1 #ifndef __CONFIG_H 2 #define __CONFIG_H 3 4 #include "autoconf.h" 5 6 // Configuration definitions. 7 8 //#define BUILD_APPNAME "QEMU" 9 //#define BUILD_CPUNAME8 "QEMUCPU " 10 //#define BUILD_APPNAME6 "QEMU " 11 //#define BUILD_APPNAME4 "QEMU" 12 #define BUILD_APPNAME "Bochs" 13 #define BUILD_CPUNAME8 "BOCHSCPU" 14 #define BUILD_APPNAME6 "BOCHS " 15 #define BUILD_APPNAME4 "BXPC" 16 17 // Maximum number of map entries in the e820 map 18 #define BUILD_MAX_E820 32 19 // Space to reserve in high-memory for tables 20 #define BUILD_MAX_HIGHTABLE (256*1024) 21 // Largest supported externaly facing drive id 22 #define BUILD_MAX_EXTDRIVE 16 23 // Number of bytes the smbios may be and still live in the f-segment 24 #define BUILD_MAX_SMBIOS_FSEG 600 25 // Maximum number of bytes the mptable may be and still be copied to f-segment 26 #define BUILD_MAX_MPTABLE_FSEG 600 27 28 #define BUILD_MODEL_ID 0xFC 29 #define BUILD_SUBMODEL_ID 0x00 30 #define BUILD_BIOS_REVISION 0x01 31 32 // Various memory addresses used by the code. 33 #define BUILD_STACK_ADDR 0x7000 34 #define BUILD_S3RESUME_STACK_ADDR 0x1000 35 #define BUILD_AP_BOOT_ADDR 0x10000 36 #define BUILD_EBDA_MINIMUM 0x90000 37 #define BUILD_LOWRAM_END 0xa0000 38 #define BUILD_ROM_START 0xc0000 39 #define BUILD_BIOS_ADDR 0xf0000 40 #define BUILD_BIOS_SIZE 0x10000 41 #define BUILD_EXTRA_STACK_SIZE 0x800 42 #define BUILD_SMM_INIT_ADDR 0x30000 43 #define BUILD_SMM_ADDR 0xa0000 44 45 #define BUILD_PCIMEM_START 0xe0000000 46 #define BUILD_PCIMEM_END 0xfec00000 /* IOAPIC is mapped at */ 47 #define BUILD_PCIMEM64_START 0x8000000000ULL 48 #define BUILD_PCIMEM64_END 0x10000000000ULL 49 50 #define BUILD_IOAPIC_ADDR 0xfec00000 51 #define BUILD_IOAPIC_ID 0 52 #define BUILD_HPET_ADDRESS 0xfed00000 53 #define BUILD_APIC_ADDR 0xfee00000 54 55 // PCI IRQS 56 #define BUILD_PCI_IRQS ((1<<5) | (1<<9) | (1<<10) | (1<<11)) 57 58 // Important real-mode segments 59 #define SEG_IVT 0x0000 60 #define SEG_BDA 0x0040 61 #define SEG_BIOS 0xf000 62 63 // Segment definitions in protected mode (see rombios32_gdt in misc.c) 64 #define SEG32_MODE32_CS (1 << 3) 65 #define SEG32_MODE32_DS (2 << 3) 66 #define SEG32_MODE16_CS (3 << 3) 67 #define SEG32_MODE16_DS (4 << 3) 68 #define SEG32_MODE16BIG_CS (5 << 3) 69 #define SEG32_MODE16BIG_DS (6 << 3) 70 71 // Debugging levels. If non-zero and CONFIG_DEBUG_LEVEL is greater 72 // than the specified value, then the corresponding irq handler will 73 // report every enter event. 74 #define DEBUG_ISR_02 1 75 #define DEBUG_HDL_05 1 76 #define DEBUG_ISR_08 20 77 #define DEBUG_ISR_09 9 78 #define DEBUG_ISR_0e 9 79 #define DEBUG_HDL_11 2 80 #define DEBUG_HDL_12 2 81 #define DEBUG_HDL_13 10 82 #define DEBUG_HDL_14 2 83 #define DEBUG_HDL_15 9 84 #define DEBUG_HDL_16 9 85 #define DEBUG_HDL_17 2 86 #define DEBUG_HDL_18 1 87 #define DEBUG_HDL_19 1 88 #define DEBUG_HDL_1a 9 89 #define DEBUG_HDL_40 1 90 #define DEBUG_ISR_70 9 91 #define DEBUG_ISR_74 9 92 #define DEBUG_ISR_75 1 93 #define DEBUG_ISR_76 10 94 #define DEBUG_ISR_hwpic1 5 95 #define DEBUG_ISR_hwpic2 5 96 #define DEBUG_HDL_smi 9 97 #define DEBUG_HDL_smp 1 98 #define DEBUG_HDL_pnp 1 99 #define DEBUG_HDL_pmm 1 100 #define DEBUG_HDL_pcibios 9 101 #define DEBUG_HDL_apm 9 102 103 #define DEBUG_unimplemented 2 104 #define DEBUG_invalid 3 105 #define DEBUG_thread 2 106 #define DEBUG_tcg 20 107 108 #endif // config.h 109