1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * Nishanth Menon <nm@ti.com> 7 * 8 * Configuration settings for the TI OMAP3430 Zoom MDK board. 9 * 10 * See file CREDITS for list of people who contributed to this 11 * project. 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License as 15 * published by the Free Software Foundation; either version 2 of 16 * the License, or (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 26 * MA 02111-1307 USA 27 */ 28 29 #ifndef __CONFIG_H 30 #define __CONFIG_H 31 32 /* 33 * High Level Configuration Options 34 */ 35 #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ 36 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 37 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 38 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 39 #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ 40 41 #define CONFIG_SDRC /* The chip has SDRC controller */ 42 43 #include <asm/arch/cpu.h> /* get chip and board defs */ 44 #include <asm/arch/omap3.h> 45 46 /* 47 * Display CPU and Board information 48 */ 49 #define CONFIG_DISPLAY_CPUINFO 1 50 #define CONFIG_DISPLAY_BOARDINFO 1 51 52 /* Clock Defines */ 53 #define V_OSCK 26000000 /* Clock output from T2 */ 54 #define V_SCLK (V_OSCK >> 1) 55 56 #undef CONFIG_USE_IRQ /* no support for IRQs */ 57 #define CONFIG_MISC_INIT_R 58 59 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 60 #define CONFIG_SETUP_MEMORY_TAGS 1 61 #define CONFIG_INITRD_TAG 1 62 #define CONFIG_REVISION_TAG 1 63 64 /* 65 * Size of malloc() pool 66 */ 67 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 68 /* Sector */ 69 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 70 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ 71 /* initial data */ 72 73 /* 74 * Hardware drivers 75 */ 76 77 /* 78 * NS16550 Configuration 79 */ 80 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 81 82 #define CONFIG_SYS_NS16550 83 #define CONFIG_SYS_NS16550_SERIAL 84 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 85 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 86 87 /* 88 * select serial console configuration 89 */ 90 #define CONFIG_CONS_INDEX 3 91 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 92 #define CONFIG_SERIAL3 3 /* UART3 */ 93 94 /* allow to overwrite serial and ethaddr */ 95 #define CONFIG_ENV_OVERWRITE 96 #define CONFIG_BAUDRATE 115200 97 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 98 115200} 99 #define CONFIG_MMC 1 100 #define CONFIG_OMAP3_MMC 1 101 #define CONFIG_DOS_PARTITION 1 102 103 /* DDR - I use Micron DDR */ 104 #define CONFIG_OMAP3_MICRON_DDR 1 105 106 /* USB */ 107 #define CONFIG_MUSB_UDC 1 108 #define CONFIG_USB_OMAP3 1 109 #define CONFIG_TWL4030_USB 1 110 111 /* USB device configuration */ 112 #define CONFIG_USB_DEVICE 1 113 #define CONFIG_USB_TTY 1 114 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 115 /* Change these to suit your needs */ 116 #define CONFIG_USBD_VENDORID 0x0451 117 #define CONFIG_USBD_PRODUCTID 0x5678 118 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 119 #define CONFIG_USBD_PRODUCT_NAME "Zoom1" 120 121 /* commands to include */ 122 #include <config_cmd_default.h> 123 124 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 125 #define CONFIG_CMD_FAT /* FAT support */ 126 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 127 128 #define CONFIG_CMD_I2C /* I2C serial bus support */ 129 #define CONFIG_CMD_MMC /* MMC support */ 130 #define CONFIG_CMD_NAND /* NAND support */ 131 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ 132 133 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 134 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 135 #undef CONFIG_CMD_IMI /* iminfo */ 136 #undef CONFIG_CMD_IMLS /* List all found images */ 137 #undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 138 #undef CONFIG_CMD_NFS /* NFS support */ 139 140 #define CONFIG_SYS_NO_FLASH 141 #define CONFIG_HARD_I2C 1 142 #define CONFIG_SYS_I2C_SPEED 100000 143 #define CONFIG_SYS_I2C_SLAVE 1 144 #define CONFIG_SYS_I2C_BUS 0 145 #define CONFIG_SYS_I2C_BUS_SELECT 1 146 #define CONFIG_DRIVER_OMAP34XX_I2C 1 147 148 /* 149 * TWL4030 150 */ 151 #define CONFIG_TWL4030_POWER 1 152 #define CONFIG_TWL4030_LED 1 153 154 /* 155 * Board NAND Info. 156 */ 157 #define CONFIG_NAND_OMAP_GPMC 158 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 159 /* to access nand */ 160 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 161 /* to access nand at */ 162 /* CS0 */ 163 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 164 165 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 166 /* devices */ 167 #define CONFIG_JFFS2_NAND 168 /* nand device jffs2 lives on */ 169 #define CONFIG_JFFS2_DEV "nand0" 170 /* start of jffs2 partition */ 171 #define CONFIG_JFFS2_PART_OFFSET 0x680000 172 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 173 /* partition */ 174 175 /* Environment information */ 176 #define CONFIG_BOOTDELAY 10 177 178 #define CONFIG_EXTRA_ENV_SETTINGS \ 179 "loadaddr=0x82000000\0" \ 180 "usbtty=cdc_acm\0" \ 181 "console=ttyS2,115200n8\0" \ 182 "videomode=1024x768@60,vxres=1024,vyres=768\0" \ 183 "videospec=omapfb:vram:2M,vram:4M\0" \ 184 "mmcargs=setenv bootargs console=${console} " \ 185 "video=${videospec},mode:${videomode} " \ 186 "root=/dev/mmcblk0p2 rw " \ 187 "rootfstype=ext3 rootwait\0" \ 188 "nandargs=setenv bootargs console=${console} " \ 189 "video=${videospec},mode:${videomode} " \ 190 "root=/dev/mtdblock4 rw " \ 191 "rootfstype=jffs2\0" \ 192 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 193 "bootscript=echo Running bootscript from mmc ...; " \ 194 "source ${loadaddr}\0" \ 195 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 196 "mmcboot=echo Booting from mmc ...; " \ 197 "run mmcargs; " \ 198 "bootm ${loadaddr}\0" \ 199 "nandboot=echo Booting from nand ...; " \ 200 "run nandargs; " \ 201 "nand read ${loadaddr} 280000 400000; " \ 202 "bootm ${loadaddr}\0" \ 203 204 #define CONFIG_BOOTCOMMAND \ 205 "if mmc init; then " \ 206 "if run loadbootscript; then " \ 207 "run bootscript; " \ 208 "else " \ 209 "if run loaduimage; then " \ 210 "run mmcboot; " \ 211 "else run nandboot; " \ 212 "fi; " \ 213 "fi; " \ 214 "else run nandboot; fi" 215 216 #define CONFIG_AUTO_COMPLETE 1 217 /* 218 * Miscellaneous configurable options 219 */ 220 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 221 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 222 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 223 #define CONFIG_SYS_PROMPT "OMAP3 Zoom1 # " 224 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 225 /* Print Buffer Size */ 226 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 227 sizeof(CONFIG_SYS_PROMPT) + 16) 228 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 229 /* Boot Argument Buffer Size */ 230 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 231 232 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ 233 /* works on */ 234 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 235 0x01F00000) /* 31MB */ 236 237 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 238 /* load address */ 239 240 /* 241 * OMAP3 has 12 GP timers, they can be driven by the system clock 242 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 243 * This rate is divided by a local divisor. 244 */ 245 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 246 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 247 #define CONFIG_SYS_HZ 1000 248 249 /*----------------------------------------------------------------------- 250 * Stack sizes 251 * 252 * The stack sizes are set up in start.S using the settings below 253 */ 254 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 255 #ifdef CONFIG_USE_IRQ 256 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 257 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 258 #endif 259 260 /*----------------------------------------------------------------------- 261 * Physical Memory Map 262 */ 263 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 264 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 265 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 266 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 267 268 /* SDRAM Bank Allocation method */ 269 #define SDRC_R_B_C 1 270 271 /*----------------------------------------------------------------------- 272 * FLASH and environment organization 273 */ 274 275 /* **** PISMO SUPPORT *** */ 276 277 /* Configure the PISMO */ 278 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 279 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 280 281 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ 282 /* one chip */ 283 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 284 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 285 286 #define CONFIG_SYS_FLASH_BASE boot_flash_base 287 288 /* Monitor at start of flash */ 289 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 290 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 291 292 #define CONFIG_ENV_IS_IN_NAND 1 293 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 294 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 295 296 #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec 297 #define CONFIG_ENV_OFFSET boot_flash_off 298 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 299 300 /*----------------------------------------------------------------------- 301 * CFI FLASH driver setup 302 */ 303 /* timeout values are in ticks */ 304 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 305 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 306 307 /* Flash banks JFFS2 should use */ 308 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 309 CONFIG_SYS_MAX_NAND_DEVICE) 310 #define CONFIG_SYS_JFFS2_MEM_NAND 311 /* use flash_info[2] */ 312 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 313 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 314 315 #ifndef __ASSEMBLY__ 316 extern unsigned int boot_flash_base; 317 extern volatile unsigned int boot_flash_env_addr; 318 extern unsigned int boot_flash_off; 319 extern unsigned int boot_flash_sec; 320 extern unsigned int boot_flash_type; 321 #endif 322 323 #endif /* __CONFIG_H */ 324