port[port].ocr1);
245 
246 		writel(readl(&regs->port[port].iconfa1) & ~(3 << (pin * 2)),
247 				&regs->port[port].iconfa1);
248 		writel(readl(&regs->port[port].iconfa1) | aout << (pin * 2),
249 				&regs->port[port].iconfa1);
250 		writel(readl(&regs->port[port].iconfb1) & ~(3 << (pin * 2)),
251 				&regs->port[port].iconfb1);
252 		writel(readl(&regs->port[port].iconfb1) | bout << (pin * 2),
253 				&regs->port[port].iconfb1);
254 	} else {
255 		pin -= 16;
256 
257 		tmp = readl(&regs->port[port].ocr2);
258 		tmp &= ~(3 << (pin * 2));
259 		tmp |= (ocr << (pin * 2));
260 		writel(tmp, &regs->port[port].ocr2);
261 
262 		writel(readl(&regs->port[port].iconfa2) & ~(3 << (pin * 2)),
263 				&regs->port[port].iconfa2);
264 		writel(readl(&regs->port[port].iconfa2) | aout << (pin * 2),
265 				&regs->port[port].iconfa2);
266 		writel(readl(&regs->port[port].iconfb2) & ~(3 << (pin * 2)),
267 				&regs->port[port].iconfb2);
268 		writel(readl(&regs->port[port].iconfb2) | bout << (pin * 2),
269 				&regs->port[port].iconfb2);
270 	}
271 }
272 
273 #ifdef CONFIG_MXC_UART
mx27_uart_init_pins(void)274 void mx27_uart_init_pins(void)
275 {
276 	int i;
277 	unsigned int mode[] = {
278 		PE12_PF_UART1_TXD,
279 		PE13_PF_UART1_RXD,
280 	};
281 
282 	for (i = 0; i < ARRAY_SIZE(mode); i++)
283 		imx_gpio_mode(mode[i]);
284 
285 }
286 #endif /* CONFIG_MXC_UART */
287 
288 #ifdef CONFIG_FEC_MXC
mx27_fec_init_pins(void)289 void mx27_fec_init_pins(void)
290 {
291 	int i;
292 	unsigned int mode[] = {
293 		PD0_AIN_FEC_TXD0,
294 		PD1_AIN_FEC_TXD1,
295 		PD2_AIN_FEC_TXD2,
296 		PD3_AIN_FEC_TXD3,
297 		PD4_AOUT_FEC_RX_ER,
298 		PD5_AOUT_FEC_RXD1,
299 		PD6_AOUT_FEC_RXD2,
300 		PD7_AOUT_FEC_RXD3,
301 		PD8_AF_FEC_MDIO,
302 		PD9_AIN_FEC_MDC | GPIO_PUEN,
303 		PD10_AOUT_FEC_CRS,
304 		PD11_AOUT_FEC_TX_CLK,
305 		PD12_AOUT_FEC_RXD0,
306 		PD13_AOUT_FEC_RX_DV,
307 		PD14_AOUT_FEC_CLR,
308 		PD15_AOUT_FEC_COL,
309 		PD16_AIN_FEC_TX_ER,
310 		PF23_AIN_FEC_TX_EN,
311 	};
312 
313 	for (i = 0; i < ARRAY_SIZE(mode); i++)
314 		imx_gpio_mode(mode[i]);
315 }
316 #endif /* CONFIG_FEC_MXC */
317 
318 #ifdef CONFIG_MXC_MMC
mx27_sd1_init_pins(void)319 void mx27_sd1_init_pins(void)
320 {
321 	int i;
322 	unsigned int mode[] = {
323 		PE18_PF_SD1_D0,
324 		PE19_PF_SD1_D1,
325 		PE20_PF_SD1_D2,
326 		PE21_PF_SD1_D3,
327 		PE22_PF_SD1_CMD,
328 		PE23_PF_SD1_CLK,
329 	};
330 
331 	for (i = 0; i < ARRAY_SIZE(mode); i++)
332 		imx_gpio_mode(mode[i]);
333 
334 }
335 
mx27_sd2_init_pins(void)336 void mx27_sd2_init_pins(void)
337 {
338 	int i;
339 	unsigned int mode[] = {
340 		PB4_PF_SD2_D0,
341 		PB5_PF_SD2_D1,
342 		PB6_PF_SD2_D2,
343 		PB7_PF_SD2_D3,
344 		PB8_PF_SD2_CMD,
345 		PB9_PF_SD2_CLK,
346 	};
347 
348 	for (i = 0; i < ARRAY_SIZE(mode); i++)
349 		imx_gpio_mode(mode[i]);
350 
351 }
352 #endif /* CONFIG_MXC_MMC */
353