1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * ipmi.h
4  *
5  * MontaVista IPMI interface
6  *
7  * Author: MontaVista Software, Inc.
8  *         Corey Minyard <minyard@mvista.com>
9  *         source@mvista.com
10  *
11  * Copyright 2002 MontaVista Software Inc.
12  *
13  */
14 #ifndef __LINUX_IPMI_H
15 #define __LINUX_IPMI_H
16 
17 #include <uapi/linux/ipmi.h>
18 
19 #include <linux/list.h>
20 #include <linux/proc_fs.h>
21 #include <linux/acpi.h> /* For acpi_handle */
22 
23 struct module;
24 struct device;
25 
26 /*
27  * Opaque type for a IPMI message user.  One of these is needed to
28  * send and receive messages.
29  */
30 struct ipmi_user;
31 
32 /*
33  * Stuff coming from the receive interface comes as one of these.
34  * They are allocated, the receiver must free them with
35  * ipmi_free_recv_msg() when done with the message.  The link is not
36  * used after the message is delivered, so the upper layer may use the
37  * link to build a linked list, if it likes.
38  */
39 struct ipmi_recv_msg {
40 	struct list_head link;
41 
42 	/*
43 	 * The type of message as defined in the "Receive Types"
44 	 * defines above.
45 	 */
46 	int              recv_type;
47 
48 	struct ipmi_user *user;
49 	struct ipmi_addr addr;
50 	long             msgid;
51 	struct kernel_ipmi_msg  msg;
52 
53 	/*
54 	 * The user_msg_data is the data supplied when a message was
55 	 * sent, if this is a response to a sent message.  If this is
56 	 * not a response to a sent message, then user_msg_data will
57 	 * be NULL.  If the user above is NULL, then this will be the
58 	 * intf.
59 	 */
60 	void             *user_msg_data;
61 
62 	/*
63 	 * Call this when done with the message.  It will presumably free
64 	 * the message and do any other necessary cleanup.
65 	 */
66 	void (*done)(struct ipmi_recv_msg *msg);
67 
68 	/*
69 	 * Place-holder for the data, don't make any assumptions about
70 	 * the size or existence of this, since it may change.
71 	 */
72 	unsigned char   msg_data[IPMI_MAX_MSG_LENGTH];
73 };
74 
75 /* Allocate and free the receive message. */
76 void ipmi_free_recv_msg(struct ipmi_recv_msg *msg);
77 
78 struct ipmi_user_hndl {
79 	/*
80 	 * Routine type to call when a message needs to be routed to
81 	 * the upper layer.  This will be called with some locks held,
82 	 * the only IPMI routines that can be called are ipmi_request
83 	 * and the alloc/free operations.  The handler_data is the
84 	 * variable supplied when the receive handler was registered.
85 	 */
86 	void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg,
87 			       void                 *user_msg_data);
88 
89 	/*
90 	 * Called when the interface detects a watchdog pre-timeout.  If
91 	 * this is NULL, it will be ignored for the user.
92 	 */
93 	void (*ipmi_watchdog_pretimeout)(void *handler_data);
94 
95 	/*
96 	 * If not NULL, called at panic time after the interface has
97 	 * been set up to handle run to completion.
98 	 */
99 	void (*ipmi_panic_handler)(void *handler_data);
100 
101 	/*
102 	 * Called when the interface has been removed.  After this returns
103 	 * the user handle will be invalid.  The interface may or may
104 	 * not be usable when this is called, but it will return errors
105 	 * if it is not usable.
106 	 */
107 	void (*shutdown)(void *handler_data);
108 };
109 
110 /* Create a new user of the IPMI layer on the given interface number. */
111 int ipmi_create_user(unsigned int          if_num,
112 		     const struct ipmi_user_hndl *handler,
113 		     void                  *handler_data,
114 		     struct ipmi_user      **user);
115 
116 /*
117  * Destroy the given user of the IPMI layer.  Note that after this
118  * function returns, the system is guaranteed to not call any
119  * callbacks for the user.  Thus as long as you destroy all the users
120  * before you unload a module, you will be safe.  And if you destroy
121  * the users before you destroy the callback structures, it should be
122  * safe, too.
123  */
124 int ipmi_destroy_user(struct ipmi_user *user);
125 
126 /* Get the IPMI version of the BMC we are talking to. */
127 int ipmi_get_version(struct ipmi_user *user,
128 		     unsigned char *major,
129 		     unsigned char *minor);
130 
131 /*
132  * Set and get the slave address and LUN that we will use for our
133  * source messages.  Note that this affects the interface, not just
134  * this user, so it will affect all users of this interface.  This is
135  * so some initialization code can come in and do the OEM-specific
136  * things it takes to determine your address (if not the BMC) and set
137  * it for everyone else.  Note that each channel can have its own
138  * address.
139  */
140 int ipmi_set_my_address(struct ipmi_user *user,
141 			unsigned int  channel,
142 			unsigned char address);
143 int ipmi_get_my_address(struct ipmi_user *user,
144 			unsigned int  channel,
145 			unsigned char *address);
146 int ipmi_set_my_LUN(struct ipmi_user *user,
147 		    unsigned int  channel,
148 		    unsigned char LUN);
149 int ipmi_get_my_LUN(struct ipmi_user *user,
150 		    unsigned int  channel,
151 		    unsigned char *LUN);
152 
153 /*
154  * Like ipmi_request, but lets you specify the number of retries and
155  * the retry time.  The retries is the number of times the message
156  * will be resent if no reply is received.  If set to -1, the default
157  * value will be used.  The retry time is the time in milliseconds
158  * between retries.  If set to zero, the default value will be
159  * used.
160  *
161  * Don't use this unless you *really* have to.  It's primarily for the
162  * IPMI over LAN converter; since the LAN stuff does its own retries,
163  * it makes no sense to do it here.  However, this can be used if you
164  * have unusual requirements.
165  */
166 int ipmi_request_settime(struct ipmi_user *user,
167 			 struct ipmi_addr *addr,
168 			 long             msgid,
169 			 struct kernel_ipmi_msg  *msg,
170 			 void             *user_msg_data,
171 			 int              priority,
172 			 int              max_retries,
173 			 unsigned int     retry_time_ms);
174 
175 /*
176  * Like ipmi_request, but with messages supplied.  This will not
177  * allocate any memory, and the messages may be statically allocated
178  * (just make sure to do the "done" handling on them).  Note that this
179  * is primarily for the watchdog timer, since it should be able to
180  * send messages even if no memory is available.  This is subject to
181  * change as the system changes, so don't use it unless you REALLY
182  * have to.
183  */
184 int ipmi_request_supply_msgs(struct ipmi_user     *user,
185 			     struct ipmi_addr     *addr,
186 			     long                 msgid,
187 			     struct kernel_ipmi_msg *msg,
188 			     void                 *user_msg_data,
189 			     void                 *supplied_smi,
190 			     struct ipmi_recv_msg *supplied_recv,
191 			     int                  priority);
192 
193 /*
194  * Poll the IPMI interface for the user.  This causes the IPMI code to
195  * do an immediate check for information from the driver and handle
196  * anything that is immediately pending.  This will not block in any
197  * way.  This is useful if you need to spin waiting for something to
198  * happen in the IPMI driver.
199  */
200 void ipmi_poll_interface(struct ipmi_user *user);
201 
202 /*
203  * When commands come in to the SMS, the user can register to receive
204  * them.  Only one user can be listening on a specific netfn/cmd/chan tuple
205  * at a time, you will get an EBUSY error if the command is already
206  * registered.  If a command is received that does not have a user
207  * registered, the driver will automatically return the proper
208  * error.  Channels are specified as a bitfield, use IPMI_CHAN_ALL to
209  * mean all channels.
210  */
211 int ipmi_register_for_cmd(struct ipmi_user *user,
212 			  unsigned char netfn,
213 			  unsigned char cmd,
214 			  unsigned int  chans);
215 int ipmi_unregister_for_cmd(struct ipmi_user *user,
216 			    unsigned char netfn,
217 			    unsigned char cmd,
218 			    unsigned int  chans);
219 
220 /*
221  * Go into a mode where the driver will not autonomously attempt to do
222  * things with the interface.  It will still respond to attentions and
223  * interrupts, and it will expect that commands will complete.  It
224  * will not automatcially check for flags, events, or things of that
225  * nature.
226  *
227  * This is primarily used for firmware upgrades.  The idea is that
228  * when you go into firmware upgrade mode, you do this operation
229  * and the driver will not attempt to do anything but what you tell
230  * it or what the BMC asks for.
231  *
232  * Note that if you send a command that resets the BMC, the driver
233  * will still expect a response from that command.  So the BMC should
234  * reset itself *after* the response is sent.  Resetting before the
235  * response is just silly.
236  *
237  * If in auto maintenance mode, the driver will automatically go into
238  * maintenance mode for 30 seconds if it sees a cold reset, a warm
239  * reset, or a firmware NetFN.  This means that code that uses only
240  * firmware NetFN commands to do upgrades will work automatically
241  * without change, assuming it sends a message every 30 seconds or
242  * less.
243  *
244  * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means.
245  */
246 int ipmi_get_maintenance_mode(struct ipmi_user *user);
247 int ipmi_set_maintenance_mode(struct ipmi_user *user, int mode);
248 
249 /*
250  * When the user is created, it will not receive IPMI events by
251  * default.  The user must set this to TRUE to get incoming events.
252  * The first user that sets this to TRUE will receive all events that
253  * have been queued while no one was waiting for events.
254  */
255 int ipmi_set_gets_events(struct ipmi_user *user, bool val);
256 
257 /*
258  * Called when a new SMI is registered.  This will also be called on
259  * every existing interface when a new watcher is registered with
260  * ipmi_smi_watcher_register().
261  */
262 struct ipmi_smi_watcher {
263 	struct list_head link;
264 
265 	/*
266 	 * You must set the owner to the current module, if you are in
267 	 * a module (generally just set it to "THIS_MODULE").
268 	 */
269 	struct module *owner;
270 
271 	/*
272 	 * These two are called with read locks held for the interface
273 	 * the watcher list.  So you can add and remove users from the
274 	 * IPMI interface, send messages, etc., but you cannot add
275 	 * or remove SMI watchers or SMI interfaces.
276 	 */
277 	void (*new_smi)(int if_num, struct device *dev);
278 	void (*smi_gone)(int if_num);
279 };
280 
281 int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher);
282 int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher);
283 
284 /*
285  * The following are various helper functions for dealing with IPMI
286  * addresses.
287  */
288 
289 /* Return the maximum length of an IPMI address given it's type. */
290 unsigned int ipmi_addr_length(int addr_type);
291 
292 /* Validate that the given IPMI address is valid. */
293 int ipmi_validate_addr(struct ipmi_addr *addr, int len);
294 
295 /*
296  * How did the IPMI driver find out about the device?
297  */
298 enum ipmi_addr_src {
299 	SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS,
300 	SI_PCI,	SI_DEVICETREE, SI_PLATFORM, SI_LAST
301 };
302 const char *ipmi_addr_src_to_str(enum ipmi_addr_src src);
303 
304 union ipmi_smi_info_union {
305 #ifdef CONFIG_ACPI
306 	/*
307 	 * the acpi_info element is defined for the SI_ACPI
308 	 * address type
309 	 */
310 	struct {
311 		acpi_handle acpi_handle;
312 	} acpi_info;
313 #endif
314 };
315 
316 struct ipmi_smi_info {
317 	enum ipmi_addr_src addr_src;
318 
319 	/*
320 	 * Base device for the interface.  Don't forget to put this when
321 	 * you are done.
322 	 */
323 	struct device *dev;
324 
325 	/*
326 	 * The addr_info provides more detailed info for some IPMI
327 	 * devices, depending on the addr_src.  Currently only SI_ACPI
328 	 * info is provided.
329 	 */
330 	union ipmi_smi_info_union addr_info;
331 };
332 
333 /* This is to get the private info of struct ipmi_smi */
334 extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
335 
336 #define GET_DEVICE_ID_MAX_RETRY		5
337 
338 #endif /* __LINUX_IPMI_H */
339